Tip: How to export WITH volume and pan automation

It is astonishingly simple and I am probably not the first to think of this (...): Do not automate the volume fader and the panpot *on the track*, but insert a Gain plugin and automate its' gain and balance parameters. Those automations will be used when exporting.
If the instrument has a master volume, you can also automate that, and the same goes when an instrument has a master pan setting. If you automate those, it will be exported.
regards, Erik.

lordofthestrings86 wrote:
You are referring to bouncing down the whole mix to like an .aiff or .wav right?
Err... no, wrong... I am referring to Exporting (regions, tracks & all tracks) only. As a default, Volume and Pan Automation are not included when Exporting. Send -, Plug In -, Solo - and Mute automation are included. Some people have asked about that in the past, and it can be handy in specific situations. That's all.
regards, Erik.
Message was edited by: Eriksimon

Similar Messages

How to export an album and keep images in the same order in elements 11 mac

I made an album of my trip to Australia (lots of pictures) and changed the order of the images (not the same as shooting order) and when I export the images in the album to a folder or memorystick, the images are copied to that place but I lost the album order of the images.
How can I prevent that, without having to renumber al 500 images separatly?
Gr Jos

Thanks for the tip, Michel
It worked like a charm…
cheers Jos
Op 28 okt. 2013, om 18:49 heeft MichelBParis <[email protected]> het volgende geschreven:
Re: How to export an album and keep images in the same order in elements 11 mac
created by MichelBParis in Photoshop Elements - View the full discussion
JosU a écrit:
I made an album of my trip to Australia (lots of pictures) and changed the order of the images (not the same as shooting order) and when I export the images in the album to a folder or memorystick, the images are copied to that place but I lost the album order of the images.
How can I prevent that, without having to renumber al 500 images separatly?
Gr Jos
The order in album is only kept in the organizer database, so the only way not to lose that order is to rename files.
If you are using the 'export' function, select your album in custom order, select all photos and in the dialog, choose to rename with a common base name.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5794538#5794538
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5794538#5794538
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5794538#5794538. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help with volume and screen rotation.

Having trouble with volume and rotation. I have gone through the setting and made changes to lock screen and mute, but now it seems I have to choose between the two. The switch on the side also is not working. Any suggestions?

1. If Side Switch is set to Mute, check to make sure it's not muted
http://i1224.photobucket.com/albums/ee374/Diavonex/1237fb40.jpg
2. Check the Volume buttons
http://i1224.photobucket.com/albums/ee374/Diavonex/6a787edc3564e00c2ca6b70d4f236 e8b.jpg
3. Double-click the Home button; swipe the Task Bar to the right. Check the Mute and Volume settings.
http://i1224.photobucket.com/albums/ee374/Diavonex/acd1c239.jpg

Need Tips to Customise Invoice with Logo and Adjust Rows and Values

Need Tips to Customise Invoice with Logo and Adjust Rows and Values

Hi rabisaha,
Your logo is an image. Details on adding and working with images in Numbers can be found in Chapter 9 of the Numbers '09 User Guide.
Rows are part of a Table. I'm not certain what you are referring to when you say "adjust rows," but the details regarding adding, removing and changing rows are in the "Working with Rows and Columns in Tables" section of Chapter 3, Using Tables in the Numbers '09 User Guide.
Adjusting values is done by entering new values, or by revising the formulas that create values. This is also conered in the User Guide in Chapter 4, Working with Table Cells.
The Numbers '09 User Guide is free, and may be downloaded via the Help menu in Numbers. If you intend to create Numbers tables (or to modify formulas), you may also want the iWork Formulas and Functions User Guide, available from th same location.
For anyone new to Numbers (and for old hands as well), I recommend reading at least the first four chapters of the Numbers guide. The rest can be kept to use as a reference as needed.
Regards,
Barry

ST03 Export: How to export all instances and task types?

I am exporting ST03 data using SAP GUI
I can export data for a single task type and a single instance.Is there a way I can export the Time Profile data for all instances and all task types in a single export? Can I do a single export rather than NxM exports?
Also, when I export to a text file, there is a header that reports the instance, data, and task type. When I export to excel file I only get the table, not the header info. Is there a way to to get the header info into the excel export?
Is this the appropriate forum for these questions?
Any help is appreciated.
Thanks.
Tim

I moved this question to an ABAP forum. Here's the [thread|ST03 Export: How to export all instances and task types?;.
Tim

Delete hyper draws (volume and Pan)

How can hyper draws (volume aund pan) be deleted from audio files in Logic Pro?

Lots of CC's in this topic...

Need headset with volume and mic keys

In Nokia, there is no headset in budget..
The only budget with stylish headset I feel is coloud wh - 510 only.. I like to buy.. But I need volume key also.. Because always a music lovers have earphone everywhere and here music any times and different situation.. We maximum kept mobile in pocket while travel etc etc.. Each time for adjusting volume or play pause ,, we feel tough to take out and change.. If u make a headset with volume and multi function key means then it will be a super budget and very successful headset in India.

arvi2512 wrote:
In Nokia, there is no headset in budget..
The only budget with stylish headset I feel is coloud wh - 510 only.. I like to buy.. But I need volume key also.. Because always a music lovers have earphone everywhere and here music any times and different situation.. We maximum kept mobile in pocket while travel etc etc.. Each time for adjusting volume or play pause ,, we feel tough to take out and change.. If u make a headset with volume and multi function key means then it will be a super budget and very successful headset in India.
Please take a look at the Nokia WH-920 Purity Headset - http://www.nokia.com/global/products/accessory/wh-920
Availability is limited and may vary per region.
Good luck

How to export to excel and format and send email?

Hi all,
I have an sql query that i need to run daily. My question is: how can i create a procedure to export the query result to an excel file with font Arial size 9 with all columns streched for best fit and also sent-it via email with subject and email text to an email address?
Thanks in advance for your help.
PS: if possible please provide examples :)

I didnt use the .bat file.
file1.sql
SET ECHO OFF
SET TERMOUT OFF
SET FEEDBACK OFF
SET TIMING OFF
SET PAUSE OFF
SET PAGESIZE 0
SET LINESIZE 255
SET HEAD OFF
SET TRIMSPOOL ON
spool c:\file1.xls
set feed off markup html on spool on
your Sql Goes here or @@file2.sql
set markup html off spool off
quit;
you'll get file.xls
Here's how it executed.
SQL> SET ECHO OFF
SQL> SET TERMOUT OFF
SQL> SET FEEDBACK OFF
SQL> SET TIMING OFF
SQL> SET PAUSE OFF
SQL> SET PAGESIZE 0
SQL> SET LINESIZE 255
SQL> SET HEAD OFF
SQL> SET TRIMSPOOL ON
SQL> spool c:\file2.xls
SQL> set feed off markup html on spool on
SQL> select table_name,last_analyzed from user_tables;
<br>
<p>
<table border="1" width="90%">
<tr>
<td>
CDR2_TEMP
</td>
<td>
</td>
</tr>
<tr>
<td>
CDR2_TEMP2
</td>
<td>
</td>
</tr>
<tr>
<td>
DBA_LOCKS_TEMP
</td>
<td>
</td>
</tr>
<tr>
<td>
LOCK_HOLDERS
</td>
<td>
</td>
</tr>
<tr>
<td>
OLTP_STATS
</td>
<td>
</td>
</tr>
<tr>
<td>
SESSION_KILL_INFO
</td>
<td>
</td>
</tr>
<tr>
<td>
EMP_CLONE
</td>
<td>
</td>
</tr>
<tr>
<td>
QUERY_CLONE
</td>
<td>
</td>
</tr>
<tr>
<td>
ASSET_ID
</td>
<td>
</td>
</tr>
<tr>
<td>
ADDR_CLONE
</td>
<td>
</td>
</tr>
<tr>
<td>
CLONE
</td>
<td>
</td>
</tr>
<tr>
<td>
REQUEST_CLONE
</td>
<td>
27-MAY-08
</td>
</tr>
<tr>
<td>
T1
</td>
<td>
</td>
</tr>
<tr>
<td>
TEMP_ACC_POL
</td>
<td>
</td>
</tr>
</table>
<p>
SQL>

[INFO TIPS] How to survive with Ovi Maps 3.0 insta...

Quick info tips. I wanna made this post earlier but I was on few days trip so didn't have a chance... but it's good coz I was tested GPS in real touristic environment.
I'm from Europe so I don't know how all links posted below will be works for people outside Europe.
My hardware: E63 with latest firmware + external GPS module LD-4W
Everything what we do here, we do with phone connected to the PC via USB cable in PC Suite mode and with fully battery charged.
If you have Maps 2.0, everything works well for you and you payed for any of licences - better stay with that version and don't touch Ovi Maps 3.0. Waste of time and nerves.
1. Please make phone data backup in PC Suite. Please make data backup of your memory card.
2. Check if you have firmware upgrade for your phone (click on some icon in PC Suite). But if you have cracked Symbian and you using cracked software better stay away from firmware upgrade. There's new cracking method for newest firmwares, ask Google. I don't use it, I'm clean. If you have new firmware - update the phone.
3. Download MapLoader - http://europe.nokia.com/explore-services/maps/download-maps/map-loader Do fresh install or update old MapLoader
4. Bluetooth MUST BE turn in phone. Why? Ask Nokia. -_- Just kidding but unfortunately it's not funny. Without Bluetooth Ovi Maps 3.0 installed in next step (6.) is crazy as hell. Application is completly unusable, skipping, switching... one big hell on the screen. I don't know how it looks like in phones with build in GPS module.
5. Download Ovi Maps 3.0 - http://europe.nokia.com/explore-services/maps/download-maps and update with this installer old Maps 2.0 in the phone.
6. Run Ovi Maps 3.0 and allow to download via Internet connection in your phone (wifi, gsm, 3g) some portion of initial data - 300 or 400kB - something like that, up to 1MB maximum then disconnect from Internet. It's needed to save some file (I don't remember name) and make structure of catalogues on memory card.
7. Leave Ovi Maps 3.0 and run MapLoader. This application is one big pain in **bleep**. Sometimes doesn't see your phone, sometimes doesn't recognize correctly your memory card size (when you are finished downloading your map/s data that stupid soft can say to you "you don't have" or something like that)... horrible! If something goes wrong - try restart your PC and phone then connect again via USB cable - still in PC Suite mode.
8. When luckily you have maps on your phone, try to pair your phone with your GPS module via Bluetooth or turn on build in module in other models (I think it works like that?).
9. When you will be look out for licence for walk navigation... you cannot find it. You can see only your region name (in my case it was Europe) and you have an option to buy... licenses for drivers. ROTFL! Licence for walk navigation is "hidden option". You must go here - http://europe.nokia.com/get-support-and-software/product-support/maps-support/how-to/how-to--use-map... - it's mini FAQ how to obtain it.
What I see, there's NO MORE free trial licenses in Maps v3.0 You must pay from day one. I buyed that licence for walk navigation for 10,12E (10 euro 12 euro cents) and it's not time restricted - looks like lifetime, ofc for the phone that you use (I think). Other licenses (for drivers) are time restricted (30 days and up as I remember).
Everything works fine for me. I was over 220km away from my hometown in awesome town Wrocław and Ovi Maps 3.0 helps me A LOT with navigation and searching for monuments in this town.
Marcin
NOKIA IN USE: N8

Ad. 1) "...Please make data backup of your memory card."
Because maybe you must be format memory card for proper maps installation (instead upgrade from Ovi Maps 3.0 installation level old installed maps from v2.0).
NOKIA IN USE: N8

How to export a user and their schema from one 10g database to another?

Hi,
I would like to export a user and their entire schema from one 10g database to another one. How do I do this?
thx
adam

If you want to export a user and the schema owned to the user, and import to the same user in a different database, or a different user in the same database, you can use the exp and imp commands as described in the Utilities manual.
These commands are very versatile and have a lot of options - well worth learning properly. To give you a simplistic shortcut, see below - I create a user 'test_move', create some objects in the schema, export, create a new user in the database 'new_move' and import.
oracle@fuzzy:~> sqlplus system/?????
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Mar 11 21:46:54 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> create user test_move identified by test_move;
User created.
SQL> grant create session, resource to test_move;
Grant succeeded.
SQL> connect test_move/test_move
Connected.
SQL> create table test (x number);
Table created.
SQL> insert into test values (1);
1 row created.
SQL> exit
Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
oracle@fuzzy:~> exp system/????? file=exp.dmp owner=test_move
Export: Release 10.2.0.1.0 - Production on Sat Mar 11 21:48:34 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Export done in AL32UTF8 character set and AL16UTF16 NCHAR character set
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user TEST_MOVE
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user TEST_MOVE
About to export TEST_MOVE's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export TEST_MOVE's tables via Conventional Path ...
. . exporting table                           TEST          1 rows exported
. exporting synonyms
. exporting views
. exporting stored procedures
. exporting operators
. exporting referential integrity constraints
. exporting triggers
. exporting indextypes
. exporting bitmap, functional and extensible indexes
. exporting posttables actions
. exporting materialized views
. exporting snapshot logs
. exporting job queues
. exporting refresh groups and children
. exporting dimensions
. exporting post-schema procedural objects and actions
. exporting statistics
Export terminated successfully without warnings.
oracle@fuzzy:~> sqlplus system/?????
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Mar 11 21:49:23 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> create user new_move identified by new_move;
User created.
SQL> grant create session, resource to new_move;
Grant succeeded.
SQL> exit
Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
oracle@fuzzy:~> imp system/????? file=exp.dmp fromuser=test_move touser=new_move
Import: Release 10.2.0.1.0 - Production on Sat Mar 11 21:50:12 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Export file created by EXPORT:V10.02.01 via conventional path
import done in AL32UTF8 character set and AL16UTF16 NCHAR character set
. importing TEST_MOVE's objects into NEW_MOVE
. . importing table                         "TEST"          1 rows imported
Import terminated successfully without warnings.
oracle@fuzzy:~>                                                       If moving between databases, remember to set the SID properly before the import. If keeping the same userid, skip the from/to stuff in the import.
There are many variations on the theme ...
You can simplify this. You can select tables individually. You can use a parameter file. You can transport all the constraints and data. You can skip the data and only move the definitions. You can get some help (imp/exp help=yes).
And, if it's all 10g, there is a new and improved facility called expdp/impdp (dp = data pump) which has a lot more capability as well, including direct transfer (no intermediate file) together with suspend/restart. Also documented in the Utilities manual.

Adjusting volume and pan curves in real time

Can I adjust my volume curves and pan curves while i'm doing playback?
Example, in pro tools when you play back, with you controller you can change the volum or pan as you want and it "memorizes" you movements. Can garageband do this? or do I have to make them all myself?
Also doesn anyone know if this feature, along with retard and tempo changes, and a different metronome going to be offered in a new version of garageband?

You have to create the curves by hand
As for the future, anyone that knows about coming features would be under NDA, and speculation is against the ToS in this forum B-(>

Volume and pan

So i am working on a widget and I cant seem to get the volume
and balance sliders to work right. Can someone take a look at my
code and see if you know what going wrong. The web address of the
widget is www.buttonbeats.com/sequence.html . The only slider that
works is the first one for now. Till i figure out why this one wont
work. and the action script is below.

ok so things are now working except that the volume slider
works upside down. Could you take a look and let me know how I can
flip the volume slider upside down. the swf is located
www.buttonbeats.com/sequence.swf
var myvolumebounds:Rectangle=new Rectangle(volumegroove_mc.x,
volumegroove_mc.y, 1, volumegroove_mc.height);
var mybalancebounds:Rectangle=new
Rectangle(balancegroove_mc.x, balancegroove_mc.y,
balancegroove_mc.width, 1);
volume_mc.addEventListener(MouseEvent.MOUSE_DOWN,
startdragvolume);
//volume_mc.addEventListener(MouseEvent.MOUSE_OUT, stopdrag);
volume_mc.addEventListener(MouseEvent.MOUSE_UP, stopdrag);
balance_mc.addEventListener(MouseEvent.MOUSE_DOWN,
startdragbalance);
//balance_mc.addEventListener(MouseEvent.MOUSE_OUT,
stopdrag);
balance_mc.addEventListener(MouseEvent.MOUSE_UP, stopdrag);
function startdragvolume(myevent:MouseEvent):void{
myevent.target.startDrag(false, myvolumebounds);
function startdragbalance(myevent:MouseEvent):void{
myevent.target.startDrag(false, mybalancebounds);
function stopdrag(myevent:MouseEvent):void{
myevent.target.stopDrag();
var myRequest:URLRequest=new URLRequest ("inst.mp3");
var mySound:Sound = new Sound();
var myChannel:SoundChannel;
var newSetting:SoundTransform = new SoundTransform();
mySound.load(myRequest);
myChannel=mySound.play();
stage.addEventListener(Event.ENTER_FRAME, everyframe);
function everyframe(myevent:Event):void{
var newvolume:Number = (volume_mc.y-volumegroove_mc.y)/100;
var newbalance:Number =
((balance_mc.x-balancegroove_mc.x)/27)-1;
trace (newbalance);
newSetting.volume=newvolume;
newSetting.pan=newbalance;
myChannel.soundTransform=newSetting;
stage.addEventListener(Event.ENTER_FRAME, everyframe2);
function everyframe2(event:Event):void {
leftbar.scaleY=(myChannel.leftPeak);
rightbar.scaleY=(myChannel.rightPeak);

How to export internal table and pass the internal table to another screen?

Hi,
I have a sql SELECT statement that select data from table into internal table. I would like to export out the internal table and pass to another screen and display the data in ALV list. How to export it out? I try but the error given was " The type of "OUT_SELECT_ITAB" cannot be converted to the type of "itab_result".
Another question is, how to pass the internal table that i export out from the function module to another screen?
Here is the code
==============================================================
FUNCTION ZNEW_SELECT_ZSTUD00.
""Local Interface:
*" IMPORTING
*"     REFERENCE(IN_SELECT_YEAR) TYPE ZSTUD00-EYEAR
*" EXPORTING
*"     REFERENCE(OUT_RESULT) TYPE CHAR9
*"     REFERENCE(OUT_SELECT_ITAB) TYPE ZSTUD00
*& Global Declarations
DATA: itab TYPE ZSTUD00,
      itab_result TYPE TABLE OF ZSTUD00.
*& Processing Blocks called by the Runtime Environment
itab-eyear = IN_SELECT_YEAR.
SELECT *
FROM ZSTUD00
INTO TABLE itab_result
WHERE eyear = IN_SELECT_YEAR.
IF sy-subrc = 0.
out_result = 'Success'.
OUT_SELECT_ITAB = itab_result.
ELSE.
out_result = 'Fail'.
ENDIF.
ENDFUNCTION.
===============================================================
Please advise. Thanks
Regards,
Rayden

Hi Nagaraj,
I try to change it in Tables tab page but it state that TABLES parameters are obsolete. when i "Enter". I try to "Enter" again. it seem to be ok but it stil give me the same error.
================================================================
FUNCTION ZNEW_SELECT_ZSTUD00.
""Local Interface:
*" IMPORTING
*"     REFERENCE(IN_SELECT_YEAR) TYPE ZSTUD00-EYEAR
*" EXPORTING
*"     REFERENCE(OUT_RESULT) TYPE CHAR9
*" TABLES
*"      OUT_SELECT_ITAB STRUCTURE ZSTUD00
*& Global Declarations
DATA: itab TYPE ZSTUD00,
      itab_result TYPE TABLE OF ZSTUD00.
*& Processing Blocks called by the Runtime Environment
itab-eyear = IN_SELECT_YEAR.
SELECT *
FROM ZSTUD00
INTO TABLE itab_result
WHERE eyear = IN_SELECT_YEAR.
IF sy-subrc = 0.
out_result = 'Success'.
OUT_SELECT_ITAB = itab_result.
ELSE.
out_result = 'Fail'.
ENDIF.
ENDFUNCTION.
===============================================================
regards,
Rayden

How to start with FPGA and LABVIEW when you do not know any computer language? Only have exposure to Windows OS.

Myself is an Electronics Engineer. But I don't have any exposure to any comp language like C or whatever. I do not have any exposure to Labview as well. I've been involved in design and developing Digital Circuits like interlock units, Position monitoring and display systems etc. Now I want to work upon FPGA based circuits. Can anyone suggest me plz that how to start with?

Hi BNarendra;
Here are some resources that can be useful, the first is an introduction to LabVIEW and the other ones are for LabVIEW FPGA.
LabVIEW
http://zone.ni.com/devzone/cda/tut/p/id/5247
LabVIEW FPGA
http://www.ni.com/swf/presentation/us/labview/lvfpga/default.htm
http://digital.ni.com/public.nsf/allkb/0697A6F4BFC6E152862570FA0072153A?OpenDocument
http://zone.ni.com/devzone/cda/tut/p/id/3261
I hope the information is useful.
Good Luck!
Francisco Arellano
National Instruments Mexico
Field Systems Engineer - Energy Segment
www.ni.com/soporte

How to deal with conflict and potential conflict classes?

Some classes are marked as conflict and potential conflict classes in the Classloader Analysis Tool.
How to deal with them?
How to use suggested solutions?

Not double load them.
Conflicting classes can lead to weird exceptions. One obvious example would be if you package
an older servlet.jar version into your application and use the weblogic classloading features, such
as prefer-web-inf-classes, to tell weblogic to use this class instead of the one provided in the
system classpath. This one example which leads to weird exceptions, such as connot process jsp tag...
If you really need a the version of the jar for your application, you have to test it through and through
so that you know you do not run into weird production errors.

Tip: How to export WITH volume and pan automation

Similar Messages

Maybe you are looking for