Tip of head phones broke off and is stuck in the audio jack.
I plugged in my head phones and the tip of the part that plugs in to the audio jack broke off and is know stuck in there. How do I get it out?
i Got the same problem here, any help ppl! I cant use the live chat function on the apple site for some reason :S.
What ive tryed so far:
-tweezers
-Glue( one little drop on the end of the broken plug, put it in and pull)
Any other ideas :S?
Maybe ill just send it to apple anyway PLZ HELP!
Similar Messages
-
The tip of an audio cable broke off and is lodged in the mac lap top audio port. Any advice on how to remove it?
https://discussions.apple.com/thread/3554135?start=30&tstart=0
Best. -
After I was done listening to some music, I of course puller out the EarPods from the headphone jack. But then I noticed how the tip broke into 2, so half of the tip is stuck in the headphone jack. Since they were Apple EarPods, and I didn't inflict any damage to them, would I receive a free repair or replacement on my iPad?
Are you still under warranty? You're going to have a tough time convincing them it wasn't your fault they broke, I predict. In any case, someone else had a good idea on one of these types of threads: take it to an electronics shop as they probably deal with this situation quite frequently.
-
My cord for my speaker broke of and a part in still inside the headphone jack(and the back of my i mac) so I have no sound now. is this something I can fix or do ihave to take in
It is better to take the computer to the Apple store to have it removed.
Genius Bar reservation:
http://www.apple.com/retail/geniusbar/
Best. -
My itouch will not turn off and is stuck with the apple symbol as if it is downloading an update.
My itouch is stuck with the apple symbol as if it was downloading something. I have tried to reset it by turning it off but it will not turn off. Any suggestions?
Hi,
Try placing your iPod in Recovery Mode and restoring it via iTunes: http://support.apple.com/kb/HT1808.
Hope this helps!
---likeabird--- -
The tip of my headphones broke off and is now stuck inside my ipod,How do I get it out?
My ipod (4th gen.) fell in my bathroom while it had the headphones in.The headphone had came out but I just picked it up and didnt look at it.I plugged my ipod in and left for an hour or so,when i came back I wanted to listen to my music.I tried plugging my headphone in but the wouldnt go n,then I noticed the tip wasnt on my headphones.I looked inside my ipod and I noticed it was in there and that it was stuck.I want to emove it,but I dont know how.....Please get back to me!!!!
Broken headphone jack! 3.5mm dillemma....: Apple Support Communities
How do I remove 3.5 tip of a headphone...: Apple Support Communities -
How do I wipe everything off, and go back to the way the phone was set when I got it?
How do I wipe everything off, and go back to the way the phone was set when I got it? I am thinking that might be the only way to fix my wifi issue. Thanks!
Hello, if you havent tried the doesktop manager option, you can do it from the device aswell... Just make sure you save all your contacts to your SIM.
you can go into your Security Options (in Options menu) and select wipe handheld.
1). Please thank those who help you by clicking the beside the 'Reply' button.
2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
3). Remember to have fun! We are all in this together!
4). Follow me on -
after installing the latest IOS 5 on my iphone 4, my phone went off and all i can see now is an apple logo.i can´t even open it.. what to do now?please help.. thanks
thanks a lot.. its ok now..
-
i was mid facetime call and my phone turned off and wouldnt turn on until i plugged it in. then the date was wrong,it said no service, and wont let me turn wifi on. also it wont stay on for more than a few minutes at a time. Help?
Sounds like a hardware failure.
Make an appointment at the genius bar and take it in for them to look at. It will probably need to be replaced. -
I recently got my iPhone 5 unlocked and the other day I updated my phone to ios 7. After doing so my phone shut off and turned on and it said I had no service. I guess it completely wiped out my unlock. I was wondering if anyone knows what I can do to fix it!!
How, EXACTLY, did you get it "unlocked"? ONLY the carrier it's locked to can authorize unlocking it. Anything else is a hack.
You can not get help here for a hacked phone. -
i bought htc 8x verizon employee edition and when i update it and during installation with my error phone get off and now phone stuck on some wheel running thing and wont get on please tell me if i could download the rom or anything also
Hi mnomi! Sorry to learn of the trouble you're running into with your new phone! Have you already switched the device via your My Verizon : http://vz.to/16lkVUY Once you have done this, and verify the sim card is inserted securely, the activation will begin. If the phone is stuck on the wheel and you cannot move forward, you may want to do an alternative reset. Please follow the below instructions:
1) Ensure the device is powered off.
2) Press and hold the Volume Down button (located on the right edge) until instructed to release in step 4.
3) Press and hold the Power button (located on the top-right edge) until the device vibrates (approximately 2 seconds) then release.
4) When the restore screen appears (exclamation mark), release the Volume Down button.
5) From the restore screen, press then release the following keys to initiate the reset process:
1. Volume Up button
2. Volume Down button
3. Power button
4. Volume Down button
*Allow several minutes for the process to complete (rotating gears appear on the display to indicate that the reset is in progress).
If you have any further questions or concerns, please let us know. Keep us posted if this resolves your concerns. Thanks!
-KristieQ_VZW
Follow us on Twitter @VZW Support -
Hello: My 4s phone turned off and when I tried to restore I got a 4014 error. What is this error and how do I restore the phone?
Hello Linda,
Thank you for the details of the error you are getting when trying to restore your iPhone. I recommend the steps below for error 4014:
Error 4000, 4005, 4013, 4014, and 4016
After you perform each step, try to restore your device.
Restart your computer.
Disconnect all your USB devices from your computer and connect to another USB port.
Use a different USB cable.
Uninstall third-party security software.
Try restoring using an alternate computer.
You can find the full article here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694#error4000
Thank you for using Apple Support Communities.
Best,
Sheila M. -
i-phone shuts off, I have to hold the home and power button at the same time to get the icon to show up. Then have to hold the home button. I'm restoring my phone multiple times a day just to get it to work. help!
Are you restoring as new?
-
i was updating to ios7 and my phone turned off and now it wont turn back on. it shows the apple sign but it slowly fades away and so on. Help!
Hello there, RFJA2211.
The following Knowledge Base article offers up some great troubleshooting steps for unexpected power off of your iOS device:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
HT201210 My phone turned off and will not turn back on. Nor will it charge.
My phone turned off and will not turn back on. Nor will it charge.
So bring the phone to Apple. Not much we users here can do for you.
Maybe you are looking for
-
How can I get applications to open in the same tab/window I am working in. In IE it was very simple. Its just a check-box under internet options. I cannot figure it out with Firefox yet == This happened == Every time Firefox opened == i started using
-
I would like to know if there is a way to report on records that have been merged through Portal? It would be nice to be able to report which records have been merged over a time period (like within the last month), but if that is not possible, I am
-
Printing Problems with Canon Pixma MP830 under 10.5.5.
Hi All. Strange one here. I'll try to keep it short. A client just bought a 24" iMac (running Leopard 10.5.5) and all was great until they tried to connect their Canon Pixma MP830 to it. The client installed connected the printer to the USB port in b
-
Hi, I created a new table 'STUD' with columns 'STUD_NO','STUD_NAME' and 'FEES' in it. I inserted the data insert into stud values (001,'xxxx',2000); insert into stud values (002,'yyyy',3000); when I selecting the data using SELECT statement... it is
-
Froyo OTA Update broke my Exchange Account!
I received the "official" OTA update last night for my Droid and installed it this morning. My corporate exchange account worked wonderfully before the installation and has been since I got the phone on it's release date. After the installation, it