Tips For Installation of Migration Client on Windows 2008.

Hi All,
I am completely new to installation of Migration Utiliity.
If anybody have performed Installation of Migration Client on Windows 2008 machine For IPM 10g To IPM 11g data migration,
Please help me by suggesting tips...
Thanks in advance
Vikas
Edited by: 862821 on Feb 18, 2013 10:55 PM

Hi all,
I have installed migration client on IPM 10g machine.
From IPM 10g I want to export perticular application.
For which I have to configure that application in IPM migration tool for export.
I need steps to configure application in Migration client(10.1.3.6).
Please somebody help me ..
Thanks in advance
Vikas

Similar Messages

  • Best practice for installation oracle 11g rac on windows 2008 server x64

    hello!
    can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
    best regards,
    christian

    Hi Christian,
    Check this on MOS
    *RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
    https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
    DOC Modified: 14-DEC-2010
    Regards,
    Levi Pereira

  • Is Weblogic 11g supports for Kerberos AES/RC4 Encryption on Windows 2008 R2

    Is Weblogic 11g supports for Kerberos AES/RC4 Encryption on Windows 2008 R2?
    Thanks,

    DES is disabled by default on 2008, could this DC be a Windows 2003?  If so then this would be the expected encyption.
    The following is the list of the encryption available for each Windows system
    Windows 2000,  XP,Windows Server 2003:     
    DES, RC4          
             Vista
    , Windows Server 2008:      DES, RC4,AES          
             Windows 7 and  Windows Server  2008 R2:     DES(disabled by default), RC4,AES
    From:
    http://blogs.msdn.com/b/openspecification/archive/2010/11/17/encryption-type-selection-in-kerberos-exchanges.aspx
    Paul Bergson
    MVP - Directory Services
    MCITP: Enterprise Administrator
    MCTS, MCT, MCSE, MCSA, Security, BS CSci
    2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
    Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
    Please no e-mails, any questions should be posted in the NewsGroup.
    This posting is provided AS IS with no warranties, and confers no rights.

  • Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on X61/X61s

    Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD.
    This information can help address blue screen errors specifically
    related to Turbo Memory, but may not solve errors related to other
    issues. Please read through the instructions completely, make sure they
    apply to your system, and after attempting the solutions please post
    back with your feedback for the community.
    Some users may experience random blue screen errors with ThinkPad
    systems running Windows Vista with Intel Turbo Memory hardware. These
    blue screens may occur during normal usage on the system or they may
    occur when booting into Windows Vista. Blue screens related to the
    Intel Turbo Memory hardware may reference a stop code of 8086 with
    memory address locations of {0, 0, 0, 0}.
    There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
    Step 1: Update Intel Turbo Memory Driver
    If the driver version is before version 1.0.1.1004-7.0.3.1001, please
    update to this version.
    To determine what version of the Intel Turbo Memory driver is installed:
    1.    Click Start, then click Control Panel.
    2.    Click System and Maintenance.
    3.    Click System.
    4.    Click Device Manager.
    5.    Expand the Storage controllers category.
    6.    Double-click Intel Flash Cache Logic Chip.
    7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
    The new driver and installation instructions can be found here.
    Note: The Intel Matrix Storage Driver is updated with this package.
    Step 2: BIOS version
    If your BIOS version is older than those listed below, please update to the version listed.
    How to check your BIOS version:
    Turn off the system.
    Turn on the system.
    While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
    The
    BIOS Setup Utility menu will be displayed. If you have set a supervisor
    password, the BIOS Setup Utility menu appears after you enter the
    password.
    Check BIOS Version and Embedded Controller Version.
    Turn off the system.
    System BIOS versions:
    ThinkPad X61 or X61s - BIOS version 1.06 (7NET25WW)
    Please
    remember that these updates do not solve every possible system blue
    screen, but they do resolve several problems related to the Intel Turbo
    Memory driver.
    Tim Supples
    Lenovo Social Media
    Got a question? Don't PM me, post it on the forum!
    Lenovo Blogs
    X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

    Dear Tim,
    First off, many thanks for the tips for resolving BSOD with Vista + Turbo Memory on X61.  I've been suffering from this BSOD for countless times since I bought in my X61 7673-CW9 in April 2008.
    Even prior to having the pleasure to visit this wonderful forum, I followed both steps as indicated, and updated my Intel Turbo Memory driver to 1.5.0.1013 and my BIOS to 7NETB4WW (2.14).  However, the BSOD recurrs.
    For the past two months, I've recovered my system to factory default settings using Rescue and Recovery for over twenty times, each time with the latest Intel Turbo Memory driver and BIOS.  Notwithstanding that, BSOD recurrs.
    During these painful experiences, I tried two options: 1) making my X61 up-to-date by using System Update and Windows Update (including Vista SP1 or excluding Vista SP1); 2) keeping my X61 the status as factory default (i.e. without updating through either System Update or Windows Update (the automatic/scheduled update function of both is turned off)).  In either case, BSOD recurrs.
    I'm 100% positive that the BSOD does not arise from any hardware or software/firmware I install.  I never install any hardware (e.g. RAM).  And, it is not caused by any software/firmware I install: the clear and unequivocal evidence is that at one time,I encountered BSOD while having restored back to factory setting and booting for the first time.
    I live in Taiwan, and I seldom heard this BSOD here.  All of my friends (as most of Taiwan residents) using X61 operate in Traditional Chinese environment, whereas I operate in English environment.  In Taiwan, when booting for the first time after purchase/recovery, the Windows Vista Business system provides for lanuage choice (Traditional Chinese or English), and, once chosen, the language cannot be altered later on (unless, of course, the system is restored back to factory default settings).
    My system specs are the same as the day I purchased it and are listed below (as I'm not sure if my machine type X61 7673-CW9 is applicable outside Taiwan):
    Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz
    Memory: 1.00 G.B.
    System: Windows Vista Business (32-bit)
    Hard Drive: 160 G.B. @ 7,200 r.p.m.
    And, of course, with Intel Turbo Memory 1 G.B.
    I contacted the Lenovo support staff here in Taiwan for countless times, but they seem to be clueless.  I learned that some friends at this forum downgraded their OS back to Windows XP, but I chose not to.  The reason is simple: my purchase price for X61 7673-CW9 includes the Intel Turbo Memory, which cannot function under Windows XP (at least so far).
    Therefore, I just wish to share my experience here and perhaps I can get some advice from you and other friends here.  Any advice will be tremendously and enormously appreciated.
    Kevin Chen @ Taiwan

  • Installation of Essbase 11.1.1.3 Client on Windows 2008 SP4 64bit

    Hi all,
    I`m trying to install Essbase Client 11.1.13 64bit on a Windows 2008 Server (64bit) . Setup runs fine but when I look into the installed directories and look for esscmd.exe oder essmsh.exe these files are not installed. The bin-directory contains only two files. startesscmd and startessmsh. When I want to reinstall it the setup program told me that the essbase client is already installed. So I delete the whole installation directory, the oracle directory, registry settings but setup still says that the essbase client is installed.
    So how to run the setup again and what could be the problem that the client installation is incomplete?
    Thx for your help
    Brgds,
    Millhouse

    CL wrote:
    Just out of curiosity, if you run startessmsh.bat, does it work?I wonder if he has deleted it :)
    Millhouse wrote:
    So I delete the whole installation directory, the oracle directory, registry settings but setup still says that the essbase client is installed.Have a search for .ora.products and delete or rename it if you find it.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Tip for ALL Graphics cards running under Windows

    PLEASE STICKY THIS
    This is a really useful tip for anyone running windows ME or XP.
    It doesn't matter what card your installing and it really helped me out once.
    Use System Restore
    System restore is a simple utility Microsoft came up with for things like registry changes or putting new hardware/software in.
    All you have to do is:
    1. Set up system restore to monitor the hard drives or partitions you want it too. This can simply be done by going to start>all programs (or program files)>accessories>system setup>system restore. Once the window has opened choose system restore settings and from here you can change what hard drives are monitored and how much disk space restore can use.
    2. Before you make a change to your card (whether it be drivers or putting a card in) open up system restore as in step '1' but choose create restore point. The system may hang for a minute then you will be told a restore point has been made.
    3. Now any change you make to anything to do with the operating system will be noted by windows and the unchanged vesion will be kept in that hard drive space you specified in step '1'
    4. Should the drivers screw up your system you can boot in safe mode (by hammering F8 between POST and OS loading screen) and when a dialog box comes up saying you have started in safe mode choose to run system restore.
    NOTE: BIOS changes can NOT be undone in system restore, and if your computer won't boot at all your  ed!!!
    System restore should not be used if your computer is running ok, or if you can resolve the issues by changing drivers, using system restore can bring back spyware, viruses and trojans! If there is a power failure or your PC crashes when running system restore yu may need to format your hard drive.

    Quote from: ratkid132 on 08-April-05, 02:31:10
    This is a really useful tip for anyone running windows 2000 or XP.
    It doesn't matter what card your installing and it really helped me out once.
    Use System Restore System restore is a simple utility Microsoft came up with for things like registry changes or putting new hardware/software in.
    System Restore is only available in Windows XP.
    Most video driver related problems can be solved by uninstalling the old drivers, rebooting, and cancelling the "found new hardware" dialog before running the new driver installer.

  • Instant client  on windows 2008 r2

    Hi,
    I've downloaded the zip files and followed the instructions here http://arswiki.org/wiki/Oracle_Instant_Client_-_Installing
    For some reason I can't launch sqlplus.exe as it keeps crashing. I just get Oracle SQL*PLUs has stopped working, check online for a solution or close the program. I need to be able to install instant client version 10 on windows 2008 R2 successfully. Please help. Thanks.
    ps: I've downloaded the zip files in 64bit also.
    Edited by: 790040 on Aug 23, 2010 12:34 AM

    Welcome to the forums !
    Pl post this in the Instant Client forum - Instant Client
    HTH
    Srini

  • Issues installing 11g client on windows 2008 R2

    Hi I am a windows admin and have been asked to install oracle SQL developer and oracle 11g client on a windows 2008 R2 server.
    However it will not work.
    After having issues and having to manually set environment variables and creating the folder path network\admin for the ora files, we still get the following issue
    "IO Error: The network adapter could not establish the connection"
    We have tried both 64 and 32bit versions.
    Any help here would be very much appreciated.
    Paul.

    Thanks for everyones response to this.
    First issue was the server we were installing this on is not on the domain and doesnt point to our internal DNS. Hence it couldnt resolve the Host name in the tns file.
    I added this to the hosts file, then we had to modify some of the registry entries and path manually.
    We were then able to succesfully make a connection.
    Paul.

  • Add User for Native PDF Conversion fails on Windows 2008 for WebSphere

    I'm installing LiveCycle ES3 Generator on Windows 2008 R2 server with WebSphere 8.  When I try to add users for the Native PDF conversion as part of the generator configuration I get an error.  I've included the installer log error and some of the related WebSphere logs below.  Anyone have any sugestions?
    Configuration Manager Install log:
    [2013-03-11 10:03:35,834], WARNING, Thread-11, com.adobe.pdfg.lcm.configure.users.AddPDFGAdminUserTask, Error while adding user to PDFG :ALC-DSC-005-000: com.adobe.idp.dsc.DSCNotSerializableException: Not Serializable
    Caused by: ALC-DSC-003-000: com.adobe.idp.dsc.DSCInvocationException: Invocation error.
              at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:152)
              at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor. java:140)
              at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
              at com.adobe.idp.dsc.interceptor.impl.DocumentPassivationInterceptor.intercept(DocumentPassi vationInterceptor.java:53)
              at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
              at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(Transa ctionInterceptor.java:74)
              at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doRequiresNew (EjbTransactionBMTAdapterBean.java:218)
              at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EJSLocalStatelessEjbTransactionBMTAdapter_ 3af08fdf.doRequiresNew(Unknown Source)
              at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:133)
              at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
              at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
              at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
              at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
              at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
              at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
              at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:188)
              at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
              at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
              at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
              at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121)
              at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:131)
              at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.invoke(AbstractMessageReceiv er.java:329)
              at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invokeCall(SoapSdkEndpoint. java:139)
              at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invoke(SoapSdkEndpoint.java :81)
              at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
              at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
              at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
              at java.lang.reflect.Method.invoke(Method.java:611)
              at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
              at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186)
              at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323)
              at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
              at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
              at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
              at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454)
              at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
              at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699)
              at javax.servlet.http.HttpServlet.service(HttpServlet.java:595)
              at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
              at javax.servlet.http.HttpServlet.service(HttpServlet.java:668)
              at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1214)
              at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:774)
              at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:456)
              at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java: 178)
              at com.ibm.ws.webcontainer.filter.WebAppFilterChain.invokeTarget(WebAppFilterChain.java:125)
              at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:92)
              at com.adobe.idp.dsc.provider.impl.soap.axis.InvocationFilter.doFilter(InvocationFilter.java :43)
              at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java: 192)
              at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:89)
              at com.adobe.idp.um.auth.filter.CSRFFilter.doFilter(CSRFFilter.java:86)
              at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java: 192)
              at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:89)
              at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:926)
              at com.ibm.ws.webcontainer.filter.WebAppFilterManager.invokeFilters(WebAppFilterManager.java :1023)
              at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.jav a:87)
              at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:895)
              at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1662)
              at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:195)
              at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink .java:458)
              at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewRequest(HttpInboundLink.jav a:522)
              at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.processRequest(HttpInboundLink.java: 311)
              at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:282)
              at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConn ectionInitialReadCallback.java:214)
              at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitia lReadCallback.java:113)
              at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionLi stener.java:165)
              at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
              at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
              at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
              at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:204)
              at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:775)
              at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:905)
              at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1783)
    Caused by: ALC-PDG-80000-000: com.adobe.pdfg.exceptions.ConfigException: ALC-PDG-080-000-Connection to failed service.
              at com.adobe.pdfg.config.PDFGConfigServiceImpl.validateUserCredentials(PDFGConfigServiceImpl .java:494)
              at com.adobe.pdfg.config.PDFGConfigServiceImpl.updateUserAccountsSettings(PDFGConfigServiceI mpl.java:870)
              at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
              at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
              at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
              at java.lang.reflect.Method.invoke(Method.java:611)
              at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.jav a:118)
              ... 71 more
    Caused by: java.lang.IllegalStateException: Connection to failed service.
              at com.adobe.service.ResourcePooler.allocateResource(ResourcePooler.java:96)
              at com.adobe.service.ConnectionFactoryManagerPeer.getConnectionResourceFromPool(ConnectionFa ctoryManagerPeer.java:79)
              at com.adobe.service.J2EEConnectionFactoryManagerPeerImpl.getConnection(J2EEConnectionFactor yManagerPeerImpl.java:103)
              at com.adobe.service.ConnectionFactoryRmiAdapter.getConnection(ConnectionFactoryRmiAdapter.j ava:54)
              at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
              at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
              at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
              at java.lang.reflect.Method.invoke(Method.java:611)
              at com.ibm.rmi.util.ProxyUtil$4.run(ProxyUtil.java:609)
              at java.security.AccessController.doPrivileged(AccessController.java:280)
              at com.ibm.rmi.util.ProxyUtil.invokeWithClassLoaders(ProxyUtil.java:606)
              at com.ibm.CORBA.iiop.ClientDelegate.invoke(ClientDelegate.java:1177)
              at $Proxy35.getConnection(Unknown Source)
              at com.adobe.service._ConnectionFactoryRemote_Stub.getConnection(_ConnectionFactoryRemote_St ub.java:59)
              at com.adobe.pdfg.config.PDFGConfigServiceImpl.getColorProfileService(PDFGConfigServiceImpl. java:1252)
              at com.adobe.pdfg.config.PDFGConfigServiceImpl.validateUserCredentials(PDFGConfigServiceImpl .java:487)
              ... 77 more
              at com.adobe.idp.dsc.provider.impl.base.AbstractResponseHolder.handleException(AbstractRespo nseHolder.java:150)
              at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkBindingStubUtil.deSerializeResponse( SoapSdkBindingStubUtil.java:132)
              at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapAxisDispatcher.doSend(SoapAxisDispatche r.java:132)
              at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:66)
              at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
              at com.adobe.pdfg.lcm.configure.users.AddPDFGAdminUserTask.run(AddPDFGAdminUserTask.java:76)
              at java.lang.Thread.run(Thread.java:619)
    Systemout
    [3/11/13 10:03:35:744 EST] 000000de ProcessResour A   ALC-BMC-001-505: Service ColorProfileSvc: Starting native process with command line "C:\\Program Files (x86)\\IBM\\WebSphere\\AppServer\\installedApps\\adobe\\server1\\ColorProfileSvc\\ColorPr ofileService.exe"  -IOR IOR:00bdbdbd0000002249444c3a636f6d2f61646f62652f736572766963652f4d616e616765723a312e3000b dbd000000010000000000000460000102bd0000000b4851324b38454945323500bd0000bdbd0000001f4c4d424 9000000154773e3aa001500050442522d3700080100000000000000bd0000000a000000010000001400bdbdbd0 501000100000000000101000000000049424d0a0000000800bd00011600000100000026000000020002bdbd494 24d04000000050005020102bdbdbd0000001f0000000400bd0003000000200000000400bd00010000002500000 00400bd000300000021000002d80001bdbd000000060002bdbd000000240000001e00bd00260002bdbd0000000 10000000b31302e312e32302e353400bd24bb00400000bdbd0000000806062b1200021e0200000028040100080 6062b1200021e020000001864656661756c7457494d46696c6542617365645265616c6d0000000000000000000 00000000000000042bdbd000000240000001e00bd00660042bdbd000000010000000b31302e312e32302e35340 0bd24ba00400000bdbd0000000806062b1200021e02000000280401000806062b1200021e02000000186465666 1756c7457494d46696c6542617365645265616c6d000000000000000000000000000000000002bdbd000000240 000001e00bd00260002bdbd000000010000000b31302e312e32302e353400bd24bb00400000bdbd00000008060 6678102010101000000280401000806066781020101010000001864656661756c7457494d46696c65426173656 45265616c6d000000000000000000000000000000000042bdbd000000240000001e00bd00660042bdbd0000000 10000000b31302e312e32302e353400bd24ba00400000bdbd00000008060667810201010100000028040100080 6066781020101010000001864656661756c7457494d46696c6542617365645265616c6d0000000000000000000 00000000000000002bdbd000000240000001e00bd00260002bdbd000000010000000b31302e312e32302e35340 0bd24bb00400000bdbd0000000806062b1200021e06000000280401000806062b1200021e06000000186465666 1756c7457494d46696c6542617365645265616c6d000000000000000000000000000000000042bdbd000000240 000001e00bd00660042bdbd000000010000000b31302e312e32302e353400bd24ba00400000bdbd00000008060 62b1200021e06000000280401000806062b1200021e060000001864656661756c7457494d46696c65426173656 45265616c6d0000000000000000000000000000000049424d21000000ba00bd00010000bdbd0000001057494d5 57365725265676973747279000000002149424d20576562537068657265204170706c69636174696f6e2053657 276657200bdbdbd00000008382e352e302e300000000007352f312f313200bd0000000a676d313231382e30310 0bdbd000000452863656c6c293a4851324b3845494532354e6f6465303143656c6c3a286e6f6465293a4851324 b3845494532354e6f646530313a28736572766572293a7365727665723100bdffff0001bdbd000000140000000 800bd00b6400224ba   -AppServer websphere
    [3/11/13 10:03:35:787 EST] 000007c2 ProcessResour W   ALC-BMC-001-024: Service ColorProfileSvc: Process ProcessResource@93771607(name=ColorProfileService.exe,pid=0) terminated abnormally with error code {3}
    [3/11/13 10:03:35:794 EST] 000000de ProcessResour A   ALC-BMC-001-505: Service ColorProfileSvc: Starting native process with command line "C:\\Program Files (x86)\\IBM\\WebSphere\\AppServer\\installedApps\\adobe\\server1\\ColorProfileSvc\\ColorPr ofileService.exe"  -IOR IOR:00bdbdbd0000002249444c3a636f6d2f61646f62652f736572766963652f4d616e616765723a312e3000b dbd000000010000000000000460000102bd0000000b4851324b38454945323500bd0000bdbd0000001f4c4d424 9000000154773e3aa001500050442522d3800080100000000000000bd0000000a000000010000001400bdbdbd0 501000100000000000101000000000049424d0a0000000800bd00011600000100000026000000020002bdbd494 24d04000000050005020102bdbdbd0000001f0000000400bd0003000000200000000400bd00010000002500000 00400bd000300000021000002d80001bdbd000000060002bdbd000000240000001e00bd00260002bdbd0000000 10000000b31302e312e32302e353400bd24bb00400000bdbd0000000806062b1200021e0200000028040100080 6062b1200021e020000001864656661756c7457494d46696c6542617365645265616c6d0000000000000000000 00000000000000042bdbd000000240000001e00bd00660042bdbd000000010000000b31302e312e32302e35340 0bd24ba00400000bdbd0000000806062b1200021e02000000280401000806062b1200021e02000000186465666 1756c7457494d46696c6542617365645265616c6d000000000000000000000000000000000002bdbd000000240 000001e00bd00260002bdbd000000010000000b31302e312e32302e353400bd24bb00400000bdbd00000008060 6678102010101000000280401000806066781020101010000001864656661756c7457494d46696c65426173656 45265616c6d000000000000000000000000000000000042bdbd000000240000001e00bd00660042bdbd0000000 10000000b31302e312e32302e353400bd24ba00400000bdbd00000008060667810201010100000028040100080 6066781020101010000001864656661756c7457494d46696c6542617365645265616c6d0000000000000000000 00000000000000002bdbd000000240000001e00bd00260002bdbd000000010000000b31302e312e32302e35340 0bd24bb00400000bdbd0000000806062b1200021e06000000280401000806062b1200021e06000000186465666 1756c7457494d46696c6542617365645265616c6d000000000000000000000000000000000042bdbd000000240 000001e00bd00660042bdbd000000010000000b31302e312e32302e353400bd24ba00400000bdbd00000008060 62b1200021e06000000280401000806062b1200021e060000001864656661756c7457494d46696c65426173656 45265616c6d0000000000000000000000000000000049424d21000000ba00bd00010000bdbd0000001057494d5 57365725265676973747279000000002149424d20576562537068657265204170706c69636174696f6e2053657 276657200bdbdbd00000008382e352e302e300000000007352f312f313200bd0000000a676d313231382e30310 0bdbd000000452863656c6c293a4851324b3845494532354e6f6465303143656c6c3a286e6f6465293a4851324 b3845494532354e6f646530313a28736572766572293a7365727665723100bdffff0001bdbd000000140000000 800bd00b6400224ba   -AppServer websphere
    [3/11/13 10:03:35:839 EST] 000007c5 ProcessResour W   ALC-BMC-001-024: Service ColorProfileSvc: Process ProcessResource@99362d6c(name=ColorProfileService.exe,pid=0) terminated abnormally with error code {3}
    SystemErr
    [3/11/13 10:03:35:778 EST] 000007c2 SystemErr     R system exception1096024066
    [3/11/13 10:03:35:778 EST] 000007c2 SystemErr     R Unknown Exception in doFlush()
    [3/11/13 10:03:35:778 EST] 000007c2 SystemErr     R AdobeServer::Logger: flusher terminated abnormaly
    [3/11/13 10:03:35:829 EST] 000007c5 SystemErr     R system exception1096024066
    [3/11/13 10:03:35:830 EST] 000007c5 SystemErr     R Unknown Exception in doFlush()
    AdobeServer::Logger: flusher terminated abnormaly

    I today finished installing on W2R2+WebSphere 8 LC ES4 with a similar error on XMLForm.exe. This link worked for me and my error was similar. 
    http://blogs.adobe.com/livecycle/2012/05/livecycle-xmlforms-native-process-and-websphere-g lobal-security.html

  • Oracle 11g Client on Windows 2008 6.1

    Hi All,
    Is Oracle Client 11.1.0.7.0 certified on Windows 2008 6.1 OS??
    Thanks
    SR

    Only 11gR2 is certified on Windows 2008.
    http://download.oracle.com/docs/cd/E11882_01/install.112/e10844/pre_install.htm#CIHIAGFG

  • Need steps for rehosting FR currently running on windows 2008 R2 to LinuxOS

    Need steps for rehosting FR server currently running on windows 2008 R2 to Oracle Linux 5 OS
    I found something for essbase in oracle EPM whitepaper library but not for FR. Did anyone of you out there try this.
    Any ideas/thoughts.
    Thanks in Advance

    If it's 11.1.2.1 or 11.1.2.2 you simply install it in the new host, configure it and you can either manually edit the mod_wl.conf file to point to the new server or you can re-run the web server (OHS) configuration wherever it is installed. Beware though that if you do this you will not be able to run FR against HFM.
    Pablo

  • Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on T61/T61p

    Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD. This information can help address blue screen errors specifically related to Turbo Memory, but may not solve errors related to other issues. Please read through the instructions completely, make sure they apply to your system, and after attempting the solutions please post back with your feedback for the community.
    Some users may experience random blue screen errors with ThinkPad
    systems running Windows Vista with Intel Turbo Memory hardware. These
    blue screens may occur during normal usage on the system or they may
    occur when booting into Windows Vista. Blue screens related to the
    Intel Turbo Memory hardware may reference a stop code of 8086 with
    memory address locations of {0, 0, 0, 0}.
    There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
    Step 1: Update Intel Turbo Memory Driver
    If the driver version is before version 1.0.1.1004-7.0.3.1001, please
    update to this version.
    To determine what version of the Intel Turbo Memory driver is installed:
    1.    Click Start, then click Control Panel.
    2.    Click System and Maintenance.
    3.    Click System.
    4.    Click Device Manager.
    5.    Expand the Storage controllers category.
    6.    Double-click Intel Flash Cache Logic Chip.
    7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
    The new driver and installation instructions can be found here.
    Note: The Intel Matrix Storage Driver is updated with this package.
    Step 2: BIOS version
    If your BIOS version is older than those listed below, please update to the version listed.
    How to check your BIOS version:
    Turn off the system.
    Turn on the system.
    While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
    The
    BIOS Setup Utility menu will be displayed. If you have set a supervisor
    password, the BIOS Setup Utility menu appears after you enter the
    password.
    Check BIOS Version and Embedded Controller Version.
    Turn off the system.
    System BIOS versions:
    ThinkPad T61/T61p (14.1 inch widescreen with IEEE 1394 model) - BIOS version 1.22 (7LET52WW)
    Please
    remember that these updates do not solve every possible system blue
    screen, but they do resolve several problems related to the Intel Turbo
    Memory driver.
    Message Edited by Tim_Lenovo on 11-30-2007 07:03 PM
    Tim Supples
    Lenovo Social Media
    Got a question? Don't PM me, post it on the forum!
    Lenovo Blogs
    X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

    Thanks Tim,
    I do have my T61p fully up-to-date to the latest drivers and updates (via System Update and the Drivers&Software web page when the former is not that up-to-date).
    At the moment the most recurrent problem is this:
    http://forum.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=55
    which has been longly speculated here:
    http://forum.thinkpads.com/viewtopic.php?t=47755
    My other angst is the boot-time chkdsk hang-up problem:
    http://forum.thinkpads.com/viewtopic.php?t=52765&highlight=chkdsk
    I just wonder if this purely a Vista issue when using NV cache, the disk spinning down at almost exactly 1 hour from the beginning of the chdsk operation seems too much of a coincidence.
    This is my T61p configuration:
    Intel Core 2 Duo T7700 2.4GHz
    BIOS version 1.26-1.06
    4GB RAM 2 SO-DIMMs
    nVidia Quadro FX 570m with 512MB VRAM
    WUXGA LCD
    Seagate 7200.2 160 GB
    4GB RAM 2 SO-DIMMs
    Windows Vista Ultimate 32bit (waiting to move to 64bit)
    thanks,
    andrea
    Message Edited by abarbieri on 12-05-2007 03:48 PM
    T61p - 15.4" - T7700 - FX 570M 256MB - 4GB RAM - ST916023AS - 4965AGN - BT - FPR - 9 cell - Vista Ult. x86
    T21p - 14" - PIII 850MHz - S3 Savage/IX 8MB - 512MB RAM - 100GB 7200rpm - WinXP x86

  • Tips for Restoring Without Migration Assistant?

    I'm upgrading my HD this week and looking for a humane way to restore my data without using Migration Assistant, used for the past five restorations...corrupt files and all. I long for a fresh start but dread the old, tedious method of restoring data by hand. Is there an easier way? If not is there a guide for what settings files I can safely bring over and what to avoid? I'll have a bootable SuperDuper or CarbonCopy Cloner backup.

    I'm actually with you 100% on this baltwo. There really is very little that can't be resolved with a fresh reinstall of Snow Leopard's default installation. So the options are as follows starting with the easiest and progressing to the more difficult:
    A. Clone the legacy OS & User Accounts back over to the new drive, followed by a default SL Install + Software Update to freshen the OS if so desired.
    B. Install the OS and use Migration Assistant to restore all User Accounts and Applications.
    C. Install the OS and use Migration Assistant to restore ONLY user data (Photos, Music, Videos, Documents, etc...). Followed by reinstalling all 3rd-party apps and manually configuring all previous settings (i.e preferences & networking).
    D. Install the OS and manually moving only desired user data and reinstalling all 3rd-party apps and manually configuring all previous settings (NOTE: This option is reserved for only the most extreme circumstances as it involves a serious commitment of time and introduces the potential for permissions issue when trying to integrate legacy user data with a virgin user account).
    Like baltwo, I have never had to perform options D, and option C perhaps only once. My user accounts, and all of their data, have successfully been migrated across some 5 Macs since the option to do so was introduced. I believe I still have some data within my primary user account that was generated back in the OS 8 & 9 days.
    Rest assured, when problems arise they are rarely the result of data found within your user account and are more likely the result of corrupt OS or App files. As a result I have never hesitated to migrate my complete user account over when I upgraded my Mac. OS Software and Apps may come and go, but my user account is rock solid and completely portable with the help of Migration Assistant. I think baltwo would agree.

  • Some help needed for installation of rich client component runtime demo

    i have dwnld the demo and also read the Instructions
    And while installing it asks jre/java path and my jdk is intalled in this path C:/Program Files/Java/jdk1.6.0_27/bin/
    And i have typed the same path with java.exe at the last but it its says Insert a valid path.
    How can i give the correct path.
    And the another question is that, i have jDeveloper 11g 11.1.1.5.0 installed with Weblogic Server, does the installation package also contains WLS or only the war file?

    Hi Shay,
    the file i downloaded was over 900MB. So i want to know that it contained WLS also or the war file was so big as i have WLS installed. And the compressed archive had two folders named Disk 1 and Disk 2 and the Disk 1 had an exe file and when i run the file a command prompt like windows opens. At this point the path is asked.
    So to directly download the war file i searched google and i got a link to this page
    http://jdevadf.oracle.com/adf-richclient-demo/docs/release.html#Download
    where these file were found
    SHERMAN rcf-dvt-demo.war
    SHERMAN adf-faces-demo.ear
    But i couldn't download these files. or may be they were not available.
    The 900MB file i downloaded is from this link:
    http://www.oracle.com/technetwork/developer-tools/adf/documentation/adf-faces-rc-demo-083799.html
    "Installing the ADF Faces Component Demo
    Download the ADF Faces rich client component runtime demo web archive (WAR) file and store it on the local file system (e.g. c:\rcf-dvt-demo.war). Once Oracle WebLogic Server 10.3 is installed and started, open the WebLogic administration console in a browser window. To access the WLS console, type "http://localhost:7001/console" into the browser address field, assuming that Oracle WebLogic is installed on the local machine with the default port configured at 7001."
    And it forwarded to this page:
    http://www.oracle.com/technetwork/developer-tools/adf/downloads/index.html
    As i had jDeveloper 11g 11.1.1.5.0, i downloaded the right version.
    So can you provide the war/ear file directly?

  • Need info for installation of SAP XI on Windows server 2003

    Hi All,
    I need system requirement  ( hardware and software) for the installation of SAP XI 3.0 only on Windows server 2003.
    It would be great if  anyone can share the installation steps.
    Thanks in Advance...
    Regards
    Venkatesh

    Hi venkatesh,
    Plesae go through these links.
    Procedure to install :
    http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
    Configuration Guide
    http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
    A Beginner?s Guide to SAP XI Settings, Part I
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
    Guide to SAP XI Settings, Part II
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
    General Configuration Steps
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/230240d981e469e10000000a155106/content.htm
    SAP Exchange Infrastructure (XI) : Installation & CONFIGURATION GUIDE
    http://help.sap.com/saphelp_nw04/helpdata/en/d7/f01a403233dd5fe10000000a155106/frameset.htm
    Personal Settings
    http://help.sap.com/saphelp_erp2004/helpdata/en/e9/c4cc9b03a422428603643ad3e8a5aa/content.htm
    Roles and Tool Access : Administration, Technical Configuration,Design,Configuration,Monitoring
    http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm
    http://www.forumtopics.com/busobj/viewtopic.php?t=59586&start=15&postdays=0&postorder=asc
    SLD:
    How To?Handle the SLD for SAP XI
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
    How To?Handle Caches in SAP XI 3.0
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
    Refer these post installation links
    http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
    Link for posnt installation guide
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
    https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
    2004s PI installation - help.sap.com:
    http://help.sap.com/saphelp_nw04s/helpdata/en/78/f59442062bcd6ae10000000a155106/frameset.htm

Maybe you are looking for

  • User Access Code

    I have a new LaserJet 600 M602 networked to Windows 7 64 bit PC.  I have no recollection of setting a user access code on the printer.   How can I get past the User Access Code to check print cartridge status, etc.?  Or is there a factory default cod

  • How to get Entourage to recognise spam flags from SpamAssassin

    Hi. Rather simple question (I'm hoping). Have Tiger Server set up and flagging junk mail with the usual header flags, as well as modifying the subject (prepending "[ Junk Mail ]") but Entourage seems to be ignoring this for its filtering. Do you know

  • In invoice sum of weight for the calculation of a item condition transport

    Hy all, I created 2 order with the same sold to party but two different ship to party. In these sales order I have a transport condition type with a Freight condition category. For this item condition, I created condition records via VK11. The scale

  • Import contacts (excel spreadsheet) in to TMS phonebook

    Hi, I'm looking for an option to import contacts saved in excel spreadsheet in to the TMS manual phonebook? How to do that? I'm running out of ideas. Thanks...

  • CO11N - goods movements button

    At TX CO11N is a button called Goods Movement and i need to know if Ican disable that button? and provide access to a limited group of users. Thanks in advance!