Titles on linked Pr sequence not appearing on Encore DVD?

I have a sequence linked from Pr pro CS5 to Encore CS5. I have added titles to video track two in the Pr sequence. They link up just fine in En. When I preview disc in En, the titles come in and fade out just as planned. All looks great. However, when I burn the project to DVD, there are no titles on the DVD??? I saved the Pr project, even rendered it prior to creating DVD in En CS5. I have done this process twice. Both times no titles on DVD. What am I missing??
Thanks very much for advice. This is a once a year project, so sorry I have to re-learn many things again...and again.
Kenny

UPDATE:
Anyone have any ideas of things I could test? As I stated, the disc when played in my PC shows the titles, just not on two different stand alone DVD players I have?
Stan, you mentioned source/sequence settings? Is there something specific I could provide?
So you know what I did to create these titles. In Pr, working with the sequence I have dynamically linked to En in the timeline. In Project panel, new item, title. Then edit title and drag to video track two in timeline, set keyframes for fade in/out.
To make my next title, in title edit window, New Title Based on Current Title, rename it, edit, drag that to timeline etc.
These titles show in En when previewing disc and on burned disc played on PC as stated.
Stuck in the mud?
Thanks for any/all suggestions!
Kenny
__0
_ \<,_
Date: Thu, 25 Nov 2010 06:22:44 -0700
From: [email protected]
To: [email protected]
Subject: Titles on linked Pr sequence not appearing on Encore DVD?
I would build to a folder and see if that plays correctly on the computer. (Rule out disk/burning issues.)
Do a small test project if the files are large, but bring the same bit out of Premiere with no fades on the titles. Do they burn?
I wonder about your source/sequence settings.
I always find such problems very odd.
>

Similar Messages

RoboHelp HTML v9 - Browse Sequence not appearing when generated

RoboHelp HTML v9
New project - eg not converted from previous version
Added a browse sequence as per the help documentation - I've followed the help documentation however when I get to view result of the generated WebHelp - the browse sequence is not present on the topic pages that were added to the browse sequence.
I read previous forum postings for RH8 - where reinstalling or repairing the software seemed to assist - however when I access through control panel - add/remove programs the only option in to Remove RH9.
So I thought I'd ask the question here before uninstalling.
There was also mention of a dll file that needs to be registered on the viewers pc before the browse sequence would appear and if this is the case due to the possible audience for the publish I would not be able to control that.
Any help is appriciated, thanks.

Hi
Thanks - I guess I was looking for the page icons that visualized the
sequence for the viewer.
That being said - the navigation arrows are present in my published file
however seem to hold no functionality - while on a topic that is within
the browse sequence clicking the arrows does not move through the
sequence.
I was initially looking for onscreen navigation for a series of topics -
I though browse sequence would do the trick but I think I will move to
another method.
Karen Voycey, BSc
Learning Solutions Specialist | Human Resources
10 Wellington St. E. | Toronto, ON | M5E 1L5
t. 416 366 7600 x 2451|1 800 569 1163 | cell +416 568 2551
[email protected]
Proud national insurance sponsor of the AIR MILES® Reward Program. For
more information go to www.rsagroup.ca.
RSA is a registered trade name of Royal & Sun Alliance Insurance Company
of Canada.
From:   Captiv8r <[email protected]>
To:     Karen Voycey <[email protected]>
Date:   13/07/2011 04:52 PM
Subject:        RoboHelp HTML v9 - Browse Sequence not appearing
when generated
Hi there
Your mention of: "the browse sequence is not present on the topic pages
that were added to the browse sequence" seems to imply that you are
expecting to see the sequence directly on those pages. But that usually
won't happen.
Perhaps it will help to start by viewing the link below:
http://www.robowizard.com/RoboWizard/NewProject.htm#MonthlyScry/012006.htm
Then come back with any questions you may have.
Cheers... Rick
http://www.robowizard.com/pc.gif
Helpful and Handy Links
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
http://www.gooberguides.com/ProductPages/RoboHelp/RoboHelp82Day.htm
http://www.ShowMeSolutions.biz
http://sorcererstone.wordpress.com/
http://www.gooberguides.com

In Photoshop Elements12 (with Windows 8.1) added titles to my pictures do not appear in Windows. Formerly, in PSE 6 (with Windows Vista) added tiltles also appeared in Windows.

Formerly using Photoshop Elements 6 with Windows Vista I could add (or change) titles to my pictures in the Organizer and find the same titles afterwards also in Windows. Nowadays using Photoshop Elements 12 with Windows 8.1 and adding titles to my pictures in the Organizer I do not find these titles in Windows any more. That makes me sad because I want to have the titles in Windows but adding the titles is much more comfortable in Photoshop Elements than in Windows. Please tell me: Is there a help for me?

I have a Dell U3014 as well as a couple of older Dells turned up sideways as "ears".
Other than supplying the desktop "theme" (if you can call a complete lack of style along with a fair bit of inconsistency a "theme"), the OS really shouldn't be causing you to have a washed-out desktop experience. That's more a
matter of your display driver not really doing its job. What video card do you have?
FYI, one of the reasons I like Aero Glass for Win 8.1 (a 3rd party package) is that it allows me to make the desktop more pleasant to use and helps set the client areas (i.e., where work gets done) apart from the window chrome.
From what I can see, the color-management logic in Windows 8.1 is essentially unchanged from what it was in Windows 7. That there has been NO progress in this area is really a disappointment. It's an area where Microsoft has again just stopped
trying to make improvements.
If it's at all interesting to you, here's a screen grab of a REALLY cluttered up desktop. I don't normally work this way; this was an exercise to see how much I could get running. I finally gave up starting more stuff as I grew tired
and it just kept working fine...
http://Noel.ProDigitalSoftware.com/ForumPosts/Win81/BusyDesktop.png
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

When right clicking to send a link , the` send link` option does not appear as n option on the menu list.

the ``send link`` option just disappeared..It happened immediately after an automatic update to firefox when my computer has to be restarted about a month ago.
sometimes a ``copy link location`` will be on the list...and that will allow me to send on a link..but normally now it rarely appears and send link has disappeared entirely from the right clicked menu box.

hello bblauman, mozilla does clean up the interface of the browser from time to time - a user study has shown that this context menu entry is only used by a small fraction of the users. however, in case you miss this functionality you could use an addon to recover it: https://addons.mozilla.org/firefox/addon/send-link-in-context-menu/

Pr CC sequences not compatible with Encore CS6

Dear Adobe,
Could you please consider doing one of the following:
1. Make a CC version of Encore
or
2. Release an update that will make Pr CC sequences compatible with Encore CS6
... I really miss being able to drag Premiere Pro sequences directly into Encore.
Thanks!
-Stefan
P.S.
I really like your products!

Both 1 and 2 are NOT going to happen... CS6 is the final Encore http://www.adobe.com/products/encore/faq.html
There is a link at the bottom of http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html to a video tutorial on using EncoreCS6 with PProCC

Attachment Link Not appearing

Hello Experts,
Attachment link button is not appearing on the toolbar, Can anyone know how to Activate that button.
Thanks.

Hello,
check this link:
Activate GOS business application for object PREL
I hope it helps you.
Regards,
Pedro

The index link does not appear in italic. What do I do wrong?

The primary definition of the glossary term does appear in bold, but the secondary (index link) term does not appear in italic. I also can not format the word in another color or typeface. Any ideas on how to fix this?

Try one of your other USB ports. Be sure to insert it with the plated fingers pointing upwards.

ITunes Does Not Appear in the List of Default Programs?

My wife is trying to get iTunes to be her default media player, using the instructions found at this link: http://support.apple.com/kb/HT3202.
However, when she goes to the list of default programs, following steps 1 and 2 at that link, iTunes does not appear in the list.
How can we correct this?
Thanks very much in advance for any info.

Vik-
I was having this same problem. I understood how to change the default program but like yours my iTunes was not in the list so therefore I was unable to set it to default.
This worked for me: (I have Vista)
I checked for updates on my iTunes program and there was an overdue update. I installed and restarted iTunes. Then went to my Default Programs tab and followed the instructions just as described in the support material and after my installation of the newest update my iTunes was now listed in the lineup of available default programs.
I hope this works for you as well!
Thanks and good luck!

AED not appearing in J2IUN

Dear Experts
I am running J2IUN. Given the subtransaction type IP manually in the selection screen. Even then, AED is NOT appearing in the utilization screen.
What needs to be done, for AED to appear, so that AED can be utilized from BED balance?
Guidance/help will surely be appreciated.
Thanking you for your time.
Rgds
Sumanth.G

Dear,
Please go with this link,
[AED balances not appearing in J2IUN for utilization;
Regards,
Sandip

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
Thanks

Hi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Axis Title does not appear in the transated language after translation

hi all,
i have some problem with the translation.
I have an application in german and in french , it works propertly but the X,Y Axis Title and the region name does not appears translated in the chart although they appears in the xliff files and i translated it.
can you see please the snapshot of the region in the link below.The X,Y Axis are in german and the tab names and items name are in french.
I'm sure the X,Y Axis appears in the XLIFF file and i translated them.
can you please help me?
thanks,
kandouda
snapshot: http://imageshack.us/f/835/33071086.png/
Edited by: 896470 on 14.11.2011 07:10
Edited by: 896470 on 14.11.2011 07:22

bump

Title does not appear in Lightroom web gallery

Hello, I have the "filename" set as the title in the web gallery (under the "Image Info" panel), but it doesn't appear in the preview window. It also doesn't appear when "filename" is set as the caption. Both the caption and title fields are blank. In fact, when I change the text to any of the other options (sequence, date, etc), still nothing appears, the field is blank.

Geoff:
I just did a test and the filename does not appear:
http://www.rokeachphoto.com/test2/
There should be a filename under the large image, but nothing...
I'm probably doing something wrong.
Barrie
Barrie Rokeach
499 Vermont Ave.
Berkeley, CA 94707
510-918-0809
[email protected]
Read the S.F. Chronicle's recent profile of me:
http://www.sfgate.com/cgi-bin/article.cgi?f=/c/a/2011/04/04/DD2G1IOGK2.DTL
aerials: www.rokeachphoto.com
corporate: www.rokeachphoto.com/corporate
special events: www.rokeachphoto.com/specialevents
art: www.rokeachphoto.com/Art

BPM Application Link does not appear in BPM Workspace (11.1.1.7)

I spent huge amount of time to reveal why does that happens.
All that follows further is valid for BPM Suite 11.1.1.7.
The scenario.
You developed a simple BPM process with Initiator pattern (maybe by following the "Quote Request" tutorial).
But the application link did not appear in BPM Workspace.
Here i'm skipping any kind of mistakes as "oh, incorrect swimlane", "oh, i did not include the user to the app role" and so on.
At first, you should know about the "feature" - You have to attach task form to the Initiator Human Task to see the App Link.
The simplest way to do that is to AutoGenerate task form (and deploy it, of course).
Else the Appication Link will not appear.
One exception to this rule - If your Task HAS NO PAYLOAD (no parameters) the Task Form is not required (to appearing of the Application Link).
The second find is a bug (is think so).
If you edited the Role that Attached to the swimlane of Initiator Task, you will not see the Application Link.
If you look to organization.xml you will see something like this:
        <ns1:applicationRole id="StartTask.InitRole" isProcessRole="true">
            <ns5:name>StartTask.InitRole1</ns5:name>
            <ns1:processRole id="InitRole" name="InitRole1"/>
        </ns1:applicationRole>
The Application Link will appear ONLY IF THE "applicationRole id", "applicationRole name" and "processRole id" have the same value.
When you edit name of the application role in Organization Editor you change "applicationRole name" and "processRole name" values.
After that "applicationRole id" != "applicationRole name" and the Link does not appear.
How to fix?
Just edit organization.xml (with external editor) - change the "applicationRole name" to the value of "applicationRole id".
That allows to have value of "processRole name" something like "The Initiator Role" - that value appears in the BPMN diagram of process.
Also you can edit organization.xml with Organization Editor and set the Name to the value of "applicationRole id".
In that case the associated swimlane will have the same name as the "applicationRole id".
Hope this helps somebody
Oleg

Flash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually.

When creating a new project, the step "new sequence settings" doe not appear automatically, what to do?

Hi there,
I have a question I am doing product videos for a comany they would like me to do this in a format that is 16:9 and in HD. Since they don't know on which channels they want to publish it but it is certain they will publish it on youtube I wanted to do it in the settings HDV and then DVCPROHD 720p24 or even 1080p24. I have bought the license of Premiere online and for some reason I do not have the option in the beginning when I create a new project to change the sequence settings. They do not appear and afterwards I cannot change them. Do you guys have an idea what can be done in order to access this setting before the project ultimately opens?
I'd highly appreciate any kind of help on the matter!
Cheers,
Mascha

Or do this:
or this

I have an Iphone 4, I have music files that appear on my phone that I want to delete, when I link it to my computer the songs on the phone will not appear in Itunes so I can delete them, Is there any way to delete these song off the phone without going th

I have an Iphone 4, I have music files that appear on my phone that I want to delete, when I link it to my computer the songs on the phone will not appear in Itunes so I can delete them, Is there any way to delete these song off the phone without going through Itunes?

Nope, it either needs to be plugged in or turned on with the power button.
A replacement iPhone 4 is $149, but at least the whole phone is replaced.

Titles on linked Pr sequence not appearing on Encore DVD?

Similar Messages

Maybe you are looking for