Titles are not possible to edit or double click in a project anymore...!? something locked?

Hello,
in my project which worked fine for weeks I have to do title changes for different countries.
Now it is impossible to double click or edit the titles anymore.
I can create new titles but I can't edit them in this project.
When I create a new project I can edit titles.
Could there be sth locked in this project...!? Please help.
Thank you very much in advance.
Premiere Pro CC 8,1

Try this:
restart computer, hold down shift+alt while opening Premiere until welcome screen.

Similar Messages

  • Document is being distributed - changes are not possible

    Dear Guru's
    I have an issue when making a quotation transaction. After i saved the quotation transaction, i would like to change the window into edit mode.
    So i have to click the display or change button and then after i click that button, there is an message text   "<b>Document is being distributed - changes are not possible</b>" but after i wait for some minute, system still can not be change. and still appearing a message text "Document is being distributed - changes are not possible"
    Please could u give some information about this issue?

    The order in the CRM system remains in status 'to be distributed'
    because it waits for an answer of the OLTP system that the order has
    been successfully saved.
    The reason could be due to the following:
    1. Check in your system the delta download is active ?  Did you perform
       an initial download of SALESDOCUMENTS ?
       If you check in transaction R3AC4 there must be an entry for
       SALESDOCUMENT to enable a successfull delta download.
       Without a successful initial download of this object, no delta
       download will be performed.  Please refer to the SETUP AND
       DOWNLOAD guide you will find in the service market place
       http://service.sap.com
    2. Check if there are any ABAP Dumps related in OLTP ?  If yes, status
       will always be in distributed as CRM is still waiting for a reply
       from OLTP.
    3. Check your inbound/outbound queues are working.
    The note 490932 will help you to check your dataexchange
    customizing.
    Please, reward points if it helps you.
    Regards, José Ignacio

  • Lightroom 4 - My Nik filters are not in the Edit version of Elements when I want to edit with cmd+E.

    Lightroom 4 - My Nik filters are not in the Edit version of Elements when I want to edit a picture from the Lightroom Bibliotheque with cmd+E, because Ligthtroom use a back up copy of Ellements 11 that is on an extern back up drive (i don't understand how that is possible). My Nik filters are not on that drive but well on my Mac's Hard Disc.
    How can I tell to Lightroom to use the Mac's Hard Disc version that is in the Dock ?

    Of course my Nik filters are why the Dock version of my Mac.
    The question is that I don't know why, Lightroom when I want to edit a picture in Elements (cmd+e), Lightroom start un security copy of Elements that I have put on my extern hard disk and that copy is without the Nik filters.
    So how can I tell to Lightroom NOT to use the version of Element that is on extern hard disk but the original version on the hard disk of my Mac in the map Applications ?

  • Tabstrip wizard- Protected tab titles are not supported

    Hello Experts,
    I have created a tabstrip using wizard and all the tab buttons and subscreens are working fine except for one warning message I get everytime I pust a tab. The message is
    Diagnosis
    Protected tab titles are not supported.You cannot print the title on a tab index as the tab index does not support this'.
    Procedure
    Check the screen modifications or the Screen Painter definitions of the tab title.
    When you modify the screen, do not set the INPUT attribute of the tab title to '0'.
    I tried changing the input value for the tab buttons to '1', even then its the same error.
    Anyone who has came accross such error?
    Regards,
    Ahmad
    Message was edited by: Ahmad Quraishi

    Hi,
       I think you are using LOOP AT SCREEN to set some fields in change mode( input mode ).   While do that, it is trying to set the tab titles also as input mode.   So change this to display only by setting the value to 0 for tabstrips.
    when setting to change mode, skip the tabstrips as follows
      LOOP AT SCREEN.
        IF screen-name EQ 'TAB1'
          OR screen-name EQ 'TAB2'.
          CONTINUE.
        ENDIF.
        screen-input = 1.
        MODIFY SCREEN.
      ENDLOOP.

  • Photo titles are not shared

    When sharing photos the titles are not showing although under the Shared tab View->Metadata->Titles is checked (greyed out).
    When checking the info of the shared photo it says "No Title" and the field is not editable.
    Does anyone know how to make the titles show or edit them at least in the shared section?

    Currently the only way to share your photos a) in the order you want, and b) with the titles you supply is to export them as jpegs, then re-import them, then share. Not exactly elegant (Apple - Are you listening?)

  • In SharePoint 2013, some of the userswith contribute or full control rights are not able to edit and save office doucuments to SharePoint library.

    In SharePoint 2013, Office 2010 and IE 8. Office web apps is not configured.
    Some users with Contribute or full control are not able to edit and save documents back to SharePoint library.
    When they try to save they are getting following error:
    1. https://.....pptx is read-only. Do you want to save changes to a different file name?
    2. Project canot access "https://...." 
       Try one of the following
    The file may be temporarily open by another program. wait a momoment and try again.
    A file with the same name may already exists. Save it with a different file name.
    You may be trying to save to a read only folder. Save to a different folder instead.
    Please help me with this issue.
    will be waiting for any suggestions or solutions.
    Thanks
    Krish
    99

    Thanks again for quick response.
    I have requested users who are having this issue to try check in/ check out, and share the results.
    Result with CheckIn/CheckOut:
    User was able to check out but no edit option.
    'Edit Document' option under 'Files' tab was greyed out. I did check permissions every thing seems fine he has full control over the site and document library.
    Please advise.
    Thanks
    Krish
    99

  • Why lables are not possible in smartforms.

    In script Lables are possible but in smartforms lables are not possible .
    why lables are not possible in smartforms?

    HI,
    Refer to the wiki in the link.
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/label%2bprinting%2bin%2bsmartforms
    Regards
    Sumit Agarwal

  • Titles are not visible, they show up on timeline as a grey box no text  does not effect other events or projects

    titles are not visible, they show up on timeline as a grey box no text  does not effect other events or projects. could this have something to do with motion

    Without seeing the timeline it sounds as if they've been off. Maybe you pressed the V or the role is switched off in the timeline index.

  • Lightroom 5.6 Win8 64 import of some photos are not possible

    Lightroom 5.6 Win8 64 import of some photos are not possible: the photos are grey, the file name of the photos are already excisting in the catalog, older different photos, don’t Import Suspected Duplicates is not selected. There is no difference selected or not, the photos (Import are not possible) are always grey with the notice: These photos would be already imported! All other photos could be imported and gets grey.

    my-wedding-foto.de wrote:
    Lightroom 5.6 Win8 64 import of some photos are not possible: the photos are grey, the file name of the photos are already excisting in the catalog, older different photos, don’t Import Suspected Duplicates is not selected. There is no difference selected or not, the photos (Import are not possible) are always grey with the notice: These photos would be already imported! All other photos could be imported and gets grey.
    When Lightroom greys out a photo in the Import dialog box, it means the photo is already in the catalog. It doesn't mean that it is matched with an older photo with the same name ... in order for there to be a match, the file name and capture date and file size must be identical.
    So Lightroom thinks you have already imported the photos, and you think the photos have not been imported. Now I'm sure you are a very nice person, but I believe Lightroom. What you need to do is to find the photos in your Library Module and use them there. The photos can be found by searching for them by file name, after turning off all filters, and after clicking on All PHotographs in the Library Module.

  • Error - protected tab titles are not supported

    Hi,
    I get the following error when going to transaction va02, it says
    "Protected tab titles are not supported( tab TAXI_TABSTRIP_OVERVIEW title TAXI_TABSTRIP_CAPTIONS-TAB05)
    How do i correct this?
    Thanks
    Keshi

    Hi Prasad,
    Thanks for ur reply.
    Can you please explain a bit so that i can ask one of the basis consultant to do the necessary?
    Thanks
    Keshi

  • Protected tab titles are not supported

    Dear Experts,
    I am working on Tabstrips. I have designed 3 tabs on my tabstrip. when i am looking the screen i am getting a message like "Protected tab titles are not supported".
    Does anybody knows how to fix this?
    Thanks,
    chaitanya.

    Error message is like this
    Protected tab titles are not supported (tab TABSTRIP title COMPANY)
    Message no. 00119
    Diagnosis
    You cannot print the title on a tab index as the tab index does not support this.
    Procedure
    Check the screen modifications or the Screen Painter definitions of the tab title.
    When you modify the screen, do not set the INPUT attribute of the tab title to '0'.

  • Protected tab titles are not supported (tab TABSTRIP title COMPANY)

    hi gurus
    i got error in infotype like this wat is the problem
    Protected tab titles are not supported (tab TABSTRIP title COMPANY)

    Error message is like this
    Protected tab titles are not supported (tab TABSTRIP title COMPANY)
    Message no. 00119
    Diagnosis
    You cannot print the title on a tab index as the tab index does not support this.
    Procedure
    Check the screen modifications or the Screen Painter definitions of the tab title.
    When you modify the screen, do not set the INPUT attribute of the tab title to '0'.

  • My titles are not crip any more, they have jagged edges

    My titles are not crisp any more in Premiere Pro, they are jagged edged. Any idea how to fix them?

    Jim, these are my setting:
    Frame size: 720x480 (.900)
    Frame Rate: 29.97/S
    Pixel Aspect Ratio: D1/DV Nts (.9)
    Color depth: Millions of colors
    quality: 100%
    Fields: Lower fields first

  • SSRS 2012 some users are not able to edit reports in the server

    Hello All,
    I am install reporting services SharePoint native mode but some users are not able to edit reports on server error is "Application cannot be started contact your application vendor" but this users edit reports on their client machine
    using report builder 3.0.
    Please help me

    Hi harshad_mule,
    Because Report Builder in the Report Manager is a ClickOnce application, the error message means that one or more of the files listed in the application manifest cannot be found on the server, so the application cannot be started. Based on my research, frequently
    this means that the application is somehow corrupted, or that the ClickOnce store is corrupted.
    To fix this issue, we can try to refer to the following steps:
    If Report Builder is corrupted, we can update the Reporting Services to repair this.
    Check that the Report Builder application is existing
        Open the Report Server folder. By default, the folder is located in: C:\Program Files\Microsoft SQL Server\MSSQL.<X>\Reporting Services\ReportServer\ReportBuilder
        Make sure the file "ReportBuilder.application" is existing in the folder mentioned above.
    If it is existing, please use the following URL to access the Report Builder directly:
    http://<server>/ReportServer/ReportBuilder/ReportBuilder.application
    And this issue can also be caused by browser. Because not all report functionality is supported by all browsers in Reporting Services. So please use IE browser to start Report Builder to try it again.
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Protected tab titles are not supported(tab tabstr_ 025 title tab1)

    Hi,
       In training and event mgt module-while maintaining relationship with business event to person subtype A025 after saving the system asking anotherdata that time i got one error iam unable to maintain plz help.
    Error:protected tab titles are not supported(tab tabstr_ 025 title tab1)

    Hello Prasad,
    'Protected' means,  that the flag 'input' for the pushbutton of the tabstrip is set to 0. For a normal pushbutton this is allowed but not for a pushbutton which is the title of a tabstrip.
    Hoping this clarify.
    Kind regards,
    Graziela

Maybe you are looking for

  • Itunes privileges error

    1. I recieved a new iphone 4 after a repair right as itunes 10.5 was released. 2. In order to activate my phone I needed to sync with itunes, so I decided to update itunes before I activated my phone so it would download the new features. 3a. During

  • Why am I getting different values based on order of input when the task type remains the same?

    I'm having a hard time understanding the results I'm getting when I input task information. Here are the scenarios with different, unlinked fixed work tasks: I estimate a task will take 2 hrs to complete and put this into work. If I add 1 resource, w

  • How can I get my ipad to reflect the same playlist order that appears on my computer?

    How can I get my ipad to reflect the same playlist order that appears on my computer?  My computer has the exact desired order of playlist, but once the system is synced, the ipad does not reflect the propper order.

  • Do Apple stores do Year 10 work experience?

    I wanted to know whether Apple stores do Year 10 work experience in the UK, I've asked in a lot of places but I haven't gotten a straight answer. (Sorry if this is posted in the wrong area)

  • Snapshot Schedule

    Hey, I have created several snapshots with 'Start With' set to sysdate and next set to sysdate + 1 and I was just wondering what would happen if for some reason the materialized wasn't updated on a particular day, would the schedule resume with the u