Tlanes not being created for all locations for one product

Hello Experts - I need some advice on the following situation:
We have a set of products where tlanes are only being created for 3 locations out of many. What would cause the tlanes to not be generated for all locations if all master data elements are present? We have a valid inforec, mrp views, etc. I can't see anything different with the 3 locations that are working correctly.
Any help would be much appreciated.
Thanks!

Thank you for your resopnse:
To answer your questions, yes, we have done all of these things and the tlanes are still not being created. We have been using SPP for 6 months and this is the first time we've seen this problem. Do you have any other suggestions or is there any more information I can provide you that would be helpful in solving.
Thanks in advance for your advice.
AAF1999

Similar Messages

Emails not being recieved, tried removing all passwords, not being asked for one when I re-open thunderbird

stopped receiving emails 3 days ago to both accounts I have. On line at verizion I see the new emails but Thunderbird is not opening them. Any suggestions? Thanks

If you deleted all password in Thunderbrd and are not being asked for them that points straight at your anti virus program and it's "password vault" messing up. Try disabling email scanning in your internet security suite.

Change Pointers not being created for HR-PA Custom Infotype

Problem Description:
We have a custom Infotype in SAP to store the data for contingent employee - Infotype 9001. Change pointers is
turned on. We are running the program RBDMIDOC to send changes to Oracle IDM using message HRMD_A. The change
detected for all infotypes except 9001. For 9001, the change pointer is not created.
The following are the current configuration details:
IDOC Extension Created to Idoc type HRMD_A07 (ZHR_EXT)
custom segment zhr_seg
Change pointers are switched on.
Change pointers switched on for message Type HRMD_A.
IDOC configuration created for Port / Process code etc.
Maintenance of view T777D - Added ZHR_SEG.
If I add the segment ZHR_SEG as a 2nd segment to Infotype 0000, I dont get a syntax error. But the changes for Infotype 9001 are not picked up.
If I add the segment ZHR_SEG as a segment to Infotype 9001, I get a syntax error - check EDI: Syntax error in IDoc (mandatory segment missing) below.
EDI: Syntax error in IDoc (mandatory segment missing)
Message no. E0072
Diagnosis
The segment ZHR9001 has the attribute 'Mandatory' in the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT). However, the segment is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment is missing.
This error may have been triggered by an unidentifiable segment before the expected mandatory segment.
Procedure
Please check the IDoc or the syntax description of the basic type HRMD_A07 (customer enhancement ZHR_EXT).

Were you able to resolve the issue?
If yes, could you please share what was done to resolve it.
Your help will be greatly appreciated.

Wiki directories not being created for groups

I am trying to get the wiki service working for a few groups on my 10.5 server and not having much luck with it. I've enabled the wiki and blog services in Workgroup Manager for three of the groups on my server, but only one of them seems to have the corresponding directory tree created in /Library/Collaboration/Groups/
All three groups show up on the website. One works completely, but if I click either of the other two I just get a "404: No group with that name (groupname) hosted on this server" error page.
I tried faking it out by copying the directory structure from the one working group into a directory for one of the other groups, but that didn't seem to trick the server into working. I've tried restarting the Web server with no apparent effect.
What triggers the creation of the directories inside /Library/Collaboration/Groups/ and why is it not happening sometimes?

I have been having the same set of problems. After playing around for a couple of hours here is what I did to solve most of these:
1. Make sure that you have the full Domain Name (www.example.com) for your website in the web/general section of server admin. I just had example.com at first which caused some of my problems. Also, when accessing the site make sure you enter the full domain name (www.exmaple.com) into your browser. Omitting the www caused me to also get a 404 message when trying to access my groups.
2. Make sure that you have your server setup as an Open Directory Master.
3. Make sure that your users and groups are not created in a local directory but instead are done in the LDAP. I had my users and groups created in the local directory which caused them not to properly work when I was trying to select users/groups in the Web Services section for my sites.
P.S.
Maybe I am just a little ******** but I think Apple could have made all this a little easier or at least documented it a bit better!

Why the hyperlink blue text is not being created for .cat & .ad domains? Is it for using Catalan language on them?

I was just trying to share a catalan website with a friend and I realized that the .cat domain was not being hyperlinked. Then I tried with a lot of domains such .es, .fr, .pt ... Finally I got that all domains are working well except for those with a catalan speaking like .cat or .ad (.ad is the domain for adorran websites, Andorra is a country dude!). As a Catalan speaker I'm really upset with you.
Usage details:
Device: iPhone 4s 16GB
Software version: iOS 8.2
Software language: Catalan & Spanish (I tried with both)
Tried apps: Whatsapp, iMessage, Notes & other Apple Apps.
PS: This is not happening with Android, I've asked for...

http://freelance-it.com.mx/forma-correcta-de-utilizar-la-pestana-drivers-dentro-de-mdt-2013/
Freelance-IT http://www.freelance-it.com.mx

Photos are not being created for all users on MySites.

I am currently syncing AD thumbnail photos to sharepoint 2010 SP1 Dec CU . I have configured everything properly and after the full profile sync I can see the binary data for the thumbnail photo. I have run the following command on
the Sync_DB to see the binary data.
Select sAMAccountName,SPS_MV_OctetString_PictureURL from MMS_Metaverse with(nolock) Where SAMAccountName like '%UserName%'
I then go to run the Update-SPProfilePhotoStore -CreateThumbnailsForImportedPhotos 1 -MySiteHostLocation <mySiteHostURL>.
Initially, this took awhile and looking at the library of the photos, a large percentage of users photos were created but there are a lot of photos missing for users in the organization. This is actually affecting my photo so I can see that in
the library, I do not see the three specific photos for myself BUT the binary data for the picture is in the Sync_DB.
The problem is that running the Update-SPProfilePhotoStore only does a portion of the photos. I have re-ran the powershell command multiple times and still not getting additional photos created. The DB does not have any restrictions on growth
and there are no errors on the DB side.

I followed up with Brian and the fix was a multiple step process:
He enabled the User Profile Service (From Manage Services On Server) on all Application servers, then ran a full user profile sync, and then ran the Update-SPProfileStore PowerShel cmdlet again. This added a few more photos, but still not all.
I pointed him at this link:
http://matthewyarlett.blogspot.com/2012/09/profile-photos-not-synchronising-from.html which gives a PowerShell command to check what each user's PictureURL property is set at. He noticed that some URL's had the mysitehosturl:80 in them and some did not.
By using the script in the link sent he was able to remove the :80 from the URL's and then everything started working. Also, I believe he removed the %20 from some of the URL's as described in that link.
Regards,
Andrew J Billings
Portal Systems Engineer//MCSA,MCSE
Blog:
http://www.andrewjbillings.com
Twitter:   LinkedIn:

Portable Home Directory (PHD) not being created for new users

Creating users in the Workgroup Manager also created their home directories at the time I created it when we were using Leopard 10.5 server.
But now that it is upgraded to 10.6 server, it doesn't do anything when I create a new user and tell it to "Create Home Now".
Any idea how to fix this?

Assuming that the server is properly configured (most importantly DNS) try running sudo createhomedir -a
and see what that does. In my experience, clicking the create home now button doesn't always work.
See here for more info on this command.
http://support.apple.com/kb/TA21050?viewlocale=en_US
Note that this has worked for me on 10.3 to 10.5 Server - I've not tried it with 10.6.
Jeff

Dm_os_performance_counters not being created for "some" new databases

I have noticed that a couple of our SQL 2008 R2 Ent (10.50.4286) servers are having trouble creating the os performance counters (database level only). I rebooted each of them during a planned downtime and the problem cleared. A few days later I added
two new databases to one of the previously affected servers. Nothing special about either database in fact their just empty shells our development team with populate later. The first database didn't get any performance counters generated for
it. The second populated just fine. I confirmed through perfmon that I couldn't find the first database in the list of choices. I am sure a reboot will probably clear the problem. However, these are production servers so chances to
reboot them only come around once per quarter. I have run the unload and reload counters command and it had no affect.
Anyone else having this issue?

Hi,
Are there any relative entries were logged in the application log?
There are two good articles on related issue:
Perfmon counters missing for newly added database in sql server 2005
http://blogs.msdn.com/b/batala/archive/2011/03/15/perfmon-counters-missing-for-newly-added-database.aspx
Troubleshooting: SQL Server (2005, 2008) Performance Counter Collection Problems
http://blogs.msdn.com/b/psssql/archive/2009/03/03/troubleshooting-sql-server-2005-2008-performance-counter-collection-problems.aspx
Thanks.
Tracy Cai
TechNet Community Support

I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

If the external drive can be seen at all in Disk Utility, follow the instructions for repair here.

Reasons for billing documents not being created ?

I am trying to create a billing document from a delivery (VF01). When I enter document number and save, it says 'no billing documents genereated, see the log'. Where to see the log and what do you think could be the possible reasons for billing document not being created ?
Thanks in advance,
Krishen

Hi,
In VL02 transaction, Its the 2nd button on the toolbar With an `!` mark on the icon along with triangle. CLick that button. It will display the errors bcz of which delivery is not created.
In VL01, goto EDIT-> LOG.
The explanation of errors is usually pretty detailed.
Best regards,
Prashant

Suppliers which are active and not being involved for a long time

Hi All,
Is there any way we can find suppliers which are active but not being used for a long time (for a specific duration) . i.e being involved in no open POs or no invoices processed or no payments made.
Please advice.
Thanks

Hi Abhi,
I have created some queries for the same. COuld you help me if I am going in the rite direction.
I have created a query to find the suppliers which are not being used in the POs for the past one year by using the below query: But for invoices and payments to be included, I am finding it a bit difficult....need help..............
--FINAL QUERY
SELECT vendor_id, vendor_name, creation_date, last_update_date
FROM po_vendors v
WHERE v.end_date_active IS NULL
AND v.enabled_flag = 'Y'
AND NOT EXISTS (
SELECT 1
FROM po_headers_all h
WHERE h.vendor_id = v.vendor_id
AND h.creation_date(+) BETWEEN (SYSDATE - 365) AND (SYSDATE))
ORDER BY vendor_id DESC
Is it possible to send me the program so that it would be helpful for me to use it.
email: [email protected]
Help Greatly appreciated.
Thanks
Aman

Overhead user exit (COOM0001) not being triggered for specific plant

Hello all,
I was wondering if anyone came across this situation before. I activated user exit COOM0001 for overhead calculation. This user exit is triggered when I create PCE for plant A but not plant B.
I can't figure out why it is not being triggered for plant B at all. I put a break point in function module EXIT_SAPLKASC_001, EXIT_SAPLKASC_002 and EXIT_SAPLKASC_003 and the system didn't stop in anyone of these function module.
Any help is greatly appreciated.
Regards,
Cassandra

Hi
It seems that you are a Functional Consultant.
Please follow the following simple step for any userexit to see where all its been called.
1. Go To T. Code SMOD
2. Enter the Exit name COOM0001
3. Click on the COMPONANTS RADIO BUTTON and DISPLAY
4. U get Function Modules
EXIT_SAPLKASC_001
EXIT_SAPLKASC_002
EXIT_SAPLKASC_003
5. Now individually double click on each FM and put a break point ther.
6. Open a new session and see wheather it stop at the break-points of the T. code you are looking for.
I havent used this user exit, so no comments on how it ll be use ful.
Reward points if useful
Thank-You
regards
vinsee

My ipad 2 will cut off completely if not being used for a while. you have to hold power button to power up everytime. anyone else having this problem? thanks

My Ipad 2 will shut completely down if not being used for a while. You have to hold power button down for several minutes before it will power back on. anyone else have this problem and know how to fix? My other sons ipad 2 doesnt do this and they have both had updates and are same generation.
Thanks

I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot!

ORA-20100: AppDomain could not be created for the specified security level

We recently updated our development environment to Visual Studio 2010. We have previously deployed (with success) .Net stored procedures from Visual Studio 2005 to our Oracle 10gR2 database. I am currently trying to configure a local instance (called local) of Oracle 10gR2 database to test deployment of .Net stored procedures to Oracle 10gR2 via Visual studio 2010 and ODT version 11.2.0.1.2. I have built the demo from the ode developer guide and gotten as far as deploying it but executing the stored procedures from VS 2010 or SQL*Plus produces the following error...
ORA-20100: AppDomain could not be created for the specified security level
ORA-06512: at "SYS.DBMS_CLR", line 152
ORA-06512: at "SCOTT.GETDEPTNO", line 7
Here is what I have done.
(Server)
1. Installed oracle 10gR2 with ODE.Net
2. Installed Oracle 10gR2 patch set 22
3. Installed ODE upgrade from Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21
(Client)
4. Installed Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21 (In new client home).
5. Installed patch set 22 on 10g client home.
6. Installed Oracle 11g Release 2 ODAC 11.2.0.1.2 with Oracle Developer Tools for Visual Studio(in new 11g client home, only for VS 2010)
I have made some minor changes (GAC) etc. per the following threads...
ODE.NET 11.1.0.7.20 on 10g Database?!
Re: Error: System.TypeInitializationException
The database appears to be fully functional via TOAD - SQL plus etc. I can't find much on this error but it appears Oracle needs some permissions to launch an ASP.Net application that it does not have. Any help would be GREATLY appreciated, don't hesitate to ask for additional details.

The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

Notifications are not being generated for any emails that have rules applied to them.

Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria. PLease check
1) whether your rule has trun on alert supression
2) Close the alert, craised by rule, and do it again
Roger

Tlanes not being created for all locations for one product

Similar Messages

Maybe you are looking for