Title and Transition slides lost

When I did the update several of the title slides and transition slides disappeared. Is there any way to get them back? Where do I find them?

Hi
Really no real vision memory of this - but You may be right and then
• Turn on Advance tools
• Trashing the iMovie pref file
• Repair permissions
use to help when things don't work OK
Yours Bengt W

Similar Messages

Adding titles and transitions in iMovie HD 6

Tried to add titles and transitions to a couple of short ( 5 mins and 10 mins or so) films only to find sound is out of sync with pics. On checking found that I had recorded in 12 bit audio (dammit). Is this the cause of my problems and is there anything I can do long after the fact? I thought this was only a problem that happened when you had long films being sent to iDVD.

Sorry, iMovie doesn't offer that transition feature, nor does iMovie support Applescript. The only way I know to add a transition is to manually add it to the Timeline.
Regrettably, sometimes Apple doesn't eat its own dog food.
Karl

Titles and Transitions doe not work after upgrading to Snow Leopard

I can not get my Titles or transitions to work in iMovie any more after upgrading to Snow Leopard.
Everything goes to a black screen. I am having problems with final cut express also. Anyone have an idea when there will be a patch to fix this? I would hate to have to down grade.

Holy *&$^, no kidding. I mean this is bad. I can't really do anything on iMovie at all. I really hope there is a simple solution to this, b/c if this really is part of a bad release, Apple will not hear the end of it.

Title and end slides in IMovie?

Is there any way to have a blank background you can write on for the title and ending in iMovie '09.
I don't want that info superimposed over the video. I would have thought they could provide a single panel to do that similar to all the other titles they offer. Do you have to make that elsewhere and import it?
Thank you

Wow, thank you, Apple man! That was simple. However, I found that when I select the Centered title which shows a larger heading and a smaller subheading, as soon as I try to select a font, color, and size, both lines, heading and subheading, default to the same size, and won't go back to 2 different size fonts. It seems to be one text field, rather than two separate one, as it is in the "Lower Third" title.
I guess that can't be helped.
thanks again, Josh

IMovie 09 playback(full-screen) choppy during titles and transitions.

When I insert someting like a moving title, or a fading transition into my movie: the full-screen playback (and not the playback on the viewer) gets choppy or skips a movement. It specifically happens where the screen should be fading/transitioning or when a title should be moving/fading onto the screen. I have all the updates for 09 and I'm pretty sure that if this is the case on a full-scree, it would defenitely happen on a published exported version.

When I insert someting like a moving title, or a fading transition into my movie: the full-screen playback (and not the playback on the viewer) gets choppy or skips a movement. It specifically happens where the screen should be fading/transitioning or when a title should be moving/fading onto the screen. I have all the updates for 09 and I'm pretty sure that if this is the case on a full-scree, it would defenitely happen on a published exported version.

Alpha channel is gone in imovie titles and transitions

Hi,
Who can help me with this problem: http://files.rwdproducties.nl/vraagbaakvideos/ENhelpasked.mov
I don't know where to search anymore to solve it.
(Already did verify permissions and repair permissions and this did not fix the problem)
I use iMovie everyday for my small business and desperate for some help here.
Thanks!
Ben

There could be a missing component in Snow Leopard. I would try backing up your system to an external disk using a tool like Super Duper. Then reinstall Snow Leopard. Then use the Migration Utility to reinstall everything,
Better yet, have you tried contacting Apple? There is a Contact Us link for Apple at the bottom right of this page.

Titles and Trans unable to 'Update' ???

I am able to preview the titles and transitions that I would like. (both in the small window and the larger view panel) However, I am unable to 'update'. The button is actaully greyed out and I am un able to select it. However, the 'effects' options works great.
what am i doing incorrecly?
suggestions??

Thank you for your response. However, I am still having challenges. I do not see the 'T' that you are referencing. My screen is as follows:
Large view panel in top 3/4 of screen - along the bottom are the clips/timeline.
Just above that is a series of buttons for clips/photos/titles/trans/effect/idvd
when I select title i am provided with a panel that has the small preview window, speed control, below that is where I would select what i want the title to do...cartwheel, spin, shiver,..a lot of choices. next is my font / color selection.
and below that are two fields where I would type my title - it originally said
My Great Movie
Jack Ragan
there is no T.
Frustrating because I know I am trying too hard and it is gonna kill me when I finally see it.
HELP (again)

No titles or transitions in iDVD

When I export my iMovie '09 project into iDVD 7.2.1, all my titles and transitions are gone. Why?

Try use the Share ➙ Media Browser menu option in iMovie and add the movie from the Media/Movies pane in iDVD. That will give you better image quality results than the Share ➙ iDVD option.
You can drag the movie from the Movies pane to the Desktop and play it with Quicktime Player to check on the titles and transitions. If all is well then drag it from the Movie pane into the menu window on the left:
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Applying a transition to multiple clips, titles, and stills

Hello,
I'm banging my head against the wall trying to achieve something that seems like it should be fairly simple.
I'm producing guitar instruction videos that often use still images, five or more title clips (for text highlighting concepts presented in the video), and generator clips (used for masking). All of this is layered over the primary shot of me talking to/playing for the camera.
I'm looking into using a simple transition like "Slide" between chapters/sections of the video to prevent jump cuts. My goal is to include all clips in the transition: That is, if I only apply Slide to the two clips in the storyline, the other clips connected to the later clip in the storyline--titles, still images, etc.--remain stationary, which looks wierd. I want the whole enchilada--everything visible, still images and titles included--to slide over in unison. And I want to be able to do this 5-10 times over the course of a 5-minute video, and I'll be producing 20-50 videos. So I need an efficient workflow.
A simple example would be the edit at 1:47 in this video I producted:
http://www.youtube.com/watch?v=R3Yvef14A00
I'd like to apply a slide transition so that not only the image of my holding my guitar, but also the title "Stage 2", slid over the preceding footage.
And more importantly, what if, in addition to the text "Stage 2," there was a still image and several other titles? How would I get all of them to slide over together?
Storylines don't seem to be the answer--You'd have to create a different one for each additional clip, which seems cumbersome. And compound clips and transitions don't seem to mix well--when I try to transition between compound clips I'm told there isn't enough extra media to create the transition.
Thanks so much,
Rob

Thank you Jakob, this will make things quicker once I know how to apply the transition.
But it doesn't answer my primary question: How to apply the transition.
Maybe some screenshots would illustrate the problem:
Image 1
www.heartwoodguitar.com/temp-imgs/1.png
Here the playhead is just before an edit point between two sections: The Guitar Strap section and the Capo section. Right now, a single still image is visible (dude with a chain for a guitar strap).
Image 2
www.heartwoodguitar.com/temp-imgs/2.png
Here the playhead is at the edit point where I want to apply a Slide transition. As you can see, in addition to the clip in the storyline (video of me holding my guitar), there are four title clips and two generator clips. I'd like all seven of those clips to slide across the still image of the dude with the chain guitar strap.
Does that make things clearer?

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

Airplay mirroring problem:when i change slide mirroring from off to on ,my new i pad lost wi fi connection and apple tv lost wifi connection:ihave last software for both.Can u help me?thanks

when i change slide mirroring from off to on ,my new i pad lost wi fi connection and apple tv lost wifi connection:ihave last software for both.Can u help me?thanks.
when i use i pad with apple tv for see my photo,youtube and movies all ok.

I suspect that the problem is in your router. Do NOT consider your router to be blameless if some other devices seem to work with it.
Try restarting your WiFi router by removing power for 30 seconds. Don't just turn it Off. On many routers that doesn't really do anything but put the router into standby mode. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
There is a chance that some services turned on in your router could be causing problems. Look for a setting called QoS (Quality of Service). If ON turn it OFF.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.
See also here: http://www.apple.com/support/ipad/wifi/

Sync self made slide shows from with titles and music to I TOUCH

Trying to sync pictures i have put into slide show with titles and music to I touch is there away

Why not make a movie with iPhoto/iMovie?

How do I make a movie for youtube playing music with only a title a transition and a single still?

I want to make videos for youtube show casing music made in Garageband via Imovie, but I am having some problems figuring this out.
So far I have a title and a transitions, but it makes it only last 5.5 seconds...
I want to add a single picture for it to transition to, then show for the remaining duration of the video (which is supposed to be 2:20 long).
How do I do this?

double-click the still in your Project
set time to 2:20:00
the last digits are frames, a 30th/25th of a second ...

About a month ago, I began periodically getting the spinning wheel while trimming, adding titles or transitions, etc. It lasts for about 15 seconds and then goes away. This seems to happen once every minute or two. I have more than enough RAM/Power.

About a month ago, I began periodically getting the spinning wheel while trimming, adding titles or transitions, etc. It lasts for about 15 seconds and then goes away. This seems to happen once every minute or two. I have more than enough RAM/Power, etc. About every other time I use FCPX it will spontaneously close (typically when editing a title). None of these things were happening previously. I have lots of projects that I store on Promise Pegasus drives via Thunderbolt. I only keep a few projects and the associated events open in FCPX at a time, otherwise I use Event Managaer X to keep track of them. Can anybody give me any suggestions as to why this is occurring and what I can do to remedy it? I have the latest version of FCPX as far as I can tell. This is driving me mad and costing me significant time while editing. By the way, I am doing just basic editing. Essentially trimming, cutting and adding some transitions and a few title screens. Thanks in advance for your help.

These apperarances of the spinning wheel tend to be related to some io operation that takes too long. Maybe the finder is trying to reach a network server that became unavailable.
I would try clearing caches and do an overall maintenance with an utility like OnyX.
Also, trashing preferences does no harm and is often the first troubleshooting measure when FCP X misbehaves.

Lost Titles and Keywords during Importation from older Mac

I have a brand new MacBook. The Apple store where I bought it transferred all my files from my old iBook G4 to the new machine. BUT . . . most of the 3000 photos in my old iPhoto (Vers. 5.0.4) file omitted all of the keywords and most of the titles during the transfer to iPhoto (Vers. 6.0.6). I think the shop used Migration Assistant for the transfer.
I have tried 4 times to re-transfer, using Apples recommended method of "Import to Library . . ." using a firewire connection. But I have no better luck than did the Apple shop: most titles and all keywords missing.
The importation also gave me something that I really don't want: The Original of every photo that I ever modified in the past now shows up in the Library. I guess it is important to have the originals stored somewhere, but why aren't they in a hidden file somewhere -- not right up there demanding attention every time I use iPhoto?
I've been a Mac user since the beginning of time, but am now wondering (especially in view of the thousands of questions from other users as bewildered as I) if Apple hasn't gotten themselves into the category of "If you are smart enough to do it, you are too smart to try it". Should I just forget iPhoto, and put all of my photos into folders of my own creation, and manually copy all titles and keywords from my old Mac while I still have access to it?
Thanks in advance for your advice and suggestions.
MacBook Mac OS X (10.4.9) Brand New
MacBook Mac OS X (10.4.9) Brand New

fwheby
First off, there is no part of this process that involves using the 'import to library' function. If you want to do this, you'll be creating a new library and will lose your titles and keywords.
The job is to get the iPhoto Library Folder from the old machine to the new machine.
When you applied BatchMod, did you tick the box to apply to enclosed folders?
Assuming that you did, then we're into file management issues. The usual things that prevent copying are File Permissions (and you've sorted that) or a damaged file.
We'll try an copy the library over piecemeal, and see if we can track down the errant file. This is tricky, as we need to recreate the library exactly or the library won't work.
On the New Machine Create a Folder in the Pictures Folder and call it iPhoto Library Folder.
From the old Library, copy all the ancillary files - just the files, anything not in a folder.
If they work, start moving through your Year Folders. If one doesn't copy, leave it and go on to the next one.
Then, repeat the process until you discover the problem file(s) or folder(s) - it'll be one that won't copy.
Remember, it is vital to make an exact copy of the iPhoto Library Folder on the new machine.
Post back when you've got this done.
Regards
TD

Title and Transition slides lost

Similar Messages

Maybe you are looking for