Tips on having an image behind a window

hi all,
I'm making a room and on the far wall there is a window. through the window i want an image to show outside.
I'm having trouble getting the distances right so that when i pan the camera around, the image through the window moves with respect to the window and wall looks convincing.
any tips?
the current z distances are:
camera -900
wall 2500
so where should the outside be to look convincing?
cheers
also when i have a few kfs for the camera pos and pov the movement seems awkward. any idea on what kf interpolation i could use to smooth out the camera? whatever i've tried has strange 'bounces' in, a kind of wobble on kfs. linear looks to linear.
cheers

I'm not really sure why and where you are experiencing the problems. If the keyframes "bounce", then their interpolation isn't right. I know, doesn't exactly help. Have you considered that temporal and spatial interpolation are treated separately in AE? Maybe you only adjusted on, but not the other. As for your other issue - parallax movement is more of an angular matter, so very likely you will have to increase your distances considerably. Too short distances will make everything move very fast and accentuate any "bumps". Using extremely large Z-separation serves the case better. I also recommend, you look into other options to map your background. A very large CC Sphere, Trapcode Horizon or CC Environment (in the commercial Cycore FX HD package, not included with AE) will take some burden off your shoulder in that regard.
Mylenium

Similar Messages

How can i perform system image recovery in windows 8.1 hp pavilion g6

recently i upgrade my hp pavilion g6 to 8.1pro..i need to create an system image file of my windows 8.1..so plz give me a detailed procedure...to store it on dvds/online hp backup recovery...
Is this image recovery working properly when my system got in big trouble???

When requesting assistance, please provide the complete model name and product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of the computer, inside the battery compartment, or on the BIOS startup/setup screen. Please do not include the serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
Please use Windows "System Image Backup" utility to create an exact image of the Windows 8.1 partition as it currently is, on an external hard drive. You may also need to create a Windows "repair" disc. If your computer developes issues or you need to replace the hard drive, all you have to do is "restore" the image to the computer. Please see Windows 8.1 Tip: Use System Image Backup for instructions on creating and restoring a "Windows - System Image Backup."
This process is not a system recovery and is different than using Window Restore or Refresh, or HP System Recovery.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Image Rady unter Windows 2000

Hi!
Ich benutze Imageready 3.0 und Photoshop 6.0 unter Windows 2000 Pro und Windows ME.
Unter Windows ME gibt es auch keine Probleme allerdings unter Windows 2000. Hier sieht es so auch: Wenn ich Photoshop 6 verwende gibt es eine gute Reaktionszeit des Programmes. Allerdings Wenn ich jetzt zu Image Rady springe ist die Performance auch noch in Ordnung. Doch so bald ich in Image Rady oder in Photoshop Änderungen am Bild vornehme, wird die Reaktionszeit in Image Rady sehr viel langsamer - so 5 - 10 Sekunden bis der Rechner auf Mausklicks reagiert. Die Resorcen im Tastmanager sind mehr als ausreichend. Dieses Systemverlangsamen tritt allerdings nur in Image Rady auf. Selbst wenn Image Rady langsam reagiert, arbeiten alle anderen Programme - auch Photoshop weiterhin mit normaler Geschwindigkeit.
Hat jemand ähnliche Erfahrungen gemacht? Und wichtiger: Weiß jemand, was ich da tun kann
außer das ich einfach in Windows ME arbeite?
Vielen Dank schon jetzt
Stefan Ketteler

Ja, Ich hab Norton Antivirus 2001 installiert. Sowohl im System mit Windows
ME als auch in Windows 2000 Pro.
Und - wie gesagt, mit Windows ME - gibt keinerlei Probleme. Aber vielleicht
hast Du noch einen Tip?
Schönen Dank schon mal fürs lesen!
Stefan
-----Ursprüngliche Nachricht-----
Von: colortour [mailto:[email protected]]
X-Phorum-Thread: 47
X-Phorum-Parent: 48
Gesendet: Sonntag, 18. Februar 2001 23:00
An: [email protected]
Betreff: [community-Dev Corner] Re: Image Rady unter Windows 2000 [7:47:48]
Hallo Stefan Ketteler,
hast Du auf deinem Rechner Norton Antivirus installiert?
Jochen Günther
Training & Consulting
Telefon: +49-89-98 29 12 20
Fax: +49-89-98 29 12 21
E-Mail: mailto:[email protected]
Internet: http://www.colortour.de

Spaces - New Window opens behind existing window

I have an annoying situation - I love Spaces - but it has a New Window characteristic that drives me nuts.
For example, if I click a website link in email or other application, the linked window will almost always open behind a window that I'll already have open in Safari.
Or if I double click an image in Finder, it will open behind open windows in Photoshop or Freehand.
It would be great if these new windows would open in front!! Any suggestions? I can't find any settings to change this.

Hi,
To resolve this issue, modify the value of the ForegroundLockTimeout registry entry in Registry Editor. To do this, follow these steps:
===============
Important This section, method, or task contains steps that tell you how to modify the registry. However,
serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs.
1.
Click Start
, click Run , type regedit in the Open
box, and then click OK .
2.
In Registry Editor, locate and then click the following registry subkey:
HKEY_CURRENT_USER\Control Panel\Desktop
3.
In the right pane, locate and then double-click
ForegroundLockTimeout .
4.
Under Base , click
Decimal , type 0 in the Value data
box, and then click OK .
Note The default decimal value for the ForegroundLockTimeout registry entry is set as
200000 .
5.
Quit Registry Editor.
6.
Restart your computer.
Best Regards,
Sally Tang

Deleting an image backup in Windows 8.1

How to safely delete an image backup under Windows 8.1 to free up disk space?

if your concern regarding disk space, rather than deleting image backup, you still can do this
http://windows.microsoft.com/en-us/windows-8/free-up-disk-space
but you can delete Windows Image Backup folder manually, only UAC prompt will be pop up
you can read the whole document regarding your concern here
http://www.eightforums.com/tutorials/8956-system-image-create-windows-8-a.html

[Forum FAQ] Schedule multiple versions of System Image Backup in Windows 8.1

As we known that there is no UI for user to configure Image backup in Windows 8.1, this is a guide for your to schedule multiple versions of System Image Backup.
Step 1: Create a task to schedule an image backup with following command:
SCHTASKS /Create /SC WEEKLY /D MON /TN WeeklyFullBackup /RL HIGHEST /ST 13:00 /TR “wbAdmin Start Backup -backupTarget:F: -include:C: -allCritical -quiet”
Step 2: Schedule a robocopy to backup the saved image with BAT file:
Please create a new folder (in this example, the new folder is e:\test2) to save your multiple copies of image backup:
Write following batch file to copy backup and rename with backup date:
*****************BAT********************
@echo off
robocopy e:\test1\ e:\test2\ test.wim
ren e:\test2\test.wim test_%date:~10,4%%date:~7,2%%date:~4,2%_%time:~0,2%%time:~3,2%.wim
NOTE: e:\test2 is my location to save multiple copies of image backup; e:\test1 is the location I create the system image backup.
This BAT can also help to rename the copy of image backup with date and time like below:
3. Set up a basic task in Task schedule:
Note: please make sure the time you configured follows the time you set for image backup in Step 1.
Action -> Create basic task (Name you task) -> Trigger (Set how often this task should be run) -> Action (Start a program) -> Under Program/script, point to your bat file you create in Step 2.b -> Finish
At the end, you can know more about SCHTASKS and Robocopy via following links:
Robocopy
http://technet.microsoft.com/en-us/library/cc733145.aspx
Schtasks
http://technet.microsoft.com/en-us/library/cc725744.aspx
Welcome to your feedbacks.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
Thanks for posting in Microsoft TechNet forums.
I will try to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Regards,
Kelvin Xu
TechNet Community Support

System Image Backup in windows 8.1 not working

Hi,
I am trying to take system image backup on windows 8.1 with USB drive attached and I am getting the following error which is given at the end of the post. It always says the backup location is invalid.When I tried with -allCritical it fails with
I tried to wbadmin enable backup, that also fails with "Warning: The ENABLE BACKUP command is not supported in this version of Windows. The operation ended before completion."
Can someone help with the wbadmin backup, please. It seems to be a red-herring.
PS C:\WINDOWS\system32> wbadmin start backup -backupTarget:E: -include:c:
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2013 Microsoft Corporation. All rights reserved.
Retrieving volume information...
This will back up OS(C:) to E:.
Do you want to start the backup operation?
[Y] Yes [N] No Y
ERROR - The specified backup location could not be found or is not a
supported backup storage location.
PS C:\WINDOWS\system32> wbadmin start backup -backupTarget:E: -include:c: -allCritical -quiet
wbadmin 1.0 - Backup command-line tool
(C) Copyright 2013 Microsoft Corporation. All rights reserved.
Retrieving volume information...
This will back up ESP(EFI System Partition) (500.00 MB),OS(C:),(\\?\Volume{26a2e53d-6299-4ef1-a7e7-860f1e839ed6}\) to E:.
ERROR - The specified backup location could not be found or is not a
supported backup storage location.

Hi,
Thanks for posting in Microsoft TechNet forums.
I will try to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Regards,
Kelvin Xu
TechNet Community Support

Images Behind Text in RTF Template

While creating a few rtf templates, I noticed that if an image is to be shown behind text then the image will not render to back to .rtf by bi pub.
If I put the image inline with text, it renders just fine.
Am I missing a step that would allow me to render the image behind text or is it just working as intended?
Oracle BI Publisher 10.1.3.4.1
Thank you.
Edited by: Crawler409 on Dec 17, 2010 2:49 PM
Edited by: Crawler409 on Dec 17, 2010 2:50 PM

Hi
Can you pl. send me the RTF template and sample XML. I will try to fix the template.
Thx
chundi ([email protected])

I have OPTED OUT of hot deals (and 2 others, the third will not let me its behind its window) and it will not turn off - how do I turn it off forever?

You have an opt out option.
THIS opt out option has a forever option.
IT DOES NOT WORK.
I have opted out forever on the stupid )(&**%^*&()*^ tab that occurs in the MIDDLE OF MY SCREEN, covering a THIRD of my screen (and at 62cm - this is over kill!) .... FAIL. (at least 4 times)
I have opte dout forever on the stupid tab on the RIGHT side of my screen......FAIL.(at least 8 times)
I am unable to opt out forever on the tab that appears on the bottom of my screen, as the opt out options appears BEHIND the window I wish to opt out forever of. (I call this EPIC fail.)
When I am reading a story on line, I DO NOT WANT TO SHOP. If I am shopping in Amazon for a book, I will be reading about that book. IT IS ANNOYING TO HAVE TO CLOSE OUT WINDOWS EVERY TIME I SEARCH FOR A NEW BOOK - consider that I search/buy around 15 books at a time - after checking out maybe 50 that these tabs open over the TOP of.
I also wish to get rid of the underlines with the green circle-thingy arrows that open pop up windows if I mouse over them. (there are 3 of them under this box I am typing in as I type, and nudging the mouse out of the way has opened up at least 4 stupid pop up windows - which I have blocked pop ups in the options...so WHY???????)
I realise this can not be fixed on the spot, as it is going to require an actual programmer to fix it but please, pass this up to or over to whoever CAN fix it. I have used firefox since before patch 4 after it went live. I ADORED the old "you are F****d (etc" page you used to have that was directly opposed to internet explorers page not found - and I actually took the time to read it and had a terrible time stopping the laughter (at work of all places) when I did. I do not want to change browser, but these *features* do not enthrall me - especially since *features* should be optional, and turning them off should work.
Thank you for your help, and I hope you have a great day/night and no more horribly painful people like me. <3 x o

thankyou. THANK you.
thankyouthankyouthankyou!
sorry about no screenie but the first option worked (at least so far!)
THANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOU

How do I view multiple images in one window?

How do I view multiple images in one window? I want to compare images side by side, not in tabs.

Thank you, Barbara. I found that I had to close the program after I turned on "allow floating documents" and restart, before I was able to go to "float all in windows".

I haveing problem installing itunes on Windows 7. Erorr masage is "There is a problem with this Windows installer package. A program reguired for this install to comlet coudnt be run. Contact your support personnel or package vendor."

Hello,
I haveing problem installing itunes on Windows 7. Erorr masage is "There is a problem with this Windows installer package. A program reguired for this install to comlet coudnt be run. Contact your support personnel or package vendor."
Please heLp.
Thank you.

Repair your Apple Sofyware update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install

How to use radioButton(s) and image controls on windows phone 8.1

how to use radioButton(s) and image controls on windows phone 8.1

Hi aspirantme,
>>how to use radioButton(s) and image controls on windows phone 8.1
Which version of your app is? Runtime or Silverlight?
For Runtime version, please see the following articles:
#RadioButton class
https://msdn.microsoft.com/en-us/library/windows/apps/windows.ui.xaml.controls.radiobutton(v=win.10).aspx
#How to add radio buttons (XAML)
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh868200.aspx
#Image class
https://msdn.microsoft.com/library/windows/apps/br242752.aspx
For Silverlight version, please refer to the following documents and guidelines:
#RadioButton Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.radiobutton(v=vs.105).aspx
#RadioButton control design guidelines for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/hh202881(v=vs.105).aspx
#Image Class
https://msdn.microsoft.com/en-us/library/windows/apps/system.windows.controls.image(v=vs.105).aspx
#Quickstart: Images for Windows Phone
https://msdn.microsoft.com/en-us/library/windows/apps/jj206957(v=vs.105).aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to read ZIP files(having PDFs,Image) using MQ Series link for R/3

Hi,
1)Is it possible to transfer a zip file (having an image or pdf) using IDocs in SAP 4.6C using MQ Series link for R/?
Scenario: "MQ Series link for R/3" converts Business-Reports from a third-party software,into SAP IDocs.Each Business-Report contains one XML file and one ZIP file.
2)Being on ABAP side,do I have to worry about how the zip file would be converted into IDocs?
Detailed descrption:
This scenario requires integration of a non-SAP software which talks in XML with SAP R/3(4.6C).The customer has decided to go with 'MQ Series link for R/3' (which integrates any non-SAP application running on IBM MQ Series to R/3,by converting data(in any format) into IDocs).He is not ready to go for XI.
The Problem area is a functionality which requires the non-SAP software to send XML file along with an attached Zip file.So,XML document,basically,has a 'zippedFile' XML element having actual file in XML keyword 'file'.
This XML document ideally, should be converted by the subsystem(MQSeries link for R/3) into IDocs i.e. into a stream which could be stored in a table on R/3 side and later, sent back to the non-SAP software through MQ Series link to be converted into zip-file again with corresponding pdfs,images.I want someone who has worked in a similar scenario to confirm this.

Hi,
I have a feeling I have posted this question in the wrong forum or maybe I will let you decide this.Any help would be appreciated (even the right forum name).
My scenario requires integration of a non-SAP software which talks in XML with SAP R/3(4.6C).The customer has decided to go with 'MQ Series link for R/3' (which integrates any non-SAP application running on IBM MQ Series to R/3,by converting data(in any format) into IDocs).He is not ready to go for XI.
The Problem area is a functionality which requires the non-SAP software to send XML file along with an attached Zip file.So,XML document,basically,has a 'zippedFile' XML element having actual file in XML keyword 'file'.
This XML document ideally, should be converted by the subsystem(MQSeries link for R/3) into IDocs i.e. into a stream which could be stored in a table on R/3 side and later, sent back to the non-SAP software through MQ Series link to be converted into zip-file again with corresponding pdfs,images.I wanted someone who has worked in a similar scenario to confirm this.

How to display an image in a window ?

Hi all,
Could someone point me to a document that explains (preferably with code samples) how I go about displaying a JPEG image in a window.
What I'm eventually trying to create is a slideshow, but for now, I just want to add an image to a JFrame and have that display, and even this simple first step is beyond me. There seem to be quite a few different classes to deal with images, but I'm just looking for the simplest one.
With a view to my future requirements, I will want to be able to dynamically shrink an image so that it fits in the window, as well as cropping images so that the full resolution is displayed, but anything that doesn't fit in the window is chopped off.

hi,
how to place an image in the cells of a grid and to drag and drop that image. i have the code to locate the postion of each cell on mouse click. now i want to place an image in particular cell and i want to drag and drop that particular image to other cells of grid.
is it possible.
pls give me a suggestion.
here my code:
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import javax.swing.*;
public class Grid
public Grid()
GridPanel gridPanel = new GridPanel();
CellSelector cellSelector = new CellSelector(gridPanel);
gridPanel.addMouseListener(cellSelector);
JFrame f = new JFrame();
//ImageIcon ii= create ImageIcon("C:/Documents and Settings/sreehari.m/Desktop/new/java //pgm/new");
//cellSelector.addImageIcon();
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.getContentPane().add(gridPanel);
f.setSize(400,400);
f.setLocation(200,200);
f.setVisible(true);
public static void main(String[] args)
new Grid();
class GridPanel extends JPanel
double xInc, yInc;
final int
GRID_SIZE = 4,
DRAW = 0,
FILL = 1,
PAD = 20;
int[][] cells;
public GridPanel()
initCells();
protected void paintComponent(Graphics g)
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
double w = getWidth();
double h = getHeight();
xInc = (w - 2*PAD)/GRID_SIZE;
yInc = (h - 2*PAD)/GRID_SIZE;
// row lines
double x1 = PAD, y1 = PAD, x2 = w - PAD, y2 = h - PAD;
for(int j = 0; j <= GRID_SIZE; j++)
g2.draw(new Line2D.Double(x1, y1, x2, y1));
y1 += yInc;
// col lines
y1 = PAD;
for(int j = 0; j <= GRID_SIZE; j++)
g2.draw(new Line2D.Double(x1, y1, x1, y2));
x1 += xInc;
// fill cells
g2.setPaint(Color.red);
for(int row = 0; row < cells.length; row++)
for(int col = 0; col < cells[0].length; col++)
if(cells[row][col] == FILL)
x1 = PAD + col * xInc + 1;
y1 = PAD + row * yInc + 1;
g2.drawString("("+row+","+col+")" , (int) x1+50, (int)y1+50);
//g2.drawString("("+Grid("+row+","+col+")+")" , (int) x1+50, (int)y1+50);
// g2.drawString("("")" , (int) x1+50, (int)y1+50);
// g2.fill(new Rectangle2D.Double(x1, y1, xInc - 1, yInc - 1));
public void toggleCellColor(int row, int col)
int mode = DRAW;
if(cells[row][col] == DRAW)
mode = FILL;
cells[row][col] = mode;
repaint();
private void initCells()
cells = new int[GRID_SIZE][GRID_SIZE];
for(int row = 0; row < cells.length; row++)
for(int col = 0; col < cells[0].length; col++)
cells[row][col] = DRAW;
class CellSelector extends MouseAdapter
GridPanel gridPanel;
public CellSelector(GridPanel gp)
gridPanel = gp;
public void mousePressed(MouseEvent e)
Point p = e.getPoint();
int col = 0, row = 0;
double x = gridPanel.PAD + gridPanel.xInc;
// find column
for(int j = 0; j < gridPanel.GRID_SIZE; j++)
if(p.x < x)
col = j;
break;
x += gridPanel.xInc;
// find row
double y = gridPanel.PAD + gridPanel.yInc;
for(int j = 0; j < gridPanel.GRID_SIZE; j++)
if(p.y < y)
row = j;
break;
y += gridPanel.yInc;
gridPanel.toggleCellColor(row, col);
}

Having problems installing iTunes on Windows XP

Having problems installing iTunes on Windows XP - Error msg "There is a problem with Windows Installer Pkg. A program required for this install to complete could not be run. " However, it's an iTunes error msg.

The installation fails at the last possible moment each time.
are you getting an error message, dave? if so, what does it say? include error message numbers if you're getting any.

Tips on having an image behind a window

Similar Messages

Maybe you are looking for