Title/text effects just for one line?

Hi!
As far as I understood do the PE11 title/text effects work just for one line of text.
(1) How can I produce more lines text-effects with PE11 (and more complex, like 3D-animations)?
(2) If this is not possible, do you know any free/beginners software for doing that?
I look forward to reading your answers!
Best wishes,
Ronald

Ronald,
You are most welcome.
I am not sure what the limitation to one line of text is related to - the program coding? The animation algorithms? However, with a bit of planning, there are several ways around that limitation, but it throws people, when they first encounter it.
This article also has some tips on using Titler in Premiere (both Pro and Elements), and I have added some Adobe TV tutorials. Note: they are done in PrPro, so the interfaces will look differently, plus PrPro's Titler has some additional functions, that are not yet in PrE. Still, the basics are all the same, and I think that with a bit of interpolation, even the PrPro tutorials will be useful: http://forums.adobe.com/thread/1131177
Good luck, and happy titling,
Hunt

Similar Messages

How do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that,

how do I create 2 motion tweens for one line of text? the text needs to "fly-in-right", I can do that, then it needs to "fly-out-bottom" again, I can do that, but not on the same line of text...any ideas...

my question
1- there is any way to assign the Fetch process to specific region so the process take all item in these region only.
2- how can create manual process to fetch row into specific items in page ( i tray these code
SELECT col1, col2, col3 ....
INTO :P1_ITEM1, :P1_ITEM, :P1_ITEM...
FROM table
WHERE id = :P_id ) but no data retrieve .
I do not think that it is possible to have more than one Automated Row Fetch process in a given page. See the thread:
ORA-01403: no data found : Unable to fetch row multiple automated row fetch
On your second question, the manual process should work provided:
P_ID has a value when the process executes. You can do it this way:
i. Make this process as a on-load After/Before header process
ii. Make sure that P_ID page item has value when the process executes (set it from another page or before the pl/sql process executes)

Output not getting proposed from a Purchase Order just for One vendor

Hi All,
We have an issue where in we have maintained a condition record with the access as "Purchase Doc type (NB) and Purchase Organization(XXXX):" pointing towards a "LS" partner function (ALE) and "4"
We have also maintained Partner configuration correctly. The issue which happens only in Production and not in TEst systems which is " only for ONE VENDOR the output is not getting proposed and for the other vendors it is getting proposed correctly. We also have a requirement attached to the Output and we do not have any vendor specific logic.
We also checked /Compared both the test and production system on Output Configuration as well as master data for VEndor and Info records and they seem to be ok.
Does any one faced a similar situation why an Output would not propose just for one specific vendor?
Would appreciate if any one can reply asap.
Thanks,

Then check with the requirement you are using bd64 is distribution model.
Check with ur output type, requirement and output determination. ale service comes only in picture partner profile with outbound parameters.
have u done the correct entries under message control in outbound parameters.
thanks
Aman

One PR for one line item in third party sales

Hi all,
When we create and save a third pary sales order, the system will create a Purchase Requesition.
If there are 5 line items in the Sales Order, the system will create only one PR for all the line items.
I will create only one sales order, and I want one PR for one line item of the sales order.
How to Configure this.
Regards
VASU

Vasu,
PR in the sales order is generated by the settings in Schedule line and Item category. In a particular sales order, if there are 5 line items and of same item category and schedule line then system will give only one PR number. Again if the item category ans schedule line is different then there will be multiple PRs.
Can you please elaborate more on your requirement. Again from one PR you can generate multiple PO
Thanks,
Raja

APPLY stream in ABORT state just for one error ?

Hi,
When there is an error, the APPLY process appears ABORT in the EM console, and I have to restart it after cleaning the errors.
So, it means the APPLY process no longer run...
My idea was that the errors would fill an error queue while other successful events would continue....
If it fails in production just for one error, it's not quite acceptable....

You must use something like:
begin
dbms_apply_adm.set_parameter('APPLY_NAME', 'disable_on_error', 'N');
end;
The default is 'Y', that's why it stops.
See:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_apply.htm#i997629
Regards,

I'm really sorry i just bay my griAddress again to my phone please grindar extra just for one month and you charge me for one year so i would like to cancel that transaction and pay only monthly many thanks marcel

I'm really sorry i just bay my griAddress again to my phone please grindar extra just for one month and you charge me for one year so i would like to cancel that transaction and pay only monthly many thanks marcel

These are user forums. You are not speaking to Apple. We can't assist you. You must contact Apple directly in your country.
Customer Service: Contacting Apple for support and service - this includes international calling numbers.

Moving the 80 Million records from Conversion database to System Test database (Just for one transaction table) taking too long.

Hello Friends,
The background is I am working as conversion manager and we move the data from oracle to SQL Server using SSMA and then we will apply the conversion logic and then move the data to system test ,UAT and Production.
Scenario:
Moving the 80 Million records from Conversion database to System Test database (Just for one transaction table) taking too long. Both the databases are in the same server.
Questions are…
What is best option?
IF we use the SSIS it’s very slow and taking 17 hours (some time it use to stuck and won’t allow us to do any process).
I am using my own script (Stored procedure) and it’s taking only 1 hour 40 Min. I would like know is there any better process to speed up and why the SSIS is taking too long.
When we move the data using SSIS do they commit inside after particular count? (or) is the Microsoft is committing all the records together after writing into Transaction Log
Thanks
Karthikeyan Jothi

http://www.dfarber.com/computer-consulting-blog.aspx?filterby=Copy%20hundreds%20of%20millions%20records%20in%20ms%20sql
Processing
hundreds of millions records can be done in less than an hour.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How to trigger Condition Access sequence multiple times for one line item?

Hi,
We have a situation that, User will enter a Promo code (custom Field) in Sales order Header Additional data B tab to apply discount for line items.
Logic goes like this:
1. For each Promo code .. there may be multiple sale deals (Max 3 at this point).
2. For each line item (refering to tkomp table) we have to apply the sale deals (found above) the Condition access sequence will pick the right sale deal to apply the line item.
3.we have enhanced the tkomp structure to hold the sale deal.
Challenge:
As we have the standard logic to trigger the condition access sequence once for each line item, how we can apply 3 sale deals for single line item. Is there any logic or way to trigger the condition access sequence multiple times for single line item with diffrent sale deals. ~ There may be one valid sale deal for one line.
Functional team maintained diffrent access tables in the access sequence!!!
Fnds, please help me to get some clue
Thanks,
Sunil Y

Hi Eduardo , Thanks for the response.
I am trying to explain again, this is the requirment given by the functional guys.
we have Promo code in Hearder Addtional data B tab --> Have to retrieve Sale Deals -->
At this point of time we may have at max 3 Sale Deals. we don't know which sale deal is vallied for which item we have in TKOMP. We have enhanced the TKOMP structure to hold one sale deal only (ZZPROMO).
We have enhanced USEREXIT_PRICING_PREPARE_TKOMP in RV60AFZZ to populate the value in TKOMP. Then it will go for diffrent access sequence to find the proper condition.
Our challenge is that, for each line item we have 3 sale deals, we don't know which one is valid for which line. but we have to apply the vallied sale Deal to the line items. Line item 10 may have Sale Deal 2 , item 20 may have Sale Deal3 and 30 may have sale deal 1.
We may have solution, by fixing some thing in the code or through config. But i am confused that is it a valid requirment?
Please help me ...
Thanks,
Sunil Y

How to change a item property just for one record

Hi,
My Requirement is, when a new record is inserted i want item1 to be enabled(which is disabled by default) only for this new record. when I implement the following code, entire column is enabled intead of just for one record.
The code I have written in WHEN-NEW-RECORD-INSTANCE trigger is
app_item_property.set_property('block1.item1', ALTERABLE_PLUS, PROPERTY_ON);
app_item_property.set_property('block1.item1', ENTERABLE, PROPERTY_ON);
please help!
Thanks
Sunny

The code I have written in WHEN-NEW-RECORD-INSTANCE trigger is
app_item_property.set_property('block1.item1', ALTERABLE_PLUS, PROPERTY_ON);
app_item_property.set_property('block1.item1', ENTERABLE, PROPERTY_ON);What is APP_ITEM_PROPERTY? This is not a Valid Oracle Forms Built-in. I don't see how your When-New-Record-Instance (WNRI) trigger will compile.
To change the properties of a specific instance of an item you would use the Set_Item_Instance_Property built-in and then there are only a few properties you can change; which are: BORDER_BEVEL, INSERT_ALLOWED, NAVIGABLE, REQUIRED, UPDATE_ALLOWED and VISUAL_ATTRIBUTE. To make a specific instance of "ITEM1" Insertable and Updateable you would use the following:
Set_Item_Instance_Property('YOUR_BLOCK.ITEM1', CURRENT_RECORD, INSERT_ALLOWED, PROPERTY_TRUE);
Set_Item_Instance_Property('YOUR_BLOCK.ITEM1', CURRENT_RECORD, UPDATE_ALLOWED, PROPERTY_TRUE);However, if you have set the ENABLED property of ITEM1 to NO in the Forms Builder, you will not be able to "Enable" the item using Set_Item_Instance_Property. You will need to make the item Enabled and set the INSERT/UPDATE properties to NO.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

SPA525G permanent CLIR for one line

Hello,
how is it possible for one line (not for all) to set up a permanent suppression of the Caller ID. I can not find it in the settings. I can find only the suppression of all line.
Who can help me?
regards
Daniel

Hi,
thanks for the reply. Does not seem to work. In the PBX (AVM FritzBox) , I can not suppress the phone number for this line. If I use the code *31# or #31# on the SPA525, it tells me unknown number. On ISDN or DECT terminal it works. Note If the unknown number from the SPA525 or the PBX?
Sorry for the bad English!
greeting

How do I change an Apple ID just for one device, an iPod Touch?

Hello, all...I recently purchased my nephew (I'm his guardian and am raising him) a brand new iPod Touch for his 13th birthday. I activated the device using my Apple ID (which I also use for my iMac, iPhone and Macbook Air). I'm thinking now about changing his iPod over to a different Apple ID to keep my iCloud "pure" (for lack of a better word), with just my stuff on it, and because his iPod is mysteriously picking up text messages to me that are supposed to go to (and which still do go to) my iPhone. Is it possible to change the Apple ID for just that one device, the iPod and, if so, how does one do that? I have several e-mail accounts/addresses that I could use instead of the one I use for my current Apple ID. I'm technology-challenged in the worst way, so your help/advice is greatly appreciated. Thanks!

CHANGE ID
The ID is used in the following locations and you have to change them.
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
Settings>iCloud
and Settings>iTunes and App store
You have to sign out of ID (for iCloud you delete the iCloud account from the iPod) and sign in with other ID.
Note the following are resolved if you use Family Sharing (iOS 8 and later):
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.
If the iPod has iOS 7 or later then you have the enter the password for Apple ID presently sign in Settings>iCloud.
Also, a Restriction can be set (Settings>General>Restrictions) the prevents changing accounts

Utility to send text file over GPIB, one line at a time?

We are developing instrumentation that receives data and commmands over GPIB as plain text, and returns them as well. I'd like to create GPIB "batch" files and send them over the bus, one line at a time, so I can debug the instruments' behavior. I'd also like to be able to read back responses, one line at a time.
Is there such a utility? I've got our programmer working on something like this, but I'd hate to have him re-invent an existing wheel.
Thanks!

Apart from NI-SPY, I have not heard of such a utility. This may be simple to implement using proper termination. If the instrument is capable of sending line feeds or carriage return, you should be able to easily create a document. Also, using IBWRTF, you could write the ASCII file (containing the termination characters) to the bus. Depending on how you have your timeouts specified, this may be ideal.
Alternately, if you read a static amount of data, you could IBRD chunks of data. the result may need editing for broken words at the end of a line but would achieve such a result.
Ryan Mosley
National Instruments, Applications Engineer
http://www.ni.com/exchange

Multiple account assignment category for one line item in PO

Dear Experts,
We are on SRM 5.0 ECS
One line item of a PO has multiple account assignment category with the cost distribution for
1. Cost Center - 50%
2. Order - 50%
Is it possible?
As per my understanding one line item in a PO can have only one account assignment category
Regards
Mick

Hi,
Yes it is possible by Po line item.
Just go to transaction bbp_poc through the web interface.
Select your PO
Select your line item PO.
goto the account assignment tab (item overview)
you get a cost distribution field in percentage
then you get a cost distribution button : click it and you get several lines where now you can split your 100% in as many lines as you want.
BR,
Disha.
Pls reward points for useful answers.

Classic - text ringtones work for one contact but not for others

Just got the new Blackberry classic. I'm having trouble with the ringtones for the text messages. The custom ringtone works for one contact but not for the others. I have taken the same custom ringtone that works for contact A and used it for contact B but it only works for A. B sounds the default ringtone from the default profile instead of the custom ringtone.
I have deleted all contacts and done a re-sync thinking something was corrupt. That didn't work.
None of the contacts have a link.
I have changed the notification profile and it still doesn't work.
I have deleted a contact and recreated it manually. It still doesn't work.
I finally deleted my dad's contact and from the phone app created a new contact. I set a custom ringtone for him and it worked. I of course had to recreate all his other information manually. Please tell me there is some other way to fix this than recreating manually all 147 contacts in my contact list.
I read that if the phone number has the hypen or space it won't work, but my dad's contact info that I created from the phone app has the hypen and it rings with the custom ringtone. Also contact A has no hypen in the phone number and it rings the custom ringtone. So that didn't seem to matter.
I have spent hours on Google and see that lots of people have had this problem (but not everyone) but have not yet found a solution.
Surely someone has found a fix for this issue.

Make sure that the contact has "Mobile" as the field for her number and not "iPhone".
Note that the iPad cannot send SMS messages.

SD / Third Party Sales / 2 line items in PR for one line item in Sales orde

Hi
In a third party scenario, I have item category TAS .When I create a sales order, there are 2 Schedule lines for the item. The first SL has confirmed qnty as 0 and the second SL has confirmed qnty as full quantity ( say50). When I save the sales order, it creates a PR as expected. However the PR has 2 line items for this single line item of SO. Each PR line items have the same quantity, in this case 50. Why is this happening. Is it due to some configuration.
All my SD configurations are fine for third party process. Please let me know if somebody faced this situation and solved it.
In crux, one line item in third party process leads to 2line items in PR , each with the quantity as mentioned in teh confirmed schedule line.

Yes interesting to see multiple scheudle lines during TAS processing.
Also please check the scehdule line category. Should be CS. Also check the MRP type in your material.
CS should have Order Type = NB , Item category = 5, Acct Assign Category = 5, incompletion = 31. Rest all fields should be blank or unchecked.
Pur Requisition will be based on the scehdule lines. Since there are 2 schedule lines, you have two line items in the purchase requisition. If you can fix the multiple schedule lines problem in your order, then your requisition looks good.
Please check note 210417 reg av chk for TAS.
Regards
Sai

Title/text effects just for one line?

Similar Messages

Maybe you are looking for