Tips to speed up my imac

recently I installed more RAM, up from 1GB to 3GB.
I frequently work in photoshop, indesign, and other apps at the same time, same project so I'll have other apps open, including internet browsing.
i've still noticed i get the pinwheel alot more than i would like.
I checked the Activity Monitor. At the time I had some free space, and I think 3mb page outs.
it's an iMac6,1. I believe i got it in 2007. I'd like to get a few more years before upgrading.
I have Snow Leopard operating system. version 10.6.8. I do all the updates.
should I go up to 4GB RAM? are there settings that I can check that will increase my computers speed? I try not to have apps running that I'm not using.
will getting rid of software I don't use help with speed? will storing files to dropbox help with speed?
thanks.
kathy

There is not much you can do at this point.
Your model iMac maxes out at 3 GBs.
You simply haven't got enough physical RAM to run OS X and all of the apps you have running simultaneously.
OS X, by itself, can use up between 2-4 GBs of RAM. You only have 3 GBs of RAM. So, already that puts your iMac at a disadvantage as it doesn't leave very much RAM to run other applications.
Also, if you are starting to get low on hard drive space (25 GBs or less), this can cause slowdowns with your iMac,too!
It maybe time to consider getting an external hard drive to store your important data to locally. Do not just rely on Cloud services to store your important data. You should have some sort of secure, local storage for your data.
Then you can delete some of this data off of your internal drive, freeing up additional hard drive space.

Similar Messages

PLease advise on increasing the speed of my iMac 2008. It is running slowly and accesses the HDD a lot. Perhaps re-installation? Thanks.

I need to increase the speed of my iMac late 2008 (3.06GHz Intel Core 2 Duo). It has 4G of DDR2 SDRAM and a 500G HDD.
I back this up regularly with time machine.
If a fresh installation is advised, how do I do this?
Thanks

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

The speed of my iMac slow only 2 weeks old why?

the speed of my iMac slow only 2 weeks old why?

In addition to abrody's questions, have you downloaded non-Apple software that may be automatically loading, and perhaps not Lion-compatible? Go to System Preferences, users, and look at login items under your user ID. This is easy to check ... do a safe boot by holding the shift key down when you boot. The boot itself may take longer than normal, but once the boot finishes, if the performance is what you'd consider normal, look to your login items. Also, while looking at System Preferences, look at any programs noted at the bottom of the window.

Quick Tips For Speed Your Digital Publishing WorkFlow

I think that we have a great problem with our Digital Publishing Workflow's speed . I talk about, for example, of set up State Objets Sliedshows for multiple page, and I mean, there are another similar examples about that. Do you know if does exist more tips for speed our workflow in InDesign for Digital Publishing Output?
Thanks a lot!
Sorry for my bad english.
Bye!
Marco Toscano

Muito abrigado my friend! Seriously thanks a million, but I was curious to know about my situation regarding replacing my first shot multiple times... In another words there's a clip already in the storyline which won't allow me to replace edit since it just moves out of the way. Would you just go back into the browser and add the original selection to the first clip? Because I kept having to move my connected music and solid I just gave up and would wait until the end to add the music and solid (I add the solid to give the background a different color when I want to create the letterbox effect).
I just watched a music video tutorial where someone created a 3 minute solid, made like a hundred cuts with the blade tool and manually dragged each clip from his browser to replace from start for each of those cuts in the solid...
What is your workflow for music-based edits? Do you place the song in the primary story line and use the video as connected clips? Do you use a solid or gap clip and dissect it with cuts and replace the segments with clips? I really hate not being able to add markers to the timeline and must make those marks on a clip/generator/music track of some kind. Also if you have a project that has the same settings with fps, crop size, solid as a background is there a way to make template so I don't have to do that each and every time?
Thanks again my friend!!!
Anthony

How do increase speed on my iMac or clean up?

How do increase speed on my iMac or clean up?

Providing some more details will allow better answers to your question:
How old is this iMac? (e.g. Early 2008, Late 2012, etc.)
What Mac OS is it running? (Snow Leopard, Lion, Mountain Lion?)
How much RAM memory is installed?
What is your hard drive size, and how much free space is remaining on it?
Are you running any anti-virus software or "crapware" like MacKeeper?
Is this "slowness" evident all the time, or only during certain applications or processes?
Have you tried going to Applicatons --> Utilities --> Disk Utility and running Repair Permissions?

How can I give more speed to the Imac working with yosemite

Hello!
I just upgraded my software to yosemite and everything works fine except that the system has become much slower in general. as you can give more speed work to Imac in Yosemite?
Thnks

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

INternet speed difference between iMac and MBP

I have an imac 27" that is barely one year old and a three year old MBP. Today, I signed up for faster Fios internet service which is supposed to be a maximum of 25 Mbs both up and down. I then checked the speed on my iMac and see I am averaging about 10 Mbs down and about 8 Mbs up. I am not that concerned that I am not getting the theoretical maximum performance. For one thing I am not hardwired to my router but am using wireless g. I also ran the Mac internet tuner that seemed to actually increase the speed somewhat.
I then checked my MBP that is sitting right next to my iMac. I am getting around 15 Mbps down and about 17 Mbps up. I repeated this several times as I did for the iMac. I am surprised at the iMac being so much slower (about 33% slower). I can only assume the hardware in the MBP is better for wireless communication than in the iMac. Can someone explain why this is so?
thanks,
Shannon

Download an app such as Speedtest to your iPad. Test both ways and see the results for yourself.

Fans running at full speed and slow iMac

I have a 2009 iMac that's used every day.
More and more frequently, the fans decide to go up to full speed. I've also noted my iMac is struggling somewhat this past year with standard tasks like iPhoto and iTunes. It even crashed yesterday when adding name tags to iPhoto.
After a reset the fans slowley go back to normal running speed.
I'm all backed-up in two separate locations, (JIC).
Any pointers on what I can look at?
Thanks
Ollie

Ollie ...
Your profile indicates your Mac has v10.5.7 installed. That's an outdated version of Leopard.
Click Software Update from your () menu top left in your screen.
Or, install the Mac OS X 10.5.8 Combo Update
Either way, restart your Mac after the updates are installed.
And how much free space on the startup disk?
Control click the MacintoshHD icon on your desktop then click Get Info.
You'll see Capacity & Available in the Get Info panel. Make sure there's at least 15% free disk space.
Run Disk Utility to verify and if necessary, repair the startup disk.
Launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click Verify Disk (not Verify Disk Permisions)
If repairs are necessary, help here > Using Disk Utility to verify or repair disks
More tips here > Mac troubleshooting: What to do when your computer is too slow | Macworld

What can I do to improve the processing speed of my iMac?

Hello Apple Community,
I have iMac - The 2.93 GHz processor, 4 Gigs of memory version and I'm having some processing problems. About six month ago my iMac started randomly doing the "Holy-Crap-I'm-going-to-start-processing-stuff-and-I'm-not-going-to-tell-you-wh at-it-is" sounds. You know, the excessive microclicking from the processing ongoings behind the screen. Well, six months ago, these events were pretty unpredictable, didn't last verylong, and had a rather large time interval between occurrances (like a week or two). However, this is now happening most every day and since I've never had this bad of an issue before, I was hoping someone on the forums could help.
I've run Disk Utility (probably more often than I should) and I've cleared out some HD space (under the assumption that when you have more disk space, you computer runs faster). But the problem persists. I am rather weary of any outside utility programs (Once I downloaded one from "recommended programs" pages on the apple website and it completely killed my MacBook's HD). I reallly have no idea where to go next... Should I empty out more disk space? Should I install more RAM? I bought this machine recently (within the last 2 years) and I really don't want to solution to my problem to be "you need to buy another computer." I fear the sounds that my comptuer is making are cries of pain from the CPU's dying breath and I would really appreciate any assistance in prolonging the livelihood of my poor iMac.
Cheers,
Chris

About OS X Memory Management and Usage
Reading system memory usage in Activity Monitor
Memory Management in Mac OS X
Performance Guidelines- Memory Management in Mac OS X
A detailed look at memory usage in OS X
Understanding top output in the Terminal
The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
Adding RAM only makes it possible to run more programs concurrently. It doesn't speed up the computer nor make games run faster. What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent. It will improve the performance of applications that run mostly in RAM or when loading programs.
The above information is more meaningful than relying on what is provided by Activity Monitor. The amount of Free RAM is not some set number below which you need more RAM. Total available RAM is the sum of Free and Inactive RAM, so Free RAM by itself may be misleading. When you truly need more RAM is when the system starts relying on virtual memory from the HDD.
I don't mean to start an argument with Roger, but relying on Free RAM by itself is an oversimplification of the situation.

Memory/Speed early 2009 IMac

I have an IMac (20 inch early 2009) With 2 GB 1067 MHz DDR3 memory and after updating to Yosemite 10.10.1 it has slowed down. I was wondering if increasing the memory would help speed things up?

I think upgrading RAM could help its performance. You can upgrade till 8GB(two 4GB DDR3 1066MHz SO-DIMM).

Hi, I bought an imac 27" quad-core i5 with 1067Mhz DDR3 RAM in it. I would like to know if this is the right type of speed for my imac as I found out that these imacs come standard with 1333Mhz DDR3's? It is crashing a lot!

Hi all. I bought an imac 27", 3.1Ghz quad-core i5 Mid 2011 last year in 2012. The machine has been crashing ever so frequently. I upgraded the RAM from the 4Gb it came with to 12Gb. It still crashes! I recently noticed that my imac came with 1067Mhz DDR3 memory chips ( slower speed) than the Apple mac recommended 1333Mhz DDR3 memory chips.
The shop I bought it from ( Incredible Connection, Woodmead, South Africa) are refusing to own up as they are saying the 1333Mhz chips have to be ordered in advance. Surely they are supposed to sell the product with the right kind of Ram in it? Not for me to find out? Now I have to fork out more money to make my imac factory standard? Maybe I am wrong, But do these Mid 2011's run well on 1067Mhz memory chips if I upgrade to 32Gb? Is it possible people are swapping 1333Mhz chips from new machines with 1067Mhz chips which are way too cheaper? My system version( SMC Number) is 1.72f5
Baffled!

Mac and Mac models are picky about the RAM the Mac needs to see and use.
As you have found out, the 1067 speed RAM will not work in your year and model iMac.
You need the 1333 speed RAM.
If, you can return the RAM for a refund, do it!
If not, try online Mac RAM source and seller Crucial memory. They have a table that matches your Mac to the correct and reliable RAM. You may need to contact them to see whether or not they ship to South Africa, though.
If Crucial dpesn't work out, here's the specs for your year and model iMac that you need to seek out and purchase.
Maximum Memory
32 GB (Actual) 16 GB (Apple)
Memory Slots
4 - 204-pin PC3-10600 (1333 MHz) DDR3 SO-DIMM
Good Luck!

Does backing up my hard drive to time machine gain me more space/speed on my iMac?

I have an iMac. here are the specs:
Hardware Overview:
Model Name:    iMac
Model Identifier:    iMac8,1
Processor Name:    Intel Core 2 Duo
Processor Speed:    2.8 GHz
Number Of Processors:    1
Total Number Of Cores:    2
L2 Cache:    6 MB
Memory:    4 GB
Bus Speed:    1.07 GHz
Boot ROM Version:    IM81.00C1.B00
SMC Version (system):    1.30f1
Serial Number (system):    QP921090ZE4
Hardware UUID:    20AE2D9A-DB71-54DF-95F7-DAEFEE167723
I have a TON of art/photos on this computer. I'm wondering if backing my hard drive up with time machine gains me more space and processing speed-or if it only slows my computer down? is it better to house my files on a seperate drive from the drive i am using for backing up with time machine?

Just to add a little, Time Machine is not a storage drive. Backups on there are not in a form you can use as you would from your normal internal. If you delete your pics etc. after backup, they won't be backed up on subsequent runs, and will eventually be lost when the TM drive gets near full and starts deleting the oldest backups. Have a read of Pondini's TM articles; http://pondini.org/TM/Home.html
To do what you want, you need another drive to which you can simply copy your pics etc and open from there while booted to your internal. (this is a basic storage drive)
The storage drive can then also be backed up to TM (provided the TM disc is big enough).

What can I do to speed up my IMAC?

My IMAC has slowed down considerably lthe past few months, especially when I'm on the internet. I am on fixed income so am trying to figure out the best way to deal with it. I do a lot of music applications since I'm a composer, which I understand if on a PC, cause hundreds of extra "keys" and pathways" that clog processors; I do not know what happens on a MAC. I've had to quit the internet recently to avoid file crashes during music projects.
My system is as follows:
Model Name:          iMac
Model Identifier:          iMac8,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          1 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          IM81.00C1.B00
SMC Version (system):          1.29f1
Serial Number (system):          W88XXXXXXE2
Hardware UUID:          A0B15F7C-EB6E-54A0-98FB-80DDD4B03C83
Memory at 10 items 165.97GB available. What does this mean?
I want to add an external hard drive to save my work, and plan to use Time Machine; I do have Firewire. However since my system is a 10.5.8, will everything still work after I upgrade the operating systems, and is there a best way to do that? I want to start with the right external hard drive.
I would love some step by step guidance, and REALLY appreciate it in advance. Thanks.

You can upgrade your iMac's memory to as much as 6 GB. I recommend you get all you can afford. The 1 GB you have is not an abundant amount.
Purchase memory from Crucial or OWC / MacSales. Memory from other sources has been known to be unreliable. Installing it yourself is simple.
I want to add an external hard drive to save my work, and plan to use Time Machine; I do have Firewire. However since my system is a 10.5.8, will everything still work after I upgrade the operating systems, and is there a best way to do that? I want to start with the right external hard drive.
That's a good idea. All you need to do to make Time Machine work is to purchase an external hard disk drive and plug it in. Time Machine pretty much does the rest.
FireWire is preferable but USB is OK. Find an external hard disk of at least twice the capacity as your existing internal hard disk. OWC sells a large variety of external HDs.
Memory at 10 items 165.97GB available. What does this mean?
That is not memory, it is the amount of available storage remaining on your iMac's hard disk. 166 GB is a lot.

Can I increase storage and speed to my iMac computer?

I have close to 20,000 pictures and videos, and I'm not sure how much more my iMac can handle. Is there a way to increase to several terabytes and increase the speed through Apple?
Thanks!
T

T ~ Welcome to the Support Communities. If you want to use an external hard drive for your iPhoto library, this Apple doc may help:
iPhoto '11: Move your iPhoto library to a new location
And regarding improving your iMac's speed by increasing its RAM:
iMac: Memory specifications and upgrades
...Found by searching HERE.

Need For Speed: Carbon & Intel iMac 2.8 GHz

Hello All,
I just bought *Need For Speed: Carbon*. I thought I met the requirements, but some other forumes discuss the ATI card may not be enough for the game. The game gives me the error "Cannot locate the DVD-ROM", although it is clearly inserted. I followed the instructions exactly, installed it onto my iMac, and then typed in the CD Key provided on the booklet.
*My Apple iMac* from 2007 has 2.8 GHz, Intel Core 2 Duo, with 2GB DDR2 SDRAM. 800MHz Bus Speed and L2 cache of 4 MB. I am using an _ATI Radeon HD2600_ graphics card. I am running Mac OSX 10.5.7.
*Need For Speed: Carbon's* requirements for the game are Mac OSX 10.4.9 or higher, 1.83 GHz Intel Core 2 Duo or faster, 512 MB RAM or more, 8x or faster DVD-ROM drive, 5.3 GB or more free space on HDD, and finally video cards Nvidia (7300 or better), *ATI (X1600 or better)* +Note: GMA950 integrated graphics adapter is not supported.+
Help!? I have all the required specifications. I don't understand why it isn't accepting the program and not booting at user prompt. Thanks in advance.
Message was edited by: mojolevy (Morris Levy).

EA has some information on this problem here. If that doesn't help, you may want to take this up on EA's own forums.
Good luck.

Tips to speed up my imac

Similar Messages

Maybe you are looking for