Titles - Scale in Timeline not in line in title preview

Hi
I have the following issue which I hope someone may be able to recommend a solution.
First title created in Title in Premiere CS6 on a PAL widescreen formatted timeline was OK. But when second title made using the 'new title based on current title' - the second title when placed on the timeline is outside the safe margins and distorted. I have rebooted the system but the same issue arises. See screen shot below. Any assistance would be appreciated!
Thanks

OK, I'm guessing this a bug. To attempt to isolate the cause further, #1 does the problem occur when you don't use "new title based on current title" within the same sequence?
#2 close current project and build new project, import footage and allow dragging of clip to sequence to Change sequence to match clip settings. build titles both manually and using "new title based on current title"
#3 delete Premiere preference files and repeat #2 above
http://www.digitalrebellion.com/prefman/
http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

Similar Messages

  • Audio stopped in the timeline, not muted. Plays in preview, how do I get it back?

    Exiting CPTX did not reset either.

    Please, could you give more details? Just guessing: when you preview, play the slide you do not hear audio? In that case check the small audio icon on the Timeline, maybe you clicked it and it got muted? And with Preview you point to the other Preview modes (like project, in webbrowser, next 5 slides) when a temporary SWF is generated. Since audio plays there, it must be the small audio button that has been clicked.

  • How to get rid of a "not assigned" line in Bex

    Hello Experts,
    I feed a Cube with two ODS-Objects, one fpr orders and one for items.
    ODS1 provides the number of orders and
    ODS2 provides the number of items and the charachteristic item_type for the dimension item.
    Because the charachteristic item_type is not provided by ODS1 there is a "not assigned" line at the bottom of the table in Bex!
    How can I get rid of this line? I want to avoid usong seperate Cubes for Orders and Items!
    thanx
    hiza

    Hi Hiza.
    In the query designer restrict item_type to # -> right click on # -> exclude from selection.
    Hope it helps.
    BR
    Stefan

  • I need to convert PDF to Excel, however, columns and tabs make many merged cells and many blank columns. In addition to not separate the columns correctly, I see many not separate lines together in the same cell. I'm even thinking that Adobe Acrobat Pro D

    I need to convert PDF to Excel, however, columns and tabs make many merged cells and many blank columns. In addition to not separate the columns correctly, I see many not separate lines together in the same cell. I'm even thinking that Adobe Acrobat Pro DC has limitations. There is no way to define what points in columns to force break column? Nor create many columns that are useless? How does text to column in Excel, fixed size when we import text, and define where the breaks have columns?
    Google Tradutor para empresas:Google Toolkit de tradução para appsTradutor de sitesGlobal Market Finder
    Desativar tradução instantâneaSobre o Google TradutorCelularComunidadePrivacidade e TermosAjudaEnviar feedback

    PDF does not contain columns, rows, formats, styles, or other aspects of word processing or spreadsheet file formats.
    This is because PDF is decidedly not a word processing or spreadsheet file format or something "like" one of those.
    (see ISO 32000 for what PDF "is")
    What can optimize the export of PDF page content is to start with a well-formed tagged PDF (ISO 14289-1, PDF/UA-1 compliant).
    Without that export is what it is and one performs whatever content cleanup is needed using the native application for the export file (MS Word or Excel).
    Be well...

  • I have Windows XP / bootcamp and can connect to the internet via Wi Fi (Apple Express) but when I try to open Int. Explorer I get a message "cannot connect".  I checked to make sure IE is not off line.  Any suggestions please?

    I have Windows XP / bootcamp and can connect to the internet via Wi Fi (Apple Express) but when I try to open Int. Explorer I get a message "cannot connect" yet my computer is connected with a strong signal.  I checked to make sure IE is not off line.  Any suggestions please?

    Try using a different browser as a test.

  • FCP 7.0.3 ripple edit in timeline not working

    FCP 7.0.3, AVCHD/proRes 422 LT, ripple edit in timeline not working. Using the ripple tool, I click on the edit point, drag the cursor to the clip and direction I want to trim but it doesn't work. pop-up says collision on V-1. Same thing when I double-click the clip to player and try to move the edit point on the scrub bar. This was functional in prior sessions. What's happening? Thx in advance.

    I'm only using one (V1) track. Prior to this problem I was unable to insert edit. That problem mysteriously vanished after an unsuccessful phone support session w/ Apple failed to solve. Also when I try to insert w/transition (default cross-dissolve) the transition is applied to the opposite edit point,ie: out point of insert clip has transition instead of in point where it was applied. When I try to add transition to edit point (CMD-T) it doesn't work.
    I'm slowly working around the ripple edit malfunction by using the razor tool and ripple delete (shift-delete) to trim in the timeline.

  • Not getting Line Description in Account Analysis Report

    Hi Friends,
    There is requirement to get line description for account analysis report...
    Source - Cost Management
    Category - Receiving
    Event Type - Receipt into Receiving
    I have done required setup(Application Accounting Definition) to get the line description .I am getting line description for Debit transaction but for the same source and event type i am not getting line description for credit transactions..
    Is there any way to get line description for Credit transaction.
    Please suggest...

    Please friend...share knowledge on this...

  • Read a specific line of a txt file using vba not using line by line, Leer una Linea especifica de archivo de texto sin recorrer linea por linea

    Buenos días - Good morning
    Mi pregunta la escribiré en español y en ingles y espero alguien tenga la solución.
    I'll write my question in Spanish and English and I hope someone has the solution.
    SPANISH
    Creé una Macro en VBA que lee mas de 200.000 archivos de texto (.txt) los cuales tienen diferentes tamaños y cantidad de información dentro de ellos, de cada archivo necesito extraer la información de las 3 primeras lineas y las ultimas 10 lineas, las 3
    primeras lineas es fácil ya que uso un "READLINE" 3 veces y voy capturando la información de las tres primeras lineas, para las ultimas 10 lineas las cuales están identificadas por un código inicial hago un ciclo que lee linea por linea hasta que
    encuentra el numero 3 en un espacio especificado de la linea y de ahí captura la información de cada linea de texto que serian las 10 ultimas, el problema que tengo es que la cantidad de archivos y de información dentro de los archivos aumenta considerablemente
    cada día y por tener el ciclo que lee cada una de las lineas de cada archivo de texto la Macro se demora cada vez mas a medida que aumenta la información y consume cada vez mas memoria de la maquina.
    Necesito un método diferente que no lea linea por linea y que yo le pueda decir lea la linea (renglón) numero 1000 (ejemplo) y capture la información a partir de ahí para ahorrar algo de tiempo, o saber cuantas lineas de texto tiene el archivo .txt y decirle
    que me lea a partir de (numero total de lineas del txt -(menos) 10 lineas) así me leería las 10 ultimas.
    ENGLISH
    I created a Macro in VBA that reads more than 200,000 text files (.txt) which have different sizes and quantity of information within them, each file need to extract the information from the first 3 lines and last 10 lines, 3 first lines is easy as using a
    'READLINE "3 times and am capturing information from the first three lines, for the last 10 lines which are identified by an initial code I make a loop that reads line by line until it finds the number 3 in a specified area of ​​the line and then capture
    the information of each line of text that would be 10 last, the problem that I have is that the number of files and information within files significantly increases every day and having the loop that reads each line of each text file is delayed Macro increasingly
    as more information and consume more and more memory on the machine.
    I Need a different method not read line by line and I can tell you read the line (row) number 1000 (example) and capture the information from there to save some time or know how many lines of text have the file .txt and tell me read from (total number of lines
    of txt - (minus) 10 lines) so I would read 10 last.
    Here is the code I currently use
    Dejo el código que uso actualmente
    Dim fs, f, ts, REG
    Set fso = CreateObject("Scripting.FileSystemObject")
        On Error Resume Next
    sFilePath = strFolder & "\" & strFileName
    Set f = fso.getFile(sFilePath)
    Set ts = f.OpenAsTextStream(1, 0)
    REG = ts.READLINE
    Ciclo para llegar hasta las ultimas 10 lineas
    Cycle to reach the last 10 lines
    For J = 1 To 200000
                REG = ts.READLINE
                    If Val(Mid(REG, 6, 1)) = 3 Then

    Good Morning ryguy72
    First thank you so much for your answer, sorry for my english in the question, I tried for a long time to make a code that wasn't so slow to read the last 10 lines, 'cuz most codes used a cycle "For" to read line by line asking if in the specific
    position is the character(number) that tells me that i should get started to read the last lines that i need, that takes a lot longer than your code doing a Split with Mydata and storing it in strData(). I don't know how to do this and every forum that
    i consulted to read the last 10 lines quickly they made the same read line by line with a Cycle "for".
    Thanks again, I gonna improve my code with your help, 'cuz it took about 4 hours to read all the information and everyday ascended more time and memory consumption.
    Thanks to everyone who offered their help so disinterested and free, so should always be people with that spirit, I hope someday to be SO good as you programming.

  • Could not buy Line sticker, it shown "Your purchase wasn't completed successfully. Please check your [MY ORDERS] page.".

    Could not buy Line sticker, it shown "Your purchase wasn't completed successfully. Please check your [MY ORDERS] page.".

    I have the same problem. Two days ago, i brought my iPhone overseas to Malaysia (I'm Indonesian) and try to buy in-app item (Line Pokopang). But it can't be completed, it shown "your account doesn't exist"  and after i return to Indonesia, and try to make purchase on Line stickers, it shown "Your purchase.....", same as you got.
    I think the error message was from Line, not Apple because i can still buy ring tones, CMIIAW..
    And everytime i want to buy in-app item (Line games item), i can't be done. It shown many type of error message, depends on the game, such as "failed to purchase ruby", etc etc...

  • I CAN PRINT HP PAGES--- BUT NOT ON LINE PAGES

    I CAN PRINT HP PAGES BUT NOT ON LINE PAGES
    ERROR HAS OCCURRED IN SCRIPT ON THIS PAGE
    ERROR UNSPECIFIED

    Please read this post then provide some details.  What printer model? What operating system? How is the printer connected? 
    What browser are you using? Are you using HP Smart Printing or some similar program?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • WS_DELIVERY_UPDATE_2 is not upating line text

    I am trying to update Header and line item text using the FM WS_DELIVERY_UPDATE_2 with in the IDOC_INPUT_DELVRY. I have populated all the required prameters for line text in FM but it is not gettnig updated in delivery. Header text are getting updated without any issues. Could someone please help on this issue.
    IT_TEXTH-RFBEL = '800003709'
    IT_TEXTH-RFPOS = '000010'
    IT_TEXTH-TDOBJECT = 'VBBP'
    IT_TEXTH-TDNAME = '800003709000010'
    IT_TEXTH-TDID = 'Z057'
    IT_TEXTH-TDSPEAS = 'EN'
    APPEND IT_TEXTH
    IT_TEXTL-RFBEL = '800003709'
    IT_TEXTL-RFPOS = '000010'
    IT_TEXTL-TDID = 'Z057'
    IT_TEXTL-TDSPRAS = 'EN'
    IT_TEXTL-TDLINE = 'TEST TEXT'
    APPEN IT_TEXTL
    PASSING THIS INTO FM WS_DELIVERY_UPDATE_2 in table Parameters. The line item text is not getting updated.
    Thanks
    Senthil

    Hi Nabheet,
    Thanks for your reply. The WS_DELIVERY_UPDATE_2 was already used with in the standard IDOC posting FM 'IDOC_INPUT_DELVRY' but they were missing to pass text table parameters IT_TEXTH and IT_TEXTL. I wrote an enhancement to replace this FMwith added table parameters  IT_TEXTH and IT_TEXTL to pass the text however the header text is working but not the line item text when delivery posted thru IDOC.
    Thanks,
    Senthil

  • Authorising a computer that's not on line?

    How can I authorise an ordinary Windows computer to play purchased music, when that computer is not on line?
    Thanks,
    BC

    hi Brian!
    unfortunately, i believe that you have to get a computer on line at least momentarily in order to do the authorisation.
    here's an ultra-clunky workaround ... can you borrow a modem for a day? if so, why not try using an ISP "free trial offer" (or a brief subscription to one of the really inexpensive ISPs) to handle the PC authorisation and to confirm that the PC thinks any purchased music you've transferred to it really is authorised.
    love, b

  • KKA3 "Do not create line IDs of 'Settlement' cat. when defining assignmnt"

    Hi gurus,
    when i am runing KKA3 getting message "Do not create line IDs of 'Settlement' cat. when defining assignmnt rules". can any one guid me to come out from this issue.
    Regards,
    Ram

    Hi Ram,
    I am sorry, but as I wrote this might be not just the technical issue when you can simply change from category A to category N.  In OKG4 you classify the line ID to one of the SAP predefined categories, while in OKG5 you define the sourse for the line ID.  Both settings require understanding of business requirements and knowledge of many other things, not just Result Analysis, but also cost element coding rules, etc.  Try to get in touch with functional guys who are the design owners.
    Paulo

  • Error This Field Name is not Known Line...

    hi,
    on the one PC CRXI Deverloper Edition and Crystal Reports XI Runtime Files.msi are installed. The VBS-Scipt works perfect.
    On an other PC only Crystal Reports XI Runtime Files.msi is installed.
    Following error is displey:
    "Error This Field Name is not Known Line 32"
    http://www.bilderhoster.net/safeforbilder/251h16ca.jpg

    Moved to Legacy SDK forum.
    VBS is no longer supported. Use ProcessMonitor to help you find the missing dependencies or registry permissions.

  • Pencil & Paintbrush Tools do not show line while drawing

    I am using CS4.
    When I use the Pencil Tool or the Paintbrush Tool, I do not get the blue dotted "preview line" I am supposed to get. Actually, with the Paintbrush Tool, isn't it supposed to show the actual brush stroke as you paint?
    Anyway, it's very difficult to draw when I can't see what I am drawing at all. The final line only shows up when I release. Is there some setting I am missing?
    thank you

    Oops I do not know what happened I went back and as I realized that I was seeing it with the pencil tool and now I see it with the paint brush.
    I wonder why I wasn't seeing it seeing this?
    I would say reset your preferences on Windows i think you hold the control alt shift keys as you restart Illustrator. Or you move the Adobe Illustrator CS (#) Settings folder to a new location.
    C:>Documents and Settings > User >Application Data > Adobe > Adobe Illustrator CS2 Settings

Maybe you are looking for