TLB order are not picking all PO in APO

Hi Expert,
TLB order are not picking PO in APO.Order has missing PO.
for ex :
Ord 1 ; 10 lines with 20 qty of PO
Ord 2 : 5 lines with 20 qty of PO (here lines should be 10 instead of 5)
I appreciate your immediate response
Thanks
Vijay Job

Hi
I found the mistake. The address ( shift F5 ) in OX10 does not get transported in transport request , thought the plant gets copied from eg. client 100 to client 200.
So I manually entered the address for the target client eg 200 here, and then the dropdown list now shows all plants.
Thanks
kamala

Similar Messages

TDS liability line items are not picking in u2013 J1INCHLN

Hi Experts
During depositing of TDS through J1INCHLN it is not picking all line items i.e. available in Ledger (FBL3N). We came to know after reconciliation even as all line items are available in table With_item as uncleared.
We are facing this problem as the data from 01.03.2009u2026. Previously everything was working fine.
One more thing I will stress here that we have started Purchase Order based invoice verification also from this period.
Pl help ASAP.
Regards
Kuldeep Dubey

check the line of TDS is having the Business Place, if the business place is not capturng in TDS line items , then the create the substitution for Business Place & Section Code.
without business place in TDS line items you can't make the TDS payment.
Regards
Akmal

Excise value are not pick

hi experts
hi i have a problem while doing billing document against sales order and outbound delievery excise values are not pick by the system.but in the sales order it is showing . please help to resolve this issue ..

Dear Farhan,
Just take a help of an SD consultant it is a matter of 2 min for him to solve this issue.
still Go to tcode VTFL
and search for your delivery type and your billing type and double click on the same,
2.Then you will have an item folder on the left side click on that and you will get the list of all item category.
3. Double click your item category YP05 and on the right side lower end you will get the Price type - in that enter "D" instead of "G"
and Save it. then transport it to your quality and do the sales order process again.
REgards,
Sudhir

FTP-adapter not picking all files

Hi,
We have scenario, where FTP should pick a file and post it as a idoc to SAP. Now it happens that FTP pick's some files and leaves some out.
The parameters are:
File name = *
Connection mode = Per file transfer
Quality of service = Exactly once
Poll interval (secs) = 3000
If I look at the adapter monitoring the last polling interval was done yesterday morning. How's that possible if interval is 3000 seconds?

Hi Tapio,
We also faced the same problem but it was with NFS protocol. Can you pls check with the help of your System Administrator, after putting some more new files into the relevant folder and see what all are the privileges that is coming to each file and also the user group its saying for the files, especially the ones which are not picked.
There is a chance that the one which is not picked can be of a different user group and your FTP user is belonging to different user group.
We are in XI 3.0 SP15..
Pls check the same.
Cheers
JK

Some of the orders are not appearing in KOC4

Hi,
While running the trnasaction KOC4, Some orders are not appearing.which are appearing in KKBC_ORD.
Please guide me how to get the same in KOC4.
Thanking you in anticipation.
With regards
Aniruddha

Some pages may not have all the fields in the xml even though they are being shown on the UI.
Possible reasons I can think of are:
1) Beans are rendered dynamically through controller code
2) Page is using regions or other pages by extending them. There is Extends property in Property Inspector and if filled, those attributes from the extended page can also be seen.
3) Personalization to add elements on the page
-- Thanks

Payment order are not defined for extended withholding tax

Hi Gurus,
Would you please help me with the message below. It appears on F110 when I try to pay a vendor open item with extended withholding tax:
Message FZ626 -Payment orders are not defined for extended withholding tax
In my company payment orders are created in F110 for accounts payable, as we use another ERP system (Baan) to perform the local accounts payments, and now I've just activated Extended withholding tax functionality With accumulation (necessary in Brazil) but I get this error.
Is it not possible to user payment order with extended withholding tax + accumulation? I find it hard to believe...
I've tried to unflag the payment order only for the payment method I'm using in FBZP t.code, but then no payment order were created but instead a payment document were posted with the withholding tax accumulation, but this is not the way we are working, and nothing is sent to Baan
any help is welcome

The payment method "Y" the option "payment order only" was marked?
For a withholding tax type with accumulation in a company code with extended withholding tax payment
methods that create only payment orders can´t be used. Payment orders can only be created only if there are
no tax types with accumulation involved in the paid items of the payment run.
The functionality extended withholding tax works fine for Brazil
however, you can´t use the payment order with this functionality.
Please, review your customizing for payment method 'Y" in transaction
FBZP.
Best regards,
Leonardo Vedovelli
FI Support Engineer
SAP Active Global Support

Some Sales Orders are not replicating into CRM

Hi guys,
when I check SMQ2 in CRM, I find that some sales orders are not replicating into CRM, then check the error, its says check SMW01..
when I check the SMW01 it says validation error and BDOC status is F05 (information no processing). I tried to search the sales order in CRMD_Order transaction could not find the sales order...
*Error in SMW01*
Processing of document with Guid E01D11C71856C4F1AEBF0024E84DD0CE is canceled CRM_ORDER
Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG. SMW3
It's not giving much clue what's the error is...
I tried to setup a request to replicate those sales orders.. those request also end up in the same error...
any help on this?
thanks,
Ken

Hello Ken,
When reprocessing a BDoc(via SMW01) you might need to set a flag.
Goto trxn. SMW01. Start the debugger using command '/h' and reprocess the BDoc. After going into the debug mode press SHIFT+F7 and put a breakpoint at 2nd Tab in : class:cl_smw_flow and method 'restart_processing'. Keep debugging(F5 or F6 accordingly) until you find the requisite flag l_retry_allowed and set it as 'X'. This will allow you to reprocess the Bdoc.
Thanks,
Rohit

Third party sales orders are not showing in Billing due list (VF04 )

Hi,
In Billing due list Third party sales orders are not appearing because VKDFS table those entries are there. How can we get Third party sales orders in VKDFS table as well as VF04 ?
Please suggest me.
Regards,
KUR

Hi Kur & Sandepp,
Check this notes:A) Note 210500 - Billing status of a third-party item,B)2) Note 210561 - When is a third-party item displayed in VF04.
Re
Regards,
Madhu.

I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time.

I sometimes have blue and red square-shaped dots appear on my MBP; especially but not exclusively when I'm watching videos. The dots don't stay in the same place; and also they are not there all the time. Also, sometimes my animations (applications opening, windows being dragged, etc.) will glitch as well. Again, this is not a continual thing; it just happens variously throughout my day. MBP Model A1212, OS X 10.6.8, 2.33 Ghz 3GB RAM.

Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

Planned orders are not taking into account the processing time

Hi,
Could you please tell me why planned orders quantities are not based on processing time from the material master.
Materials was set before with 1 day in house production , no matter of lot size.
Based on routings I updated material master with processing time depending on lot size.
What is bottering me now is that planned orders are not taking into account processing time. (e.g. based on my processing time 1000 pce are produced in 3 days, but planned orders show me that 1000 pce are still need in 1 day , but it can not be produced in 1 day ).
what did I miss?
Thanks a lot for any information!

Hello Simona
The in house production time from tab MRP 2 is lot size independent.
However, on tab work scheduling you can define a lot size dependent times.
Please observe that, if you have entered an in house production time, the processing time will not be considered. The F1 help of the field provides the following explanation:
You can define work scheduling times in the material master record in one of two ways:
Either you enter the in-house production time. If required, you can get the system to update this value from the routing.
Or you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
Therefore, if you want to consider the processing time, you should remove the in house processing time.
BR
Caetano

Message FZ626 -Payment orders are not defined for extended withholding tax

Hi Gurus,
Would you please help me with the message below:
Message FZ626 -Payment orders are not defined for extended withholding tax
In my company payment orders are created in F110 for accounts payable, as we use another ERP system (Baan) to perform the local accounts payments, and now I've just activated Extended withholding tax functionality With accumulation (necessary in Brazil) but I get this error.
Is it not possible to user payment order with extended withholding tax + accumulation? I find it hard to believe...
I've tried to unflag the payment order only for the payment method I'm using in FBZP t.code, but then no payment order were created but instead a payment document were posted with the withholding tax accumulation, but this is not the way we are working, and nothing is sent to Baan
any help is welcome !
TREAD LOCKED SINCE IT IS DUPLICATED FROM THREAD payment order are not defined for extended withholding tax

Hi,
On the analysis, the system expects an entry in the T059Q table with
code as XX.
The reason being in the extended withholding tax we use multiple
witholding tax codes and these entries are stored in the table
with_item. And in BSEG we populate the field withholding tax code i.e.
BSEG-QSSKZ with the value 'XX'. In classical withholding tax we used to
store the code directly which is not possible with Extended withholding
tax.
As the field BSEG-QSSKZ refers to the values in the table T059Q-QSSKZ
the entry 'XX" needed in this table for the corresponding country of the
company code to maintain the correct relationship and consistent
database information.
Hence for the statistical purpose and for the internal calculations we
need an entry in the table T059Q. Could you please maintain this code
i.e. 'XX' also in the table T059Q in a test system? Then retest your issue.
This should resolve your issue.
Kind Regards,
Vanessa.

HT1349 My songs in iTunes are not playing all the way through on my MAC or my iPod?

My songs in itunes are not playing all the way through on my MAC

Quicktime Player should already be installed on the Mac. If you transferred Quicktime from a VAIO it will not run on a Mac -- no PC software will without using a special interface.
Right click or control+click on one of the files, then > Open with Quicktime Player.
I already suspect that since these files will not play completely on any of your devices that you have an incomplete download.
Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; only apps, books (not audiobooks), music, and t.v. shows (not movies). Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can redownload your available previous purchases.

Smartview webf run time prompts upon submit are not picking up from the POV

Hi ,
I am in Planning 11.1.2.1 and using Smartview 11.1.2.1.103. After connecting to Planning Webform from Smartview, i am saving a composite form which should launch a Business Rule with run time prompts attached to the webform upon submit. The business rules are running with default run time prompts and it is not picking up the members from the POV ... is there a way to make it pick up the members from POV into the run time prompts upon saving it ? so far the workaround is to initiate the business rule from the planning tab in smartview .. any thoughts on this ? cheers

I found a known issue for smart view in 11.1.2.1 read me doc
11075506
When you open a data form in Smart View, if a business rule is directly attached to a composite data form that is set to Use Members on Data Form and Hide Prompt, the runtime prompt values are not picked up. Instead, the Runtime Prompt dialog box is displayed, and the user is prompted to enter a value.
Good Luck

My photos from camera row are not going all to photostream in any device, iphone 4s and ipad mini What can I do, please.

My photos from camera row are not going all to photostream in any device, iphone 4s and ipad mini What can I do, please.
Both devices have the Icloud on.

Try this on All Devices...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Songs on my iTouch are not playing all the way through

Hello,
I have an iTouch 5th generation. The songs on it are not playing all the way through or simply do not play for the entire duration of song. The songs that do not play all the way through leaves the rest of the song being 'played' with no sound. Another problem is that the current song will stop playing in the beginning, middle, or the end and another song starts. The next song will begin play while the current song continues to play, but with the current song having an absence of sound. It's kind of hard to describe. All of this started to happen after my iTouch crashed and I had to restore it. There is also another thing that factors into this problem. Most of the songs that are not working are the ones that I have bought from iTunes. I have also discovered that there are some other songs that I have downloaded from CDs that are not working, as well. The songs that I have bought from iTunes and have downloaded from CDs work properly on my other iPod and on my computer. So, I am thinking that the problem lies with the iTouch, itself.
Some of the things that I have tried are taking all of the music off of my itouch and then reloading it again on it. That did not work. Then I figured that I would load a single playlist with a problematic album. This did not work. I then tried taking that playlist off and then reloaded all of my library onto my iTouch. That didn't work either. Another issue is that I don't know if I can redownload the music that I bought off of iTunes to correct the problem. Another issue that goes along with this is that I had bought all of my music on another computer. I don't know if that makes a difference, but, again, I really don't think it is the songs that are the problem.
I have also made sure that my computer doesn't go to sleep when I load my music onto my iTouch and that my external (which stores my entire music library) does not go to sleep.
All of my apps work and everything else seems fine.
I really cannot figure out this problem. Does anyone have any suggestions?

A couple of months ago, I went to the Apple Store to try and sort this problem out. I was told that I was not playing my songs out of an actual music library. I created a library and loaded all of my songs, movies, etc. onto it. I had found that when I synced my songs from the new library onto my itouch, the songs no longer stopped in odd spots or bled into each other. To ensure that most of my songs had been fixed, I played the ones that were the most problematic. Fortunately, the songs play all the way through without any interruption. So far, I have not encountered the same problems that I had posted in my question. I apologize for not knowing the fellow's name who helped me with my iTouch at the Apple Store, but I would like to say how thankful and happy I am now that my iTouch no longer skips to the next song.
I know that other people have had this same issue with their iPods. If you encounter your music not playing correctly, I would suggest that making a new library and loading all of your music into the new one may help correct the problem. I hope that this helps.

TLB order are not picking all PO in APO

Similar Messages

Maybe you are looking for