Title across all video clips

I have 4 video clips that I would like to merge together in to one seamless video, add a song over the top, and add a title at the beginning to be present to the very end.
I added the 4 clips and used the "none" or " | " transition between them making it seemingly seamless (heh).
I was able to get the audio overlayed across them all.
However, when I add the title, it only goes across the first of 4 clips.
How can I get it to last the entire length of the video (all 4 clips)?
Thanks! :-D

timmyleeturner
Please perform the following computer maintenance...
a. Adobe Folder. Look for pile ups in the Adobe Premiere Elements Preview Files Folder and delete them. Look for pile ups in the Media Cache Folder (conformed audio cfa and pek files) and delete them.
b. Edit Menu/Preferences/Media. In the Media Cache section, click on the Clean button to get rid of the conformed video (.mcdb) files.
c. Run the ccleaner, regular cleaner and registry cleaner.
http://www.piriform.com/ccleaner
As far as you can determine how do the 10 differ from the 46 videos. What is the hard drive save location for these 46 videos and is that drive formatted NTFS or FAT32? The properties of those videos (aside from the .mp4 file extension) would be included in your exchange of information, along with project preset.
Since you are working with a 32 bit application in Premiere Elements 9.0/9.0.1 with all the limitations of a 32 bit system, I am thinking that the issue probably goes to level of computer resources and maintenance.
Let us see if we can sort this out. There are other avenues to pursue but the above seems more indicated at this time.
Thanks.
ATR

Similar Messages

  • While working in iMovie, computer shut down and all imported clips from that project disappeared. The project still existed, with titles, but all video clips were gone from the movie as well as the computer library.

    Clips were imported from SD card into iMovie project. While working on the project, computer shut down. When restarted, all clips from that event were no longer in the project, or in the computer library. Project existed, with titles, but blank spaces exist where clips had been.

    OH MY GOD! This EXACT thing just happened to me! It didn't save my event and didn't show the date in the iMovie library but if I look under all projects, the project is there. Except that there are little blank place holders where all my clips were. Also the title of the project has a little yellow "!" symbol next to it which I can only assume means that the file is corrupted.
    I can't believe it destroyed like 8 hours of work!
    I have a 15" mid 2011 MBP and Mavericks OS.

  • I upgraded to Lion and then all video clips on for instance Youtube freeze every tenth second to buffer more data. I have a MacBook Pro and never had any problems when using Snow Leopard. Ulf Magnusson, Sweden

    I upgraded to Lion and then all video clips on for instance Youtube freeze every tenth second to buffer more data. I have a MacBook Pro and never had any problems when using Snow Leopard. Has Lion problems with this?
    Ulf, Sweden

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • How to get all video clips to the organize at the same time

    Hi,
    I am a new user and I wonder how to get all video clips to the organize via Get Media or ?? at the same time. Now I have got it one after another and it is very slow.

    My meaning is  to get the clips from hard disk folder. No one after another but all the same time.

  • How do I add a title to a video clip w/ LiveType 2 and Final Cut Express 4

    I have Final Cut Express 4 & LiveType 2.1.4, I'm not sure how to add titles or test to a video clip, and the tutorials for Final Cut Express 4 don't say how to get started in LiveType. How do I simply add text? The tutorials say how to add effects to the text they just don't say how to add it to the clip or how to get the clip into LiveType.

    Well, you don't actually _add text_ to a video clip, you _create a text clip_ and add that clip to your timeline, either adjacent to an existing clip or on the next higher track if you want to layer the text with an existing video clip.
    The very simplest way to add text is to use one of the *text generators* built into FCE. Lower Third, Text, Scrolling Text, etc. allow you to create various text clips and give you basic controls over fonts, positioning, size, color, etc. You can find the text generators in the Effects tab in the FCE Browser.
    LiveType is a separate and more sophisticated application that enables you to do all sorts of things with text (much more than can be done with the FCE text generators). The basic process is - create your title in a LiveType project. Save the LiveType project. Then in FCE, import the LiveType project; from there, you can treat it just the same as any other clip.

  • Cannot import all video clips

    I've never had this problem before with Elements 9, but I attempt to get media from files, select 46 Mp4 Video Clips and it will only import 36 of them.  I've rebooted the computer,that doesn't help.  I cannot select the project from the filter drop down most of the time, although I can see it.  I have to use another method. Even when it works, there are only 36 out of the 46 videos there. I attempt to import the other 10 manually... it acts like it does as you see the progress bar but they are not viewable. I finally was able to accomplish this after having to manually count the videos since there is no indicator, by accessing the Large Project Icon under Organize, but it's not the way I'm used to draging my video clips down to the timeline.  Not sure what is wrong and why it has developed this new behavior. Had I not been manually counting them (odd that there is no number of files indicator) I would have completed a project and would have been missing 10 video clips.

    timmyleeturner
    Please perform the following computer maintenance...
    a. Adobe Folder. Look for pile ups in the Adobe Premiere Elements Preview Files Folder and delete them. Look for pile ups in the Media Cache Folder (conformed audio cfa and pek files) and delete them.
    b. Edit Menu/Preferences/Media. In the Media Cache section, click on the Clean button to get rid of the conformed video (.mcdb) files.
    c. Run the ccleaner, regular cleaner and registry cleaner.
    http://www.piriform.com/ccleaner
    As far as you can determine how do the 10 differ from the 46 videos. What is the hard drive save location for these 46 videos and is that drive formatted NTFS or FAT32? The properties of those videos (aside from the .mp4 file extension) would be included in your exchange of information, along with project preset.
    Since you are working with a 32 bit application in Premiere Elements 9.0/9.0.1 with all the limitations of a 32 bit system, I am thinking that the issue probably goes to level of computer resources and maintenance.
    Let us see if we can sort this out. There are other avenues to pursue but the above seems more indicated at this time.
    Thanks.
    ATR

  • How do you animate a title placed over video clip

    I have been trying to animate a still title that I have placed over a video clip in expert view.  There is only one line.  I have followed the following which I think I got from the Adobe site: 
    Create a title with animated text
    You can easily apply a preset animation to any still title. Text animation presets quickly and easily
    animate the characters in your title so that they fade or pop characters into view, or fly in from the
    top or bottom of the screen. For example, using the Fade In By Characters preset instantly makes
    each separate character in your title fade into view until the title is complete.To preview an
    animation, position the pointer on the Animation tab in the Adjust panel.
    1. Do one of the following:
    In the Quick view timeline, select the superimposed clip. In the Monitor panel, click the clip,
    and then double-click the title text.
    In the Expert view timeline, double-click the title clip.
    The Adjust panel changes to display the text options.
    2. In the Adjust panel, select an animation preset under the Animation tab.
    3. Do one of the following to apply the preset to the title:
    Click Apply.
    Drag the preset to the Monitor window and drop it on top of the title text
    I have had no success no matter what I've tried.  I have a mac.  I would value any suggestions.
    Thanks.
    barb

    SG
    Thanks. But let me clarifiy what I suspect Barb's issue is
    a. not selecting the Text in the Text section of the Titler before applying the animation in Animation section of the Titler.
    or
    b. what I did not yet write, not using Default text since Text Animation does not work with Default crawl or roll
    or
    c. trying to use more than one line of text without the use of special procedures.
    (I sort of put this thought aside when I replied since Barb wrote
    I have been trying to animate a still title that I have placed over a video clip in expert view.  There is only one line.
    I interpreted that as only one line of text was typed in the Titler, not that there were two lines of text types.
    But, the answer should be one of the 3. More details from Barb should help us to pin point the problem.
    I think it was JohnnyO who first pointed out (your forum at few years back) that you can indeed apply Text Animations to more than one line of text in Premiere Elements Titler, but with the use of special maneuvers. I wrote about this and did a detailed step by step and overview on the matter.
    ATR

  • Matte and Title extend beyond Video clip???

    I have several clips in my timeline with associated mattes and titles in tracks above the video clips. I right-clicked on each the video clip and checked the duration of the clip under the speed window, and then copied-and-pasted this into the speed window for both the title and matte clips to make sure that the title and matte span the same duration as the video clip. The problem is the matte and the title are extending beyond the duration of the video clip.
    When I right click on the Matte and Title, the pop-up window indicates that the duration is (00:03:22;20), though when I click on Speed under the pop-up it indicates the duration is 00:03:22:14
    Speed is set to 59.27 and frame blending is checked.
    Any ideas of what is going on here?

    Summary of what I did:
    - I used capture now to capture about 30-minutes of video
    - I used the razor tool to cut out parts I do not need and to make the
    video into a bunch of clips
    - I added a black matte that I need to appear at the bottom of each clip
    - I added Boris Text that I need to appear at the bottom of each clip
    - I place the first matte and text in the timeline and copy it to the start of each clip, the text changes on each clip, so I double-click on the others and change it, the matte stays the same throughout the timeline
    The problem:
    - the matte and the text clips do not span the duration of each of the video clips and I am unable to physically drag them (extend them) to match the duration of the video
    - this is why I took the duration value of the video and tried to input the same value of the duration into the matte and title clips (after right-clicking on them) to force these clips to span the duration of each video clip
    - I did not change the value to 59.27 on any of the clips, it did this itself
    Am I approaching this completely wrong?
    Should I be copying-and-pasting the duration of the each video clip into some other location for each matte and text clip?
    Thanks for your assistance!!!!

  • How can I remove all video clips from my library?

    I noticed my library is up to 23 gigs! Last I checked, it was around 9. The only thing I can think of is that my new canon camera takes great videos, and all summer I've been using it on vacations and things where I didn't have my video camera. So, I'd like a way to find them so I can drag them to a folder I make on my desktop. Then I can incorporate into iMovie if I want, or just burn a dvd or something.
    I have TONS and TONS of photos, and it would take me quite some hours to manually scroll through looking for the movie icons in the browser.
    Any ideas on how to view ONLY the movies for example?

    SynterX
    When you import movies they automatically get a 'movie' keyword, so: New Smart Album : Keyword is movie
    The Select them, export them using the File -> Export dialogue and when you're sure they exported safely, trash them from iPhoto.
    Regards
    TD

  • Strange thin line of 'noise' across all video playback

    Hey, another problem I'm currently having... for no reason my mac has started displaying a flashing line of what I can only describe as 'noise', it's very thin only a few pixels high but as wide as the video playback. This happens in FCP on my viewer window and also in quicktime, not all the time but most of the time.. it also displays on other video playback software.
    Any ideas? I can take a screen shot if that helps...
    Thanks!

    There are many people using iMacs including myself who've developed random lines of random pixels, usually confined to the current window.
    The machines have also become prone to hangs/freezes when these lines appear.
    It is suspected that the problem is related to overheating in some way, as it can be improved by ramping up fans speeds using smcFanControl.
    Most attribute it to overheating/faulty garphics cards but logic boards might also be implicated. It's been seen on the iMacs with ATI and nVidia cards, and on Leopard/Tiger.
    It seemed to appear for me after a software update (early 2008 security update I think), and while that may be coincidence, I do wonder if a bug has been introduced somewhere.
    AC
    Message was edited by: Alley_Cat

  • Color errantly rendering black across all my clips' rightmost 1/3rd

    Editing in a 3072 x 1536 Custom Aspect Ratio, Sq. Pixel 23.98 sequence in FCP 6.0.5, all footage = ProRes HQ; all time-remapped clips baked. Sent to Color, and, after grading, I rendered and attempted to round-trip back to FCP. Only, once arriving in FCP, and indeed, in the rendered Quicktime files themselves in the Color Media folder, every single clip has its proportions correct (no distortion within the content) but the right-most 1/4 of the width of each Quicktime, top to bottom, is now completely black.
    For the life of me, I can't get it to render correctly. Any advice would be greatly appreciated.
    Message was edited by: SheikYoboudi
    Message was edited by: SheikYoboudi

    You might ask yourself, "Why doesn't FCP and COLOR just 'do it' at the original 2K, 3K, 4K resolutions?" This would unfortunately be a "thoughtful", or "skeptical" reaction, much frowned on by the sycophantic fanboy tifosi who have swallowed the marketing... much like any unquestioning religion where any dissent is dealt with pretty much by inquisition and excommunication, or execution as infidel or apostate.
    But when the data hits the mainframe, its a 4K _Bayer pattern_, like any DSLR produces, and 2K color is what you get, as a maximum, not up-rezzed, native resolution. And yes, there appears to be some form of "native" R3D support in the Apple world, but still it is really being wrappered in ProRes as temp RTE playback. So, on one hand, a) expect to do a massive amount of rendering, which on the other hand leads to b) not much productivity, or post efficiency.
    While the device might be a boon to production and the set (even if it is a bit 'slow', requires a lens kit and mounts worth ORDERS of MAGNITUDE more than the body, and exposes the original media to catastrophic loss by simple failures), it still presents a very large challenge to post, as it is massively processor-intensive (by their own admission), and guess who has to make up that difference?
    I'd find it wildly amusing (if it wasn't so farcical) that there has to be at least a dozen companies now claiming to the the "ONLY" RED-workflow production solution. And there's a "gotcha" in every one of them.
    Please.
    jPo

  • Link Title To Video Clip - PE8

    How do I link a "title" to a video clip so that it is locked and cannot shift when editing or deleting clips?

    As you add or delete clips to and from your timeline, it should "ripple", keeping all of your clips in the same positions, relative to each other, but shifting all of your movie right or left as needed as a group.
    Is that not what's happening?

  • In iMovie on the iPad: Recombining two video clips

    I am using iMovie on the iPad (iOS 8.1.1.).  I have a project where I split a video clip into two parts.  I wanted to put a title that runs across both clips but it fades in and out so it doesn't stay on the screen for the entire two clips.  I can't undo because I've made too many other changes since I split the original clip.  Is there a way to recombine these two clips so that I can run a single title across the entire clip?

    Hi wall ice-izm,
      I have come up with a workaround, but would like something better. I originally sent the video to iTunes from within
    The iMovie program.
    I then transferred it to my pc and it was in dv format. I did not see any options for saving it in another format. If it is possible to save it in something the pc can read and ultimately that fCebook can read, I would appreciate knowing how. Yes, I do have QuickTime.
    What I ended up doing was buying an app called "photo transfer app". First I saved the video to the camera roll. Then I used the app to wirelessly transfer the iMovie video to my pc and then I was able to upload it to Facebook. It was all very slow and inefficient. When I save a video to the camera roll it saves it in the .MOV format.
    I was also able to transfer the video from iPad to pc by saving to the camera roll and then importing the video into Adobe Bridge CS5
    Isn't there a more direct way of saving a video to the pc from within imovie in a format it recognizes?
    Nancy

  • Cann't sync video clip from iphoto to iphone 4

    i just have my new replacement iphone 4 today
    and i try to set up everything
    but i cannot sync all video clip i have from iphoto to my new iphone
    any suggestions? thank you

    Holy crap you guys! I'm spinning with outstretched arms knocking stuff over jubilantly screaming "YESSS"! while you guys sit, spinning in your chairs saying "great we saved another idiot..."
    I was told my videos would appear in my photo album.
    Thank you. ThanK YOU! I need to go have some fun now. Wow, it looks great!
    Thanks again. Am I really an idiot...

  • Cannot Access video clips from external hard drive

    I have been using PE9 for six to nine months.  My normal workflow has been to create a separate project file on a 500g external HD. This file includes all video clips (.mov files) and the Project.PREL file.
    This worked great until just recently.  I can no longer bring the .mov clips in the project timeline or sceenline from the hard drive.  Using the “Get Meda” command only an “imcomplete” file is uploaded, and when I try to drag the clip to the timeline, the program is asking me where the file is. Something has changed – and I am not sure what or how to fix it.
    The image above is from a project where I am having this problem.  The clips that have images in them are uploaded from my laptop hard drive.  Other others are from my external hard drive - and those are the ones that the program cannot "locate".  This is what I am trying to understand how to fix.  Again, this just suddenly started happening - so somehow I have changed something, I would think.
    The same clips can be imported when they are stored on my hard drive.  When I try to import them when stored on a video card, the PRE Video Importer opens and I can bring them into the program this way.  However, these are not viable work-arounds for me.
    So what has changed – I cannot determine.  Is there some setting, codec, or something that I can investigate that would cause this? As I said, this only started happening?
    Also, some past projects open correctly and some cannot find the files – even though they are all stored on the same 500g HD.
    Please Help.

    For instructions on how to do things in Windows, search http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
    I don't know the exact search words you should use... maybe something like
    removeable drive letter
    or
    set drive letter
    or
    set usb drive letter
    Set it to a letter that you are sure is otherwise NOT used... ie, something other than a camera and/or memory stick you connect via USB

Maybe you are looking for