Tip strips only for the main VI?

my question is in the subject. So we need to use tip strips only for the main VI, since these tip strips give info to the user (who will only see the main FP), not to the programmer. Is this correct?
Solved!
Go to Solution.

prusty wrote:
I have a boolean control.. is it possible to build a program by which if I press the boolean switch, Another VI will open up in the existing VI..?????
Your question has nothing to do with this post, neither with the certification forum
Why do not search the general LV forum, and if you do not find an answer, post your question in a separate post!
If you use an Event structure, make an event for the button, and put a subVI there. If you set the subVI as a dialog VI, it will pop up.
But there are many many different solution for this, all depending on your actual requirements.
Specify exactly what is your goal, and make a new post in the general LabView forum.

Similar Messages

Can I convert the optical output to analog for a zone 2 audio? I would continue using the HDMI for the main zone. Can I use both of these simultaneously? Zone 2 only supports analog on this receiver.

Can I convert the optical output to analog via a converter for zone 2 audio? I would continue using the HDMI for the main zone. Can I use both of these simultaneously? Zone 2 only supports analog on this receiver.

These will probably help.
[http://www.jsresources.org/examples/audio_conversion.html]

Keeping main menu widget highlighted when you have all pages below this open. Its only staying highlighted for the main page

I have a main menu widget that says 'Services' then below that a group of pages thats relate to this - I want the word 'Services' to stay highlighted when Im on each page but it only is for the main one.

This is the default behavior as the one which is active will only be highlighted. Menu item is linked with page url , so if the page url is used in browser then active state will highlight that menu item.
Thanks,
Sanjit

Header Details to be Printed only for the line item details.

Hi All,
I have the following requirement.
I have Page1 with the Logo, Header Window, Vendor Window, Send Invoice To, Delivere Invoice To and Main Window. Main Window Starts from the middle of the page. In the Page2 i have Logo, Header window and Main Window. In the Page3 i have only Main Window.
In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3.
The requirement is Logo,and Header Window should appear only for the Line items and not for the Terms and conditions.
For the Page1 i have given the Next Page as Page2. Suppose if there is only one line item then it Prints in the first Page itslef and the control flows to the Page2 and since in the page2 i have given the condition for the Logo and header window to print only if line item is more than 1 and since Main Window is starting from the middle there is a blank Space appearing in the start of the page.
The command i have given in the footer to trigger new page that is page3 is not getting triggered. If there are more than one line item then its printing the logo and header window and so there is no blank space appearing and it is working fine.
Please let me know how to avoid this blank space and move my main window to the start of the Page if there is only one line item.
Thank you.

Dear Vasudha,
I am a little bit confused regarding your query,
"In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3. "
When you say footer of main window does it mean , that you are using a table inside your main window and the command node your have inserted is in the footer of the table ?.I hope it is, because my suggestion is based on this assumption.
Well my suggestion for your issue is,
1.I hope you are aware we can trigger a next page in two ways, one by setting the next page static attribute & second using the command node which you have used.In your case you will have to use a combination of both.
2.I feel your First page design is ok. Set its static next page attribute to PAGE2. Similarly set the static next page attribute for PAGE2 as PAGE2 itself. This should take care of your table which you have placed in the main window. If the table contains only one lineitem it will get over in the first page itself. If the lineitems are more in the table, it will automatically triggerPAGE2 (since static next page attribute for PAGE1 is PAGE2) and the remaining line items will be displayed. Now no matter how many lineitems you have ,PAGE2 will be triggered repeatedly(since static next page for PAGE2 is PAGE2 itself) until the entire data in your table is displayed.
In this way your requirement of printing the logo and header windows for the data lineitems only will be fulfilled.
3.Now the last catch in your case is the printing of PAGE3(The terms and condition page) on an entirely new blank page.
In the footer section of the table which you have used, use a command node set to PAGE3. After the command node and under the same footer section now insert your terms and condition lineitem.
Also Check the "at End of table" checkbox and uncheck " AT PAGE BREAK" under OUTPUT OPTIONS tab for the footer section.
So now this footer section will be triggered only once after all the data in the table is displayed
4. So now if there is only one lineitem, before the default second page is triggered the command node will trigger the PAGE3 and the terms and condition will be displayed.Else if there are more lineitems the page2 will be triggered again and again and finally when all the lineitems are over, the footer of the table will get triggered. So the command node will take you to the PAGE3 wherin the terms and condition will only be displayed.
Hope this helps.
Regards,
Riju

Transaction type to dispose the asset only for the depn areas 01 and 02

One of the Company codes XXXX plant XXXX has an isuue for asset # XXXXXXXXXX-0 this asset was partially retired in Nov.2008 and now its acquisition value is JPY312,428
which should not be an asset under US GAAP but qualify for asset under Tax book . So it needs be removed from US and JCC book(01 and 02 area) but keep the record on the Tax book(area 15).
Is there any transaction type to dispose this asset only for the 01 and 02 area but keep the historical data for 15 area?
Thanks for helping in advance

Can I suggest you a way to handle this? Just give a try and see whether it works for you or not.
Post a Credit entry to the Asset only to the area 01 and 02. Please follow the below steps before you do this.
1. Go to main SAP screen => System => User profile => Own data => Parameters
Add parameter ID FAA_FB01_AREA_SWITCH (Turn On Value Entry at Area Level for FB01) and mark "x" against it in Parameter value. Save this changes.
2. Go to F-02, Enter the Asset number (posting key 75 and transaction type 105, which ever you feel like) and then in the next screen, enter the amount. Here in this screen, you will find a tab named area values. Click that tab and change the values Area 01 & 02 to $0.01 and leave the Area 15 as it is. Enter the appropriate dr line item and save the document.
3.Go to AW01N and see tha values against each of the areas.
please revert in case you have any questions.

New links will not open in a tab, only in the main window

with firefox 21, links will not open a new tab, only in the main window. I have set the option for tab opening, but it still will not work

Did you installed ASK toolbar?
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
*''Once you get the pop-up, just select "'Start in Safe Mode"''
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Field to make uneditable only for the current/selected row

I have a web dynpro application and I wanted to make some fields uneditable and for this I have done the following:
I bound a context attribute to the readOnly property of all the fields you want to control. Then in the onEnter event of the main field, I set the value of this bound context attribute to ABAP_TRUE to change the state of the corresponding UI elements.
I have written the following in the onenter event of the main field:
DATA lo_el_context TYPE REF TO if_wd_context_element.
   DATA ls_context TYPE wd_this->element_context.
   DATA lv_editable TYPE wd_this->element_context-editable.
* get element via lead selection
   lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
   IF lo_el_context IS INITIAL.
   ENDIF.
* @TODO fill attribute
* lv_editable = 1.
* set single attribute
   lo_el_context->set_attribute(
     name = `EDITABLE`
     value = 'ABAP_TRUE' ).
Now the issue is that when I hit enter on the main field all other fields gray out/uneditable for all the rows, what I want is the other fields should be greyed out only for the row where I am entering the main field and hit enter.
Can you please tell me how can I do that?
Thanks,
Rajat

Hi Raj,
You are not getting it. When you have only one context attribute and bind that to all the rows/columns of the table then everything will be enabled or disabled.
In your case, create a local node with cardinality 1:1 inside the node you already have.
Write a supply a function for this node.
Add a attribute read_only of type wdy_boolean.
bind this attribute to the read_only property of the table columns.
in the supply function based on the element conditions you might have enable this attribute of disable.
supply function method already has the necessary code , you only need to enable the commented lines and put your if ..end if code around it.
See a example.
* General Notes
* =============
* A common scenario for a supply method is to aquire key
* informations from the parameter <parent_element> and then
* to invoke a data provider.
* A free navigation thru the context, especially to nodes on
* the same or deeper hierachical level is strongly discouraged,
* because such a strategy may easily lead to unresolvable
* situations!!
* if necessary, get static attributes of parent element
DATA ls_parent_attributes TYPE wd_this->element_sflight.
parent_element->get_static_attributes(
    IMPORTING
      static_attributes = ls_parent_attributes ).
** data declaration
DATA ls_prop TYPE wd_this->element_prop.
** @TODO compute values
** e.g. call a data providing FuBa
IF ls_parent_attributes-carrid <> 'LH' .
    ls_prop-read_only = abap_true.
ELSE.
    ls_prop-read_only = abap_false.
ENDIF.
** bind a single element
node->bind_structure(
    new_item             = ls_prop
    set_initial_elements = abap_true ).

Why smoothing factors maintainind only for three main criteria in Ven.Eval?

Experts,
Why Smoothing factors are maintained only for three main criteria like Timeliness service, Quantity Reliability and Shipping Instructions?what about other criteria like on-time delivery and GR Inspection.
In this case, how new score of on-time delivery is replaced with existing score? Pls Anyone could explain the reason behind this.
Thanks in advance.
Edited by: SAPr3.HELP on Dec 1, 2009 8:15 AM

Hi,
Have a look here
http://wiki.sdn.sap.com/wiki/display/ERPSCM/VendorEvaluationin+MM-PUR
Hope to help you,
Marta

I use firefox - Is there any way to make it so my internet browser only remembers the MAIN site? -- EG: Only Youtube.co.uk instead of Youtube.co.uk/VIDEO ect

I use firefox - Is there any way to make it so my internet browser only remembers the MAIN site? -- EG: Only Youtube.co.uk instead of Youtube.co.uk/VIDEO ect.ect. WHISPER PLEASE

Is this to reduce the clutter of suggestions on the address bar, or for some other reason?
You can change the address bar drop-down so it only suggest bookmarked sites instead of everything in your history. This article describes how to make that change: [[Awesome Bar - Find your bookmarks, history and tabs when you type in the address bar]] (see the section "How can I control what results the location bar shows me?").
Am I on the right track?
(I'm avoiding the really hard question of how to selectively cull your history. I can't think of a way to do that.)

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/

I cracked my screen. I want to use other monitor which I had one. I bought Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

I cracked my screen. I want to use other monitor which I had one. I bought an Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

You have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the monitor. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the monitor and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the monitor your Menu Bar will automatically change back to the MacBook.

Is there a way to create a fade only for the first loop?

I have a loop (Modern Guitar Rock 04), which I've extended out so it repeats four times. I select the Fade Tool and X-Fade for drag. I then drag just in front of the loop and onto it, which creates a fade. However, this also creates fades at the beginning of the repeating loops. Is there a way to create a fade only for the first loop?

The loop function always repeats the same region so of course the fade is also copied. So option+drag the original region to make a (non clone) copy, fade the first region and loop the second one (which you just copied).

Hi, I'm making hyperlinks. They work for the main page of the webpage, but when I'm trying to redirect the hyperlink to a "sub page" of the webpage it is still going to the main page. (allthough I'm pasting the complete url address)

Hi, I'm making hyperlinks. They work for the main page of the webpage, but when I'm trying to redirect the hyperlink to a "sub page" of the webpage it is still going to the main page. (allthough I'm pasting the complete url address)

Hi! first of all, thank you so much for your help.
I don't know about that panel you are talking about.
what I do is RIGHT CLICK, INTERACTIVE, NEW HYPERLINK, and a window pops up, where I paste the address (images).
Where says URL I paste the complete address that the "sub page" gives me.
Is that correct? (for the main page of the wabepage works correctly)
thanks!!!

Function in select statement need to be called only for the last record.

Select state,
local,
fun_state_loc_other_details(19) details
from state_local
where pm_key=19
resuts:_
State Local Details
AP APlocal details1
UP UPLocal details1
MP MPLocal details1
i) The above query returns 100 records
ii) fun_state_loc_other_details is also getting called 100 times. But I want this function to be called only for the last record that is 100th record.
is there any way to do that?

Thanks amatu.
One more small query. Can I do it on condition based.
Select state,
local,
fun_state_loc_other_details(19) details
from state_local
where pm_key=19
Like if one state it need to be called once.
AP -- 50 records
UP - 20 records
MP -- 10 records.
fyi: this record no. varies
I want the function to be called for AP once, UP once, MP once.

Master Page: Alternatives (Subform Set) works only for the first page

Hi everybody!
I have bumped into a very weird problem with ADOBE Forms:
When I create an 'Alternative' in a Context area and then place it on a Master Page, it works only for the first page. On the rest of pages it always show the 'TRUE' subform, regardless of the condition (which is not changed, of course). Absolutely the same Alternative works perfectly in a Content area for all pages.
Has anybody seen something like this? Any ideas why?
Thank you!

This happens because of the processing of the form.
You can see this here:
LiveCycle ES2 * Adobe LiveCycle Designer ES2
You have to put a own variable, which is set with the value you want in the very beginning.
I know, it is not that logical in the first moment, but it makes sense.
Regards
Florian
PS: This space SAP Interactive Forms by Adobe is the correct for questions like that

Tip strips only for the main VI?

Similar Messages

Maybe you are looking for