Title Bar - Show DocTitle only?

How can I set FM8 (Windows) so that the title bar shows only the document title and not the entire pathname?
Thank you kindly,
Elchanan

Thanks for the info, Grundtvig.
The tool-tip works, but takes 2 seconds to appear on my screen, plus one second to get the mouse to that point, times 15 documents open at once, equals up to 45 seconds just to figure out which document to click on, compared to the four seconds it would take if the shortened bars had the basic sense to show the file name. I think I'll go for the Window menu.
They really should have sorted out this obvious interface problem a long time ago, but I'm not sure who "they" are. Is this an Adobe choice or a Microsoft choice to do it this way?
The tabbed bar in FM8 is another possibility, although this takes up the same quantity of screen real estate that the shortened bars take up, and would have been unnecessary if the shortened bars showed the file name as expected in the first place.

Similar Messages

  • IMessage title bar shows contact number only

    With the iMessage, I found if the person is using iMessage instead of text messages, the title bar shows the +1 (XXX) XXX-XXXX number, rather than the contact name, which is already in the contact.  Even I tried to add the number again, it still shows me the number only.  Some people don't have this issue, but I do.  Is there a setting I can change to fix this?  Thanks!

    I am having the same problem, all imessage messages are showing up as +1 (xxx) xxx-xxxx and as a result aren't showing the name.  I have to add that number to the persons name to get the name to show up, but then I have duplicate numbers in my contact details for eacher person, with one with a +1 on it. 

  • Windows moving spontaneously to the screen bottom - only title bar visible

    I have this odd behavior on my MBP after installing Lion.  I'll be replying to a message in Mail or moving a window in finder ... and suddenly the window disappears.  Sometimes I find it down at the bottom left of the screen, with only the title bar showing.  Other times, it will "walk" to the bottom of the screen on its own ... a "stutter step at a time," while I try in vain to stop it.
    In Mail, this will tend to happen if I start typing in the reply before the Genie has openened the message all the way.  In the Finder, it seems to happen if I move a window too quickly to the edge of a screen or across to my second monitor.
    It's slightly maddening, and a real waste of time as I watch helplessly as windows march their way to the bottom of the screen.  Any help is much appreciated.

    Hmmm ... Replying to my own message.
    After booting into safe mode, and seeing no problem, I began adding back my login items one at a time.
    It appears that the issues is with MenuEverywhere and 10.7 or 10.7.1.  Disable ME and all is well.
    I've opened a ticket with Binary Bakery.

  • I just got new lenovo with windows8.1, toolbar for this came with microscopic title bar size

    just returned asus zenbook and bought lenovo yoga, it came with big differnce on title bar font size only on mozilla browser. when i oppened new window, icons on very top right corner (minimize, restore down, close) are microscopic. i know how to enlarge buttons itself and it work , but icons remain same size. Then i downloaded adobe flash player for live streaming. It came with toolbar on the side, which is impossible to read without magnifier. Opened Explorer to compare- everything in normal (large) font . First time i see it, is there any solution?

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    *Use a compressed image type like PNG or JPG to save the screenshot
    *Make sure that you do not exceed the maximum size of 1 MB
    I'm not on Windows, so can't check if this code still works.
    Add code to the <b>userChrome.css</b> file below the default @namespace line.
    *http://kb.mozillazine.org/userChrome.css
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    #titlebar-buttonbox .titlebar-button { height: 24px !important; width: 24px !important; }
    </nowiki></pre>
    The customization files userChrome.css (user interface) and userContent.css (websites) are located in the <b>chrome</b> folder in the Firefox profile folder.
    *http://kb.mozillazine.org/Editing_configuration
    You can use this button to go to the currently used Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    *Create the chrome folder (lowercase) in the <xxxxxxxx>.default profile folder if this folder doesn't exist
    *Use a plain text editor like Notepad to create a (new) userChrome.css file in the chrome folder (file name is case sensitive)
    *Paste the code in the userChrome.css file in the editor window
    *Make sure that the userChrome.css file starts with the default @namespace line
    *Make sure that you select "All files" and not "Text files" when you save the file via "Save file as" in the text editor as userChrome.css.<br>Otherwise Windows may add a hidden .txt file extension and you end up with a not working userChrome.css.txt file

  • Title Bar Modern Apps Missing

    For some reason the Title Bar disappeared when I moved my mouse on top of screen. Instead of the Title Bar shows up the mouse turns into a hand. When I Un-install the KB 9219355 update I was able to bring down the Modern App to close it, but I never get
    back the Title Bar - that have the minimize and the X close button.

    Hi,
    In fact,  after you install KB9219355, the Windows store app is like this:
    The Minimize button, Close button, and taskbar are more available with your mouse.
    This is normal behavior and the feature included in this Windows Update.
    According to your description, it seems that you didn't install this update successfully.
    Please check its status in View installed updates.
    If it failed, please reinstall it for test.
    Karen Hu
    TechNet Community Support

  • Window resized to show only title bar and pushed off screen viewing area

    Anyone else experiencing this strange phenomenon?
    I open some PDF documents, then leave the computer for a few hours.  When I come back, they have all been resized to only show the title bar AND they have been pushed off the bottom left corner of my screen, so that only a tiny portion of the title bar can be seen. I then drag them all back up into view, and resize them so I can read them again.  Give it another couple hours of not being actively used, and they disappear back down to the corner. 
    Very strange Abobe... what's happening?

    Some details would help: operating system, Reader version, a screenshot perhaps: https://forums.adobe.com/thread/1070933

  • Title Bar is showing only ----

    Hello everyone,
    Like the title says, when I open any window (it can be explorer, or simply google chrome), I can see ---- in the title bar instead of what window I am at now.
    I'm not sure if I say it right, but by title bar I mean the text in the bar where _ O X  , "minimize", "full screen" and "close" buttons are.
    My brother may have tried some custom theme, but on the forums there and in description nobody knows what it could cause, and I dont remember doing any system backups so I don't have any. It's really bothering me I want to have my Win 8.1 perfect :o)
    Thanks for answers in advance
    Jan

    Hello Jan,
    Please share us a screenshot to avoid misunderstanding.
    Do you mean you can’t open any windows program like Windows explorer, Chrome browser?
    Can you normally open Control Panel?
    As it may be relate to the third-party theme, If you can open Control Panel, please try to use system restore to help restore Windows back to an earlier point in time.
    For more information, please take a look at the following article.
    http://windows.microsoft.com/en-HK/windows-8/restore-refresh-reset-pc
    If you can't normally use any program like control panel, please try to use safe mode and check if the issue still exists.
    http://windows.microsoft.com/en-hk/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • I want to show the caption in the title bar if the tab bar is hidden.

    Is there any addon or configuration setting that i can use to show the caption in the title bar instead of the tab? I want to do this because i have set my browser to hid the tab bar if only one tab is opened.

    That is what i asked for but is not exactly what i want. I do not want the menubar to be shown at all. I want the tabs in the titlebar (the default behaviour). I want, when only one tab is open to hide the tabbar (this i have already succeded) and to show the caption in the titlebar.

  • Title Bar not showing transparency?

    My title bar is not showing the transparency in leopard. I am wondering if I am the only one experiencing this problem.
    title bar: http://www.flickr.com/photos/14619753@N05/2079776248/in/photostream/
    (I am running on a PPC processor, and maybe that is the problem, I don't know)
    Message was edited by: [Rolamoto]

    This will depend on your computer. I believe the transparent menubar requires "core image" or some other "core" technology, and if your graphics card does not support that technology then it will not do it. The transparent menubar works on my G5 with a Radeon X800XT, but it doesnt work on my PowerBook G4 (Radeon 9000).

  • Show file path in title bar CS3 Mac

    Hi All, Is there a setting to make Dreamweaver CS3 Mac to
    show the full path to the file in the title bar within Dreamweaver
    Code View? Right now it only shows the name of the file. I work on
    very complex web applications, and not having quick access to where
    the file can be found is extremely frustrating, and may cause me to
    use a different editor. Please someone tell me there is a fix for
    this? My web searches turned up nothing.

    There is a widget in the code view toolbar that shows you
    this information
    for all open files.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "jkies00" <[email protected]> wrote in
    message
    news:fui9q4$kk2$[email protected]..
    > Hi All, Is there a setting to make Dreamweaver CS3 Mac
    to show the full
    > path
    > to the file in the title bar within Dreamweaver Code
    View? Right now it
    > only
    > shows the name of the file. I work on very complex web
    applications, and
    > not
    > having quick access to where the file can be found is
    extremely
    > frustrating,
    > and may cause me to use a different editor. Please
    someone tell me there
    > is a
    > fix for this? My web searches turned up nothing.
    >

  • File path in title bar for CF files only?

    G'day
    When I have a CFM or CFC file open in the edit window, its full path - relative to the project - is displayed in the title bar of CFB.  With any other sort of file, just the file name is displayed.
    Now... I seem to recall switching on some "show full path in title bar..." option somewhere, but I'm damned if I can find it now.  That aside, if CFB is going to show the full path for CF files, should it not display them for all files?
    Adam

    There is a widget in the code view toolbar that shows you
    this information
    for all open files.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "jkies00" <[email protected]> wrote in
    message
    news:fui9q4$kk2$[email protected]..
    > Hi All, Is there a setting to make Dreamweaver CS3 Mac
    to show the full
    > path
    > to the file in the title bar within Dreamweaver Code
    View? Right now it
    > only
    > shows the name of the file. I work on very complex web
    applications, and
    > not
    > having quick access to where the file can be found is
    extremely
    > frustrating,
    > and may cause me to use a different editor. Please
    someone tell me there
    > is a
    > fix for this? My web searches turned up nothing.
    >

  • How do I get TITLE BAR ONLY to display for a window (without minimizing the whole window)?

    I want ONLY the title bar to show, then resize to normal then shrink when I ask it to.
    JIM

    Here is an extension that you can control which toolbars show in '''Full Screen''' mode ("'''F11'''), and in what he calls '''zombie mode''' which I would call '''Full Window''' mode ("'''Shift+F11'''")
    This is with Menus showing.
    The title bar will show in zombie mode, not in Full Screen mode ("F11")
    The change that I make in the options myself is that the tabs bar always shows
    I like to see the title bar normally but in either of those two with the tbs bar displayed, I can hover over the active tab to see what the title actually is.v
    KrickelKrackel :: Autohide for Firefox
    :http://www.krickelkrackel.de/autohide/.
    Requires secure server [http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unsecured_updating override], well worth the extra effort to install.
    More information on my page (and alternatives, this is what I want and use)
    :http://dmcritchie.mvps.org/firefox/firefox.htm#autohide
    I display all tabs on the tabs bar such that they do not roll off or scroll across, and I have my tab borders color coded.
    * [https://addons.mozilla.org/en-US/firefox/addon/stylish/ Stylish :: Add-ons for Firefox]
    * [http://userstyles.org/styles/24728/ Tab Color Underscoring active/read/unread (Fx3.6 ) - Themes and Skins for Browser]
    * [http://userstyles.org/styles/9043/ Tabs Bar Minimal Size - Themes and Skins for Browser]
    You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
    <p>There is a lot more beyond those first 10 steps listed, if you want to make Firefox more functional.</p>
    <p><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small></p>

  • Openbox theme only changes title bar?

    Hi! Couldn't find any answer on wiki or google. I don't know if I understand this right, but I installed openbox theme, selected it in configuration but the only thing that changed is title bar, and right click menu. Programs like thunar or leafpad still have gray interface with nice >Link to theme <. I'm guessing that installing theme and selecting it isn't all to it. So what is it?

    Yes, you have to install the openbox theme to have the nice titlebar, but the gtk theme is the one that sets the "look"
    http://gnome-look.org/content/show.php/ … ent=120270
    Here is the gtk theme.

  • Show .ico file on title bar

    How can I show a .ico file on title bar? I have got a code but it shows only .jpg and .gif files on title bar.
    My code is here:
    ImageIcon image = new ImageIcon("symbol.jpg");
    setIconImage( image.getImage() );

    Hi,
    you can't display .ico file, only .gif, .jpg and .png. If there are any other file formats that you will display I don't know. So you have to transform .ico file into one of these formats.
    L.P.

  • Today (6/1) the "My Usage" shows .7GB used (about 1/4 of my 3GB shaded in the bar-graph), and the solid-green in the bar graph representing only 1 day in the billing cycle.

    Today (6/1) the "My Usage" shows .7GB used (about 1/4 of my 3GB shaded in the bar-graph), and the solid-green in the bar graph representing only 1 day in the billing cycle. I'm trying to make sense of it.  My may statement shows 1.7GB - I think that's the period just ended.... and I can't imagine I've used 1/4 of my data already today before noon?  I'm guessing the 'My Usage" screens are not quite coordinated with the billing cycle - anyone else have ideas?

    ... guess the reply via email method doesn't quite work - I'll re-post here via website
    jejm1975
    Thanks for your message, but I don't believe it applies to the situation I described.
    What is described in my post is information from the Verizon website - My Verizon / View Usage. 
    It is not from my phone (which is not a Galaxy,btw)

Maybe you are looking for

  • Problem while deploying webdynpro application

    Hi all,   When i am trying to deploy my application i am getting the following error. Can any  one suggest me why this error is coming, the server is in local host only. The error is Apr 28, 2007 2:52:30 PM /userOut/deploy (com.sap.ide.eclipse.sdm.th

  • Defaulting Page Item Values

    Hi, I am trying to default in a number of page items on the selection of a field value using an LOV - is this possible? For example on the iProc checkout page I need to default in some of the project related fields depending on the project selected i

  • LSMW ME01

    I'm using Recording in LSMW I need to Change fixed vendor flag in ME01 for vendor specific materials , How to pick the vendor form different line items in the recording and remove the flag. Thank You

  • Authorisation combined with document type, activity and status

    I want to create a role for a user who is only allowed to create and change document type ZDI  in status IW . Which object authorization can provided this check ? The object authorization C_DRAW_TCD  control only the activity (create/modify) and the

  • External files are not deployed to target

    I am trying to follow the example in this post where the user specifies a folder in the build specification that has non-LV files.  It contains HTML files that are to be deployed with the project.  It seems to me like a good idea to keep any HTML and