Tips for solving red reddish color problem in Flex2-14

My flex2-14 screen color was very reddish, so I was trying to calibrate the color using the calibration tool in control panel. However, it is not satisfied.
I have solved the problem using Intel HD display tool in Control panel.
Open the Inten HD display tool, then increase blue contrast as 52, increase blue gamma as 51, increase color saturation as 8..
Then, it would be better..

I am not sure this..
Instead of if pls give while and check:
try{
while(rsValue.next()) {
g.setFont(fntHeading);
g.setColor(Color.red);
g.drawString("Main Report",200,100);

Similar Messages

Tips For Solving the Mac OS X Lion Slowness (Lots of Beach Balls)

Hi Folks,
Just a quick list of tips for this issue that some of Mac OS X Lion users face.
The main symptom is that we get the Beach Ball on almost any task, it takes 4, maybe five times more time to do what we need to do. So depending on the schedule, it can drive us crazy. I was facing that, and started to think that Lion was a Windows Vista relative.
Please remind that the tips below involve backing up and restoring your system. If you are not careful, you may lose everything. You are responsible for your acts. Be cautious!
How I solved my issue:
1) Checked for Disk Permissions and the Disk itself:
- Applications / Utilities / Disk Utility:
- Click on your disk, and then VERIFY DISK. If everything is OK, move on. If it is not, REPAIR DISK.
- Now click on VERIFY DISK PERMISSIONS. If everthing is OK, move. If not, Repair.
This step 1 is to make sure that your slowness is due to something related to the OS itself and not to permissions/disk.
If this solves the slowness, then you are OK. Now further steps are necessary. In my case, this just helped a little bit. The beach-balling reduced by 20% only. Still too slow.
2) Do a full backup of your system.
I used Time Machine. Make sure you have all of your applications closed. So the backup will be full. If you fail to do a good backup, you will lose everything! Make sure you do a good one. Maybe do it twice on 2 different disks! Now you have been warned.
3) Do a Full Restore of your entire system.
Now, get that Install CD that came with your Mac,
- Put it on your drive, shut down your computer.
- While holding the C key, press the start button of your Mac. It will boot using the Install CD that came with your Mac.
To recover your entire system:
Connect your Time Machine backup disk to your computer. If you’re restoring your system because of a problem with your startup disk, make sure the disk has been repaired or replaced.
Insert your Mac OS X Install disk, and double-click the Install Mac OS X icon.
In the Installer, choose Utilities > Restore System from Backup.
In the Restore Your System dialog, click Continue.
Select your Time Machine backup volume.
Select the Time Machine backup you want to restore.
Follow the onscreen instructions.
4) Remove the CD, and boot.
When I did that, the system came back very fast and responsive. No more beach balls (only on the really-intensive tasks), and everything was back to normal.
5) So, what was it anyways?
Before doing this Backup/Restore, I was getting lots of DISK I/O ERRORS, specially during boot time (you can check that by shutting down your mac, powering it back on and imediatelly pressing Command-V - Verbose Mode).
Sure, the first thing in mind was that I had a faulty hard drive, but I checked it several times for errors (via Disk Utility), and nothing showed up.
So I decided to do a full backup/restore of the system. And it solved it, at least for me.
My config:
MacBook Pro (2009 edition) - 5 GB RAM - 640 GB HD - Mac OS X 10.7
Regards.

Also my mac will not complete my 5 software updates, no idea which software, but it said it could not do it. Also backing up with time machine had failed twice today. Thanks

Tutorial for solving some media manager problems

Hey gang,
Hopefully me posting this isn't bad forum etiquette, but I recently published a tutorial that details some fixes and "best practices" for properly importing media and getting rid of some pesky media manager errors:
http://library.creativecow.net/lyon_matt/fixing-fcp-assets/1
Full disclosure: I get something like a $0.01 per page view, but I'm not expecting to get rich. I just wanted to spread the word because I know lots of people experience Media Manager problems.
Feedback is definitely welcome!
Matt Lyon
Editor
Toronto

I think it's just a great article and is of more value than 1 cent I just offered by reading the article...
Rienk

Tips for Analyzing a Vocal Audio Problem?

I am having the most incredible bad luck with an audio quality issue that is, 99% of the time, VERY easy to deal with in AA. I have a female lead vocal track recorded last year that sounds, just on the louder notes, like it has a brittle, high-frequency rattle (for lack of more specific terms). It isn't likely to be distortion, since I carefully tracked any clipping issues at every stage (though I certainly am not the world's expert on distortion/harmonics).
I thought it would be a 30-second treatment with the EQ...find the offending frequencies and lower them. But I can't seem to find them! I have swept a sample of the file through what seems like hundreds of frequencies in the AA parametric EQ, and tried all the filter tools I could find.
Can anyone suggest a better way in AA3 to analyze this file?
I'm not necessarily looking for how to fix this particular problem, since my description of "brittle, high-frequency rattle" is really fuzzy. I'm just hoping there's some tool in AA3 that I have missed or zoned on.
Thanks!
Ken

>I thought it would be a 30-second treatment with the EQ...find the offending frequencies and lower them. But I can't seem to find them! I have swept a sample of the file through what seems like hundreds of frequencies in the AA parametric EQ, and tried all the filter tools I could find.
>Can anyone suggest a better way in AA3 to analyze this file?
In practice there's only one reliable way to do this - and it involves the parametric EQ. You select one band only, and a relatively high Q value; at least 15-20 usually. You then set this band to about 20dB
boost, and sweep it up and down over the offending material. When you find one of the trouble spots, it's going to shriek out at you. But at least then you will know which frequency to cut, and with a bit of experimentation, you should be able to come up with suitable settings. It's always worth experimenting with the Q values when you do the cut as well - you want the lowest value and shallowest cut you can get away with - but if you can manage to pinpoint just one offending frequency, you may well get away with less cut and more Q - you have to experiment.
It's very rare that any other method of analysis is good enough to do what's required - spectral response graphs often don't have the resolution, and if you set the FFT size high enough, then they can't operate in real time - or quickly enough at all, in fact. So the EQ 'boost' method remains favourite...

Ideas for solving a unique Exchange problem

Hey all,
I have a customer with a Root/Child domain type environment. All windows AD users exist in the child domain. The exchange 2007 mailbox database exists in the root domain.
I have the OIM AD connector connecting to the child domain with an account in the enterprise admin group and in the exchange organization admins group.
I have tested and verified the OIM service account can provision exchange mailboxes via the powershell command from the child domain.
The problem lies within the Oracle Ad/Exchange connector. It's trying to pull user data from the child domain while also pulling exchange mailbox database info from the root domain. Oracle claims that multi-domain functionality isn't supported and will be available in a future release in 2010.
So that isn't going to work for the customer.... and I'm looking for some ideas.
I have seen the script that is run by OIM to create the mailboxes, the script is passed three values (userid, mailbox database and a log file). Since the mailbox database is going to be static, I don't necessarily need OIM to allow selection of multiple databases and therefore don't need OIM to browse exchange on the root domain. Is there anyway I can bypass this and statically set this database value that is passed to the mailbox creation script?
I'm sure someone else has seen an environment like this before and I am open to some other ideas.
Does Oracle support a scripting function perhaps that i can pass values to to trigger the powershell mailbox creation command outside of the AD connector? At this point, I'll take whatever ideas i can get outside of modifying the customers environment to a single domain. That's not an option.
Thanks in advance.

The 1st step i would take is seeing what values are being mapped to the different steps. If you could map a diffrent root context at one of the steps in the adapter factory or different connection info.
-Kevn

How to solve the Embed Color Profile problem...

Hi Everyone,
This vijay from Chennai. I have one doubt for rectify the Embed color Profile problem, that's is how can i judges whether the file had Embed Color Profile or not. anyone solve this problem.
Thanks in Advance.
-yajiv

I used another profiles name, because I dont have the old one installed anymore, Youll have to be exact about the letters though.
And from a prepress-standpoint Id like to point out that removing the profile as opposed to »Convert to Profile« seems a peculiar practice, though of course Your reasons for doing so may be valid indeed.
You could try:
var myDocument = app.activeDocument;
if (myDocument.colorProfileName == "U.S. Web Coated (SWOP) v2") {
// =======================================================
var idassignProfile = stringIDToTypeID( "assignProfile" );
var desc2 = new ActionDescriptor();
var idnull = charIDToTypeID( "null" );
var ref1 = new ActionReference();
var idDcmn = charIDToTypeID( "Dcmn" );
var idOrdn = charIDToTypeID( "Ordn" );
var idTrgt = charIDToTypeID( "Trgt" );
ref1.putEnumerated( idDcmn, idOrdn, idTrgt );
desc2.putReference( idnull, ref1 );
var idmanage = stringIDToTypeID( "manage" );
desc2.putBoolean( idmanage, false );
executeAction( idassignProfile, desc2, DialogModes.NO );
else {

Epson 2200 Color problem solved...I think

I have read the posts on the color problems with 10.6 and the EP 2200. I too had the same issues after installing 10.6 this evening. After much teeth grinding and some choice words I set about solving my printing problem.
The Gutenprint driver has the same problems GIMP had. It isn't really printer specific, as in all the options you once had. I would rather have no driver than have this lame piece of software automatically installed. Gutenprint will make the printer run but that's about all it will do.
The solution is pretty easy:
1. Open System Preferences. Click on Print and Fax
2. Select the 2200 (or any printer giving you fits) and click the to delete the printer. Close prefs.
3. Go to the Epson site and download the 10.4 driver, Epson 11832. Install.
4. Also download the 10.6 updater and install.
5. Open System Prefs>Print and Fax again.
6. Click the and select the printer model, in my case Epson 2200.
7. In the drop down window Select Epson SP 2200 not the Epson Stylus Photo 2200 - Gutenprint v5.2.3! The latter being a Jack of all Trades and Master of none.
8. All the print functions reappear as expected.
Do I believe the reports of Epson dumping on the Mac market? Not a chance. Mac has the majority (well over 50% and growing) of the graphic and creative arts market. Most professional photographers I know use the Mac platform and are very enthusiastic about it. Epson couldn't afford to turn their backs on the Mac platform.
With 10.6 I did loose all my custom icc profiles from PS but not PS Lightroom. I also lost the custom monitor profile. I will re-profile my paper/ink/scanner/monitor and consider it a light hit. I'm sure I don't know why this update was so rough on the drivers. I'm also sure that there will be other pains I have yet to discover.
Is 10.6 crap? Probably not. Will I install 10.7 when it arrives? You bet! At OSX worst it is better than Gate's best!!

This is all good info, but for me at least, the real issue is not whether you can get the driver/printer to function (most people seem to be able to get it working) but when you get it functioning under Snow Leopard are there color issues.
Although the printer may work fine for basic documents etc, it is for color-critical photo work that I need my 2200. Many other posts are reporting that although the driver is functioning, there are fairly severe color issues when trying to create high-quality photographic prints using the standard color-managed workflow. This would be rather crippling for photographers and other artists who rely on their 2200.
Maybe those posting here could comment on whether they have been using their 2200 for photographic purposes and whether or not they have seen color issues. I wonder if some people just aren't noticing a problem because they aren't doing color-managed photographic work.
I haven't installed Snow Leopard yet and I'm trying to determine if this is affecting a very small percentage of people or if everyone is having trouble getting proper color from their 2200 since Snow Leopard. So far I haven't seen a single post specifically stating that they they are using the 2200 for high quality photo printing and have had no color issues under Snow Leopard.
Message was edited by: Bazzography

Firefox crashing when i wanna open or close a tab or a window, also while wanna open any page, now what to do for solving the problem?

Firefox crashing when i wanna open or close a tab or a window, also while wanna open any page, now what to do for solving the problem?

Disable McAfee siteadvisor and check the problem still persist or not?

Looking for tips on a OC4J/JNDI lookup problem

Hello All,
I am running into a situation where a user I have setup in Oracle Enterprise Manager 10G Instance Level Security is not able to access our JNDI resources. We have tried providing all the roles(including administrators) to this user, but to no success. For some reason it works in standalone though.
Our exception is fired when deploying the application and the spring configuration tells the app to fetch the jms connection factory from JNDI.
Caused by: javax.naming.NoPermissionException: Not allowed to look up jms/ConnectionFactory, check the namespace-access tag setting in orion-application.xml for details
+     at com.evermind.server.rmi.RMIClientConnection.handleLookupResponse(RMIClientConnection.java:873)+
+     at com.evermind.server.rmi.RMIClientConnection.handleOrmiCommandResponse(RMIClientConnection.java:337)+
+     at com.evermind.server.rmi.RMIClientConnection.dispatchResponse(RMIClientConnection.java:296)+
+     at com.evermind.server.rmi.RMIClientConnection.processReceivedCommand(RMIClientConnection.java:278)+
+     at com.evermind.server.rmi.RMIConnection.handleCommand(RMIConnection.java:152)+
+     at com.evermind.server.rmi.RMIConnection.listenForOrmiCommands(RMIConnection.java:127)+
+     at com.evermind.server.rmi.RMIConnection.run(RMIConnection.java:107)+
+     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)+
+     at java.lang.Thread.run(Thread.java:595)+
+     at com.evermind.server.rmi.RMICall.warningExceptionOriginatesFromTheRemoteServer(RMICall.java:109)+
+     at com.evermind.server.rmi.RMICall.throwRecordedException(RMICall.java:91)+
+     at com.evermind.server.rmi.RMIClientConnection.waitForJndiResponse(RMIClientConnection.java:425)+
+     at com.evermind.server.rmi.RMIClientConnection.lookup(RMIClientConnection.java:233)+
+     at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:302)+
+     at com.evermind.server.rmi.RMIClientContext.lookup(RMIClientContext.java:56)+
+     ... 43 more+
I wonder if there is a specific role that OC4J is looking for to allow the app to use JNDI? One thread I read earlier mentioned granting the user RMI permission. Any tips on where this could be configured?
Our namespace section of the orion application xml file is below...
     <namespace-access>
          <read-access>
               <namespace-resource root="">
                    <security-role-mapping name="<jndi-user-role>">
                         <group name="administrators" />
                    </security-role-mapping>
               </namespace-resource>
          </read-access>
          <write-access>
               <namespace-resource root="">
                    <security-role-mapping name="<jndi-user-role>">
                         <group name="administrators" />
                    </security-role-mapping>
               </namespace-resource>
          </write-access>
     </namespace-access>
Any thoughts or recommendations for isolating and troubleshooting the problem would be highly appreciated.
Many Thanks in Advance Guys!

What Mylenium said. Although, perhaps with Forge Freeform and a huge amount of work, you might be able to fake it.

I rent a movie on iTune, dowloading on my ipad2, the movie stop reading from chapter 10, and an alert inform me when i try to Start the movie that i cannot read it. What is the issue for solve this problem?

I rent a movie on iTunes stores, downloading it to my iPad2, but during the movie, the reading stop from capter 10 to End. I try to restart it, but an alert message inform me that i cannot read the movie. What is the issue for solve this problem? The movie is still located on apps movie, but i cannot read it. Please help.

Having the same problem. Watched 25 minutes of a rental and it stopped with the message"unable to load video"
Using current version IPad mini.
Ios7 is HUGH PIECE OF CRAP!!!!

Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

Hi
Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
A reinstall should leave all your own personal data and programs in place.
Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
Message was edited by: softwater

Help me for solve this Question this is my problem

help me for solve this Question this is my problem
i installed EBS 11i fresh not vision
i did cart of account and did set of book
then assigned it with profile option gl set of books name
and when enter to make ajournal appeare this messege
[http://www9.0zz0.com/2009/10/06/03/232202588.jpg]
[http://www9.0zz0.com/2009/10/06/03/634050066.jpg]

Hi,
Not sure why are you getting this kind of error (which is pointing to a URL with Jpg file) while creating a journal.
Could you please bounce your server once and try..
Please let us know if the error/warning stopping you to enter a journal in GL??
We don't think profile option is a show stopper here.... We assume that you have assigned Sets of Books, MO: Operating unit & HR USer Profile option at Responsibility level correctly....
Regards,
S.P DASH

My iphone 4 lock button does not work, i turned it off using assesive touch, now it wont turn back on? got any tips for fixing this problem!

my iphone 4 lock button does not work, i turned it off using assesive touch, now it wont turn back on? got any tips for fixing this problem!

Hi, braidenwhitesidemate.
Thank you for visiting Apple Support Communities.
I would recommend going through the steps in the article below. If the issue persists, see the section labeled Issue not resolved.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
Jason H.

I also have a color problem when Save For Web

Using Photoshop CS4 and I also have a problem when I use the "Save for Web & Devices" My colors also get bleached. I found a thread with the same problem but on Windows.
As I have a Macbook Pro I can not change my monitor settings. In the SFW I check "Convert to sRGB" but it make no difference. I also tried to convert in the menu before using SFW. So I need some help here.
Here is a screen shot on my screen: http://www.scancyp.com/dump.jpg

Magooi wrote:
Also I was wondering why?
You need to calibrate and profile your monitor regularly and often
First: Because monitors can and do drift. In CRTs all kinds of electronic components and the phosphors themselves age; in LEDs and LCDs the back-light illuminants do; etc.
Second: Monitor profile files can and occasionally do get corrupted.
I validate the calibration of my monitors practically on a daily basis.
If you don't have an accurately profiled monitor at all times, your work is wasted.
Magooi wrote:
But it's a whole science to calibrate the monitor without a hardware calibration kit. I had a look at SuperCal as you suggested, but I am afraid it's gona be too complicated for me as I think it's hard enough to calibrate with the Apple calibration tool.
Even the cheapest hardware calibrator puck will give you superior results than any eyeball calibrator. That said, SuperCal is a tad better than Apple's built-in eyeball calibrator, though nowhere as good as a hardware calibrators.
Personally, I detest laptop screens and categorically do not consider a MacBook Pro a suitable machine for serious color work. For this reason, I cannot in good conscience insist on your buying a hardware calibrator.
Laptop screens can be nearly impossible to calibrate accurately.
Magooi wrote:
I have made a new screen shot with my results so far. Upper left is Photoshop original. To the right the SFW and lower left the preview result. The SFW result still don't give me the colors I want, but as I said: closer then before.
Screen shots from an uncalibrated or inaccurately calibrated monitor are worthless, always. They do not help at all, especially when they are partial snippets that don't show the whole picture.
This time around they are even worse, as I cannot see whether you rectified your Preview setting in the Save For web dialog box to "Use Document Profile", as I told you earlier:
You have to start by changing that setting in the Save For Web dialog box to "Use Document Profile".
Is your original document in a device independent color space (i.e. was your working colorspace set to such a device-independent color space like Adobe RGB or sRGB when you created the original) and is it properly tagged (does it have such a device independent profile embedded)? If the answer to any of that is no, all your work is wasted.
If your working space is set to your Monitor Profile, then your work is a useless mess. If the original is in your Monitor Profile, it's no good either. Same goes for the Preview setting in the Save For Web dialog box, if it's set to Monitor Profile, it's useless.
If you view any untagged image (any image without a device-independent profile embedded) in any Apple application, be aware that any such Apple application, From the Finder, through Preview, Aperture and iPhoto to Safari, will throw your monitor profile at your image (assuming it's really in your Monitor Profile) and it will display your image in the wrong colors, as all Apple applications stupidly assume that all untagged images were created by some fool who didn't know better.
Magooi wrote:
But now my main questions is:
Why the Original in the Photoshop SFW don't look like the original? And then why the Optimized in the SFW also don't look like the the preview? (Specially look at he shadows of the palm tree that shows in the Optimized but not in the preview)
I have no idea what all your other color settings throughout the whole application and in the Save For Web box are, what else may be messed up on your machine, or how badly inaccurate your monitor profile is. Again, your screenshot is not helpful and never will be—unless you had an accurately profiled monitor, which you will never be sure you have on your laptop, ever.
Magooi wrote:
And again, should I invest in SuperCal? It seems also to be very old.
SuperCal is better than Apple's calibrator, regardless of whatever its age may be at this point. Last time I checked, SuperCal was free. If they want to charge for it now, don't buy it. It's not worth it for a laptop screen.
On a side note, if you think SuperCal is "too complicated" for you, I doubt you're ready for Photoshop anyway, even with a better machine. Sorry, no offense meant, but it wouldn't be fair to you if I didn't tell you exactly how I feel.

Having lagging problems with YouTube videos, it simply takes so long for the red bar to completely load and the videos frequently pause and take too long to restart playing again.

I have been having lagging problems with YouTube videos for a number of months now. It simply takes so long for the red bar to completely load and the videos frequently pause and take too long to restart playing again. Even with little 2 and 3 minute videos.
I have a fast computer and my webpages load really, really fast. I have FireFox 4 browser and a Vista Home Premium 64-bit OS. So I don't have a slow computer or web browser. But these slow YouTube vids take way too long to load for some reason.
Does anyone have any idea how I can speed up YouTube?

Hi
The forums are customer to customer in the first instance, Only the mods (BT) will ask for personal information through a email link. Would you mind posting your Hub stats & BT speed test results this will help all with diagnosis-
To post the full stats from your router
for home hub - 192.168.1.254
Navigate to ADSL Settings or use the A-Z at the top right
Click on More Details and then post the results.
Run BT speed tester and post the results from http://speedtester.bt.com/
If possible it would be best to connect to the BT master socket this will rule out any telephone/broadband extension wiring also consider the housing of the hub/router as anything electrical can cause problems as these are your responsibility, if these are found to be the case Openreach (engineer) will charge BT Broadband, which will be passed onto you, around £130.00.
Noisy line! When making telephone calls, if so this is not good for your broadband, you can check-
Quite line test dial 17070 option 2 and listen - should hear nothing best done with old type analogue phone digital (dect) will do but may have slight hiss If you hear noise- crackling pops etc, report it as a noisy line on your phone, don’t mention broadband, Bt Faults on 151.
As for your FTTC its available in some areas between 40% & 80% of customers in enabled areas can receive it!
Mortgage Advisor 2000-2008
Green Energy Advisor 2008-2010
Charity Health Care Provider Advisor 2010-
I'm alright Jack....

Tips for solving red reddish color problem in Flex2-14

Similar Messages

Maybe you are looking for