Titler Crashes - Vista SP1

I have a brand new DELL XPS 420 4GB ram - Quad Core. (RAM is optimized). The titler crashes when I scroll through the fonts. Always at Daunpenh, or backward at Earwig factory. I have deleted every font that Windows will allow me to, within that range. Premiere Pro no longer crashes.
Due to a crashed hard drive, this is actually the second fresh install I have had to do on my XPS 420 and both times I have had to remove the fonts that fall within that range. Does anyone know which font in particular it is?? It is far too frustrating to go through one by one to figure it out. I feel luck that I was able to narrow it down as much as I did.
Does anybody have any thoughts on this? Is Windows sending out a corrupt font in their operating systems? Why don't Photoshop or Flash crash with this font? What's up with Premiere Pro? Any ideas?
BTW, I'm using Production Premium CS3.
Thanks,
Jimmy

Jimbo,
The Titler is very picky about fonts. Much more so than other Adobe programs, like PS, AI and InDesign. You likely have a corrupt font, or two, and it chokes Titler.
I use Extensis Font Doctor (stand-alone, or as part of Suitcase), to repair, or remove any corrupt fonts, if it cannot exact a repair.
You could Move half of your fonts to another folder (basically uninstalling them, but get them out of Windows). Test PP and Titler. If it works, then you can be fairly certain that your corrupt font(s) are in the half you removed. Reinstall half and test. If still OK, reinstall half of the remainder. So on, and so forth. This can take a lot of time, depending on the number of installed fonts.
You seem to have a handle on some possibilities and I'd start by Moving those, plus maybe a couple around them (in alphabetic order), and test. If all is well, then reinstall those around the suspect fonts. Test. If still OK, try the suspect fonts, and test.
You see why I first opt for Font Doctor?
Good luck,
Hunt

Similar Messages

UNABLE TO DOWNLOAD VISTA SP1

AFTER RE-INSTALLING VISTA BECAUSE OF A CRASH,VISTA SP1 WILL NOT INSTALL.DOWNLOADED BUT DID NOT INSTALL

Hi PRICEJOE,
Based on your description, this question is related to Windows Vista. As Milos mentioned, you post the question in wrong forum. I suggest that you would post the question in
Windows Vista IT Pro forum or
Windows Vista Community. I believe we will get a better assistance there.
Meanwhile, please refer to that KB555375 as Milos suggested before asking a question on help forums.
If any update, please feel free to let us know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

ITunes always crashes on close Vista SP1

I'm running Vista SP1 with the latest version of iTunes. Everytime I close iTunes I get an error message that iTunes has stopped working. I've tried reinstalling itunes and I've reinstalled Vista, but this only briefly fixes the problem. After the first time that iTunes crashes after the new install I get this message again. I would appreciate any help.

If you don't have an itouch or iphone, uninstall AppleSoftware Updater and Bonjour from Control Panel > Add/Remove programs. SOme folks have had luck with that.
Info on those programs:
http://docs.info.apple.com/article.html?artnum=302488

PC SUITE 6.86.9.3 Vista SP1 Crash

Hello I really like the new look of the PC Suite, but I have a problem ... I recently installed SP1 for Vista. I have Nokia N70 ME and its was paired with my Sony VAIO VGN-CR190 over bluetooth. I had no problems with the previous version of PC Suite (6.84) and Vista SP1. My bluetooth stack is Toshiba v. 5.10.04(SO).
The problem comes when I pair my phone over bluetooth and I try to access it I am getting an error. Here is the log from the Windows Event Viewer:
Fault bucket 701006833, type 1
Event Name: APPCRASH
Response: None
Cab Id: 0
Problem signature:
P1: NclToBTSrv.exe
P2: 7.0.2.0
P3: 47be61ca
P4: ntdll.dll
P5: 6.0.6001.18000
P6: 4791a7a6
P7: c0000005
P8: 0003ed26
P9:
P10:
Attached files:
C:\Users\Denis\AppData\Local\Temp\WER9FE9.tmp.version.txt
These files may be available here:
C:\Users\Denis\AppData\Local\Microsoft\Windows\WER\ReportArchive\Report0af3c3ec
Any help will be appreciated. I'm not in a hurry because I have a card reader, but sometimes I'm too lazy to take the card out just to trnsfer one picture.
Faulting application NclToBTSrv.exe, version 7.0.2.0, time stamp 0x47be61ca, faulting module ntdll.dll, version 6.0.6001.18000, time stamp 0x4791a7a6, exception code 0xc0000005, fault offset 0x0003ed26, process id 0x14f4, application start time 0x01c8c49a95fe99b2.
Message Edited by denis4o on 02-Jun-2008 01:50 PM
Message Edited by denis4o on 02-Jun-2008 01:51 PM

I have the same problem, and the funny thing is, the Bluetooth dongle works fine with my old Sony Ericson phone. So the problem must be the Nokia Suite?

Vista SP1 causes crash on 3000 N200

Hi all! I loaded Vista SP1 three times. The first two times caused a boot up error after installing segment 2 of 3. I was able to get going again by using rescue and recovery and picking a restore point. The last time I tried to load it I unistalled my antivirus first, diabled my firewall and crossed my fingers and my toes while holding my breath...to no avail. I lost EVERYTHING. Ahhhh, Microsoft. Rescue and recovery gave me no restore point. I had to do a total restore. So here I am again, still no SP1 and in need of some help. What am I doing wrong? I mean, it couldn't be Microsoft, right? <wink> Any ideas?
p.s. I emailed Microsoft and Dipti sent me a link to SP1. Thanks for the support. I'll say it again, Ahhhh, Microsoft.

The printer is on the network, so it's directly to IP address.
The driver was installed as admin user
No problem with the printer for >8 years.
No other vista systems.

Outlook 2003 on Vista SP1

Hello,
I've just installed OCFO 10.1.3.0.9 on a freshly-reinstalled system (Vista SP1 + Office 2003 SP3), and I've noticed the two following problems:
* My "Inbox" folder is updated properly as I start Outlook (either headers or full message bodies, depending on my Send/Receive settings), but after this, it is merely impossible to update any other folder!!!
This means: when you click on a subfolder, the content is not downloaded and the folder remains empty. Nothing more when you click on Send/Receive (even "Inbox" is no longer updated). Nothing more when you "Reset" the folder.
* In Control Pannel > Mail, when I try to delete a profile, the control pannel Mail dialog (rundll32.exe) just crashes as I click on the "Delete" button.
These two problems — and especially the first one — are seriously annoying. Have you already experienced them? Any workaround or solution to solve them?
Thanks for your help!
ArnaudG

I too had this problem, and rolling back to 10.1.3.0.7 has allowed me to manipulate profiles again. Sadly, I am still having an error concerning: "The Oracle Connector for Outlook could not connect to one or more servers in your profile."
Still playing with it.
-JB

I have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

i have an airport extreme and my computer runs Microsoft windows XP Media Center Edition 2005. I receive an error message saying " airport requires that your computer is running windows xp sp3 or windows vista sp1 or newer"...why?

It is required to be able to connect. Download SP3 here. http://www.microsoft.com/download/en/details.aspx?id=24
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
If Someone Helped You, Click
"This Helped Me"
If Someone Solved Your Question, Click
"This Solved My Question"

Vista SP1 + VGA adapter on Macbook Pro

Problem: Attach a vga monitor via a dvi to vga adapter, the vga screen is black.
Tests: Attached a DVI monitor (Mac 20" screen) - passed.
Tried another dvi to vga adapter - failed.
Tried another VGA based monitor - failed.
Vista does chime when the dvi to vga adapter is plugged in and I'm able to see a second display on the control panel and select a resolution. The display does work when I've booted in mac os x, or while vista is booting with the 640x480 startup screen. I've used another macbook pro 15" with the same setup and it works... so I would have to assume this is a problem with the hardware.
Setup: Boot Camp 2.1 with Vista SP1
Model name: MacBook Pro 15"
Model identifier: MacBookPro1,1
Processor name: Intel Core Duo
Processor speed: 2.16 ghz
Number of processors: 1
Total Number of Cores: 2
L2 Cache: 2 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP11.0055.B08
SMC Version: 1.2f10
Does anyone have any suggestions for this issue?
Thanks-
Bruce

Hi
i did what you said and tried with other resolution/refresh rate combinations, also with anoter external monitor (and vga cable) but its still the same: monitor is detected but there's no signal.
Now I will try to chek if the adapter works on other pc and monitor.
Thanks
(anyway it was the firs time i connect this mac to an external monitor)

TNS-12535: TNS:operation timed out on Vista SP1 OS

Hi everyone,
I am starting to play with Oracle DB recnetly..
today I have TNS connection failed issue.
When I tried to use ODBC to connect Oracle XE DB, I got ORA-12535: TNS:operation timed out.
Here is basic info:
OS:Vista SP1
Oracle Version:Oracle Database 10g Express Edition Release 10.2.0.1.0
I can connect Oracle DB by http://localhost:8080/apex and sqlpus.
and check - telnet ellen.test.net 1521, it is working.
I have no idea why my TNS connection got timeout issue.
Did someone encounter the same issue before?
Thanks for any input in advance.
C:\>tnsping XE
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 14-OCT-2
010 17:39:29
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = ellen.test.net)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
TNS-12535: TNS:operation timed out
C:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 14-OCT-2010 21:41:49
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 14-OCT-2010 16:50:35
Uptime 0 days 4 hr. 51 min. 14 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ellen.test.net)(POR
T=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=
HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully
for Instance"xe", I don't understand why I also got this error. Is there some wrong setting?_
file content: sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES = (NTS)
file content:tnsnames.ora
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ellen.test.net)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
file content: listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = ellen.test.net)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)

Is it related?I can not say it is related with 100% certainty.
You can conclude I had a REALLY lucky guess or there is high correlation between VM & having TNS-12535 error.
It is your system & you are free to (ab)use it any way you choose to do so.
We both know SQL*Net can & does work as advertised, but requires a properly configured OS & Network underneath it.

Safari 3.04 Beta and Windows Vista SP1 Beta

I recently had to re-install my system because of a hardware problem. After I installed Vista Ultimate I then installed Vista Ultimate SP1 Beta.
Previously I had just Windows Vista installed without SP1 and Safari worked. Now that I have installed SP1 Beta, Safari will not load. I get an immediate error message that Safari has stopped working.
Has anyone else encountered this problem. If so, can it be fixed?
Thanks.
Roy

Exactly the same issue here. All was working fine until Vista SP1 beta was installed. I updated from 3.03 to 3.04 but still no go. Also tried uninstalling then reinstalling to no avail.
Apart from this have not seen any other issues relating to Vista SP1 Beta.

'Windows cannot install required files' error while installing Vista SP1

I'm installing Vista Client SP1 on my Macbook pro and getting the following error:
Windows cannot install required files. Make sure all files required for installation are available, and restart the installation.
Almost exactly as described in this KB article: http://support.microsoft.com/kb/930984/ except my error code is 0x80070017. I'm double-checked CRC on my dvd to ensure it's not corrupt. Also I've previously successfully installed Vista SP1 from the SAME DVD on a different Mac Leopard (desktop)
Any ideas? This is a new Macbook pro, just got it yesterday. Could be DVD drive issue?
Thanks!

Did you get far enough to delete the FAT partition BootCamp created, so you could create a new NTFS one?
http://support.microsoft.com/kb/933925
or this:
http://discussions.apple.com/thread.jspa?threadID=1464025&tstart=0

Vista SP1 update - Error code 0x8007312

After not being able to install Vista SP1 x86 from Windows Update on 32-bit ASUS laptop, I downloaded the stand alone Update to a flash drive, disconnected from the internnet, turned off the firewall, exited Defender and w/no anti virus running
tried to install, same error message w/link to
http://go.microsoft.com/fwlink/?LinkID=101139
Downloaded to flashdrive and ran Reset Windows Update Tool and System Update Readiness Tool KB947821 w/clean boot, then downloaded SP1 update Windows6.0-KB936330-X86-wave1 from your site
(the other was .........wave0.exe), but still got the same error code 0x8007312 when I tried to Update. What do you suggest I do next? Thank you..

After not being able to install Vista SP1 x86 from Windows Update on 32-bit ASUS laptop, I downloaded the stand alone Update to a flash drive, disconnected from the internnet, turned off the firewall, exited Defender and w/no anti virus running
tried to install, same error message w/link to
http://go.microsoft.com/fwlink/?LinkID=101139
Downloaded to flashdrive and ran Reset Windows Update Tool and System Update Readiness Tool KB947821 w/clean boot, then downloaded SP1 update Windows6.0-KB936330-X86-wave1 from your site
(the other was .........wave0.exe), but still got the same error code 0x8007312 when I tried to Update. What do you suggest I do next? Thank you..

TV tuner cannot be used in Vista SP1 - Qosmio G

Hi
I have installed the Vista SP1, and when I try to see TV in media center, it says that "a required windows media center component is missing" or something like that.
When I try to configure it in the settings, it says that the hardware was not detected, and I have it installed, I can see that in the device manager.
Does some one have the same problem or have any ideas about how can I solve this?
Thanks,
Rafael

Hi
I have googled a little bit to find out what this error message could mean but it looks like this error is not specific.
This mean that different reasons could causes this issue
In you case I presume that the SP1 is not fully compatible with the TV tuner driver or the TV tuner does not work and could be recognized by MCE due to the tuner driver malfunction.
Sp my first advice would be the Tv tuner reinstallation.
Firstly remove the old driver from the device manager and then after a short reboot install the new downloaded driver.
Good luck

Treo Pro will not sync with Vista SP1

I'm really hoping somebody can help me here. I just replaced my aging 700p with the long-awaited Treo Pro (Sprint). I've actually been looking forward to getting fully Windows-based, since my 700p syncing was routinely problematic - always having to do workarounds and plug in the cord just the right way, etc...
Let me try to give you the flow so far.
I have Vista SP1
I get Treo Pro
I plug Treo Pro into Vista, SP!, all ready to sync up my Outlook 2007 data.
Treo Pro fires up a very impressive looking installation routine.
Routine seemingly works fine - getting me to the point where you unplug and reconnect your device to do your first sync
I reconnect, and hear the Windows "USB connect" sound, then.... nothing.
I open WMDC and it says "not connected"
I open "USB to PC" on the Treo, and uncheck the "advanced networking" box as suggested by some other posts.
Windows sees the difference and installs a couple of other drivers.
Windows connects, gives me the "USB connect" sound, and WMDC says "not connected"
The Treo appears to attempt a sync, but finishes with a message "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer. "
HUH? ActiveSync only works with XP - of course I can't install that!
By the way, I tried the same thing with my Vista SP1 laptop. Same exact results.
Also, at no time have I seen the WMDC icon in the tray area. (I remember having a Nino way back when, and the ActiveSync icon was down there)
I thought this was supposed to be easy - Windows PC, Windows device. Piece of cake, right? Not so. If I cannot get this thing to connect, I'm getting a Centro! (not my first choice....)
A thought... any chance this could have to do with having Palm Hotsync still installed (from my Treo 700p)?
Any help would be GREATLY appreciated!
Post relates to: Treo Pro T850 (Sprint)
Message Edited by finalewiz on 03-29-2009 09:02 PM

On Windows XP, having HotSync installed didn't interference with using ActiveSync with a Treo 800w. This is not exactly the same as your setup, but close enough that I think HotSync is not likely to be the problem.
How did you install WMDC? The downloadable User Guide (PDF pp44-46) refers to running the PC Setup program. Did that part go as expected?
I don't use Vista, so I'm not familiar with the additional complications that might be involved...
Post relates to: Treo 800w (Sprint)

Tv @nywhere PRO and vista SP1

hello
my media center doesn't work with VISTA SP1 and a TV@nywhere pro ,if i come back to vista standart, it works again.
simply the media center starts, but when i select tv for source it remains in loading with the logo on screen.
think i need a patch , like for the PLUS version.
help me thanks

Quote from: Covex on 07-January-09, 18:19:49
Unfortunately, I cannot uninstall sp1, so do anybody know a hotfix for pro cards and vista sp1?
As you can see you don't need fix:
Quote from: saeemon on 28-December-08, 17:45:12
hello
i tried to reinstall vista sp1 for the third time and now it works
i dont know what was the problem , now i happy

Titler Crashes - Vista SP1

Similar Messages

Maybe you are looking for