Titles are automatically changing length and shortening - imovie '11 version 9.0.2

Titles are automatically changing length and shortening no matter what I do. I'm using imovie '11 version 9.0.2 I have tried everything and they keep reverting back to random sizes. I have several 4 sec still pictures and I want the titles to match in length so I make them the same size but as soon as I move away or do anything else the revert back to some random size like 2.2s or 1.2s. I don't know why but it is very frustrating.
Thanks in advance.

It's been a month now and I just installed the new update (9.0.4) and it is still doing this. I took a screenshot of what it is doing. I want all of the titles to be the same length as the pictures. They are all 3.9 or so seconds. I drag the titles so they are the same size and then as soon as I do anything else it automatically changes back to this. Any Ideas? I just don't know why it's doing this and it's really bothering me. Please help!

Similar Messages

After loading the new OS now my songs do not play correctly. Titles are wrong on songs and it just doesn't play certain songs in random play or even if you select them individually. What's up? Kind of frustrating!!!

After loading the new OS my songs do not play correctly, is anyone else having this issue? Titles are wrong on songs and it just doesn’t play certain songs in random play or even if you select them individually. What’s up? Kind of frustrating!!!

I had the same issue. In fact I posted it yesterday, but didn't get any replies. I physically synched my phone to PC iTunes. on the PC, under the phone/music tab, I unchecked the synch music box and then the apply button to remove all of the music from my phone. Then once that synch finished, I went back and selected all music, and synch music and apply to put it back on to the phone. So far, I haven't had an issue again, but I also haven't listened very long. Hope this helps!

My start page are automatically change to speedbit page ?! how could i make it stop ?!

'''my home page are automatically change to speedbit page ?! how could i make it stop ?!'''

It'a not a bug, it's a new feature. LOL
Lion automatically loads the last used programs a real pain, but it can be disabled.
http://osxdaily.com/2011/08/25/disable-reopen-windows-when-logging-back-in-in-ma c-os-x-lion-completely/

Any suggestions for programs that can convert mpeg1 to a format that can be edited in iMovie Version 8.0.6 (821) and/or iMovie HD Version 6.0.3 (267.2) Thanks

Any suggestions for programs that can convert mpeg1 to a format that can be edited in iMovie Version 8.0.6 (821) and/or iMovie HD Version 6.0.3 (267.2) Thanks

Hi Mark
Was just looking for the answer to this exact question and I just found something that worked for me so don't know if it might be of use to you or you might have already solved your problem! Basically when I was in iMovie and I clicked to import movies from the computer into iMovie and I found the clip I wanted to import, there are a few options. I think it asked which Event I wanted to add it to but most importantly it asked me what file size I wanted...I had originally been clicking Large because it advised me to because it reduces the file size...but just on a chance there I selected 'Full - Original' for size and it imported perfectly into iMovie in it's original vertical form!
Hope this helps!
Bianca

RoboHelp/Word 2002: Topic Titles/ID Automatically Changing and an Unregistered Routines Message

I’m posting a problem/solution that my team ran into
recently in hopes that it will save other people time if they find
it also.
Problem:
I have a Help project created on an XP machine, using
RoboHelp Classic, with Word 2002. There are over 1500 topics in the
project, It is compiled as Webhelp, contains 1,667 objects, and is
22.8 MB in size.
While working in my project this week, I noticed 4 of my
topics in the RoboHelp Explorer view suddenly had a prefix of
"placeCity" in front of the topic title. It only appeared in the
explorer view and the Properties dialog, but not in the document or
topic itself. When I tried to change the topic title in the
Properties dialog and save, it acted like it saved, but when I
looked in the explorer view, they still had the strange, new
prefix. Then I noticed approximately 6 or 7 topics had the words
"State" and "stockticker" added to the topic IDs which showed up as
broken links. But when I looked at the compiled Webhelp file names,
they looked normal.
I exited RoboHelp. When I went back in, I received the
following message: "RoboHelp Explorer has detected that there are
unregistered routines used by the following features in this
project. -Html Topics or hotspot links to Html pages displayed in
the Help window. -Link to a Html page, displayed in the browser. Do
you want RoboHelp to make the necessary updates?"
I never saw this message before so I selected Yes. (This
message also appeared to another user on our network, crashed their
computer, but their project was fine afterwards – they were
using a Word 2003). I don't know if selecting Yes stopped any more
chances of RoboHelp automatically renaming topic titles and topic
IDs or what it did. I was afraid I might have a virus, so I spent a
whole day running virus/spyware software. The results found NO
virus but I did have some Malware which I removed. I didn't know if
this caused my problem with RoboHelp or not.
Solution:
We had other users guide us that it could be similar to the
font problem (with KB917334) that people were currently running
into. We checked and found a Microsoft patch had been loaded around
the time that our problems started: KB917335 for Word 2002. We
deleted the patch, rebooted the system, deleted all of the rtf
files from project, and then started RoboHelp. All issues were
corrected. We have now turned off automatic updates to that
computer until our release has gone out.
Text

OK and thanks very much for checking that the HTML output is
not affected by this problem. At the moment all I can say is that
Adobe are looking into it but I don't know what they have found
yet.
Changing the help type might not make you the most popular
person. I cannot say how much work it is but it's not a five minute
task. The problem your company has though is the winhelp has this
problem and at the moment you cannot get around it, assuming you
have tried all the suggestions that have been posted. That may mean
that there is little option but to go down the CHM route.
The only other thing that comes to mind is whether this
problem is RH related or Help Compiler related. If it is exclusive
to RH generated winhelp, then maybe some other tool is an option.
If it is Help Compiler related, it won't matter what tool you use.
Have you tried creating another project to see if you can
change topic ids in that? Has anyone else come across this problem?

Losing Title Bar when changing Look and Feel on the fly

Hello,
I have an option in my Swing app for the user to change the Look & Feel on the fly by selecting from a radio button list. The look and feel is changed when the user make the selection, however the Windows Title Bar disappears. Any ideas what I'm missing?
private void setLook(String mode)
String lookAndFeelClassName = null;
UIManager.LookAndFeelInfo looks[] = UIManager.getInstalledLookAndFeels();
for (int i = 0; i < looks.length; i++)
if (mode.equalsIgnoreCase(looks.getName()))
lookAndFeelClassName = looks[i].getClassName();
break;
try
m_view.dispose();
UIManager.setLookAndFeel(lookAndFeelClassName);
SwingUtilities.updateComponentTreeUI(m_view);
m_view.setVisible(true);
catch (Exception e)
JOptionPane.showMessageDialog(m_view, "Can't change look and feel:" + lookAndFeelClassName, "Invalid PLAF", JOptionPane.ERROR_MESSAGE);

You are disposing the view. My guess is that this is your problem. Try creating a new one instead of just showing the old disposed one

Why does Illustrator automatically change RGB and CMYK values

Hi, I am struggling to understand why Illustrator is changing the values inside the RGB and CMYK boxes. I am also not sure of the exact relationship between these values. Essentially, it appears that if you set the Document Color Mode to RGB, it leaves the RGB values that you type in alone. If you set the Document Color Mode to CMYK, it leaves the CMYK values alone.
But as soon as you change the Color Mode, it automatically modifies the values. So if you were in RGB mode and you set some RGB values, it changes those RGB values when you switch to CMYK mode. And vice versa.
I had thought that the CMYK palette was a subset of the RGB palette. It would make sense to me if it did this when I switched from RGB to CMYK mode, but it doesn't make sense to me why it does this when I switch from CMYK to RGB mode.
The other thing I am confused about is the relationship of the values in the RGB boxes to the values in the CMYK boxes. I would have thought that the relationship between them would be static. Actually, it is not. When I am in CMYK mode and I enter a CMYK value of 90 16 0 0, the RGB values become 0 158 222. But when I switch over to RGB mode, the RGB values of 0 158 222 result in CMYK values of 75 23 0 0.
Very confusing.
Thanks in advance if you can explain this behavior!
Best Regards,
Z.

Color management.
Hi, I am struggling to understand why Illustrator is changing the values inside the RGB and CMYK boxes. I am also not sure of the exact relationship between these values. Essentially, it appears that if you set the Document Color Mode to RGB, it leaves the RGB values that you type in alone. If you set the Document Color Mode to CMYK, it leaves the CMYK values alone.
An Ai document can be either RGB or CMYK. The colors follow the document color mode and thus are converted immediately if they don't match.
But as soon as you change the Color Mode, it automatically modifies the values. So if you were in RGB mode and you set some RGB values, it changes those RGB values when you switch to CMYK mode. And vice versa.
Same reason.
I had thought that the CMYK palette was a subset of the RGB palette. It would make sense to me if it did this when I switched from RGB to CMYK mode, but it doesn't make sense to me why it does this when I switch from CMYK to RGB mode.
It's not. CMYK color spaces (there are more than just one) are normally smaller than RGB color spaces, but they aren't a "subset".
The other thing I am confused about is the relationship of the values in the RGB boxes to the values in the CMYK boxes. I would have thought that the relationship between them would be static. Actually, it is not. When I am in CMYK mode and I enter a CMYK value of 90 16 0 0, the RGB values become 0 158 222. But when I switch over to RGB mode, the RGB values of 0 158 222 result in CMYK values of 75 23 0 0.
When Illustrator converts the colors, it uses color management: the profiles you set up and the methods you set up. After converting it forgets the color that used to be. When converting "back", it uses color management again.
When you convert an very bright RGB color, it be out of the CMYK gamut. So it get's converted to the closest possbile CMYK color (which might still be far away from the original color. But it's not possible to convert it "back" to the bright one unless you just revert the conversion (by Cmd/Ctrl + Z).

How do I add email address to a cell in a Numbers spreadsheet without the appearance automatically changing color and underlining? In Excel, I would add an apostrophe at the beginning which would keep this from happening.

How do I add email addresses in a column without them automatically converting to another color with underscores. I want the text to remain text.

Hi Sclaire,
Numbers > Preferences > Auto correction.
Uncheck the indicated checkbox.
Preferences panel image is from Numbers 2.3.
For future questions, please indicate the versions of Numbers and of OS X you are using, as answers will differe depending on this information.
Regards,
Barry
Message was edited by: Barry (Corrected arrow position)

Ipad Mini automatically changing apps and no control

one year old ipad mini, when using it automatically open up some random apps or goes to application store or will open something else and i cant stop it or pause. when checked in apple service centre in Trivandrum, they told its screen gone and need replacement but it is not available in india as it is out of country set. any solution can be suggested? after switching on few min it will work fine later only all such issues happens.

You may have many apps open. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
 Cheers, Tom

Cursor will not open web page icons after upgrade, icons are not changeing cursor and page sliders not working. .

Hi ,
Since I upgraded none of the web pages I visit will function correctly. In Yahoo mail I cannot opem the search box, Similiary in Google I have the same problem, In addition other icons are not recognised as the curson does not change and my page sliders do not work.
I am using Vista on a Toshiba laptop

Hi ,
Since I upgraded none of the web pages I visit will function correctly. In Yahoo mail I cannot opem the search box, Similiary in Google I have the same problem, In addition other icons are not recognised as the curson does not change and my page sliders do not work.
I am using Vista on a Toshiba laptop

Icloud calendar colors automatically changing

On iOS 6 and 7 my icloud shared calendars are automatically changing as if they are on a rainbow timer. When I set it back to a different color, a few minutes later it just goes back and changes again. I really thought iOS7 would solve this. Any suggestions?

Mine is doing the same thing. I though there would be one place where I could change it and it would push out to the others, but that doesn't seem to be the case. My primary calendar was Orange for the longest time, but now it keeps turning Purple.
Here's where I've tried to change it:
icloud.com via Safari 6 on OS X Lion
iCal on OS X Lion
Calendar App on iOS 7
Sunrise Calendar on iOS 7
On each one of these, I am able to change the color back to Orange, but within a minute or less, it is back to Purple. The only exception is iCal on Lion. It retains my color change even through calendar refreshes, but when the app is quit and relaunched, the changes have not persisted and the Orange calendar is now Purple again.

"Large" folder icons automatically changes to "List"

I am using Windows 8.1 and Office 365.
There are some folders and files in my system that I prefer "Large" icons.
Problem:
When ever I set the view as Large, they are automatically changed to "List" setting after I close the folder or system shutdown. Although sometimes they do not change, but the other times I have to change the settings back to "Large"
again and again.
Please help me find a solution.
Thanks

Hi,
The icon displays correctly as I want in my PC, I suggest you rebuild the icon cache in your system, then test the issue again.
this IconCache.db file is located at: (you need to show hidden files)
C:\Users\User-Name\AppData\Local\IconCache.db
delete the files, reboot.
Or rebuild in this way, kill the Explorer.exe with Taskmgr then run those commands:
cd /d %userprofile%\AppData\Local
attrib –h IconCache.db
del IconCache.db
start explorer
http://www.thewindowsclub.com/rebuild-the-icon-cache-windows
NOTE
This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Compilations are shown in Compilatios and under Artist

I have some compilations in my itunes with alot of different atrists. Al files are flaged as compilation. In the settings i flaged also Group compilations when browsing but al titles are now under compilations and also under Artists. After updating my ipod the folder Compilations is missing on the ipod.

I have the same problem, and I find it very, very annoying. I'm big on Library management, so this is a real problem for me.

ITunes Automatically Change EQ Setting Based On Which Airport Express Streaming? I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different

I have two Airport Expresses running at my house. Both are connected to different types of speakers. Neither speaker set has its own equalizer, and both require a different EQ setting to sound just right. Does anyone know of a way to have iTunes automatically change its EQ setting based on which Airport Express it is streaming to?

I'm in the same boat. I have a 6 zone amplifier running with 6 airport expresses to different rooms inside and outside the house. Each has it's own acoustic characteristics. I'd really love to be able to set each airport to equalize based on my SPL frequency sweep I did for each room.
Setting the eq in itunes won't do it as that is global plus I have many more sources for auiod other than itunes that use the AEs directly.

All my PDF forms are automatically transformed in Word forms,how can I change that and only choose the PDF I want to transform

All my PDF forms are automatically transformed in word forms,how can I change that and only decide which PDF to be transformed in word

Hi Ulfsch,
Thank you for posting on the Adobe Forums, kindly try the step mentioned below.
1) Right click on any of the PDF file and choose the option open with
2) Select choose default program
3) Select Adobe Reader/Acrobat from the list
5) Check the box "always open this type of file with selected program" (not the exact same wording)
6) Click OK
If you are on Mac, CTRL+Click on the file.
Go to Get info
Go to Open with
Change it to Adobe Reader/Acrobat and click change all.
Thanks,
Vikrantt Singh

Titles are automatically changing length and shortening - imovie '11 version 9.0.2

Similar Messages

Maybe you are looking for