Titles for a spreadsheet

I would like to center a title in my numbers spreadsheet over all the columns in the spreadsheet. Thanks

p,
If you have one title for the entire table, the easiest way to apply it to your table is to Name the table with your title. If you don't see "Table 1", or similar, highlighted in your Sheets Pane, click the triangle next to the Sheet icon so that the tables and charts on your sheet are listed. Then double-click the table name and edit it. Now, while the table is still selected, go to the Table Inspector or the Format Bar and click the Name checkbox. Now your table name will appear above your table. If you don't see that table name above the table, it may be because a cell is selected in the table -- in this case click once away from the table. The table name label may be Left Justified. If so, click on the table name above the table, and click again if necessary, until a faint rectangular box appears at the top of the table, surrounding the table name. Then go to the Text Inspector, of Format Bar, and set the Justification to Centered.
That method accomplishes the title and also makes navigation easier in a large document because the table name in the Sheets Pane is distinctive.
Jerry

Similar Messages

How to populate column titles for y values when using Write to Measurement File Express VI with a tab delimited text-based .lvm file?

The .lvm file generated by the Write to Measurement File Express VI includes column heading titles for the y values, but they are a default value of "untitled". See attached example of a sample file when opened in Excel, the values in question are highlighted. Is there a way to specify the column titles when the file is written?
This is a similar question to this posting, which received a work around response to use the Write to Spreadsheet File.vi, rather than a solution when using this VI.
Message Edited by Hightop Raven on 05-02-2007 03:37 PM
Attachments:
column_titles.gif ‏13 KB

Sorry for the late reply. I was out of the office Friday.
You can do it, but the code can get rather ugly. Under the hood, the dynamic data type (the dark blue wire) is an array of waveforms. In your case, the scalar values you convert to a dynamic data type are being converted to an array of waveforms, each waveform having one element. You have two options.
Explicitly convert your scalars to one-element waveforms (t0=0, dt=1) and add the title before conversion to a dynamic data type.
Convert your dynamic data type to an array of waveforms and loop through them to add the column labels. The conversion blocks are in the Signal Manipulation Express palette.
I would recommend 2, since it is the easiest to add. It is also the easiest to run only on the first iteration. Just put a case selector around the loop, wire the selection to the While loop iterator, and set the case containing the label code to 0. The default case simply passes through the dynamic data.
My apologies for not including a screen shot. I am in the process of upgrading my machine and can't run LabVIEW. If you need one, let me know and I can post one tomorrow.
This account is no longer active. Contact ShadesOfGray for current posts and information.

Duplicate report title for every date where records are found in date range

Hi,
I have a developed a report that lists multiple entries by date range with a page break separating each date. What I would like to include now is a report title which only appears once for each date, and separated by page break.
Example:
(Business Unit)
(Address)
(Report Title)
(Date)
Entry 1
Entry 2
Entry 3
Entry 4
Entry 5
Entry 6
Entry 7
(Business Unit)
(Address)
(Report Title)
(Date)Entry 1

Hi Camelbak2113,
According to your description, it seems that you want to eliminate the duplicate report title for every date. If in this scenario, I suggest that we can try to add a group grouped on date range, and then add a child group grouped on report title. Then add
page breaks between each instance of date range group.
If I have something misunderstood, please provide us more information about the report. Such as provide us some screenshots about the report with sample data. So that we can make further analysis and help you out.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How can I create a Title for the worksheet in Discoverer Plus

Dear members,
I am using discoverer 4i Plus to create workbooks. I am not finding an option to insert a title for the worksheet. In Discoverer Desktop we have a separate option to insert or edit a title. I am not sure how can we create titles in Plus.
Any suggestions.
Thanks
Sandeep

Hi,
I am not able to login to Discoverer Desktop Using my Applications username. My Desktop Version is 4.1.37. The same username works in Discoverer 4i Plus and i can create workbook there.
I went to Tools--->Options--->Connections and checked the option connect to both standard and application EUL's and while i am logging in i checked the small box which comes in the login screen. I do not know why this happening.
I am also able to login as the database user in Desktop but not as an application user.
I want to login into desktop as an application user and create a template workbook which has title and then assign that workbook to a particular responsibility since creating title cannot be done in Plus.
I am not sure what's going wrong here because the Desktop works for database user but not for an application user. Any comments are highly appreciated.
Thanks
sandeep

I am looking for a spreadsheet app that I can create new spreadsheets. So far nothing looks promising, any suggestions or do I have to go to windows?

I am looking for a spreadsheet app that I can create new spreadsheets. So far nothing looks promising, any suggestions or do I have to go to windows?

Hi Tx Tar Heel,
I've been using Office2HD: https://itunes.apple.com/us/app/office2-hd/id364361728?mt=8
Its cheaper than Numbers and it also works for Word and PowerPoint files too. I like the Dropbox integration. I can start on my Office docs (Word, Excel, PowerPoint) in the office and then edit those files with Office2HD when I'm out of the office. Files saves right back to Dropbox so that when I get back to the office the files are already updated. Not bad for a $7.99 app!
Hope this helps!
~Joe

Change the Page Title for all the pages when viewing the Reports in Bi Publisher

Hello ,
I have a requirement for changing the Page Title for all the report displayed pages on the browser window.

As far as I know, answer is NO.
it's very simple answer Manikandan-S-Oracle
for 1210326 's requirements there are some places for changes of property "title" and in some pages "title" can be different
"one place or option for changing" does not exist imho ( may be i'm wrong )
so you can change places for your needs but not sure what it's adequate
as example
...wls\user_projects\applications\bipdomain\xmlpserver\catalog\navigator.jsp --> find <title>
it changes title in http://somehost:7001/xmlpserver/servlet/catalog
... wls\user_projects\applications\bipdomain\xmlpserver\home\home.jsp --> find <title>
it changes title in http://somehost:7001/xmlpserver/servlet/home

Creating a title for RSS feeds

Hello-
I have a podcast and have made a website for it using iWeb. I went to iTunes to submit my podcast, but later found out that my RSS feed for my podcast has no title in the blue section at the top of the screen.
How do I create a title for an RSS feed (it should be the same whether or not it's a blog or a podcast) using iWeb '08? By title, I mean the words in the blue bar at the top of any RSS feed. My website is http://web.mac.com/rafaelsands/GreatCommercials_Podcast/Great_Commercials_Podcast/Great_CommercialsPodcast.html and the RSS feed is feed://web.mac.com/rafaelsands/GreatCommercials_Podcast/Great_CommercialsPodcast/rss.xml
Besides no title in the blue bar, I also noticed there is no source link on the right hand side.
All help is appreciated. Thank you,
Rafael Sands

I am having the exact same problems, any help or ideas would be very much appreciated.

Help.... trying to set the browser title for reports called from 9i form

hello all
I am attempting to call a 9i report from an oracle 9i form .I am using the following code
repid := find_report_object('report5');
SET_REPORT_OBJECT_PROPERTY
SET_REPORT_OBJECT_PROPERTY (repid,REPORT_type,CACHE);
SET_REPORT_OBJECT_PROPERTY (repid,REPORT_DESFORMAT,pdf);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'sandy4');
v_rep := RUN_REPORT_OBJECT(repid,p1_id);
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://----.--------.com:8888/reports/rwservlet/getjobid'|| substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=sandy4,'_blank');
.. and so on
The reports RUNS FINE AND POPS UP AS A NEAT PDF internet explorer page !!!
I WAS WONDERING IF THERE IS ANYWAY TO SET THE BROWSER TITLE OF THIS REPORT THAT POPS UP..
DO I HAVE TO CHANGE SOME PROPERTY AT THE REPORT END
OR CAN I SET IT DYNAMICALLY BY PASSING AS A PARAMETER
FROM MY FORM
I HAVE SEARCHED EVERYWHERE FOR THIS
PL HELP
I WILL REALLY APPRECIATE IT IF SOMONE CUD HELP ME WITH
THIS
THANK YOU
SANDY

Hi,
It is possible to set the Document title for PDF output. Open the Reports Property Inspector, under PDF Document Taxonomy, you can set the Document title. But this does not show up in the browser when you open the document.
thanks,
Senthil

BP Title for person not updating in database

Hi Experts,
I am finding an strange problem in creation of BP.
We are uisng CRM2007 service pack5. Whne we try to create BP from IC agent role, we select the Title as Mr. after saving the BP on web IC, the title is not getting updated in the database table BUt000.
Can you confirm is this a bug because of new Service Pack 5.
Regards
Arun

Hi Arun,
The title for HR employees and business partners have different key. Hence title 0001 may have different text for HR and different for BP. Hence, the code needs to do a mapping.
For this, you need to maintain the customizing tables correctly. Please refer to note 984590 which has this information.
Can you check if notes 1004176 and 1239702 are applied in your system u2013 they take care of this title mapping problem.
This should solve your problem
Cheers,
Rishu.

Title for Flash movie (Swf file)

Hi
I want to add any title for my flash movie, As we can add any
title in HTML page with "title tag".
Usually the file name of flash file show as title like
"abc.swf"
but i want here another title like " Welcome to my xyz"
anything else....
Can anybody help me getting its solution....
Alok

Wishing to do the same thing, I've explored this with Macromedia. It appears to be a licensing problem for the Flash 5 engine. Macromedia wants a commitment of several thousand dollars (like close to 6 figures) to license the engine for an application. That's for a single applicaiton, and not a generic toolkit like JMF. I assume Sun found the same thing and balked, understandably.

Is iwork the solution for uploading spreadsheets from a PC to view on a ipad?

Is iwork the solution for uploading spreadsheets from a PC to view on a ipad?

So do you think any one at apple can answer this question, instead of having to check out there in the world to see if someone has accidentally figured it out?

Photos app and titles for slideshow

What is the best way to create titles for a series of photos to be played back in the photos app?

you have the answer
For now the solution is to use Mail or to export the photos and use them then delete the exported photos
LN

How translate alts and titles for a images in dynamic content?

Hi,
I have a classic report with a column that shows diff. images based on decode expression for that column in report sql. Is there a way to translate alt and title for those images displayed dynamically?
Thanks.

Hello Edward,
>> Is there a way to translate alt and title for those images displayed dynamically?
Yes. You can use the APEX Dynamic Translation option:
http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/global.htm#BABFHCJA
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

TITLE for the Interactive report

Hi,
I like to show a Title for the Interactive Report in several different languages.
But it seems if I just pick Interactive report, there will be no Title shown.
What is proper way of doing this ?
So, what I did was, I created a HTNL region, just to show the Title, but it seems the translation and XLF file doesn't pick it up
Please help
--John

I have further to report.
It looks like a bug.
The REGION title text is missing in "TRANSLATE APPLICATION" in "SHARED COMPONENTS" under WINDOWS environment.
The REGION title text is in SUN environment, but does not shown as translated in the browser.
Thx
--John

How to display header title for 0MATERIAL texts in the query output?

Dear Bwers,
I have a requirement where i need to display headers titles for 0MATERIAL texts in the query output. (example "Material description"). Any ideas on how to do this?
Thanks
Raj

Kamal,
Its is as below:
<b>Vendor</b>    <b>Vendor Name</b>
1001 ---            Bright Industries
1002 ---            Glow Industries
I want to display the header title "Vendor Name" as the title in the column instead of displaying the text without any header title.
Thanks
Raj
Message was edited by:
        Raj Singh
Message was edited by:
        Raj Singh

Titles for a spreadsheet

Similar Messages

Maybe you are looking for