"Tips" not working in PSE 8.0

When I try to use the "tips" (lightbulb) I get an erro message something about Adobe Airs and the program has to be re-installed. But trying to reinstall the program is difficult. I have to uninstall - there is no repair!!
any sugggestions?
thanks
tim

Download the latest version of adobe air from this link
http://get.adobe.com/air/ and try. It might be an issue to Air.
Else reinstalling is adviced.
-garry

Similar Messages

Watch Folder not working in PSE 8

My understanding is that My Pictures folder is automatically under Watch Folder list. However, whenever I create a subfolder within My Pictures in the Explorer and put picures in it, my media browser in PSE 8 does not show me those pictures in that folder. Why? It seems I have to manually add every subfolder within My Pictures to Watch list. Is that true or what am I doing wrong?
Thanks!

Hello,
Does anyone have any suggestions to my question? I did not get any responses.
Everytime I add pictures to any sub folder in the My Pictures, I do not see that in photoshop (PSE 8). I have to import each one o f them manually. Why is my Watch Folder not working?
Thanks

Contact Sheet II not working in PSE 12 suddenly

I have created contact sheets before in PSE 12 with no problem, but this is the first time I have done it since upgrading to Yosemite on my Macbook Pro. Now I get the following error screen. I tried going in through Elements Organizer and notice that the folders showing there do not correspond with the actual folders on my hard drive. I'm puzzled as to why that would be and how to fix. Maybe these are two separate issues. Since I don't use Organizer, my more pressing issue is creating contact sheets. Thanks.

See if the solution described here works:
https://forums.adobe.com/thread/1623951?sr=stream

E Mail not working in PSE 12?

Hi, I have the trial version of 12. I set up the E Mail to the Adobe Mail Server. I do not use Outlook, but G Mail. I received a verification code, and put it in. it seemed to accept that. However, whenever I try to use Photo Mail or E mail attachment all I get is a small blue circle spinning. No E Mail going out.
I still have 10 on my desktop and the E Mail is working perfectly.
Any suggestions about my E Mail problem in 12 is appreciated.

Hi,
Yes, I do have version 12 (and 9,10 & 11) - I tend to have lots of testing versions so that I can see what others are talking about when they have problems.
Going from 10 to 12, at first I didn't like the new light backgrounds but I am now getting used to it. I think that the organizer has now better facilities providing you are using the tagging system. So far, the editor seems to be slightly better.
Orginally I wasn't going to upgrade from version 11 because I didn't see many benefits for me but I gave in after a while. The jump from 10 to 12 would probably be a good value.
Do you like version 12?
Now to be honest, I have changed over to Lightroom for organizing my images and only use the Elements Editor to do the processing that I can't do with Lightroom. I find that was much better for me once I had picked up the basics of Lightroom.
Brian

Picture import not working in PSE 7/8 and windows 7

Hello
I just updated to win 7 (64 bit) and now I can't get the picture import from my camera working correctly with PSE7. When I plug it in windows ask me how I like to import them and I chose elements but nothing happens. I had no problem with this in Vista before. I have tried the trial version of PSE 8 but I have the same problem with that. The only way I can import my pictures is by starting organizer and select import from there.
Thanks for any help!

On 64-bit Vista and XP, you can't use the Adobe Photo Downloader with Windows Autoplay:
http://kb2.adobe.com/cps/402/kb402507.html
It's likely that 64-bit Windows 7 has the same restrictions. A workaround is to download Windows Live Photo Gallery and use its downloader, which is pretty good. Then in PSE, use File > Watch Folders to automatically import photos from the folder hierarchy where you're downloading the photos.

People recognition is not working in PSE 12 Organizer

I've already done all the breezedat changes. Win 7.

Hi,
Yes, I do have version 12 (and 9,10 & 11) - I tend to have lots of testing versions so that I can see what others are talking about when they have problems.
Going from 10 to 12, at first I didn't like the new light backgrounds but I am now getting used to it. I think that the organizer has now better facilities providing you are using the tagging system. So far, the editor seems to be slightly better.
Orginally I wasn't going to upgrade from version 11 because I didn't see many benefits for me but I gave in after a while. The jump from 10 to 12 would probably be a good value.
Do you like version 12?
Now to be honest, I have changed over to Lightroom for organizing my images and only use the Elements Editor to do the processing that I can't do with Lightroom. I find that was much better for me once I had picked up the basics of Lightroom.
Brian

Clone, spot healing tool, content aware will not work on 11 or 12

The following tools will not work on PSE 11 or 12: clone, spot healing, content aware. Using 3 yr old iMac with latest OS. Same problem on Mac Book. I must be something wrong.

I'm not sure what was going on. I eneded up discarding the photo I was working on and open up another one and everything worked. I guess just a little hitch in it's gitty-up!
Thanks for your comments.

HT4108 I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?

I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?

If this is an iPad 1, it won't mirror, but it will still output video from the 30 Pin dock connector.
If your new TV has a conventional VGA in and stereo inputs you can try this connector.
http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a
I used to stream video from both Netflix and YouTube and from my Mac using iTunes sharing through my iPad then with this connector plug into my iPad and TV.
It won't be high resolution, but it will get you picture from iPad to TV.
Good Luck.

I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed. The serial # for 13 does not work. Any thoughts on how I can get a number for PSE 12?

I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed 12.
The serial # for 13 does not work. Any thoughts on how I can get a serial number for PSE 12?

Hi
There is a newer version of Resolution+ Plug-in released for an Qosmio X series
[Resolution+ Plug-in v 1.1.2004|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=381&selSeries=231&selProduct=7506&sel ShortMod=null&language=13&selOS=all&selType=400&ye arupload=&monthupload=&dayupload=&useDate=null&mod e=allMachines&search=&action=search&macId=&country =all&selectedLanguage=13&type=400&page=1&ID=82406& OSID=30&driverLanguage=42]
try it out...
If it has not been installed properly, try rebooting your computer and reverify.

My touchscreen is not working on my ipod 3rd generation.. any tips from any one....

my touchscreen is not working on my ipod 3rd generation.. any tips from any one....

To rule out a software problem
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If still a problem you have a hardware problem.

PSE 11 - MacOX 10.7.5 Printing Wide Format Printer and Profiles Not Working Correctly

Macosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again.   Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11.   Start it up again. Guess what first print is a mess again.   all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11.    Same thing..   first print a mess all others ok.
the issue can be replicated consistantly......
no problems with PSE10 or PSE9
any suggestions?????
cheers elo

Thank You for your suggestions.
I have been printing using PSE for over 14 years going back before the term PSE came up. I have done this professionally using profiles from others and those I generate myself..
All the things you mentioned have been done.
The main point missing in your suggestions is   It is only the first print every time I open up PSE11 that does not work...
at completion of print I immediately go back to the file command and say print and then bypass all settings and print again.   this time and every other print aafter are perfect...      I did not change one single setting...
I know about printer and adobe settings etc.     but thanks for going through the list it was a good reminder of how to remember everything sometimes we rush and forget something...
Finally    It works PSE6, PSE9, PSE10, CS5, Lightroom 4.   I think I have the settings right......
Any suggestions for how to get PSE11 to force the settings for the first print would be appreciated..
Only thing I have not done is upgrade to the latest version of the epson driver. Released less than a month ago to provide support for mountain lion.(iam only on lion) Maybe just maybe???   you never know.   Will try this when I finish by next batch of prints.
I will back up as I do weekly...    Still have the old driver from way back in release 10.5.8   will try to fire up to 10.5.8 and see what happens....
cheers elo
Message was edited by: Elo Laugesen

Spry tool tip does not work in template or child pages within an editable region. Why not?

Ok. so I am getting pretty frustrated. I take the time to learn how to use CSS and to create a template page for a Contractor Site (www.ContractorInsurance.net). The idea is to create a page that I can use for different classes of Contractors...right?
Then I get all happy about being able to insert ToolTip onto pages to help the user. Great!
LIfe to turn to Sorrow after nearly five hours of searching for a "eeking" answer.
So what good does it do to have an Editable region to update if we cannot have the flexibility to insert a tool tip on child pages? Ok so the fast solution is to what... Have a question mark image, insert another apDiv, name it toolTip_Not and provide it with a show=hide behavior?
RRRRRrrr...
This really sucks not being able to find a solution within a reasonable amount of time.

I have tried thank you. However...it is still not working.
www.ContractorInsurance.net/course_of_construction.php
The error message is "Making this change would require code that is locked by a template translator"
Re: Spry tool tip does not work in template or child pages within an editable region. Why not?
created by altruistic gramps in Spry Framework for Ajax - View the full discussion
If you have a look at the following simple document with a tooltipTooltip trigger goes here.
Tooltip content goes here.
you will notice that a couple of lines have been placed in the HEAD section of the document. When using DW templates, the HEAD section is usually not editable, hence the error mesaage. By default, your template should have an editable region in it just before the closing tag. It looks like this:  Dreamweaver should be able to find that editable region and insert the
<script> tag there automatically. Because you don't have an editable region like that in the <head>, open the master template, and paste the code above just before the closing </head>
tag. Gramps
Edited to remove personal data

TS3367 I cannot get my iPhone 4S to connect to iMessage n FaceTime have tried all the tips online and it's still not working ? It's just saying waiting for activation

I cannot get my iPhone 4S to connect to iMessage n FaceTime have tried all the tips online and it's still not working ? It's just saying waiting for activation

What tips have you tried so far? Just so we don't waste our time telling you things you've already done.
When you respond, also indicate which country and carrier you're using. Also, is your phone brand new? can you make a phone call / access the internet while on cellular?

PSE 8 - Photomerge Panorama not working?

Trial version (is Panorama disabled in trial?), XP, default preferences
File->New->Photomerge Panorama and select either 2 open files or 2 files off disk. Tried Auto reposition, manual , and in both cases, the program thinks for a couple seconds and then shows me an empty file on screen (checkerboard) entitled Untitled_Panorama1.
Tried a series of different photos, and have done this before in PSE7 with no trouble, so this is puzzling.
Is this a bug?

John, I want to add some other information for you concenring this problem with Photomerge Panorama in PSE 8 that you have been looking into, as I too get the error message you detailed in your earlier comments on this problem. I tried your solution (saving for the web) and found that it did work but, of course, it is a pain having to do this workaround. Then, quite by chance I found that Photomerge Panorama was working correctly and so I tried several files, some of which had not worked before!
Tonight, the old problem returned and I have been able to replicate both the problem and the solution. If I have the Organiser open (which I must) but not the Editor, then it works fine. If I then try to do another panorama with new files, then it usually throws up the error message and fails to work. Any further attempts with the image files (or previous ones that have worked) also fail, ending with the error message. However, if I close the application completely, and then reopen it, the same files will work perfectly with Photomerge Panorama.
Maybe this throws some new light on the cause for you? (and hopefully Adobe if they read this posting). Is it a memory problem? (I have 1 GB of RAM)
It is certainly very odd.
On another matter, but kind of memory/processor related, although I doubt if you will remember this, but last year when PSE 7 was announced but before it was available, I queried the processor spec moving up to requiring a 2GHz processor (it was a huge leap in spec from previously required processors and also not a size much then available for PC Notebook users!
You kindly advised that you thought it was more a case of "sloppy marketing" which seemed to be borne out by some later advice that I received and sent you and others from Adobe Technical suppoort. Recently, when I saw that PSE 8 required a 1.6 GHz or faster processor (the website spec sheet) I was pleased and thoughtful! Today, my purchased copy of PSE8 arrived. (I have been using a free trial version). Guess what, on the box the processor specification is "2 GHz or faster" So now we have either another case of "sloppy marketing" or perhaps, it DOES need 2 GHz and maybe this is the problem/part of the problem with Photomerge Panaroma not functioning correctly/consistently?
Maybe though, it IS just a bug and one that I really hope that Adobe can address and rectify AND thsat we don't have to wait until PSE 9. That would be very, very poor.
How do you report bugs/possible bugs to Adobe or will you further report the issue, assuming that you can replicate what I have found with Photomerge Panorama?
Hope this posting is helpful to you and others experiencing this problem with PSE 8
Kind regards

I have been using Adobe Photoshop Elements on an older Mac...just bought Mac Mini and migrated all my files...but 4.0 Does not work....can I upgrade PSE 4.0 to PSE 13?

I have been using Adobe Photoshop Elements on an older Mac...just bought Mac Mini and migrated all my files...but 4.0 Does not work....can I upgrade PSE 4.0 to PSE 13?

Yes, any version of PSE qualifies for upgrade pricing, but if you're in the US you might want to consider running the trial for now and waiting for the black friday specials, when the full version will be a lot less than the adobe upgrade price.

"Tips" not working in PSE 8.0

Similar Messages

Maybe you are looking for