Titanium HD Onkyo 7.2 reciever only 5.1 available in speaker settings

Do you have any idea how I can get at least 7.1 available in the speaker set up. I get a choice of headphone 2.1 or 5.1. I'm using the optical jack to communicate with my Onkyo 802 reciever which has 7.2 available. I am also using windows 7 64 bit

I'm not sure what you are trying to do with your setup. You have connected your Onko receiver to your X-Fi by an optical cable. In or OutAre you trying to listen to your PC on your home hifi system or the other way around?
My guess is you are trying to listen to your PC on your home hifi system?
In either case speaker quantity selection on the X-Fi is not dependant on the signal source (cable, optical or otherwise). You can chose 7.1 speaker setup even if you dont have any speakers attached.
Do you have 7 speakers + a SW connected to your X-Fi systemIf yes then you should select 7. through the console launcher.
Do you have 7 speakers + SW's connected to your Onkyo receiverIf yes you should setup your Onkyo appropriately.
What you can't chose is how many channels to transmit over the optical cable between the two, in either direction. This is determine by the content source and should be transparently transmitted between the systems.
So are you testing with a certified 7. DVD or Blue-ray
On most systems you can chose to transmit either bit-stream or pcm-linear but you cannot however chose the number of channels to send. ?Some systems, allow you to mix-down signals (usually to pcm-linear).
Keep in mind pcm-linear is almost allways 2 channel only.
Hope this helps.

Similar Messages

  • Reciever only has one port

    I just hooked up my Apple TV without any issues, except my home theatre reciever only has one port for HDMI and one Optical Audio port.  This means in order to get Apple TV on my surround sound I have to manually switch the optical audio cable from the back of my sattelite reciever and then back again to watch satellite television.  Any possible solutions? 

    Welcome to the Apple Community.
    You could consider an HDMI switch.

  • How the message appear to reciever only not the sender.

    Hi Everyone,
    I want to know in p2p or client server architucture ,how to view a Instant Message without adding the sender ip or Machine name , such in all IM software the sender see it's message what i need is how the message appear to reciever only not the sender.
    How can i exctract the Machine name on a Lan.

    OCKBA wrote:
    I want to know in p2p or client server architucture ,how to view a Instant Message without adding the sender ip or Machine name ,For the server to receive a message, it has to read it from a socket. To prevent the sender seeing its own message, remember which Socket it came from and make sure it doesn't go back to that Socket.
    How can i exctract the Machine name on a Lan.socket.getRemoteAddress()

  • HT201364 How do I get more free space in order to upgrade to Mavericks OS. I only have 1gb available and I need 2

    How do I get more memory so I can upgrade to Mavericks OS? It is telling me I need 2GB and I only have 1GB available.

    You need to buy and install more RAM. Use a source such as OWC or Crucial.
    (105206)

  • I can't exit Home Sharing on start up.  My only selection choice is Computer or Settings.

    I can't exit Home Sharing on start up.  My only selection choice is Computer or Settings.

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
        1.    Restart the Apple TV (Settings > General > Restart).
        2.    Restart the Apple TV by removing ALL the cables for 30 seconds.
        3.    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
        4.    Reset the Apple TV (Settings > General > Reset > Reset all settings)
        5.    Restore the Apple TV (Settings > General > Reset > Restore)

  • I have a Philippine Store account, and currenty Iam here in Bahrain, and the only itunes cards available here is US store itunes card, How can I use it?

    I have a Philippine Store account, and currenty Iam here in Bahrain, and the only itunes cards available here is US store itunes card, How can I use it?

    You can't - to be able to redeem and use a US iTunes gift card you will need to be in the US with a US billing address on your account. Whilst you are in the Bahrain you can only use the Bahraini store, and you will need a Bahraini billing address on your account

  • My phone is stuck in recovery mode, and iTunes will only let me restore to factory settings.  My question: Can I restore from iTunes backup after restoring to factory settings?

    I attempted to update to iOS 8 and now my phone is stuck in recovery mode, and iTunes will only let me restore to factory settings.  My question: Can I restore from iTunes backup after restoring to factory settings?

    Hi, kformagg
    I would say yes. I once had the same problem (iPhone 5, IOS 7) and first restored to factory settings and after that from iCloud backup.
    It worked very well.

  • I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

    I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

    In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
    Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
    Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
    If it does contain data...
    http://support.apple.com/kb/TS2474

  • Pages problem - Only two fonts available in the Fonts window.

    Hey there,
    Would love some help on this one.
    I am working in pages and when I bring up the Fonts window there are only two choices available (either with some text/object selected or not) - Helvetica 12.0 pt and Helvetica 9.0 pt. That's it. Nothing else.
    Same thing no matter how many new documents I start with.. even opening templates presents no more options. The template fonts are in the template itself, can be selected and even prevew in the for window but are not in the list to be selected.
    I tried resetting the font cache via these instructions -
    http://pagesfaq.blogspot.com/2007/11/my-fonts-in-leopard-are-crazy-how-do-i.html
    But no change.
    Any help would dbe required as writing wedding invitations kinda needs to get done soon.
    Thanks,

    Peggy, you are a genius..
    So **** simple!
    What a tool I am.. the bizarre thing is that it didn't look like there were any more columns to display but sure enough, when I moved the window and stretched it out - there they were.
    Thanks again..
    S

  • Unable to select 5.1 in speaker settings - only Front so

    Hello,
    i've got the following Problem with my Audigy 4 Pro.
    In Audi HQ->Speaker Settings im Not able to select anything besides 2. Speakers. If i click on the combobox nothing happens.
    I can activate 5. in the Windows Audio settings but after a system reboot this setting is set back automatically to "Desktop speakers".
    As a result i only hear Sound from my Front speakers.
    (I've connected the analog 5. Teufel concept e magnum with my audigy)
    The settings did work some time ago but now they doesn't (i didnt do something special besides selecting one time "headphones" as my speakers while i used them on a LAN-Party)
    No driver change or anything else.
    I really hope that this is a known problem and somebody could help me out with this. (Allthoug i didnt found anything similar with the board-search)
    Thanks in advance
    Hotkey

    I'm having the same problem with my audigy 2. I reloaded my computer and installed and updated the drivers, and when I go to the pull down box in Speaker Settings nothings there. Can anyone help?

  • My ipod wont play music solely through the ear phones it will only play through the main speaker and quietly through earphones. Is this fixable??

    My ipod wont play music solely through ear phones it will only play through the main speaker and the earphones together. Is this able to be fixed??

    I am also experiencing some problems with the new software version, I bought the Belkin TuneBase for my car 25 days ago it had been working fine since I upgraded my Ipod 2 days ago, you know that sometimes if you don't get good reception you can change to a diferent preseted station on this Belkin Transmitter but since this Ipod upgrade I can't change to a diferent station and also i can't disconect it like before because before it said you were ok to disconect and I'm afraid to return because perhaps afterall is a software problem.

  • IPod only funnels sound through left speaker

    my iPod Classic (120 gb) has suddenly stopped funneling sound through both speakers and now only plays through the left speaker, on whatever output i'm using, be it speakers, headphones, whatever. I had a similar problem with the last iPod i had -- a 30gb iPod video -- and my main question i suppose is if this is an easy fix with a simple solution or if my ipod is screwed and its time to get a new one. Thanks preemptively for all of your responses, hopefully i don't have to go too long without hearing both sides of harmonized guitar solos -_-

    i would check the headphone 35mm jack for any foreign materials, as they may cause lessened connectivity.

  • My Library (History/Show All History) does not show ANY History - only Tags & "All Bookmarks". What settings do I need to adjust to have this show. Nothing in the Options/Privacy seems to be relevant

    My Library (History/Show All History) does not show ANY History - only Tags & "All Bookmarks". What settings do I need to adjust to have this show. Nothing in the Options/Privacy seems to be relevant in English

    Lightning is a problem for you because it hooks into Thunderbird at a low level and you need a version compiled for the platform Thunderbird is running on. So you can't do the preferred solution, which is to put your whole profile in a shared folder and have both instances of Thunderbird reference the same profile. (Ditto for Enigmail). Lightning may become an integral part of Thunderbird in an upcoming release, at which point this limitation due to Lightning should disappear.
    And if you can't use a shared profile, you can't set your Lightning, or your Address Book, to share a common set of files. Put another way, the linkage from Thunderbird to its address book files and calendar data is hard-coded, and not exposed where we can adjust it. :-(
    The halfway house is to place your mail stores in a shared place, and use the Local Directory setting in each account's settings to connect to it. They don't need to be in the profile; what's more important in your case is that they are in a folder accessible to both operating systems.
    Look in your profile; everything under Mail and ImapMail needs to be moved out to a shared folder. Note the entries in Thunderbird under Local Directory before you do this, and reconstruct those pathnames in Thunderbird, but adjusted to suit their new locations.
    (You can see here that you need to make many adjustments, one per account, in each instance of Thunderbird, so it's a high-maintenance solution and this is why we don't recommend it when the alternative, moving the whole profile, is possible.)
    I share address books and calendars between Thunderbirds on various computers (and my phone and tablet) by syncing to something in the cloud; Google Contacts and Google Calendar are my choices, using gContactSync and CalDav.
    Having made the break myself some years ago, I'd recommend you break away from Windows. ;-)

  • Error while installing Jdev 11.1.1.16 on Mac -"There is only 1 MB available

    Hello,
    I am trying to install Jdev 11g on my macbook and every time I try getting below error.
    Insufficient disk space ! installer requires:-
    832 MB for middleware home at /users/Kumar/Oracle/middleware,
    There is only 1 MB available at /Users/Kumar/Oracle/Middleware
    I followed Can't install jdeveloper 11g build 5188 thread but no luck... I am windows user, try to switch on mac.
    Pls advice. Its frustrating.

    Kumars-MacBook-Pro:~ Kumar$ du -h oracle/Middleware
    0B     oracle/Middleware/jdeveloper
    0B     oracle/Middleware/wlserver_10.3
    8.0K     oracle/Middleware
    all folder are empty.

  • My iPhone only has "headphone" volume, no "speaker" volume.How do I fix this so I can hear phone calls?

    My iPhone only has "headphone" volume, no "speaker" volume.How do I fix this so I can hear phone calls?

    The phone may be stuck in headset mode. Rapidly plug and unplug a headset 10x to free up the switch inside the jack.

Maybe you are looking for

  • Ive downloaded it and still wont let me do what i need too do

    I went on my facebook to play a game and it told me i had to download the 11.4 something so i clicked and downloaded it and went back after it went through and i went to play the game again and it yet still said that it wasnt downloaded, so i went ba

  • Lion Mail will not open, and won't update the database. Help??

    When I try to open mail, for the first time says it needs to update my database, It seems to start then crashes. Is there a fix?

  • Error code 400-1 when trying to access abc family

    When trying to watch shows on abc family online, I log in with my provider and still get the error code 400-1. Does anyone know what this means or how to help fix it?

  • What program is apple using to make there website?

    I was wondering (because I would like a website as powerful as apples and as easy to use as iweb). What Program did apple use to make there website and do you need multiple programs to do those things such as. the way buttons are animated not using f

  • Font Management Guidance

    Just installed CS4 for Windows. Currently using Extensis Suitcase for Windows (v11x). I don't believe that the "auto activation" feature works with CS4. What type of font management program that incorporates that type of feature would you folks recom