Tips and help on browsing web

I typed http://www.facebook in the browser. I assumed that it will append ".com". But it is not sending. Is it possible for the browser to fill ".com" automatically?
Are there any tips on browsing?I found following other problems.
1. When I switch to landscape mode, browser is filling right side with  the menus. How do I fille with more content?
2. How do I zoom content?  Double tapping is making it to 200%. Is it possible to zoom different levels without using Options menu?
3. How do I just see image properly. I want image to fill whole display
4. When I click on browser, how do I make it to take to home page? Clicking on browser is taking me to list of book marks. It would be better at least if can show home page on top of list.
5. Some times clicking on arrow to display right side buttons  is actually taking to link  if there is link below arrows. Don't know how to avoid it.
Appreciate any pointers to help browser experience.
Thanks,
Chinni

also, about the rev, i got a heat sink on mine, why would they make a rev-a with a heat sink? shouldnt they be making only rev-d if d is the newest? the box is the nicest box i've ever seen a computer part come in but it says rev-a on the box. is there a way to find the rev on the card? i dont want to bother taking it out or i'll have to take out a lot of water cooling things in there just to check. would like an answer before i check. if it is a rev-a with a heat sink on it... why, i know it's the process they're made in, but then that means it's a newely made card but used a rev-a style? they should give us the option to pick which rev we want to buy if we're buying from them straight from their site. I just wanna get this straight. i have no problems with the card so far, but just want to know.

Similar Messages

  • I am trying to search the web when I click on Firefox Icon this message shows up Offline Mode Fire Fox is currently in offline mode and can not browse web how do I fix this?

    I am trying to search the web when I click on Firefox Icon this message shows up Offline Mode Fire Fox is currently in offline mode and can not browse web how do I fix this?

    Firefox does not have a built-in "Run" option on downloads for security reasons. If you "Run" an item, your anti-virus/anti-spyware may not have an opportunity to fully examine the contents until it is already installed on your hard drive. Result: damage, if infected, is already installed on your system.
    With that in mind, you can install the following add-on, but you accept the risk mentioned above ('''NOTE:''' the developer has not updated this product -- OR any of his other 7 extensions -- to be compatible beyond Firefox 3.6.x; therefore, when you upgrade to a more current version of Firefox, you may lose the functionality of the add-on if the developer does not update it.):
    *https://addons.mozilla.org/en-US/firefox/addon/opendownload/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]

  • Tips and help with re-installing Lion over Snow Leopard

    I had MAJOR issues with my initial Lion install on my Mid-2009 MBP- so much so, that I had to wipe my hard drive and re-install Snow Leopard and all my applications. My major issues were as follows:
    1. All my files were locked out- I could open them in most cases, but I couldn't overwrite them- Lion had aded some funky permissions scheme that I didn't recognize, and my user name wasn't present on any of them. In some cases, I couldn't even open files, even though they were resident on my hard drive (and in my own user folder) before the upgrade to Lion.
    2. Apple's own Universal Binary apps wouldn't work after the upgrade. Final Cut Pro 6, in particular, came up with a message that it was a "PowerPC" app and wouldn't run- yet Shake 4.1 would run just fine!
    3. Adobe Creative Suite 3- after the upgrade, my Abode Ceative Suite 3 apps worked just fine, for about a day- that is, until I tried to correct the file permissions issue by changing permission on a few of my folders in my User folder (and electing to change permissions in the files contained therein)- at which point my Adobe apps told me that they were damaged and needed to be reinstalled. Yet after uninstaling and reinstalling the entire Creative Suite 3 times, I still would get the same message.
    My entire workflow is Adobe CS and FCS2- why chould I have to pay the upgrade costs just to use Lion? FCPX is completely brkoen for my workflow and eqipment, and Adobe can't even guarantee that CS5 works with Lion- so why does Apple insist on Lion when it's hardly even compatible with its own products?
    I really want to use Lion, but I am looking for some tips on instalation to kep these problems from happening again. I didn' have ANY of these problems with upgrading OS 10.2 through 10.6. Any help with prepping my system/files for upgrading would be helpful. Thanks!

    any new Apple kB articles
    http://support.apple.com/kb/index?page=articles
    Me, I think clone backups are more useful, and only use T.M. as secondary.
    Using Cloning as a Backup Strategy
    I'd assume that professional apps may need to be tested still; and of course check to see what you have that depends on PowerPC code and Rosetta first. That has some in a tither.
    A clone lets you still be able to boot Snow Leopard. Check out Carbon Copy, SuperDuper.

  • 5002 error. I cant change payment details. I can't purchase anything. always says 5002 or temp error. Help! Itunes is as good as useless. I've deleted caches reinstalled itunes and followed all the web tips. Nothing works!!!

    I cant change payment details. I can't purchase anything. always says 5002 or temp error. Help! Itunes is as good as useless. I've deleted caches reinstalled itunes and followed all the web tips. Nothing works!!! Pls help.

    Bump......
    Nobody has any ideas?? Apple people??

  • I will type in google let say tree the search will click on to one of the searches and instead of tree web page showing up a ad page will come up this happens with very thing can you help.

    I will type in google let say tree the search will click on to one of the searches and instead of tree web page showing up a ad page will come up this happens with very thing can you help.

    You (or your kids) inadvertently installed adware. You do not need to download or install anything to fix it.
    Any tips on how to stop it from happening?
    Yes. To learn how to avoid it in the future read How to install adware.
    If you require them, Apple's removal instructions are linked in the Recovery Procedure near the end of that document. Read and follow them carefully. Pay particular attention to the easily overlooked passages directing you to restart your Mac when required.

  • How to hide "View in Browser" and "Edit in Browser" from ECB injected by Office Web Apps Feature

    Hi,
    i am currently using custom_AddDocLibMenuItems to implement a custom ECB menu for my document library. I need to activate Office Web Apps. My custom_AddDocLibMenuItems has two items
    -> custom dialog
    -> open in office web apps
    After activating the Office Web Apps Feature at the SiteCollection Level, this Feature "injects" in my custom menu the following
    additional menu items:
    -> View in Browser
    -> Edit in Browser
    Its curious to see that, cause implementing the js function custom_AddDocLibMenuItems with
    return true should be the way to impolement a custom ECB menu without having other features/solutions injecting things in this menu!? Or did i misunderstood something here?
    My question is: How can i prevent this ...
    a) without deactivating the Office Web Apps Feature
    b) without modifying the core.js
    I hope someone can help!
    Best Regards
    Bog
    Developers Field Notes | www.bog1.de

    May be this can help
    http://extreme-sharepoint.com/2011/10/29/hide-menu-ecb/http://pholpar.wordpress.com/2011/07/24/hiding-ecb-custom-actions-based-on-specific-list-properties-using-the-client-object-model/Or tryhttp://stackoverflow.com/questions/13795858/how-to-hide-view-in-browser-in-document-library-in-sharepoint-2010-using-javascr $(document).ready(function(){
    $('.ms-MenuUIPopupBody').live('blur', function() {
    var elm = $("div.ms-MenuUIULItem a:contains('View in Browser')");
    elm.remove();
    $("div.ms-MenuUIULItem a:contains('Edit in Browser')").remove();
    It is hiding menu only on focus or blur or mouseover
    I wants it to be hide on load AS soon as i Click on "V" option on right side of document it should hide View in Browser and Edit in browser
    When I click on V option ![I wants As soon as i Click on v option right side of test it should hide view in Browser and edit in browser][1]
    If this helped you resolve your issue, please mark it Answered

  • Users able to build reports and dashboards via the Web browser

    Hi All,
    My requiremts is "Users able to build reports and dashboards via the Web browser and perform ad-hoc queries and analysis online via the internet" .
    Requesting to kindly let us me know  the procedure to get resolve the above requirement.
    Thanks,
    KVR

    Hi,
    Go through the links below
    Designing Microsoft Excel 2007 Chart
    http://charts.jorgecamoes.com/how-to-create-an-excel-dashboard/
    http://dashboardspy.com/dashboards/23/designing-microsoft-excel-2007-charts
    SAP BUSINESSOBJECTS DASHBOARD BUILDER
    http://www.sap.com/solutions/sapbusinessobjects/large/business-intelligence/dashboard-visualization/dashboard-builder/index.epx
    http://www.sap.com/solutions/sapbusinessobjects/sme/reporting-dashboarding/index.epx
    It may help you
    Regards,
    Marasa.

  • I just updated to 4.0.1 on my mac and now it says "Firefox is currently in offline mode and can't browse the web". It is not my internet since I am using Safari just fine. Any suggestions? I sure wish I wouldn't have updated!

    I just updated to 4.0.1 on my mac and now it says "Firefox is currently in offline mode and can't browse the web". It is not my internet since I am using Safari just fine. Any suggestions? I sure wish I wouldn't have updated!

    Make sure that Work Offline is unchecked: File > [] Work Offline

  • My iPad air keeps crashing and freezing when browsing the internet . Please help :(

    My husband and I updated to the new OS. Now our iPad Air's keep crashing and freezing whilst browsing the internet.  We have done a reset and swiped away pages but nothing is helping. Its very frustrating Can anyone help? Thank you Jo

    Please tell me that it has NEVER been jailbroke.  If it has not been jailbroke, here are some standard repair procedures:
    First, confirm that this is what you did for a "reset."  Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, since you have IOS-7, read this.

  • I've a Pc with Win7. Is it possible to view the movies I've there (and listening to the music also there) in my TV using Apple TV? And navigate in the web? Can I choose my browser?

    I've a Pc with Win7. Is it possible to view the movies I've there (and listening to the music also there) in my TV using Apple TV? And navigate in the web? Can I choose my browser?
    I'm just starting in this area so please explain in detail.
    Thanks.

    Welcome to the Apple Community.
    You can't browse the web on an Apple TV
    You can view any content that is in your iTunes library on the PC via the Apple TV if it is in the correct format.

  • TS1398 Help! MacBook won't connect to the Internet on my network. Never had an issue on other networks, other devices work fine, i.e. iPhone/iPad. Says it's connected. Plugged in Ethernet and tried other browser. Called ISP and all good on their end. 

    Help! MacBook won't connect to the Internet on my network. Never had an issue on other networks, other devices work fine, i.e. iPhone/iPad. Says it's connected. Plugged in Ethernet and tried other browser. Called ISP and all good on their end. 

    You can't change it - just try aagain. 
    https://discussions.apple.com/index.jspa
    Where you find these options:
    Notebooks
    MacBook Pro
    MacBook Air
    iBook
    MacBook
    PowerBook

  • Trying to log into firefox but keep getting firefox is in offline mode and can't browse the web, I've unchecked the work offline in the file menu but still get error message...

    trying to log into firefox but keep getting firefox is in offline mode and can't browse the web, I've unchecked the work offline in the file menu but still get error message...

    The work offline option can be found from Firefox button -> Web developer or from the menubar toolbar -> Work offline (Or at least thats what happens in Windows).
    Have you any other reason for being offline; router off, firefox not dialing up or whatever. Or is security software or a firewall blocking firefox, or a network connection, or firefox setting etc set wrongly.
    See also
    *[[cannot connect after upgrading firefox]]
    *[[options window - advanced panel]]
    * [[error loading web sites]]

  • Help creating browse sequences that work and deleting sync TOC

    Hi,
    I'm using the latest version of the TCS with RH 9.0. I'm trying to create WebHelp Pro output
    for a book produced originally in Framemaker. I've been following Rick's Skinny on skins
    guide to tailor the look and feel, but am having real problems getting my browse sequence
    to work. I've used Tools> Browse Sequence Editor and then Auto-create using Frame TOC,
    selected the TOC from the drop-down list and chosen 4  as the depth that I want to browse.
    The TOC that appears in Browse sequences  is strange and doesn't represent the Frame TOC that
    appears in the html, I left this 'as is'. Once I've generated the ouput the sequence browsing works
    for the equivalent of top-level heading only. What am I doing wrong and what should I
    be editing to make this fully functional?
    I would also like to delete the Sync TOC from the toolbar, and it seems to be possible to
    delete the image but not the entire field. I know it can be done, because Peter Grainge's
    RH site doesn't have it. Between Peter and Rick I will somehow achieve this website for
    my company...
    Many thanks in advance for any ideas and help.
    Best wishes,
    Karen

    Hi all
    @Jeff - In WebHelp output a Browse Sequence is presented using the arrows that sit in the Navigation Mini-Toolbar. I've documented some of it at the link below:
    Click here to view
    @Karen - Are you wanting one single sequence that works to allow the user to traverse the TOC from top to bottom or bottom to top? If so, the way you do this is by creating one very long sequence in the Browse Sequence Editor. You might begin by specifying 0 as the level to use when auto creating. Normally that will be sufficient. However, it depends on your TOC as to how well that may actually work.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Please help. Performance tips and tricks on Camera RAW 6.6 needed.

    Hello I really need your help and I want to thank you in advance for your time!! I need performance tips and tricks for Camera raw 6.6 and Bridge CS5? I have Intel i7 920, with 16GB of RAM which I thought is powerful enough to make developing in Camera RAW smooth as butter but I am not getting that performance. When I slide the settings, it has a delay for the preview and it gets worse if I apply a vignette. I usually open the camera raw file to photoshop and sometimes it does take a considerable amount of time to load. Working on photoshop is great, quick as expected, but Camera RAW makes me cringe.
    What tips and tricks would you suggest for performance boost? The best case scenario is to have the preview reflects the changes of the slider without delay. Is this possible?
    Thank you very much.

    Thank you for your help.
    I found an adobe link on how to optimize lightroom and followed some tips there that are applicable to bridge. The notable setting I tweaked was to change my cache directory to my RAID 0 drive, and increased cached size to the maximum setting. The difference is night and day, and I am extremely  happy now. The only thing that still bugs me a little is that there is still a slight delay cropping when the vignette is not set to 0 . I can understand that's a little extreme though and I usually add the vignette at the end anyways.
    Yammer P:
    After making the tweaks, I was able to slide the settings with instant previews even with Noise Reduction (luminance) set to zero.
    Robert Shomier:
    Thank you for the link, I have seen that before and followed the directions. I upgraded to 16GB of RAM two weeks ago after reading the tips.
    Thank you guys again..

  • So now i might ned u all help, currently im using ipad and i get some news abt ios 6.1 and im interested abt it so i updated wif my Ipad (ver. ios 5) and i checked some web said ipad1 cnt update to ios6 so i might ned u all help how to restore bck to ios5

    so now i might ned u all help, currently im using ipad and i get some news abt ios 6.1 and im interested abt it so i updated wif my Ipad (ver. ios 5) and i checked some web said ipad1 cnt update to ios6 so i might ned help how to restore bck to ios5 as normal be4

    If it's showing the connect to iTunes screen then you will need to do that.
    But Apple don't provide any method to update the first gen iPad to iOS 5 (nor do they support downgrading the iOS version).

Maybe you are looking for