Title set files not in correct physical order

Hi I was wondering if anyone could help. I have had a problem with a replication batch. The dvds play fine on some players but don't on others. The Master was checked for errors and came back as having its "title set files not in the correct physical order, a problem that may effect the playability". The discs were authored in DVDSPro 3 and I didn't think there was anyway to change the VTS order. If anyone can help it would be most appreciated as I need to supply a new ammended master.

15 times, eh, Jake?
I don't think so.
I know the approximate periodicy of this error in DVD SP generated output, and it's extremely rare. In fact, this "Title Set not in the correct order" rule (ID 420) of ImageAnalysis is listed by Eclipse as a DVD-Audio error.
In fact Dale, if you'd like, contact me through my website link below and I'll help you get this next submission perfect, at no charge - in exchange for letting me see just what the heck you did to that original Image!
You really need to let DVD SP generate a DDP Image and submit this next one already tested with Eclipse, and on DLT.
Let me know,
Trai
Trai Forrester
TFDVD Research Labs
http://www.DVDVerification.com

Similar Messages

  • Title & Menu Buttons not working correctly on remote control/ set top player but work in preview.

    Title & Menu Buttons not working correctly on remote control/ set top player but work in encore preview. This only happens for a Blu ray project. When a user presses the menu button it should go to the previous menu they were on but it goes to the main menu. When they press the title button they should go to the main menu but it doesn't do anything. My DVD projects work as expected.I've tried creating a new "test" project with different footage and still get the same undesirable results.
    Overrides grayed out and set to "not set" for timelines and menus.Project settings and build are set to blu ray. Also I've noticed when I preview a Bluray project the preview window shows a red colored disc next to the Title button when viewing the timelines and green when playing the menus but not so for a DVD project it displays red if motion menus and or timelines are not rendered/encoded. I'm not using motion menus and all the media is encoded according to the project specs.
    I've searched this forum but couldn't find the answer. Any help or redirects to a solution would be appreciated. Working with CS5. Thanks.

    I found out on my Samsung Blu ray player the remote has a tools button on it that brings up audio, angle, chapter selection etc.and also title selection which is actually the menus and the timelines unfortunately. It's not as easy or direct as last menu selected but it's a workaround at least. I also plan on using a pop up menu. I'll let you know.

  • Why is my .psd file not rendering correctly in ae

    Some layers of the .psd document are not rendered correctly. However they are imported.
    The strange thing is that when I first move from Photoshop to Illustrator, save it as an .ai file it is rendered properly (in Ae).
    I am kind of clueless as to what is causing this issue.
    Kind regards,
    Jelle

    Okay if more information is needed, i'll provide. However you may disregard my initial comment about illustrator. It flattens the photoshop layers so I do not have any flexibility in After Effects. In other words, my main question remains: why is my psd file not rendering correctly in ae?
    Further details:
    -photoshop cc and after effects cc.
    -macbook pro retina
    If still not clear enough, please tell me what details you are looking for furthermore

  • HELP....AVCHD / MPEG files not playing correctly!

    I have been trying to download video that was shot with the new Sony FS100 camera that I'm told are AVCHD or MPEG files to my older Adobe Premiere Pro 1.5 timeline, but they are not playing correctly. When I reverse the field dominance, the image plays better but the sound is strange (I was able to speed the sound to 450% and it worked better, but then the balance of the sound from the clip is lost somewhere.).
    Any suggestions to make these files play and work correctly? I tried converting them to AVI files but that showed up completely black on the timeline! Anything I've tried either affects the video or audio negatively!  I try either makes the image play or stutterThis was shot in regular SD format, NOT HD, so they should be able to play on  a standard timeline. Can anyone suggest anything to help please? Much appreciated!

    Thanks for your reply, I ran it through Media Info. Here are the results:
    Container & general information:
    MPEG-PS: 290 Mib  4min22s
    1 Video stream: MPEG video
    1 Audio stream: AC-3
    First Video Stream:
    8833 Kbps, 720*480 (4:3), at 29.970 fps, MPEG video (NTSC) (version 2) (Main@main) (Custom Matrix BVOP)
    First Audio Stream:
    256 Kpbs, 48.0 Khz, 16 bits, 2 channels, AC-3 (DVD-Video)
    Please let me know where to go from here. Thanks so much!
    Date: Fri, 11 Nov 2011 10:50:15 -0700
    From: [email protected]
    To: [email protected]
    Subject: HELP....AVCHD / MPEG files not playing correctly!
        Re: HELP....AVCHD / MPEG files not playing correctly!
        created by Ann Bens in Premiere Pro CS4 & Earlier - View the full discussion
    Welcome to the forum.A screendump of what these SD files exactly are would be very nice.Run them throught Media info.http://mediainfo.sourceforge.net/en
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4020725#4020725
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4020725#4020725. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • File not formatted correctly error

    Dear All,
    when am trying to import a contract file as excel sheet, not CVs file, i get the error ( File not formatted correctly ). any advice?

    the issue with date formatting would be corrected in Excel. When an export file that includes dates is opened in Excel, they get reformatted by the Excel program. In my experience, I have had to reformat those cells in Excel to the YYYY-MM-DD format and save the Excel file before I could import again into CM. But, if you are just exporting and then importing without opening the file in Excel, then the dates are not the problem. What are you exporting from CM? Are you trying to import into a different project or database than you exported from?

  • Trimmed Quicktime Time code Media Files not reading correctly in CS5+ (works in CS4).

    I'm using Prores footage with metadata Timecode inserted into the Quicktime file.  Then I edit the Quicktime file, click "Save" and then import the trimmed file into APP CS4.  CS4 recognizes the edited clip and displays the timecode correctly (adhearing to the trims made on the file with Quicktime).
    BUT, in CS5, when I use the SAME clips, the timecode displays what the untrimmed timecode on the trimmed image.  So now, my timecode is OFF. 
    Really want to figure out how to fix this.  Does CS6 fix this issue?  Is there a preference or custom setting I need to select in order to have CS5 adhere to the metadata stored in the Quicktime file's timcode information?
    Any help would be greatly appreciated!

    There is a difference between Save and Save As in QuickTime Player. When you Save after trimming, the trimmed data remains in the file and takes up the same amount of space as before. When you Save As, the trimmed data is not included and you end up with a smaller file.
    I don't know why CS5 is behaving differently but it's more efficient to Save As and it will solve the CS5 problem too.

  • In FTP server file not storing in proper order when 'FTP_R3_TO_SERVER'

    Dear ,
    when i used FTP_R3_TO_SERVER to download data in FTP server 
    i checked in FTP server  file is not storing in proper order in FTP server . plz help how to get the file in proper order .it urgent . full points must be given. i given code below .
    DATA : BEGIN OF iresult OCCURS 5,
    rec(450),
    END OF iresult ,
    DATA :
    dest LIKE rfcdes-rfcdest VALUE 'SAPFTP',
    compress TYPE c VALUE 'N',
    host(64) TYPE c.
    DATA: hdl TYPE i.
    DATA: BEGIN OF result OCCURS 0,
    line(100) TYPE c,
    END OF result.
    DATA : key TYPE i VALUE 26101957 ,
    dstlen TYPE i,
    blob_length TYPE i.
    host = p_host  .
    DESCRIBE FIELD p_password LENGTH dstlen IN CHARACTER MODE.
    CALL 'AB_RFC_X_SCRAMBLE_STRING'
    ID 'SOURCE' FIELD p_password ID 'KEY' FIELD key
    ID 'SCR' FIELD 'X' ID 'DESTINATION' FIELD p_password
    ID 'DSTLEN' FIELD dstlen.
    CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
    user = p_user
    password = p_password
    host = host
    rfc_destination = dest
    IMPORTING
    handle = hdl
    EXCEPTIONS
    not_connected = 1
    OTHERS = 2.
    IF sy-subrc = 0.
    CONCATENATE 'cd' ftppath INTO ftppath SEPARATED BY space .
    CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
    handle = hdl
    command = ftppath
    TABLES
    data = result
    EXCEPTIONS
    command_error = 1
    tcpip_error = 2.
    IF sy-subrc = 0 .
    CLEAR result .
    REFRESH result .
    CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
    handle = hdl
    command = 'ascii'
    TABLES
    data = result
    EXCEPTIONS
    command_error = 1
    tcpip_error = 2.
    IF sy-subrc = 0 .
    DESCRIBE TABLE iresult LINES lines.
    blob_length = lines * width .
    clear : lines.
    Delete the existing file
    CONCATENATE 'del' ftpfile INTO delfile SEPARATED BY SPACE.
    CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
    handle = hdl
    command = delfile
    TABLES
    data = result
    EXCEPTIONS
    command_error = 1
    tcpip_error = 2.
    *End of deleting the existing file
    CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
    handle = hdl
    fname = ftpfile
    blob_length = blob_length
    TABLES
    blob = iresult
    EXCEPTIONS
    TCPIP_ERROR = 1
    COMMAND_ERROR = 2
    DATA_ERROR = 3
    OTHERS = 4.
    IF sy-subrc 0 .
    WRITE 'Error in writing file to ftp' .
    ELSE.
    WRITE 'File downloaded on the ftp server successfully'.
    ENDIF.
    ENDIF.
    ELSE.
    WRITE : 'Path on ftp not found : ' , ftppath .
    ENDIF.
    CALL FUNCTION 'FTP_DISCONNECT'
    EXPORTING
    handle = hdl.
    CALL FUNCTION 'RFC_CONNECTION_CLOSE'
    EXPORTING
    destination = 'SAPFTP'
    EXCEPTIONS
    OTHERS = 1.
    ELSE.
    WRITE 'Could not connect to ftp' .
    ENDIF.
    ENDFORM. " FTPFINANCEACCESS_DOWNLOAD
    AT SELECTION-SCREEN OUTPUT.
    LOOP AT SCREEN.
    IF screen-name = 'PASSWORD'.
    screen-invisible = '1'.
    MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    Edited by: manoj kv on Feb 27, 2008 12:55 PM
    Edited by: manoj kv on Feb 28, 2008 5:37 AM
    Edited by: manoj kv on Feb 28, 2008 5:39 AM
    Edited by: manoj kv on Mar 5, 2008 2:15 PM
    Edited by: manoj kv on Mar 7, 2008 12:51 PM

    Hello,
    Did you try to put 'X' to the parameter CHARACTER_MODE.
    Hope it will help you
    Olivier

  • Colors in pdf files not displayed correctly on linux acroread

    I have recently observed that the colors in certain pdf files are not displayed correctly in acroread on Linux. Other readers such as evince get it right. Examples are a presentation with white arrows on  a black background which come out as black on black. I suspect, but have not proved, that the files were produced on Mac OS. I see this in acroread version 9.5.1 on a couple of versions of Linux. I googled this but could find no-one else mentioning it. Has anyone else seen it. Looks like a serious bug to me.

    Does this happen with other PDFs on the server? You might check out the Adobe forums.
    Regards, Tim

  • Uploaded image files not displayed correctly

    Hello everyone,
    I used the following article(on o'reilly) as reference for file upload:
    http://www.onjava.com/pub/a/onjava/2001/04/05/upload.html?page=1
    While it works fine for most files types, there are problems with image files.(I am using PrintStream, BufferedOutputStream,FileOutputStream to write the files on the server).
    When links to these image files are clicked, the uploaded gif and jpeg image files are not displayed correctly.When directly opening the files on the server, it gives a 'error opening file' message.But other word docs , text files do not give an error.
    If anyone else has come across the same problem and could help out , I would appreciate it.
    Thanks in advance.

    I do not want to enter into the logic which you are following to upload the file. I did the upload process successfully even as a blob datatype.
    For this I followed the logic given in http://www.java.isavvix.com/codeexchange/codeexchange-viewdetail.jsp?id=22.
    Here you can download the complete sourse code, which is working fine for gif and jpeg, I tested.
    Please go with this. Also let me know, if you still have problem.
    Regards.

  • I tunes update 10.5 and music files not playing correctly

    After I updated iTunes to 10.5, a vast majority of my music files do not play correctly. When they do play, they sound as if they have been super compressed and I cannot figure out why. I have un installed/re installed, checked all of my drivers and even scanned my library for viruses. Is there anyone who may have any info that may help fix this problem? I would be eternally grateful.

    I have just downloaded a free program called burn and it burns music perfectly and yet itunes still wont work and comes up with the same error report as above so i do hope this helps apple to fix the bugs in there latest 10.5 itunes update.

  • File not converting correctly

    I downloaded a file several time to convert PDF to Excel.  The first line of the file is converted correctly and all subsequent lines are put in column A only and not separating into columns A thru F.

    I got it.....
    Thanks,
    Niki Shah

  • CS3 FW drop down menu files not eporting correctly

    Drop down menu files are not exporting correctly.
    Here's what happened:
    1. I did a file save as to the PNG file (from subban11.png to
    subban12.png)
    2. Made changes to the drop down menu
    3. Eported the file with the new name subban12
    The result:
    1. The html file was named correctly as subban12.html
    2. All the supporting .gif files still had the old file name
    (subban11... )
    3. A new subban12.css file appeared that had never appeared
    before when exporting
    4. A new mm_css_menu.js file also appeared
    Is there fix for this problem or has my .png file corrupted?
    I did export a different .png drop down menu file and
    everything worked properly.

    Renee@CoP wrote:
    > Hi Linda,
    >
    > Thanks for your reply. I'm pretty sure that I did not
    change the format to
    > CSS menus. I exported like I always do (control, shift,
    x) without changing
    > any of my settings. Could you let me how to export in
    CSS format, so that I
    > know what to avoid?
    >
    > Thx, Renee
    Hi Renee,
    I'm not presently working on a machine that has Fireworks CS3
    installed
    on it. From memory, choose File > HTML Setup. Under
    General, check Use
    CSS for Pop-up menus, and Write CSS to an External file.
    Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
    http://www.projectseven.com
    Fireworks Newsgroup:
    news://forums.projectseven.com/fireworks/
    CSS Newsgroup: news://forums.projectseven.com/css/
    http://www.adobe.com/communities/experts/

  • RAW files not importing correctly into iPhoto

    I'm having problems importing .CR2 files into iPhoto. This didn't used to happen with Tiger, so I'm trying to figure out what the issue is. I'm using iPhoto 7.1.1 (354) with Leopard 10.5.1. I previously had 10.4.8.
    I'm wondering if it's an issue with networking. Currently, my iPhoto Library is on a NAS because it's big (about 86GB) and I have RAID redundancy on the NAS. The original files are fine, but the imported files (not just the thumbnails) are corrupted. If there's a problem with data transmission, would that show as a data corruption?

    Michael
    I don't have a NAS myself and my ignorance of it and networking one is pretty much total. However, this thread
    http://discussions.apple.com/thread.jspa?threadID=1100543&tstart=0
    records a discovery by one user using a similar system. It has to do with iPhoto using ':' for temp files and folders, and Samba having a problem with the character.
    Hope that helps.
    Regards
    TD

  • Downloading file not the correct contents

    Hi,
    I have a link on another page the take me over to the page that contains the code below:
    <CFOUTPUT>
    <CFSET FPATH = #GetDirectoryFromPath(ExpandPath("*.*"))#>
    <cfdirectory directory="#FPATH#" name="FILES" action="LIST">
    <TABLE>
    <CFLOOP Query="FILES">
    <TR><TD>
    <CFIF #FILES.NAME# EQ "test.cfm">
    <A href="#FILES.NAME#"> #FILES.NAME# 
    <cfheader name="Content-Disposition" value="attachment;filename=#FILES.NAME#">
    </A>
    </CFIF>
    </TD>
    </TR>
    </CFLOOP>
    </TABLE>
    </CFOUTPUT>
    When I select the test.cfm link, a dialog box appears asking to either Save or Open the file.
    The issue is the file, test.cfm, contents is not what is being saved or displayed when Open is selected.
    Is there something I'm missing?
    Thanks,
    Mike

    I am trying to download a text file, not a cfm file.
    Mike

  • KM, HTML file, Not rendering correctly

    Hi Everyone
    I have an html file that is stored in knowledge management.  The html file references few folders/images that are also stored in KM. When I create a KM Document iView, the HTML file shows; however, the various images/style sheet that is stored along with the html file KM do not appear.  Thus the html file is not rendering properly. 
    With this being said, I can create an URL iview and everything works as it should (the html file appears correctly with the necessary images).  The problem is that I am developing a solution for an external and internal facing portal, thus the URL iView option is not going to work for me.  I need to have a way for this KM html iView to display properly...perhaps with the KM Document iView template.
    Has anyone encountered an issue such as this and can offer assistance.  Again, the KM Document iView template will work, if the html file it is calling in KM can correctly reference other folders in KM that contain various images/style sheets that are a part of the html file.
    Any help is greatly appreciated.
    Best Regards,
    Scott

    Hi Scott.
    In order to solve your problem with relative links to image and css files inside KM I suggest two variants:
    1. Replace relative links as I mentioned in this message Re: JavaScript and CSS info in WPC.
    2.The second solution is:
    a. Create an blank html file inside KM folder where the base.html file is stored.
    b. Download the newly created file for local editing.
    c. Place an iframe that points to your base html file between <BODY></BODY> tags. Use a following code as an example:
    <iframe width="100%" height="100%" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" src="base.html"></iframe>
    d. Upload this file back to KM.
    e. Point your KM Document  iView to the created html file.
    Best regards,
    Aliaksandr Zhukau
    Edited by: Aliaksandr Zhukau on Dec 3, 2009 11:04 AM

Maybe you are looking for