Tired of getting On-Screen Message about aligning new print cartridges​.

Hello, 
I have an hp Deskjet 5440 Printer. Every few minutes I'm getting the message (on the monitor screen): "If you have just installed a new print cartridge it is recommended that you align it. Click on "Align" to align your new print cartridge."
I use generic ink cartridges which the printer does not recognize so I never go through the alignment process.  I did not like using the alignment process even before I started  using generic cartridges because it seemed to be a waste of paper, ink, and time. So, whether I'm using generic or hp cartridges I'm getting the message - over & over & over. It really takes the fun out of using my computer. Can anyone tell me how to stop these #$%^* messages?
Thank you,
Bakwtr

The way to stop the alignment messages is to complete the alignment process.  Regardless whether the cartridges are new or refilled the alignment process should be done. In addition to the alignment (necessary for best print quality, you may not care) the process also sets the correct operating energy for the printheads. This is important to get the best quality and also life from the cartridges.  The amount of ink used in the alignment is tiny, particularly compared to the ink that may be wasted if the printer is not using the correct printhead energy (and temperature).
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • Just upgrade Pages and now I keep getting this asinine message about a new version when I attempt to open Pages 09

    I just upgraded to the new version of Pages that was released today.
    Before that I could start up either the old Pages 09 version or the new version whichever one I visit.
    Seeing as how I have a lot document that use feature not included in the newer version I have been running the older version most of the time.
    Now if I attempt to do that, I get this asinine message about a new version which takes me to the new version and gives me now way to open the older version.
    Is any one aware of a work around for this problem?
    I am going the express my displeasure on the Apple Feedback page now also.
    Allan

    This is the App Store Help instructions:
    Manage app subscriptions
    You can change renewal settings for subscriptions and re-subscribe to apps in App Store.
    Choose Store > View My Account, sign in, then click Manage (next to Subscriptions).
    If an app is set to renew automatically, do any of the following:
    Change your renewal duration:
    Select a setting in the Renewal Options list.
    Turn off automatic renewal:
    Select Off as the Auto-Renewal setting.Your subscription continues until it ends, and is not renewed automatically.
    If an app is not set to renew automatically, click the Subscribe button next to a duration. If your current subscription has expired, this renews the subscription to the app and turns on automatic renewal.
    Apple does say it won't respond to feedback.
    Peter

  • How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or password. If I delete my apps and start over, I may lose the apps that I purchased...

    How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....

    Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
    If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
    you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well.

  • I rented Hotel Transylvania from iTunes two days ago to watch tonight on Apple TV. I get an error message about not available in U.S. and it won't play. What gives?

    I rented Hotel Transylvania from iTunes two days ago to watch tonight on Apple TV. I get an error message about not available in U.S. and it won't play. What gives?

    you may have inadvertantly purchased it from a non us itunes store section of itunes. go to expresslane.apple.com to get a refund and if you want to rent it again, on your computer itunes screen, scroll all the way to the bottom, and make sure the country indicator at the bottom right has the usa flag

  • Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself.  Once in awhile i get an error message about unknown error 1.  If i look at the diagnosis or if runs on itunes i get the following i

    Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself.  Once in awhile i get an error message about unknown error 1.  If i look at the diagnosis or if runs on itunes i get the following.  When I called the support at AT&T they think the phone is shot and it is a hardware thing but i have a hard time believing that when it happened when I sync'd it to my computer.  It did get progressively worse though, at first it crashed not that often and then got worse.  So restores are failing, recovery, everything.  Anyone run into this? 
    11-11-16 18:20:36.319 [2232:16dc]: amai: tss_submit_job: HttpQueryInfo returned 200
    2011-11-16 18:20:38.350 [2232:1c50]: <DFU Device 0F128BE0>: production fused device
    2011-11-16 18:20:38.350 [2232:1c50]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:20:38.350 [2232:1c50]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#1bfe4c4c
    2011-11-16 18:20:39.132 [2232:1c50]: WinDFU::UploadData: EOF, cbRead: 553
    2011-11-16 18:20:39.147 [2232:1c50]: WinDFU::UploadData: ZLP
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ResetDevice: resetting...
    2011-11-16 18:21:02.210 [2232:1c50]: WinDFU::FinalizeDfuUpdate: success
    2011-11-16 18:21:03.491 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:03.507 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 18:21:03.757 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:04.554 [2232:1b88]: amai: tss_submit_job: HttpQueryInfo returned 200
    2011-11-16 18:21:10.882 [2232:1b88]: <DFU Device 0F198478>: production fused device
    2011-11-16 18:21:10.882 [2232:1b88]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:21:10.882 [2232:1b88]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#cfe11997
    2011-11-16 18:21:12.788 [2232:1b88]: WinDFU::UploadData: EOF, cbRead: 1321
    2011-11-16 18:21:12.804 [2232:1b88]: WinDFU::UploadData: ZLP
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ResetDevice: resetting...
    2011-11-16 18:21:20.866 [2232:1b88]: WinDFU::FinalizeDfuUpdate: success
    2011-11-16 18:21:21.835 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:21.835 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 18:21:21.897 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
    2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: pipe stall
    2011-11-16 18:21:22.054 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
    2011-11-16 18:21:22.054 [2232:1838]: command device request for 'getenv radio-error' failed: 2008
    2011-11-16 18:21:22.054 [2232:1838]: unable to open device_map.txt: No such file or directory
    2011-11-16 18:21:22.054 [2232:1838]: <Recovery Mode Device 0F2A7768>: production fused device
    2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
    2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: pipe stall
    2011-11-16 18:21:24.007 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
    2011-11-16 18:21:24.007 [2232:1838]: command device request for 'getenv ramdisk-delay' failed: 2008
    2011-11-16 18:21:38.319 [2232:1344]: fixed TcpWindowSize (64512) can cause restore failure if too large
    2011-11-16 18:21:38.335 [2232:1344]: unable to open device_map.txt: No such file or directory
    2011-11-16 19:21:54.475 [2232:1344]: amai: AMAuthInstallBasebandHandleUpdaterStatus: outputDict is NULL
    2011-11-16 19:21:54.538 [2232:1344]: <Restore Device 0ED73918>: Restore failed (result = 1)
    2011-11-16 19:21:54.647 [2232:8ec]: iTunes: Restore error 1
    2011-11-16 19:22:09.100 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:22:09.100 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:22:09.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:37:25.319 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:37:25.335 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:37:25.382 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:52:41.679 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    2011-11-16 19:52:41.679 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
    2011-11-16 19:52:42.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
    I also get a system crash reporter key of c392e98c929aa0b351037af00d75d08aeadc843c    bug type 110
    incident identifier  8ff84a87

    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.

  • Hi everyone, I have LR 5 that I purchased with a serial number and about a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, last time from LR4 to LR5 there was just an update without buying the creative cloud,

    Hi everyone, I have LR 5 that I purchased with a serial number and about a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, last time from LR4 to LR5 there was just an update without buying the creative cloud, is that possible from LR5 to LR6? Thanks so much.

    Welcome to Apple Discussions!
    You can't install 9.2.1 or earlier on any Mac that is only Mac OS X bootable. In fact you need to use the restore disks which came with those Macs to install 9.2.2 on those Macs. 8.6 is only possible to install on Macs which came with 8.6 or earlier. The 9.1 disk may be useful for your 1999 PowerMac G4, but won't be of any use for a 2006 Powerbook G4.
    Adobe Pagemill does not follow w3.org web publishing standards. If you want a webpage editor, get http://www.barebones.com/ BBEdit
    MS Office, there is a free Mac OS X alternative in http://www.neooffice.org/
    Or you can upgrade to the full Office 2004 for the Mac, or get http://www.thinkfree.com/ or Open OS X Office.
    Wordperfect files can be converted to Word files with http://www.dataviz.com/ 's Maclinkplus.
    Microsoft no longer has Internet Explorer for download (that quit being offered January 2006), though that is covered more in my FAQ:
    http://www.macmaps.com/browser.html
    As for other Mac OS X inquiries, I strongly recommend seeing my other FAQ:
    http://www.macmaps.com/macosxnative.html
    which should answer most of your other questions. If you have further questions, please feel free to ask me.
    Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

  • Everytime i close firefox, i get an error message about quicktime not working. 6 times.

    browsing normally, close firefox, i get an error message about quicktime not working. i click ok. then another comes up. i click ok. 6 times total this error message comes up, every time i close firefox. really annoying.

    If there are problems with updating or with the permissions then best is to download the full version and trash the currently installed version to do a clean install of the new version.
    *Trash the current Firefox application (open the Applications folder in the Finder and drag the Firefox application to the Trash) to do a clean (re)install
    *Install the new version that you have downloaded
    * http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
    Your personal data is stored elsewhere in the Firefox profile folder, so you won't lose your bookmarks and other personal data when you uninstall and (re)install Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    You can also try to repair the disk permissions:
    *http://thexlab.com/faqs/repairprocess.html

  • What to do when you get an error message about data execution prevention

    i have windowsXP and i downloaded Itunes now that i try to open itunes i'm getting an error message about Data Execution Prevention. Please let me know what to do to be able to open itunes...

    You came from the correct article. Here is what it has to say about that error.
    Error 2, 4 (or -4), 6, 1000, 9006
    Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. It does not show up under "Programs".

    I'm trying to install itunes on my new computer and I keep getting the error message about Windows Installer. I've seen the other posts regarding this issue, however, I am unable to even get it to load for it to show up under "Programs".

    Repair your Apple software update.
    Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you don't find ASU, go to Control Panel:
    START > CONTROL PANEL > Programs n Features / highlight ASU and click CHANGE then REPAIR,

  • Why do I get an error message about 'purging the central cache' everytime I open Bridge?

    Whenever I open Bridge I get an error message about the cache not being able to be read and that I should try purging the central cache in Cache Preferences.
    I've looked at the Cache Preferences and purged the cache as it suggested, but this message comes up every time I open Bridge. Any help gratefully received.
    Cheers,
    Cathie

    Your central cache file seems corrupted and you ave to delete this manual. Regarding your screenshot you seem to be on a Mac.
    Per OSX 10.7 the user library is hidden, if you don't have your user library in view use menu go in Finder with option key to reveal this library.
    Quit Bridge, go to your user library (user (your username) / library / Caches/ Adobe/ Bridge CSxx (your version) and inhere are a plug in file and a folder called Cache.
    Drag both files outside of the library (preferable to the trash) and restart Bridge. This creates both deleted files again but the cache folder is empty and you need to recache your files again (takes a bit of time) but then you should be OK.

  • When uninstalling an older version of reader, I get an error message about transform paths

    I tried to uninstall version 8.1.2, and I get an error message to verify that the specified transform paths are valid. Some body please help. I could use the 90mb of space it's taking up.
    My system is a laptop, vista 32 bit. No security update issues are involved. I am running version 10, and simply want some memory back.

    Claudia, thanks for the link. It removed the old version in about 30 seconds Microsoft Fixit looks like a great repair tool. Thanx for the hook-up. Redbaron8.
                                                                                    Think of your family and friends often.
    Always keep an eye on your enemies,
    and be sure you know the difference between them!
    Willy
    Date: Thu, 12 Jan 2012 09:35:24 -0700
    From: [email protected]
    To: [email protected]
    Subject: When uninstalling an older version of reader, I get an error message about transform paths
        Re: When uninstalling an older version of reader, I get an error message about transform paths
        created by Claudio González in Adobe Reader - View the full discussion
    If you feel you need erasing 90 MB. I would suggest getting some additional storage medium (external HD, ...). In any case, you may want to try the following: Run this fix from Microsoft: http://support.microsoft.com/mats/Program_Install_and_Uninstall Uninstall Reader using Add/Remove Programs
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4135555#4135555
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4135555#4135555. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Reader by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I am trying to export a project in iMovie and I keep getting a error message about code revision

    I am trying to export a project in iMovie and I keep getting a error message about code revision. i need help!!!

    Hi there!
    Are you certain that the serial number is for InDesign? And the correct version?
    Please feel free to PM me if you wish to verify the serial number.
    Thanks,
    Amy

  • Getting an error message about UID:  Unowned UIDs for ImageFrame   CANNOT SAVE FILE

    Getting an error message about UID:  Unowned UIDs for ImageFrame   CANNOT SAVE FILE

    Hi,
    Could you please share your .muse file with us to investigate? Please email it to [email protected] If your file is greater than 20MB you can use something like Adobe SendNow or SendThisFile or Dropbox. Please do not forget to mention the link to this forum thread in your e-mail so that we can identify the file.
    Regards
    Vivek

  • HT1657 What if I get an error message about lack of storage?

    What do I do if I am trying to rent a movie and I get an error message about a lack of storage space? I added more and still get message. Thanks

    How much space is available on your iPad (presuming you're attempting to rent the movie directly from your iPad)? From other reports I've seen, you typicallly need to have available about twice the space of the movie takes up to complete the download. A movie can be up to 4.5 gigabytes or so for an HD movie, meaning you could need up to 9GB available; ca. 3GB or so for an SD movie.
    Regards.
    Message was edited by: varjak paw

  • HT1151 I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install

    I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay

    Hello Valerie Anderson,
    I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
    https://discussions.apple.com/message/21854775#21854775
    Let me know if this helps.
    Thanks!
    Harry

Maybe you are looking for

  • SXMB_MONI: LogVersion

    Hello everybody, we got the following problem: A synchronous HTTP-Request reaches the integration engine. After that a BPM is called and everything is fine. Prpblem: Only the first message (The sync. http request) get the state "log version" in SXMB_

  • Can pivot capable monitors be used in vertical position with Tiger OS?

    I'm a writer and want to purchase an LCD monitor with pivot cabability, so I can use it in the vertical position to see an entire page. I know that pivot monitors come with software to enable viewing in the vertical position for Windows PC's, but is

  • Concatenate multiple lines into one

    Post Author: [email protected] CA Forum: General Hi,I'm trying to pull data out of one table that could have multiple lines (indicated by a line count field for each row).  The user wants to see all lines in one field only.  I tried the following but

  • Smart Dialing option

    I bought blackberry z10 and upgraded immediately to version 10.1.0.273 but I cannot find smart dialing option in the phone settings in my devices what do I do

  • CAMILEO P10 - How to remove the battery ?

    Hello, How can i remove the battery from my CAMILEO P10 ? I wanna use two batterys, but can't remove the first :( PLS HELP ! Thanks in advance !