TIP, TOP, Time Types, Time Balance and Time pair

Hi Friends,
This is Neehar.
I am new to SAP HCM.
Please can someone help me in explaining me about TIP, TOP, Time Types, Time Balance, Time Pair and Internal Tables.
Please let me know, how Internal Table works and which values are stored in Internal tables.
Please explain me with a Scenario.
Thanks
Neehar

Hi Neehar,
Please go through the below documents which will answer your questions.
Time Types - The DNA of Time PCRs
Function TIMTP
Internal Tables in Time Evaluation - Personnel Time Management (PT) - SAP Library
I hope this resolves your issue.
Regards,
Vivek

Similar Messages

  • I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM

    I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.

    wesb
    What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
    Let us go through the typical drill so as to take nothing for granted.
    1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
    school or company network?
    2. Are you running the program as Administrator and is there any "domain" account involved?
    3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
    4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
    Let us start by ruling in or out any of the above, and then we can decide what next.
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • HT5312 Every time I click send e-mail for instructions on resetting my security questions, I don't get them? I just want to play minecraft. I already put $15 in my balance and I can't even spend it. Thank you for taking the time to read this.

    Why is it, every time I click send e-mail for instructions on resetting my security questions, I don't get them? I just want to play minecraft. I already put $15 in my balance and I can't even spend it. Thank you for taking the time to read this.

    Either they're being sent to a different email address, or got caught in a spam filter, or something's wrong at Apple's end. If you can't find the email, you need to ask Apple to reset your security questions, which can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
    (105723)

  • Time Balance and Time series in ASO

    We are building an ASO application and we need Time balance and dynamic time series functionality.
    If I go and use the TB functionality in ASO, my Time dimension has to be stored and I cannot put mdx formulas on my members (YTD,QTD,MTD)
    I see various threads here and the recommendation is to have a new dimension to view the time series members (gary's blog...tnx for him)
    However we cannot afford to have a separate dimension. The time series should be under Time.
    How can we go with this?
    Please help me with your suggestions/ideas. Thanks for your time.
    TIA
    - Sai

    Any ideas guys?
    John, can you please shed some light on this.
    TIA

  • I have an iMac os x 10.4.11 but I am having problems with Flash Chat. About 3 weeks ago, I can no longer type in messages and send them in any Flash Chat situations. I have uninstalled and re-installed Flash Player 6 times but still have the problem.

    I have an iMac os x 10.4.11 but I am having problems with Flash Chat. About 3 weeks ago, I can no longer type in messages and send them in any Flash Chat situations. I have uninstalled and re-installed Flash Player 6 times but still have the problem.

    I have an iMac os x 10.4.11 but I am having problems with Flash Chat. About 3 weeks ago, I can no longer type in messages and send them in any Flash Chat situations. I have uninstalled and re-installed Flash Player 6 times but still have the problem.

  • I using mozilla firefox so long times but it just get problem today because i can't type in english words but i can type in thai and some buttons is not english but it's other alphbets that i can't read and it's happening with yahoo and friendster and not

    I using mozilla firefox so long times but it just get problem today because i can't type in english words but i can type in thai and some buttons is not english but it's other alphbets that i can't read and it's happening with yahoo and friendster and not sure for other website
    == today ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Same problem with the mouse, but with the mouse I can leave the cursor in place in the text field and move to the keyboard to type. As long as the cursor is in the field it stays editable.
    The problem with the pen is it's in my hand all of the time. I just flip it up under my thumb against my palm to type. So, as soon as I move the pen, the field goes away and I can't type in it. Hoping this is making sense.
    My tablet does have the touch function too, and I just found out I can use my finger to tap in the text field, then type. I guess that'll be my solution since I prefer not to leave a mouse set up on this iMac.
    I'm thinking now that this is just a problem with the pen itself, and nothing to do with iPhoto. So glad to have this figured out! I really like iPhoto '11! So much easier for me, a simple P&S gal, than Aperture 3. I use iPhoto Library Manager too and love it!
    Thanks so much! Debbie

  • I have 5 layers of texts with a white background on the bottom(V1). I want to cross dissolve to black at the same time on all layers. However they all don't disappear at the same time. It seems the top layer fades out last, and so on.

    I have 5 layers of texts with a white background on the bottom(V1). I want to cross dissolve to black at the same time on all layers. However they all don't disappear at the same time. It seems the top layer fades out last, and so on. These are 20 frame dissolves.

    FCP User Manual, page 798.
    You can condense multiple clips that are stacked above each other into a nest. The nest appears as a single clip in the Timeline. If you need to modify the individual clips inside after you have created the nest, it can be expanded again by double clicking it.

  • My keyboard will work for about 5-12 typed letters and then will have to re start to beep each time I try to type a letter and I have to click on the field again to  start typing!!

    My keyboard will work for about 5-12 typed letters and then will beep each time I try to type a letter, and no type appears, and I have to click on the field again to  start typing!! Just getting this question typed was a huge chore!! We even bought a new keyboard and it did not fix the issue.

    It depends on what keyboard you have, if not than their May be a problem with your device

  • Read start time of time pair and compare it in a PCR

    Hi All
    Created following PCR to check if th start time of the time pair is 09:30 or not. If it 0930 than I need to check the end time as well.
    000010            D HRS=PBEG  HRS?0900
    000020 *
    000030 =          D HRS=PEND  HRS?1730
    000040 = *
    000050 = =       HRS=DZ007 HRS-00.50 ADDDBZ007Z
    But the schema is processing only till line 20. As the start time of the time pair is 0930 it should go and check the end time.
    I would like to know if correct operations are used to capture the start time of time pair and compare?
    Any help will be much appreciated.
    Thanks

    Hello;
    Your pcr is wrong.
    000010 D HRS=PBEG HRS?0900
    000020 *
    000030 = D HRS=PEND HRS?1730
    000040 = *
    000050 = = HRS=DZ007 HRS-00.50 ADDDBZ007Z
    This is your rule. It checks whether it is 09:00 or not. If it is 09:00 it checks end time.
    000010 D HRS=PBEG HRS?09.50
    000020 *
    000030 = D HRS=PEND HRS?17.50
    000040 = *
    000050 = = HRS=DZ007 HRS-00.50 ADDDBZ007Z
    Beside you can not check it as 17.30 it should be out of 100.
    I mean 17:30 is 17.50 and 17:15 is 17.25
    Regards;
    Okan

  • Where place set time pair P10 and P20 is one pair at IMG?

    hi
    now I have a question,
    DWS daily work time from 08:00-17:00 
    if one employee time events (IT2011)like this:
    07:51 P10 clock in
    07:52 P10 clock in (repeatedly)
    17:00 P20 clock out
    when the time evaluation ,the system (rule TE30) will give a error message,"missing clock out",
    because the system think P10 and P20 is one pair ,so at this case ,the system think  it missing one clock out.
    so I want to know where place set time pair P10 and P20 is one pair at IMG?
    thanks
    Olivia Yang

    Hi,
    So as per your requirement we need to have a seperate code for intime and outtime else u cannot differentiate it.
    And in time evaluation each clock in should have a clock out.Else the error by TE30.
    Can you please be clear in this question?
    so I want to know where place set time pair P10 and P20 is one pair at IMG?
    Thanks
    Swati

  • Generate Separate New Time Pair (not split)

    Hi All-
    US SAP_HCm 4.7
    I am trying to generate a separate time pair (in schema TM04) for overtime (M), while keeping the planned working time (S) time pair untouched. I am basically trying to make a copy of a time pair (i.e. hours) except for changing the processing type (S to M).
    Example:
    TIP Table - IN
    0800-1400 --- 8 hours -
    (S) Planned Working Time Pair
    Operation in Time
    Some Clever idea ... or concept
    TIP Table- OUT
    0800-1400 --- 8 hours -
    (S) Planned Working Time Pair
    0800-1400 --- 8 hours -
    (M) Overtime Time Pair
    I have tried using the operation GENTG in a PCR .. but it seems very limited. Is there any SAP Time gurus out there with a clever idea?
    Any help is much appreciated.
    Thanks
    B-

    I can generate time types but the problem is that time type will be a generic time type and will be applicable to all absence classes with operation VARST or OUTTP.  Until I have a time pair on a non working day and if that time pair is generated then it can be read using RTIPA OR PTIPA variables. 
    Otherise for every absence type it will generate 8 hours but I want 8 hours to be generated wtih PL and CL only.  If i give LOP or LWP then also system is generating 8 hours time type which is wrong.  So until I generate a time type for the off day i cannot read 2001 or TIME PAIR TABLE. 
    Kindly guide.

  • Time pair on Planned working hours 0

    I want to generate time pair for days where planned working hours is 0.  how can i do that do i have to write a rule to generate time pairs on day with hours 8 (fixed if it is a off day) because if anybody takes PL on off day and CL on off day then i have to generate 8 hours of attendance during time evaluation.  By default system is not generating any time pairs and hence i am not able to generate 8 hours.  Plz guide.

    I can generate time types but the problem is that time type will be a generic time type and will be applicable to all absence classes with operation VARST or OUTTP.  Until I have a time pair on a non working day and if that time pair is generated then it can be read using RTIPA OR PTIPA variables. 
    Otherise for every absence type it will generate 8 hours but I want 8 hours to be generated wtih PL and CL only.  If i give LOP or LWP then also system is generating 8 hours time type which is wrong.  So until I generate a time type for the off day i cannot read 2001 or TIME PAIR TABLE. 
    Kindly guide.

  • Time pair generation

    Hi Gurus,
    I want to know, how the time pairs are generated. I have an idea that it considers vaules from PA2011 which are uploaded through PT80 and are written to TEVEN. I know operation FILLP is used to form pairs.I want to know which PCR does it ?
    Really appreciate your help in this...
    Regards,
    Kumarpal Jain

    TE30:
    F1 help: The personnel calculation rule checks the status STAT1 for each time pair. This status has been set in pair formation and indicates whether it was possible to form an error-free time pair, or if the start or end time could not be delinited. If there are incomplete (open) pairs, TE30 issues an appropriate message. If the clock-out entry could not be delimited, it is completed automatically using times from the daily work schedule by means of operation

  • Non Financial Accounts,and Balance,Balance Recurring,Types of data and type

    Hi Can Any one make me clear for the following?
    1.In HFM Account Types we can find Balance and Balance Recurring what it means? is it completely relating to Finance and Accounts Topics? if so give me few good examples to
    understand as regards to HFM where this need will come?
    2. What are Non Financial Accounts we use in HFM? do we use to load?i if so what is the format like Excel or Data form?
    3. What is Head count? what its purpose in relation to HFM? in what situations we have to think and recall about this, mean to say by doing which HFM Activity we can Understand
    about this Simply?

    1) Balance and Balance Recurring types contain data that does not accumulate from one period to another, and do not translate. Headcount is typically a balance, as is Square Footage, for reporting real estate information, for example.
    2) Non financial accounts are typically those which are not currency-related, such as headcount, units sold, number of customers, days sales outstanding, number fo new customers, etc. The entry of this data can be any way other data is loaded - either directly via load file into HFM, through forms, grids, journals, smart view, or FDM, among others I'm sure.
    3) Headcount is often a metric for growth. It is often used in ratios, such as revenue or margin by headcount. Even if you acquire a company, there remains a ratio between revenue and headcount, so it's a good metric for organic and acquired growth.
    --Chris                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Since I updated to ios 7.1.1, I cannot check my balance and top up credit to my account anymore.. :( when try to dial

    Since I updated to ios 7.1.1, I cannot check my balance and top up credit to my account anymore.. when i tried to check the balance (*121# my carriere balance number)dial its turning into calling mode instead of requesting ... the same repeating while i tried to topup my account using paper voucher... so please help me to sort out my problem... thanqq in advance ..
    Phone details: iphone 5
    Network: IND airtel
    ios: 7.1.1...

    I have this problem to simce upgrading to 7.1.2,
    any solutions?

Maybe you are looking for