Tip on using US Robotics Modem (WPA/WPA2 not supported)

Dear all,
As I can see from the discussions many of us have gone through the pain of installing Time Capsule wishing we had instead bought a good hard disk.
I have a US Robotics MaxG which serves as a router and I plan to put the time machine in a different room away as well from my MacBook Pro. I mean after all that is the point of wireless (not havig to connect the time capsule to the US Robotics modem).
Unfortunately, I managed to isolate a problem and found a workaround to it. It seems that Time Capsule does not like WPA2/WPA passwords.
So what you need to do is to use instead WPA2 encryption with TKIP and AES selected.
Thanks and good luck,
Sergio

Dear jdimstrnate,
Based on your description both the AUX port and the modem are not configured correctly. You can find detailed instructions for this setup in the following link from Cisco:
http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0080094bbc.shtml
In summary, the AUX port needs to be set at a speed of 115200 and the modem must be configured with AT&F1S0=1&W.
If you need further assistance please feel free to contact our technical support line, 1-888-216-2850. Our hours of operation are Monday through Friday, 9 AM to 5 PM CST. You can also contact us by email using our online email form from the following link:
http://www.usr.com/support/s-online_EmailTechie.asp
I hope this helps.

Similar Messages

  • WPA/WPA2 Enterprise Support -  Please Apple PLEASE!

    I have been searching through this discussion board and I have found many discussions like this one.
    http://discussions.apple.com/thread.jspa?threadID=1106197&tstart=0
    People who complain of not being prompted for a Username and Password for WiFi access are complaining of lack of WPA/WPA2 Enterprise Support for Apple's iPhone. Many college campuses, major workplaces and public libraries use WPA/WPA2 Enterprise support, which prompt you for a Username AND Password.
    Why doesn't Apple's iPhone support one of the most common WiFi protocal's in today's world?
    If Apple doesn't implement WPA/WPA2 Enterprise support, many people are going to look for alternative ways to connecting to a WPA/WPA2 Enterprise WiFi network with their iPhones. Example: hacking their iPhone and using a risky 3rd party application.
    I STRONGLY recommend to Apple to get on this as soon as possible...
    Does anyone know if Apple is working on this currently?
    Thank You!

    This is a user to user help forum only so no one here knows what Apple is working on.
    http://www.apple.com/feedback/iphone.html

  • Message uses a character set that is not supported by the internet service

    Does any one have any advice on how to fix this problem?
    E-mails sent from my iphone 3G periodically arrive in an unreadable form at the recipient. The body of the e-mail has been replaced with the message "This message uses a character set that is not supported by the internet service...." The problem e-mails also include an attachment that contains an unformatted text file containing the original message surrounded by what appears to be lots of formatting data that is displayed as gibberish.
    This occurs sometimes, but not always, even with the same recipients. I am sending e-mail through a G-mail account that is configured on the iphone using IMAP. I have tried the gmail account to use the two available formatting options for mail, but neither fixes the problem.
    I have also upgraded to 2.01 and restored a few times without impact.

    Hi,
    I got somewhat similar problem with special charecters(German umlaud �,�,�..).
    I create a file with java having special charecters in it. Now if I open this file I am able to view the special charecters in it.But If I attach this file send it using following code then receiver can not see the umlaud charecters in it.They get replaced by _ or ?
    MimeBodyPart mbp2 = new MimeBodyPart();
    FileDataSource fds = new FileDataSource(fileName);
    mbp2.setDataHandler(new DataHandler(fds));
    mbp2.setFileName(output.getName());
    Multipart mp = new MimeMultipart();
    mp.addBodyPart(mbp2);
    msg.setContent(mp);
    Transport.send(msg);
    From you message it looks like you are able to send the mail attachment correctly(by preserving special charecters).
    Can you tell me what might be wrong in my code.
    I appriciate your efforts in advance.
    Prasad

  • Hi, I just purchased Adobe Illustrator and I cant find the serial number. When I try to download using Cloud it says it does not support my computer system. Just yesterday I finished my trial. What shall i do?

    I just purchased Adobe Illustrator and I cant find the serial number. When I try to download using Cloud it says it does not support my computer system. Just yesterday I finished my trial. What shall i do?

    To locate the serial number:
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html

  • Error: The Boot Camp partition "/dev/disk0s3" used by Hard Disk 1 is not supported.

    I installed Lion a couple of weeks ago, and had Parallels 5 installed, but it would no longer run.  Unfortunately, I spent the money to upgrade to Parallels 6 prior to seeing the advice to get Lion to run with 5.  Oh well.  But now, it won't run with 6 either.  What to do?
    Here;s the error again:
    The Boot Camp partition "/dev/disk0s3" used by Hard Disk 1 is not supported.

    You should be able to do this using the Boot Camp Assistant app. There is an option to "Restore the startup disk to a single volume". That should eliminate the Boot Camp partition without harming your Mac OS partition. Even so, make sure you back up your Mac OS X partition data before you do this, just to be safe.
    Lance

  • ORA-13207: incorrect use of the [More than 2D not supported] operator

    Oracle 8.1.7.4:
    The same query works in an Oracle DB on Linux and Windows, but in a Solaris it gives me the following error:
    cc_redes_met_coaxial@ORAG2> SELECT lot_f.lot_id id,
    ROUND(MDSYS.SDO_GEOM.SDO_DISTANCE(lot_geom.geometry, ped_geom.geometry, 0.5),2) dist
    FROM lot_f,
    pedestal_f,
    G_GEOMETRY_0 lot_geom,
    2 G_GEOMETRY_0 ped_geom
    WHERE lot_f.feat_num = lot_geom.feat_num
    3 AND pedestal_f.acc_point_id = 611
    AND pedestal_f.feat_num = ped_geom.feat_num
    4 AND lot_f.g_version+0 = 0
    AND (lot_f.g_next_version > 0 OR lot_f.g_next_version IS NULL)
    5 AND pedestal_f.g_version+0 = 0
    6 AND (pedestal_f.g_next_version > 0 OR pedestal_f.g_next_version IS NULL)
    AND MDSYS.SDO_WITHIN_DISTANCE(lot_geom.geometry, ped_geom.geometry,'distance = 100' ) = 'TRUE';
    7 8 9 10 11 12 13 14 SELECT lot_f.lot_id id,
    ERROR at line 1:
    ORA-29902: error in executing ODCIIndexStart() routine
    ORA-13207: incorrect use of the [More than 2D not supported] operator
    ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 84
    ORA-06512: at line 1
    The data is in 3D. I took a look at the trace file but no useful information. It does not have to be 2d, right?
    I can use SDO_WITHIN_DISTANCE with data in 3d, can't I?
    Does anyone know what is going on? Maybe a bug?
    Regards,
    Alex

    Daniel,
    I created the spatial index in 2d, but if I collect stats on all tables the optimizer doesn't use the spatial index.
    I tried to influence the optimizer using hints, but it seems to ignore the hint clause. The query I did is above:
    SELECT /*+ INDEX(lot_geom G_GEOMETRY_0_SI) INDEX(ped_geom G_GEOMETRY_0_SI) */
         lot_f.lot_id id,
    ROUND(MDSYS.SDO_GEOM.SDO_DISTANCE(lot_geom.geometry, ped_geom.geometry, 0.5),2) dist
    FROM lot_f,
    pedestal_f,
    G_GEOMETRY_0 lot_geom,
    G_GEOMETRY_0 ped_geom
    WHERE lot_f.feat_num = lot_geom.feat_num
    AND pedestal_f.acc_point_id = 611
    AND pedestal_f.feat_num = ped_geom.feat_num
    AND lot_f.g_version+0 = 0
    AND (lot_f.g_next_version > 0 OR lot_f.g_next_version IS NULL)
    AND pedestal_f.g_version+0 = 0
    AND (pedestal_f.g_next_version > 0 OR pedestal_f.g_next_version IS NULL)
    AND MDSYS.SDO_WITHIN_DISTANCE(lot_geom.geometry, ped_geom.geometry,
    'distance = 100' ) = 'TRUE';
    So I "forced" a plan that uses the spatial indexes deleting the statistics from the tables that have geometry columns. The execution plan looks like this:
    Execution Plan
    0 SELECT STATEMENT Optimizer=CHOOSE (Cost=2652 Card=10182 Bytes=79969428)
    1 0 CONCATENATION
    2 1 NESTED LOOPS (Cost=876 Card=3428 Bytes=26923512)
    3 2 NESTED LOOPS (Cost=121 Card=1078 Bytes=8450442)
    4 3 NESTED LOOPS (Cost=4 Card=33 Bytes=129492)
    5 4 TABLE ACCESS (FULL) OF 'PEDESTAL_F' (Cost=1 Card=1 Bytes=16)
    6 4 TABLE ACCESS (BY INDEX ROWID) OF 'G_GEOMETRY_0' (Cost=3 Card=3268 Bytes=12771344)
    7 6 INDEX (RANGE SCAN) OF 'G_GEOMETRY_0_PRIMARY' (UNIQUE) (Cost=2 Card=3268)
    8 3 TABLE ACCESS (BY INDEX ROWID) OF 'G_GEOMETRY_0' (Cost=121 Card=3268 Bytes=12794220)
    9 8 DOMAIN INDEX OF 'G_GEOMETRY_0_SI' (Cost=51)
    10 2 TABLE ACCESS (BY INDEX ROWID) OF 'LOT_F' (Cost=1 Card=318 Bytes=4770)
    11 10 INDEX (RANGE SCAN) OF 'GI_LOT_F0_FEAT_NUM_0' (UNIQUE) (Cost=1 Card=318)
    12 1 NESTED LOOPS (Cost=876 Card=3428 Bytes=26923512)
    13 12 NESTED LOOPS (Cost=121 Card=1078 Bytes=8450442)
    14 13 NESTED LOOPS (Cost=4 Card=33 Bytes=129492)
    15 14 TABLE ACCESS (FULL) OF 'PEDESTAL_F' (Cost=1 Card=1 Bytes=16)
    16 14 TABLE ACCESS (BY INDEX ROWID) OF 'G_GEOMETRY_0' (Cost=3 Card=3268 Bytes=12771344)
    17 16 INDEX (RANGE SCAN) OF 'G_GEOMETRY_0_PRIMARY' (UNIQUE) (Cost=2 Card=3268)
    18 13 TABLE ACCESS (BY INDEX ROWID) OF 'G_GEOMETRY_0' (Cost=121 Card=3268 Bytes=12794220)
    19 18 DOMAIN INDEX OF 'G_GEOMETRY_0_SI' (Cost=51)
    20 12 TABLE ACCESS (BY INDEX ROWID) OF 'LOT_F' (Cost=1 Card=318 Bytes=4770)
    21 20 INDEX (RANGE SCAN) OF 'GI_LOT_F0_FEAT_NUM_0' (UNIQUE) (Cost=1 Card=318)
    But when I executed the query, I got:
    cc_redes_met_coaxial@ORAG2> /
    ROUND(MDSYS.SDO_GEOM.SDO_DISTANCE(lot_geom.geometry, ped_geom.geometry, 0.5),2) dist
    ERROR at line 2:
    ORA-03113: end-of-file on communication channel
    Collecting stats on geometry tables makes the query work only because it doesn't use the spatial index.
    I took a look the trace file, but I didn't see any interesting information. I can send you if you want.
    Do you have any clue?
    Regards,
    Alex

  • TS3274 Every time I try to play Amazon video on iPad, it shows "our Internet connection is currently using an HTTP proxy, content playbacks not supported when a proxy is configured". Though I can play it on iPhone which has same Internet connection. Plz h

    Every time I try to play Amazon video on iPad, it shows "our Internet connection is currently using an HTTP proxy, content playbacks not supported when a proxy is configured". Though I can play it on iPhone which has same Internet connection.
    Can any one please help?

    This helped me
    http://mashtips.com/amazon-instant-video-http-proxy-error-on-ipad/

  • I cannot open my Hotmail emails from Firefox. I have been on the hotmail Help Forum and they suggest to use Internet Explorer. Does Forefox not support Hotmail now?

    Hi,
    I can log into hotmail but cannot open my emails or go to Sent items or anything. I have gone on the Hotmail Help Forum and MANY people are having the same problem. Hotmail say we should use Internet explorer and they do not really answer about using Firefox.
    People using Firefox 3 and 4 are having problems.
    Also, i downloaded Forefox 4.0.1 and it was not fully compatible with Kaspersky - has this problem also now been resolved?
    In summary - is Forfox 4.0.1 NOT comaptible with Hotmail and Kaspersky?

    Sorry, I can't help with Hotmail, beyond clearing the cache - I haven't used it for 11 or 12 years now. Surprising that a Firefox 3.6 version would have trouble there, as 3.6 has been around for well over a year and Hotmail problems are usually with a recent release of Firefox.
    IMO, if Hotmail support can't help you with Firefox issues on their website and can only recommend using IE, maybe it's time to change web mail service providers. My advice is to signup with a different web mail service, one that takes Firefox seriously. Then set up forwarding in your Hotmail account to have all your Hotmail emails forwarded to that new account. Then slowly transition your email contacts over to the new email address over time. As long as you log in to Hotmail every month or two, your account there should stay active and emails sent there should get forwarded to the new email account. I have done that three times in the last decade, and the first one I transitioned from was still forwarding email thru the two intermediary accounts to my current account until last summer when that service finally changed owners and they wanted all new accounts set up or transitioned to their new software - which I didn't do - and I hadn't even signed into my account there in over 4 years and "forwarding" was still working.

  • I need firefox 2 temporarily to use with a program that does not support version above 2.0 what do i do

    I am trying to access information from a teaching site for securities exam and it will not let me access the programs because it does not support version above 2.0 and i have 3.0 or 3.5 please advise.

    The page title is "Minimum System Requirements for FINRA E-Learning Courses", so I would assume that the page works with newer Firefox versions. All other requirements on that page looks pretty outdated with Flash 8 as minimum.
    * http://www.finra.org/Industry/Education/OnlineLearning/E-learningCourses/P119435
    On which page do you get that error?<br />
    The login page in your More system details list doesn't give an error for me.
    If you really need such an old version the use the portable version of Firefox 2.0.0.20.<br />
    You can find the portable Firefox 2.0.0.20 version under "Mozilla Firefox, P.E. Legacy > Mozilla Firefox":
    Win: http://sourceforge.net/projects/portableapps/files/Mozilla%20Firefox,%20P.E.%20Legacy/
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    # Shockwave Flash 10.0 r32
    # Java Plug-in 1.6.0_13 for Netscape Navigator (DLL Helper)
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    Update the [[Java]] plugin to the latest version.
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

  • Since ipad air does not support adobe flash player what is good to use?, Since ipad air does not support adobe flash player what is good to use?

    Since Ipad does not support Adobe flash player what is the best one to use?

    Adobe has not made a version of Flash for the iPad.
    Kappy explains why. https://discussions.apple.com/message/19446567#19446567
    5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
    Top 4 browsers supports flash player on iPad and iPhone
    http://mashtips.com/flash-player-ios/
     Cheers, Tom

  • I use mini i pad but is not support java ... Thi is whorse ..... Do somthing .... U r apple ... So u have to find a way to work the webpages that need java ...

    Ill try to work with some pages that need java .... And apple not support java ???
    How i work with java ? There is a way to work  and downloding the pages ?

    1. We are not Apple. This is a user to user forum.
    2. Java is not supported because it does not meet Appleñs security criteria for their mobile OS.
    3. You can download brwosers from the App store that support Java, though it may not be 100%.  Search for "Java Browser" in the App store.
    4. For feedback use the feedback link. http://www.apple.com/feedback/

  • Will it hurt 3GS to use a dock that says 'charging not supported'?

    I have a Logic3 universal dock and when I plug in my 3GS it immedaitely says 'charging not supported' yet it does actually charge the phone and syncs to my computer. Will it hurt the iPod to use this dock longterm?

    My son is having similar problems with his new dock (Xmas present) and the new touch 32G.
    When we took them back to the retailer they suggested resetting the Ipod and trying again, it worked, then went back into the not charging mode after loading up the songs and apps again.
    I may be wrong but I think it has something to do with the new Ipod/Iphone models not charging from the Firewire input.
    I think that the docking stations are using that voltage input to the Ipod for the charging circuit.
    This could render many many devices on the market and in the home today unusable on the new devices apple are bringing out.

  • Anyone use US Robotics Modem Router?

    Hello
    I have just purchased a US Robotics ADSL MOdem&Router Model no: 9108.
    My problem is this, i can connect to internet and ichat with no problem however, i sometimes get this "insuficient bandwidth" error message.
    I also cant send or recieve any files anymore, which i could before.
    I have tried to set up my virtual server settings by enabling/opening the ports i have seen mentioned on these forums but none of that helpd.
    I also had an issue with the port 16403-16834 (may be wrong on that coz dont have em in front of me now)...anyway, when i tried to add those ports i got an error saying soming like "invalid port"
    My main issue is sending files and this "insufficient bandwidth" problem.
    Can anyone help me please???
    Thanx

    Hi Afroboogie,
    Some people use sites likes http://flickr.com/ or http://photobucket.com/ to post pics and then link them here. (or a web site)
    My Port Fowarding looks like the one top left here
    It does not have any set for iChat as I use UPnP.
    I have an option to set TCP or UDP or Both for the Protocols.
    iChat logs on and sends Text chats, files and pics on Port 5190. One protocol is used for Logging on and basic Text chats. The other protocol is used for Sending Pics in Chats (Direct Messaging), Sending files and Group chats.
    The change to port 443 will allow you to at least log on and Text chat. It may not allow you to send files as this is the other protocl and can not be changed in iChat and therefore will still be blocked.
    It might also be that the other AV ports are also blocked.
    IPNetMonitorX may be useful in checking this out.
    It has a trial period.
    You need to scan the ports iChat uses for AV chats against a know IP.
    Find a Buddy who can tell you their Public IP address and has iChat open.
    Test ports 5190 on TCP and UDP and test these singularly for UDP 5060, 5678.
    Test this group all in one go on UDP 16384-16403
    Where I was talking about lowest to highest, was about Start and End ports. You listed 16384-16403 as 16403-16384 which was the reverse order and likely to cause the error you had.
    Ralph
    G4 Dual 1Ghz MDD with 3 extra Hard drives Mac OS X (10.4.4) Have you read the iChat FAQs ?? They have moved to Users Tips

  • WPA/WPA2 not an option in encryption type, only WEP

    Can anyone please let me know how to get my Airport Extreme card to connect to my WiFi router using WPA2? So far, when I select my network, the only encryption options I can select when it prompts me to enter a password are all WEP encryption types, and LEAP. How do I get it to offer WPA2 as an option for the encryption?
    Thanks!
    Mike

    I had to rename my network and update software for the airport extreme.

  • WPA, WPA2 not working, only WEP.

    Hi everyone,
    First off i'd like to say that i've done alot of searching and cannot for the life of me figure out why i can't configure my router to have working WPA or WPA2 security, only WEP seems to be a working option. Up until today i've had a WEP key, but feel WPA or WPA2 would be more secure, as I live on campus at a university. I have a D-Link DI-624 router, and am running 10.6.4. I tried both DHCP and manually entering IP addresses, but it all comes down to the fact that i keep getting either "Airport has a self-assigned IP address and may not be able to connect to the internet." or ""Airport does not have an IP address and cannot connect to the internet." Usually when I can get it to connect after trying over and over, the airport will give me either of these messages and results in 169.254. . being the assigned IP address causing the conflict. I will answer any questions necessary to resolving my conflict. Any help is appreciated.

    It appears the firmware update is a temporary fix, as the router will keep working for a while, but every so often it will just connect to my wpa2 security enabled network, but will only give me the "no ip address" message or the other message that indicates i can't connect to the internet. my fix to this is to simply reset the router with the pin-sized button in the back, thus having to re-create the network and add all the details again. anyway i was wondering if any one could offer any more insight on this problem. it is very frustrating to keep resetting the router every two days just to connect to the internet. any help is appreciated.

Maybe you are looking for