Titles don't show after moving project

Anyone got any ideas? I created a slideshow in PE7 with titles. Worked fine and I rendered it to a WMV file. I then moved the project to a different PC (same OS and version of PE) by copying the raw footage, the project folders and prel file. The project opens fine on the new PC and behaves normally in all respects except that the titles are not visible when playing the slideshow within PE. They are there on the second video track as well as the asset list and can be moved and edited normally. While in edit mode (double click the title), they show superimposed over the slide as expected, but as soon as I drop out of edit mode and play the slideshow, they go invisible again. Video level in the titles is at 100%.
A second project (video instead of a slide show) was also moved at the same time and in the same way. It also incorporates titles and they ARE visible when the project is played in PE.
Did I perhaps miss copying a file that is not stored with the rest of the project?
Paul
PS: What is with the "points" system? When I created this post I was asked if it was a question. Since it was, I said YES. Then I saw when I posted it that I get one correct answer for 10 points or two helpful answers for 5 points. Huh? Or is it the other way around... I can GIVE 10 points for a correct answer? Did I miss the "rules" somewhere? Or are the points meaningless and I should just ignore them?
Note that it said I had 15 minutes to unmark the post as a question, but I can't find anywhere to do that. No, wait.... I found it and un-marked it. Turns out that part of the verbiage that said I had 15 minutes to unmark the post as a question was a non-underlined link. Not visible as a link unless you hover over it. Un-marking the post as a question doesn't seem to have done anyting to the post..... so what is the point of the points?
Not liking the new and "improved" forum much yet. Too slow and too confusing.
Message was edited by: paulgoelz

Hmmmm.... I was not aware that titles could be enabled or disabled. I'll have to look. That would certainly fit the symptoms.
If by opacity you mean the video level line, yes it is at 100%.
As for exporting titles, there are quire a few.... too cumbersome to one at a time.
FWIW, I had this typed up before lunch but when I posted it, the process froze. I finally gave up and closed the browser and went to lunch. Fortunately, I have gotten in the habit of hitting <CTL> C before posting so after lunch I was able to paste the text into a new reply window. Let's see if it works this time......
I appreciate that this forum is here but I have to say that I don't read it anywhere near as often as I used to because it is so painfully slow. I still think it is a Java thing.... when it is slow and unresponsive, CPU is maxed out. Definitely not acceptable for a page that is after all mostly static text. But I have to say that is par for the course in my experience with PE. Sorry, I just could NOT resist.....
No on the points... I unmarked it as a question thinking (falsely, it turns out) that there might be a points "budget" and I was only allowed so many. I have seen that on other support forums.
Maybe I'll go to a lesser used forum and create a second identity and then answer my own questions and rack up points. How silly.
Paul
Message was edited by: paulgoelz (speling)

Similar Messages

No audio after moving Project or Slideshow

Hi,
After I have moved a Project/Slideshow that includes audio/music, via Vault (restore) or Export/Import from my I-Mac to MacBook Pro, audio/music is not included.
On the MacBook Pro, the restore or import works fine, but after opening the slideshow the audio/music line in green is visible but with a yellow attentionmark. To regain the music I copy it from Itunes on my Imac to my MacBook and then drag it to the restored/imported and opened slideshow.
But, isn't there an easier way that automatic moves the music as well during restore or import ?
Cheers.

the invisible mute bug - it could not be that someone perhapsly inadvertently unnoticedly hit the M key (which is right above the "Go Logic! Stop Logic!" spacebar) before saving, not perceiving nor spotting that they had unwittingly without realizing it thus muted said region? Or, from another view, would "the invisible mutebug" disappear if the mute command was reassigned to ctrl-M?
There is also the sudden Bin-appearancebug and the uninvited metronomeclickbug, and the dissappearing plugin windows-bug.
Entomologists unite!

Missing Media error after moving project from MacBook to iMac

I can see the project in iMovie fine, and the audio track information bars are still showing in the editing window, but the background music track is now called "output" instead of the song name, even though I added that song to the iTunes library. That isn't a big deal, but when it comes to the Voiceover tracks it is a huge pain because I'll lose all the lipsyncing I have done. (When doing outdoor interviews, in order to defeat wind noise I use lavalier mics and digital recorders to produce separate wav files for the questions and answers.) Any ideas how to relink the tracks?

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
For opening your domain file in Lion for the first time or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Movie titles don't show on thumbnails in IPad

Since "upgrading" to OS 7.04 I can't see the thumbnail titles on my videos in the IPad. I can see them in my computer library; but they won't sync over to my iPad like they use to. Any ideas?

Not that I have found. You just see the picture and hear what ever music you applied to the slide show.
Here is a link from the apple support website on view a slide show with the ipod.
http://docs.info.apple.com/article.html?artnum=300251

Contacts don't show after firmware update (V05.23)...

After a firmware update I can't restore my contacts.
If I tried to enter them manually, I have the message "Contact saved to phone memory" but my contact list stayed empty.
Apparently they are really saved somewhere in the phone, since I can see them if I synchronize my phone with my PC. Bt there is no way to access them from the phone.
Anyone had a similar issue before ?

Very same problem with my 6730c. Updated firmware from Menu > Settings > SW Update. Now I fully cannot access my contact book (all contacts are stored to SIM card). These can be used from any other phone. When a person from contact book calls me it shows name. I can only call people who called me and so saved to Logs. Please update firmware as soon as possible, I wish to use my phone

Search page don't work after moving VO under another VO (by creating VL)

Hi, all! I need Your help and explaining... So, please let me discuss my problem.
I had my Search page. In my search page I search for records using APasesDati VO. On day I deside to move APasesDati VO under LVAIKolekcijaDati VO (created 1 to 1 VL). Now APasesDati VO is child of LVAIKolekcijaDati VO. And my search page don't work any more.
When I search for a record in Search form and try to navigate to this record, then I have following error: please see, - http://www.jetScreenshot.com/demo/20110516-867-20kb.jpg
Then I take a look to perv. Search page Bindings node (before move APasesDati VO under LVAIKolekcijaDati VO) and then to new Search page Bindings node (after move APasesDati VO under LVAIKolekcijaDati VO). There was differences, please see: - http://www.jetScreenshot.com/demo/20110516-o7f-75kb.jpg
There in Data Control isn't APasesDati VO (as I move it under LVAIKolekcijaDati VO). And that is the problem why my Search page don't work correctly. What can be done in this situation?
I tried to recreate APasesDatiIterator in Search page Executables, but I can't create this iterator. Please, see, - http://www.jetScreenshot.com/demo/20110516-x3g-68kb.jpg I think if I can create this iterator again, then all would work. But I can't.
I want to know WHY I can't create Iterator in Executables from Data Controls child element? And How can I resolve my problem?
If there are some miss understanding or need mor information, then please let me know!
Waiting for responses, best regards, Debuger!

Dear, Frank! Can You please, say how can I resolve my problem? My goal is to search for records in VOc (children object) and then from Search page SELECT RECORD and then go to page where VOc object is represented (on correct record). How can I do that?
Best regards, Debuger!

30 gig 5 gen. Titles don't show on slideshow pics.

I have connected iPod to TV to run slideshows. It works great for time spacing and transfer between pics. It does not show titles on any pics. Is this possible?

Not that I have found. You just see the picture and hear what ever music you applied to the slide show.
Here is a link from the apple support website on view a slide show with the ipod.
http://docs.info.apple.com/article.html?artnum=300251

My tiles don`t show after logging in-it goes straight to desktop

i have windows 8.1. my computer opens on the desktop instead of my tiles. i don`t think i changed anything-it just started doing it. how can i change it back? thanks
This question was solved.
View Solution.

Hi,
Right click an empty area of the Taskbar and select Properties.
Select the 'Navigation' tab.
Remove the tick in the box next to 'When I sign in or close all apps on a screen, go to the Desktop instead of Start'.
Click Apply and Ok to save the change.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Imported photos don't show up in project

I'm pretty new to aperture so bare with me here.
I imported 100 some photos off my camera card and I selected the option to stick the photos in an existing project. The problem is that I can't see any of those photos in the project. When I mouse over the project it says that there are 200 pictures (which is right) but when I go into the project, I see none of the photos I imported, I only see the ones that were in there before. What am I doing wrong? Or what do I need to do?

You are awesome! Thanks so much! Seems like "duh," why didn't I get that, but then sometimes those little things are so easy to miss...
Thank you.

Uploaded music titles from my computer, but the titles don't show under musik

unfortunately i still use windows xp (service pack 3) and not windows 7. therefore i can't use the icloud, if i understood the instructions correctly. so i tried to upload my music from my computer to itunes, but it somehow didn't work. can anybody help me. i'm sure i did something wrong but can't find any help under the itunes help. thanks in advance.

thank you so much. i did exactly what you recommended and now it works! got my iphone 5 today so i am a total newbie... and to make things worse i'm german and everything on the iphone is in german. but i found it. absolutely happy now!!!!!

6.0 themes don't show after dowloading Ilife 06

I've seen at my dad's that he had different Themes then I have although we both have Ilife 06 installed. On closer look I only have 5.0 and 4.O I've tried to re-install iDVD 06 but it doesn't change anything?
What now? There are some great new ones in 06 I like to use.

This worked for me with my Panther-based PowerBook:
http://docs.info.apple.com/article.html?artnum=303252
You will NOT get the iMovie 6 themes. Need 10.4.4 for those.

Unsupported image format after moving from one project to another

I scanned several thousands of images to my Aperture library. Went thru all of them providing adjustments to many of them, keywords to all of them and adjust date/time to all of them. All of the pics were visible, format is jpeg.
This is a managed library (all pics within Aperture db).
This morning started to restructure the project files (had three of them). After moving couple of hundred images to newly created project file I started seeing "unsupported image format" red screen after clicking the jpeg. 20-30% of the pictures clicked showed on viewer "unsupported image format".
Tried regenerating the previews. Tried command-option start with first fix the preferences option. Then with rebuild option.
Tried moving the pictures back to their original project file.
No joy... Still 20-30% of the pictures show the "unsupported image format".
Aperture 2.1.
Amy other tricks I could try?
Reported this to Apple aperture feedback of course.
--h

Link the two Macs together: there are several ways to do this: Wireless Network, Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
+Note: there is no importing involved+
The thumbs appear, but the images are added 2 or 3 times each and the events are all messed up.
This happens when you import one Library to another, which you've done by drag and drop:
Creating a black library and over writing the new with the old.
Your problem is arising because of the Network Share. iPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos.
Regards
TD

Photos not showing up in iMovie project after transferring project to external hard drive

I just finished moving my iMovie '11 projects and events to an external hard drive. In one particular project (the only one I've used photos in), the photos will not play back when I watch it in the preview window. The picture shows up in the project editing window, but during playback the computer seems to use the last frame of the last played video. All of the previous settings are the same, it will just not show the pictures. I've tried re-inserting them, even trying different pictures that were not used originally, but nothing seems to work. I've also tried closing iMovie and restarting it, but no luck.

Hi all
I am having the same problem - all a bit wierd. Yesterday I could drag and drop images from finder into my project. Today, I can drag andf drop the images from finder and they display in the project - but not when it is played.
I tried importing the images into iphoto and dragging them from the media selection window - still no joy - I can see them in the proejct - but they just don't show when played.
Is it because the project has been marked as finished in some way - although I haven't finalised it?
Any help appreciated.
Thanks

IDVD 6: Menu buttons don't show up from iDVD 5 project

I have an iDVD 5 project that I opened in iDVD 6. It consists of 3 slideshows. (There was an issue with it not seeing the iPhoto 6 photos, but that's another issue I posted in the iPhoto forum.)
The buttons that show the slideshows do not show up in iDVD 6. But if I go to map view, the slideshows show up and I can go into them and see all the slides are there and I can preview them. (Well, when it doesn't crash.)
I tried creating new menus but those don't show up either (although, oddly enough, at one point I added a new menu and the title of one of the slideshows showed up!). This project had the Travel theme in iDVD 5.
So in summary: the menu buttons to start the slideshows don't show up when I open the project in iDVD 6. They also don't show up in the title (main) menu when I preview it in iDVD 6. I haven't yet tried actually burning a DVD.
Any suggestions?

The -34506 error. Welcome to a world of frustration and wasted evenings. There are plenty of threads here with suggestions on 'rules' for setting up your slideshows in iMovie, clearing caches, creating new users etc. These have fixed this particular error for some people.
Good luck!
Simon
## Oops! - I should have read your post more carefully the first time. Hey, at least you have a new number, even if it does provide as little real information as to what the source of the error is as the one I mention!
Message was edited by: Simon Dean

Moved Project To Knew Computer After Everything Is Named-Drive Formatting?

Did search, and seems to be a common problem, but there are a little differences. In the past, when moving project, after starting, everything just showed up. This time, the red lines everywhere. Tried renaming file to clip and vice-versa, and nothing. Double-checked and have all the media. I thought the pathway pointers were imbedded, maybe not. Do have sub-clips. Did hear some talk about how the original media(P2 DV)is saved, can affect it. Was original saved to portable firewire drive that is Fat 32 to capture P2 in the field for Macbook pro. New media drive is extended. Any help is appreciated.

Assuming that you have canvas and/or viewer set to "image" not "wireframe" the only thing I can say is that you double check again that you have the most updated version for Motion or a version that your FCP version would expect to connect with. I have seen other people experiencing this, the answer could be the awkward worst case scenario you want to avoid or simply an update inadvertently missed. Rather difficult to establish without investigating further within your actual workstation.
G.

Titles don't show after moving project

Similar Messages

Maybe you are looking for