TLB Profile parameters in TLB Order
Hi
When we create TLB orders in interactive TLB, the system uses the TLB profile attached in the T-lane master data. However we have the option of selecting a different TLB PROFILE during the run.
After we create such orders with TLB profile different than the one in T lane master, we want to see what TLB profile was used while creating a particular TLB order.
Is there a way to find this.
For example in a particular source destination MOT combination there are 5 TLB orders created. One of these is created with a different TLB profile than that in T lane.How do we find which order is that and with what TLB profile it was generated.
Nitin
Look at this weblog ,it explains how to configure TSTC_PAR and how to launch R/3 transaction from ICWC.
/people/raja.g/blog/2007/01/24/displaying-r3-transaction-in-icwc-application
Thanks,
Thirumala.
Message was edited by:
Thirumala Reddy Kalluri
Similar Messages
-
User exit for incoming PO - (PO is created by CIFing TLB order to R/3)
Hi All,
I need to find out the APO INBOUND user exit for reciving the PO information from the connected R/3 system. Initially a TLB order is created in APO and CIFed to APO and after the PO is created in connected R/3 system this PO number and related information is CIFed back to APO and this TLB order is replaced by the R/3 PO number.
Please help me outto gain full points.
Thanks in Advance,
Chandan DubeyHi,
I am not clear with ur query and therefore check out the list of Inbound and outbound Idoc user-exits:
IDoc Inbound User Exits
1. ACC_BILLING
Accounting: Post invoice (OAG: LOAD RECEIVABLE)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
2. ACC_EMPLOYEE_EXP
FI/CO: HR posting GL (AcctngEmplyeeExenses)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
3. ACC_EMPLOYEE_PAY
FI/CO: HR posting AP (AcctngEmplyeePaybles)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
4. ACC_EMPLOYEE_REC
FI/CO: HR posting AR (AcctngEmplyeeRcvbles)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
5. ACC_GL_POSTING
Accounting: General G/L account posting
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
6. ACC_GOODS_MOVEMENT
Accounting: Post goods movement (OAG: POST JOURNAL)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
7. ACC_INVOICE_RECEIPT
Accounting: Post invoice receipt (OAG: LOAD PAYABLE)
ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
8. ACLPAY Accounting: Inbound invoice
ACCID001 EXIT_SAPLACC1_031 IDoc ACLPAY: Userexit for creditor in accounting document
ACCID001 EXIT_SAPLACC1_032 IDoc ACLPAY: Userexit for GL posting in accounting document
ACCID001 EXIT_SAPLACC1_033 IDoc ACLPAY: Userexit for taxes in accounting document
9. ACLREC
Accounting: Billing document
ACCID001 EXIT_SAPLACC1_011 IDoc ACLREC: Userexit for debitor in accounting document
ACCID001 EXIT_SAPLACC1_012 IDoc ACLREC: Userexit for GL posting in accounting document
ACCID001 EXIT_SAPLACC1_013 IDoc ACLREC: Userexit for taxes
10. ACPJMM
Posting in accounting from materials management
ACCID001 EXIT_SAPLACC1_021 IDoc ACPJOU: Userexit for GL posting in accounting document
11. ARTMAS
Create and change of material master (Retail)
MGV00003 EXIT_SAPL1001_003 Enhancement for article master: IDoc inbound
12. BLAOCH
Purchasing contract change
MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
13. BLAORD
Purchasing contracts
MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
14. BLAREL
Release order documentation for distributed contracts
MM06E001 EXIT_SAPLEINM_004 Customer enhancements for release documentation inbound
15. COND_A
Conditions: master data for price determination
VKOI0001 EXIT_SAPLVKOI_001 Interchange of Conditions: Inbound Processing Modifications E1KOMG Segment
VKOI0001 EXIT_SAPLVKOI_002 Interchange of Conditions: Inbound Processing Customer Segments
16. CREMAS
Distribute vendor master
VSV00001 EXIT_SAPLKD02_001 Inbound: Read and process vendor segments
17. DEBMAS
Customer master
VSV00001 EXIT_SAPLVV02_001 Inbound: Read and update additional customer master segments
18. DELINS
Delivery schedule/JIT schedule
VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
VED40001 EXIT_SAPLVED4_002 Copying Data to Screens for Incoming EDI Docs
VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
19. DESADV
Delivery: Shipping notification
LMELA010 EXIT_SAPLEINM_010 Customer enhancement shipping notification inbound: line item
MM06E001 EXIT_SAPLEINM_006 Customer enhancements for shipping notification inbound
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
20. DOCMAS
Master document
CVDS0001 EXIT_SAPLCVALE_001 Userexit for ALEDVS (DOCMAS inbound)
21. DOLMAS
Document-object links
CVDS0001 EXIT_SAPLCVALE_003 Userexit for ALEDVS (DOLMAS inbound)
22. EDLNOT
EDL delivery notes
VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
VED40001 EXIT_SAPLVED4_002 Copying Data to screens for Incoming EDI Docs
VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
23. FIDCC1
Send entire FI documents (user exit 003/4)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S002 EXIT_SAPLF050_004 FIDCC1 IDoc inbound: Change IDoc / do not process
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
24. FIDCC2
Send entire FI documents (user exit 005/6)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S003 EXIT_SAPLF050_006 FIDCC2 IDoc inbound: Change IDoc / do not process
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
25. FIDCMT
Sending single items for FI-GL
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
26. FINSTA
Bank Statement
FEDI0005 EXIT_SAPLIEDP_201 FI-EDI: inbound - bank statement/ Lockbox - Final processing
FEDI0005 EXIT_SAPLIEDP_202 FI-EDI: inbound - bank statement/ Lockbox - Processing of segments
27. FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
28. GSVERF
Cred. memo procedure
VED50001 EXIT_SAPLVED5_001 User Exit for Condition Value Tolerances in the Self- Billing Procedure
VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
29. HRMD_A
HR: Master data and organizational data (appl. system)
RHALE001 EXIT_SAPLRHA0_002 HR-CA: ALE inbound processing: Export parameter
RHALE001 EXIT_SAPLRHAL_002 HR-CA: ALE inbound processing: Change info type data
RHALE001 EXIT_SAPLRHAL_004 HR-CA: ALE inbound processing: conversion segment/ info type
30. INFREC
Purchasing info record
MMAL0004 EXIT_SAPLMEAI_004 ALE source list distribution: inbound processing userdefined data
MMAL0004 EXIT_SAPLMEAI_003 ALE purchasing info record distribution: inbound processing segments
31. INVOIC
Invoice / Billing document
FEDI0001 EXIT_SAPLIEDI_001 FI-EDI: Invoice receipt - Determine G/L account per invoice line
FEDI0001 EXIT_SAPLIEDI_002 FI-EDI: Invoice receipt - Determine add. acct assignm. per line item
FEDI0001 EXIT_SAPLIEDI_003 FI-EDI: Invoice receipt - Fill the screen field 'Allocation'
FEDI0001 EXIT_SAPLIEDI_004 FI-EDI: Invoice receipt - Determine the segment text
FEDI0001 EXIT_SAPLIEDI_005 FI-EDI: Invoice receipt - Determine the name of the BDC session
FEDI0001 EXIT_SAPLIEDI_011 MM-EDI: Invoice receipt - Determine purchase order item
FEDI0001 EXIT_SAPLIEDI_101 FI-EDI: Invoice receipt INVOIC01 - additional assignment
FEDI0001 EXIT_SAPLIEDI_102 FI-EDI: Invoice receipt INVOIC01 - add data
FEDI0001 EXIT_SAPLIEDI_111 MM-EDI: Invoice receipt INVOIC01 - additional assignment
FEDI0001 EXIT_SAPLIEDI_112 MM-EDI: Invoice receipt INVOIC01 - add data
MRMH0002 EXIT_SAPLMRMH_011 Logistics Invoice Verification:inboud EDI message, company code
MRMH0002 EXIT_SAPLMRMH_012 Logistics Invoice Verification:inboud EDI message, control flags
MRMH0002 EXIT_SAPLMRMH_013 Logistics Invoice Verification:inboud EDI message, assignment
MRMH0002 EXIT_SAPLMRMH_014 Logistics Invoice Verification:inboud EDI message, segments
MRMH0002 EXIT_SAPLMRMH_015 Logistics Invoice Verification:inbound EDI message, before posting
32. LIKOND
Listing conditions
WSOR0001 EXIT_SAPLWSOI_001 Enhancement for assortments: inbound IDoc
33. MATMAS
Material Master
MGV00001 EXIT_SAPLMV02_002 Enhancement for material master IDoc: Update
34. MRESCR
Create reservation
SAPLMEWB EXIT_SAPLMEWB_001 Customer exit for processing of reservations via BAPIs
35. ORDCHG
Purchase order/order change
MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
VEDB0001 EXIT_SAPLVEDB_001 SD EDI incoming change orders: read additional data from IDoc
VEDB0001 EXIT_SAPLVEDB_002 SD EDI incoming change orders: additional data for dynpros
VEDB0001 EXIT_SAPLVEDB_003 SD EDI incoming change orders: further activities after calling
VEDB0001 EXIT_SAPLVEDB_004 SD EDI incoming change orders: closing activities per
VEDB0001 EXIT_SAPLVEDB_005 SD EDI incoming change orders: closing activities by order block
VEDB0001 EXIT_SAPLVEDB_006 SD EDI incoming change orders: setting order type
VEDB0001 EXIT_SAPLVEDB_007 SD EDI incoming change orders: additional checks of IDoc
VEDB0001 EXIT_SAPLVEDB_008 SD EDI incoming change orders: error handling
VEDB0001 EXIT_SAPLVEDB_009 SD EDI incoming change orders: additional checks of IDoc segments
VEDB0001 EXIT_SAPLVEDB_010 SD EDI incoming change orders: manipulation of status ecords
VEDB0001 EXIT_SAPLVEDB_012 SD EDI incoming change orders: change internal table
36. ORDERS
Purchase order / order
MCP20008 EXIT_SAPLMCP2_008 User exit: Processing of purchase order header
MCP20008 EXIT_SAPLMCP2_009 User exit: Processing of purchase order item
37. ORDERS
Purchase order / order
MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
VEDA0001 EXIT_SAPLVEDA_001 SD EDI incoming orders: read additional data from IDoc
VEDA0001 EXIT_SAPLVEDA_002 SD EDI incoming orders: additional data for dynpros
VEDA0001 EXIT_SAPLVEDA_003 SD EDI incoming orders: further activities after calling
VEDA0001 EXIT_SAPLVEDA_004 SD EDI incoming orders: closing activities per order
VEDA0001 EXIT_SAPLVEDA_005 SD EDI incoming orders: closing activities by order block
VEDA0001 EXIT_SAPLVEDA_006 SD EDI incoming orders: setting order type
VEDA0001 EXIT_SAPLVEDA_007 SD EDI incoming orders: number of ordering party
VEDA0001 EXIT_SAPLVEDA_008 SD EDI incoming orders: error handling
VEDA0001 EXIT_SAPLVEDA_009 SD EDI incoming orders: additional checks of IDoc segments
VEDA0001 EXIT_SAPLVEDA_010 SD EDI incoming orders: manipulation of status records
VEDA0001 EXIT_SAPLVEDA_011 SD EDI incoming orders: change internal table
WVFB0001 EXIT_SAPLWVFB_002 Customer exists for store order PO confirmationdata seg.
38. ORDRSP
Purchase order / order confirmation
MM06E001 EXIT_SAPLEINM_005 Customer enhancements for order confirmation inbound
MM06E001 EXIT_SAPLEINM_007 Customer enhancements inbound confirmation: reading
MM06E001 EXIT_SAPLEINM_008 Customer enhancements inbound confirmation: final
WVMI0001 EXIT_SAPLWVMI_003 ORDRSP VMI inbound, modification before creating purchase order
39. PORDCR
Create purchase order
SAPLMEWP EXIT_SAPLMEWP_002 Customer exit for processing of purchase orders via BAPIs
40. PREQCR
Create purchase requisition
SAPLMEWQ EXIT_SAPLMEWQ_001 Customer exit for processing of requisitions via BAPIs
41. PROACT
Stock and sales data
WVMI0001 EXIT_SAPLWVMI_002 IDoc PROACT inbound: prior to processing
42. REMADV
Payment advice
FEDI0002 EXIT_SAPLIEDP_101 FI-EDI: Incoming pmnt advice - Extended allocatn of IDOC -> applicatn data
FEDI0002 EXIT_SAPLIEDP_102 FI-EDI: Incoming pmnt adivce - Closing allocatn of IDOC -> applicatn data
43. REQOTE
Inquiry
VEDQ0001 EXIT_SAPLVEDQ_001 SD EDI inbound inquiry: read additional data from IDoc
VEDQ0001 EXIT_SAPLVEDQ_002 SD EDI inbound inquiry: additional data for dynpros
VEDQ0001 EXIT_SAPLVEDQ_003 SD EDI inbound inquiry: further activities after calling
VEDQ0001 EXIT_SAPLVEDQ_004 SD EDI inbound inquiry: closing activities per inquiry
VEDQ0001 EXIT_SAPLVEDQ_005 SD EDI inbound inquiry: closing activities by inquiry block
VEDQ0001 EXIT_SAPLVEDQ_006 SD EDI inbound inquiry: setting inquiry type
VEDQ0001 EXIT_SAPLVEDQ_007 SD EDI inbound inquiry: number of sold-to party
VEDQ0001 EXIT_SAPLVEDQ_008 SD EDI inbound inquiry: error handling
VEDQ0001 EXIT_SAPLVEDQ_009 SD EDI inbound inquiry: additional checks of IDoc segments
VEDQ0001 EXIT_SAPLVEDQ_010 SD EDI inbound inquiry: manipulation of status records
VEDQ0001 EXIT_SAPLVEDQ_011 SD EDI inbound inquiry: change internal table
44. SBINV
Credit memo procedure with invoice creation
VED50001 EXIT_SAPLVED5_002 User Exit for messages in the Self-Billing Procedure SBINV
VED50001 EXIT_SAPLVED5_003 User Exit for Tolerances in the Self- Billing Procedure SBINV
VED50001 EXIT_SAPLVED5_004 Customer-Function for changing invoice data SBINV
VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
45. SDPACK
Packing confirmation
VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0004 EXIT_SAPLVMDE_004 Shipping Interface: Message SDPACK (Packing, Inbound)
46. SDPICK
Picking confirmation
VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0003 EXIT_SAPLVMDE_003 Shipping Interface: Message SDPICK (Picking, Receipt)
47. SHP_IBDLV_CONFIRM_DECENTRAL
Confirmation (Inbound Delivery)
V50B0001 EXIT_SAPLV50I_002 User exit for BAPI Verification of Inbound Deliveries
48. SHP_IBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
V50B0001 EXIT_SAPLV50I_001 User exit for BAPI Duplication of Inbound Deliveries
49. SHP_OBDLV_CONFIRM_DECENTRAL
Confirmation (Customer Delivery)
V50B0001 EXIT_SAPLV50I_004 User exit for BAPI Verification of Outbound Deliveries
50. SHP_OBDLV_SAVE_REPLICA
BAPI Function Module for Duplication of Outbound Deliveries
V50B0001 EXIT_SAPLV50I_003 User exit for BAPI Duplication of Outbound Deliveries
51. SHPCON
Delivery: Shipping confirmation
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
52. SHPMNT
Shipping outbound
V55K0020 EXIT_SAPLV55K_020 IDoc SHPMNT: Modification Control/ Data before processing
V55K0021 EXIT_SAPLV55K_021 Processing of segments IDoc SHPMNT
V55K0022 EXIT_SAPLV55K_022 Update of user defined tables for inbound IDoc SHPMNT
53. SRCLST
Source List
MMAL0002 EXIT_SAPLMEAI_001 ALE source list distribution: inbound processing segments
MMAL0002 EXIT_SAPLMEAI_002 ALE source list distribution: inbound processing user defined data
54. SRVMAS
Master data service master
BASI0001 EXIT_SAPLBASI_001 Userexit IDoc inbound service master: segment
BASI0001 EXIT_SAPLBASI_002 Userexit IDoc inbound service master: database
55. TPSSHT
Shipping planning system: Transfer planned shipments
V56I0010 EXIT_SAPLV56I_010 IDoc TPSSHT01: Input of planned shipments: Modification of IDoc segments
V56I0010 EXIT_SAPLV56I_011 IDoc TPSSHT01: Input of planned shipments: modification of transport tab, processing
V56I0010 EXIT_SAPLV56I_012 IDoc TPSSHT01: Input of planned shipments: update of own tables
56. WHSCON
Delivery: Stock confirmation
V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
57. WMBBIN
Block Storage Bins
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI04 EXIT_SAPLLIDI_004 Customer enhancement for IDoc WMBBID01
58. WMCATO
Reversal/Reversal request for transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI03 EXIT_SAPLLIDI_003 Customer enhancement for IDoc WMCAI01
59. WMINVE
Inventory count input
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
MWMIDO09 EXIT_SAPLLMDE_003 Customer enhancement for message WMINVE
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
60. WMMBXY
IDoc Report goods movements in IM
MWMIDO08 EXIT_SAPLLMDE_002 Customer enhancement for message WMMBXY (goods movement) inbound
61. WMSUMO
Move storage unit
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI06 EXIT_SAPLLIDI_006 Customer enhancement for IDoc WMSUID01
62. WMTOCO
Transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI02 EXIT_SAPLLIDI_002 Customer enhancement for IDoc WMTCID01
63. WMTORD
Transfer order
MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
MWMIDO10 EXIT_SAPLLMDE_004 Customer enhancement for message WMTORD (Create TO) inbound
MWMIDO11 EXIT_SAPLLMDE_005 Customer enhancement for message WMTORD (Create TO) inbound
64. WMTREQ
Create/Cancel transfer order
MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
MWMIDI05 EXIT_SAPLLIDI_005 Customer enhancement for IDoc WMTRID01
65. WPUBON
POS interface: Upload sales documents (compressed)
WPUE0002 EXIT_SAPLWPUE_104 IDoc WPUBON01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_105 Check, whether transaction of IDoc WPUBON01 is compressable
WPUE0002 EXIT_SAPLWPUE_106 IDoc WPUBON01: processing user segment
WPUE0002 EXIT_SAPLWPUE_109 IDoc WPUBON01: after to inbound processing
66. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
WPUE0002 EXIT_SAPLWPUE_130 IDoc WPUFIB01: prior to update
WPUE0002 EXIT_SAPLWPUE_131 IDoc WPUFIB01: processing user
67. WPUFIB
POS interface: Upload Fin.Acc. interface SRS/POS
WPUE0002 EXIT_SAPLWPUE_132 IDoc WPUFIB01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_139 IDoc WPUFIB01: after to inbound processing
68. WPUKSR
POS upload cashier data
WPUE0002 EXIT_SAPLWPUE_120 IDoc WPUKSR01: prior to update
WPUE0002 EXIT_SAPLWPUE_122 IDoc WPUKSR01: processing user segment
WPUE0002 EXIT_SAPLWPUE_123 IDoc WPUKSR01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_129 IDoc WPUKSR01: after to inbound processing
WPUE0002 EXIT_SAPLWPUE_152 IDoc WPUTAB01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_159 IDoc WPUTAB01: after to inbound processing
69. WPUUMS
POS interface: Upload sales data (compressed)
WPUE0002 EXIT_SAPLWPUE_110 IDoc WPUUMS01: prior to update
WPUE0002 EXIT_SAPLWPUE_112 IDoc WPUUMS01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_113 IDoc WPUUMS01: processing user segment
WPUE0002 EXIT_SAPLWPUE_119 IDoc WPUUMS01: after to inbound processing
70. WPUWBW
POS interface: Upload goods movements
WPUE0002 EXIT_SAPLWPUE_140 IDoc WPUWBW01: prior to update
WPUE0002 EXIT_SAPLWPUE_141 IDoc WPUWBW01: processing user segment
WPUE0002 EXIT_SAPLWPUE_142 IDoc WPUWBW01: prior to inbound processing
WPUE0002 EXIT_SAPLWPUE_149 IDoc WPUWBW01: after to inbound processing
71. WVINVE
Store physical inventory / sales price revaluation
WVFI0001 EXIT_SAPLWVFI_001 Inbound IDoc store phys. inv.: override Customizing
WVFI0002 EXIT_SAPLWVFI_002 Inbound IDoc store phys. inv.: process customer segment
IDoc Outbound User Exits
72. ACCONF
Confirmation of IDoc processing from the application
ACCID002 EXIT_SAPLACC2_040 IDOC ACCONF: Confirmation of processing in application
73. ACLPAY
Accounting: Inbound invoice
ACCID002 EXIT_SAPLACC2_030 IDoc ACLPAY: Userexit for header in accounting document (outbound)
ACCID002 EXIT_SAPLACC2_031 IDoc ACLPAY: Userexit for creditor line (outbound) in accounting document
ACCID002 EXIT_SAPLACC2_032 IDoc ACLPAY: Userexit for general line (outbound) in accounting document
ACCID002 EXIT_SAPLACC2_033 IDoc ACLPAY: Userexit for tax line (outbound) in accounting document
74. ACPJMM
Posting in accounting from materials management
ACCID002 EXIT_SAPLACC2_020 IDoc ACPJOU: Userexit Userexit for GL posting header in accounting document
ACCID002 EXIT_SAPLACC2_021 IDoc ACPJOU: Userexit Userexit for GL posting line in accounting document
75. ARTMAS
Create and change of material master (Retail)
MGV00003 EXIT_SAPLMV01_003 Enhancement for article master IDoc: Create
76. BLAORD
Purchasing contracts
MM06E001 EXIT_SAPLEINM_016 ALE distribution of contracts outbound enhancement for IDocs
MM06E001 EXIT_SAPLEINM_017 ALE distribution of contracts outbound enhancement for IDocs
77. BLAREL
Purchasing contracts
MM06E001 EXIT_SAPLEINM_003 Customer enhancements of data segment for outbound release documentation
78. COND_A
Conditions: master data for price determination
VKOE0001 EXIT_SAPLVKOE_001 Condition Transmission: Derivation of Filter Object E1KOMG
VKOE0001 EXIT_SAPLVKOE_002 Condition Transmission: Customer segments
79. CREMAS
Distribute vendor master
VSV00001 EXIT_SAPLKD01_001 Outbound: Create vendor segments
80. DEBMAS
Customer master
VSV00001 EXIT_SAPLVV01_001 Outbound: Create additional customer master segments
81. DELPKB
KANBAN call
MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
82. DIRDEB
Preauthorized withdrawal
FEDI0003 EXIT_SAPLIEDP_003 FI-EDI outgoing payments: Save PEXR segments (customer directory)
83. DOCMAS
Master document
CVDS0001 EXIT_SAPLCVALE_002 Userexit for ALEDVS (DOCMAS outbound)
CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
84. DOLMAS
Document-object links
CVDS0001 EXIT_SAPLCVALE_004 Userexit for ALEDVS (DOLMAS outbound)
CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
85. FIDCC1
Send entire FI documents (user exit 003/4)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
F050S002 EXIT_SAPLF050_003 FIDCC1 IDoc outbound: Change data / do not send
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
86. FIDCC2
Send entire FI documents (user exit 005/6)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
F050S003 EXIT_SAPLF050_005 FIDCC2 IDoc outbound: Change data / do not send
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
87. FIDCMT
Sending single items for FI-GL
F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
88. FIPAYM
Payment data
FIPAYM01 EXIT_SAPLF11A_001 USER-EXIT: message type FIPAYM, header data, outbound
FIPAYM01 EXIT_SAPLF11A_002 USER-EXIT: message type FIPAYM, reference data, outbound
FIPAYM01 EXIT_SAPLF11A_003 USER-EXIT: message type FIPAYM, bank data, outbound
FIPAYM01 EXIT_SAPLF11A_004 USER-EXIT: message type FIPAYM, GL data, outbound
FIPAYM01 EXIT_SAPLF11A_005 USER-EXIT: message type FIPAYM, partner data, outbound
89. FIROLL
General ledger rollup for FI-GL (delta f. line items FIDCMT)
F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
90. GSVERF
Cred. memo procedure
MRMN0001 EXIT_SAPLMRMN_001 Outbound IDoc for ERS/consignment settlement
91. HRMD_A
HR: Master data and organizational data (appl. system)
RHALE001 EXIT_SAPLRHA0_001 HR-CA: ALE outbound processing: Enhancement for receiver
RHALE001 EXIT_SAPLRHAL_001 HR-CA: ALE outbound processing: Change IDoc
RHALE001 EXIT_SAPLRHAL_003 HR-CA: ALE outbound processing: conversion info type / segment
92. INFREC
Purchasing info record
MMAL0003 EXIT_SAPLMEAO_002 ALE purchasing info record distribution: outbound processing
93. INVOIC
Invoice / Billing document
LVEDF001 EXIT_SAPLVEDF_001 User_Exit controll data IDoc_Output_Invoic
LVEDF001 EXIT_SAPLVEDF_002 User_Exit customer enhancement of segments outbound invoice
LVEDF001 EXIT_SAPLVEDF_003 User_Exit to avoid reading package data
LVEDF001 EXIT_SAPLVEDF_004 EDI Invoice: customer enhancement for reading additional data
94. KANBAN
KANBAN call
MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
95. LIKOND
Listing conditions
WSOR0001 EXIT_SAPLWSOE_001 Enhancement for assortments: outbound IDoc
96. MATMAS
Material Master
MGV00001 EXIT_SAPLMV01_002 Enhancement for material master IDoc: Create
97. ORDCHG
Purchase order/order change
MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
98. ORDERS
Purchase order / order
MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
99. ORDRSP
Purchase order / order confirmation
MM06E001 EXIT_SAPLEINM_009 MM EDI ORDRSP: customer enhancements tolerances (quantities/ date/price)
MM06E001 EXIT_SAPLEINM_014 MM EDI ORDRSP:enhancement price tolerances
MM06E001 EXIT_SAPLEINM_015 MM EDI ORDRSP: enhancement change of vendor material
SDEDI001 EXIT_SAPLVEDC_001 Customer enhancement for control record of order confirmation
SDEDI001 EXIT_SAPLVEDC_002 Customer enhancement for data records of order confirmation
SDEDI001 EXIT_SAPLVEDC_003 SD EDI ORDRSP: customer enhancement
SDEDI001 EXIT_SAPLVEDC_004 SD EDI ORDRSP:customer enhancement for reading additional data
SDEDI001 EXIT_SAPLVEDC_005 SD EDI ORDRSP: customer enhancement for configuration
SDEDI001 EXIT_SAPLVEDC_006 SD EDI ORDRSP: customer enhancement for configuration structures
SDEDI001 EXIT_SAPLVEDC_007 SD EDI ORDRSP: customer enhancement for header conditions
SDEDI001 EXIT_SAPLVEDC_008 SD EDI ORDRSP: customer enhancement for item conditions
WVFB0001 EXIT_SAPLWVFB_001 Customer exists for store order PO confirmation control seg.
WVFB0001 EXIT_SAPLWVFB_003 Customer exists for store order PO confirmation data seg.
100. PAYEXT
Extended payment order
FEDI0003 EXIT_SAPLIEDP_002 FI-EDI outgoing payments: Save PEXR segments (external payments)
FEDI0004 EXIT_SAPLIEDP_901 FI-EDI outgoing payments: New partner house bank
FEDI0004 EXIT_SAPLIEDP_902 FI-EDI outgoing payments: End of IDoc payment (VBLNR)
FEDI0004 EXIT_SAPLIEDP_903 FI-EDI outgoing payments: End of partner house bank
101. PICKSD
Picking data confirmation to customer delivery
VMDE0002 EXIT_SAPLVMDE_002 Shipping Interface: Message PICKSD (Picking, Outbound)
102. PRDCAT
Product Catalog
WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
103. PRDPOS
Product catalog item
WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
104. PRICAT
Price list / catalog
VPRE0001 EXIT_SAPLVPRE_001 PRICAT outbound processing (MAMT AUSP MAW1)
VPRE0001 EXIT_SAPLVPRE_002 PRICAT outbound processing (control record)
VPRE0001 EXIT_SAPLVPRE_003 PRICAT outbound processing (IDoc segments)
105. PROACT
Stock and sales data
WVMI0001 EXIT_SAPLWVMI_001 IDoc PROACT outbound: final action prior to sending
106. REMADV
Payment advice
FEDI0003 EXIT_SAPLIEDP_001 FI-EDI: Outgoing pmnt advice - Create extension of segments/ new segments
107. REQOTE
Inquiry
VEDE0001 EXIT_SAPLVEDE_001 Customer enhancement for control record of outbound quotation
VEDE0001 EXIT_SAPLVEDE_003 SD EDI REQOTE: customer enhancement
VEDE0001 EXIT_SAPLVEDE_002 Customer enhancement for data records of outbound quotation
VEDE0001 EXIT_SAPLVEDE_004 SD EDI REQOTE: customer enhancement for reading additional data
VEDE0001 EXIT_SAPLVEDE_005 SD EDI REQOTE: customer enhancement for configuration
VEDE0001 EXIT_SAPLVEDE_006 SD EDI REQOTE: customer enhancement for configuration structures
VEDE0001 EXIT_SAPLVEDE_007 SD EDI REQOTE: customer enhancement for header conditions
VEDE0001 EXIT_SAPLVEDE_008 SD EDI REQOTE: customer enhancement for item conditions
108. SRCLST
Source List
MMAL0001 EXIT_SAPLMEAO_001 ALE source list distribution: outbound processing
109. SRVMAS
Master data service master
BASO0001 EXIT_SAPLBASO_001 Enhancement: service master, check standard service catalog
BASO0001 EXIT_SAPLBASO_002 Userexit IDoc service master: receiver determination
110. SYPART
Partner profiles
SIDOC002 EXIT_SAPLEDI6_001 CA-EDI, Partner-IDoc: Exit after segment E1EDPP1
SIDOC002 EXIT_SAPLEDI6_002 CA-EDI, Partner-IDoc: Exit after segment E1ADRM0
SIDOC002 EXIT_SAPLEDI6_003 CA-EDI, Partner-IDoc: Final exit before sending
SIDOC002 EXIT_SAPLEDI6_004 CA-EDI, Partner-IDoc: Exit after segment E1ADRP0
SIDOC002 EXIT_SAPLEDI6_005 CA-EDI, Partner-IDoc: Exit after segment E1ADRE0
SIDOC002 EXIT_SAPLEDI6_007 CA-EDI, Partner-IDoc: Exit after segment E1EDP13
SIDOC002 EXIT_SAPLEDI6_008 CA-EDI, Partner-IDoc: Exit after segment E1EDP21
111. TPSDLS
Shipping planning system: Transfer delivery
V56I0001 EXIT_SAPLV56I_001 IDoc TPSDLS: Modification of delivery header group
V56I0002 EXIT_SAPLV56I_002 IDoc TPSDLS: Modification of delivery item group
V56I0003 EXIT_SAPLV56I_003 IDoc TPSDLS: Modification of package data group
V56I0004 EXIT_SAPLV56I_004 IDoc TPSDLS: Modification of entire IDoc
V56I0005 EXIT_SAPLV56I_005 IDoc TPSDLS: Modif. of delivery items relevant to shipment
V56I0006 EXIT_SAPLV56I_006 IDOC TPSDLS: User-defined determ. for location substitution
V56I0020 EXIT_SAPLV56I_020 IDoc control record modification in interface SD-TPS
112. WBBDLD
Assortment list: Material data
WBBE0001 EXIT_SAPLWBBI_001 Modification of replenishment list IDoc
113. WMCATO
Reversal/Reversal request for transfer order
MWMIDO02 EXIT_SAPLLIDO_002 Customer enhancement for IDoc WMCAID01
114. WMINVE
Inventory count input
MWMIDO04 EXIT_SAPLLIDO_004 Customer enhancement for IDoc WMIVID01
115. WMRREF
Release reference number
MWMIDO03 EXIT_SAPLLIDO_003 Customer enhancement for IDoc WMRRID01
116. WMTORD
Transfer order
MWMIDO01 EXIT_SAPLLIDO_001 Customer enhancement for IDoc WMTOID01
117. WP_EAN
POS interface: Upload / Download EAN assignments
WPDA0001 EXIT_SAPLWPDA_003 POS interface: Modification of IDoc data for EAN references
118. WP_PER
POS interface: Upload / Download person data
WPDA0001 EXIT_SAPLWPDA_008 POS interface: Modification of IDoc data for person related data
WPDA0001 EXIT_SAPLWPDA_013 POS interface: Add. Change pt. Analysis for WP_PER
119. WP_PLU
POS interface: Upload / Download material master
WPDA0001 EXIT_SAPLWPDA_002 POS interface: Modification of IDoc data for material master
WPDA0001 EXIT_SAPLWPDA_009 POS interface: Add. Change pt. Analysis for WP_PLU
120. WPDCUR
POS interface: Download exchange rates
WPDA0001 EXIT_SAPLWPDA_006 POS interface: Modification of IDoc data for exchange rates
121. WPDNAC
POS interface: Download products
WPDA0001 EXIT_SAPLWPDA_005 POS interface: Modification of IDoc data for follow-on items
WPDA0001 EXIT_SAPLWPDA_011 POS interface: Add. Change pt. Analysis for WPDNAC
122. WPDSET
POS interface: Download set assignments
WPDA0001 EXIT_SAPLWPDA_004 POS interface: modification of IDoc data for set assignments
123. WPDSET
POS interface: Download set assignments
WPDA0001 EXIT_SAPLWPDA_010 POS interface: Add. Change pt. Analysis for WPDSET
124. WPDTAX
POS interface: Download tax rates
WPDA0001 EXIT_SAPLWPDA_007 POS interface: modification of IDoc data for taxes
125. WPDWGR
POS interface: Download material group master
WPDA0001 EXIT_SAPLWPDA_001 POS interface: Modification of IDoc data for material groups
WPDA0001 EXIT_SAPLWPDA_012 POS interface: Add. Change pt. Analysis for WPDWGR
126. WPUBON
POS interface: Upload sales documents (compressed)
WPUE0002 EXIT_SAPLWPUE_102 IDoc WPUBON01: prior to update
127. WTADDI
Additionals
WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
128. WTADDI_CVB1
Additionals w/o 06
WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
General IDoc User Exits
ALE00001 EXIT_RBDPROSE_001 Old: exit for converting preproduction system to production
ALE00001 EXIT_SAPLBD11_001 User exit for the IDOC version changer
BDMO0001 EXIT_SAPLBDMO_001 Old: Enhancement to the ALE distribution reference model
KKCD0001 EXIT_SAPFKCIM_001 SAP-EIS: User exit for data compression of sender records (used for IDoc conversion)
KKCD0001 EXIT_SAPFKCIM_002 SAP-EIS: User exit for data summ. Of summarized records befo (used for IDoc conversion)
Link for the same:
http://erpgenie.com/abaptips/content/view/302/62/
Pls reward helpful points.
Regards,
Ameet -
ATD Check Issue in creation TLB Order Manually in Planning Book.
Hi ,
I am facing issue in ATD Check in TLB Interactive Planning while creating TLB Order Manually.
Here goes scenario.
I am creating TLB Order Manually in TLB Planning Book with below Information.
Demand Date u2013 02.01.2012 ( Todayu2019s date ) & Qty u2013 20
Considering Lead Time of 10 Days to supply from Plant to Depot, Delivery Date in Purchase Order is calculated as 12.01.2012
Now I do outbound delivery for this PO in ECC. As client is not using Routes Transit Times functionalities, Planned Goods Issue Date for Outbound Delivery in ECC is calculated as Delivery Date from PO which is 12.01.2012 minus Transit Time in Route which is maintained as 0. Hence Planned Goods Issue Date in ECC is 12.01.2012.
This is same as Requirement Date for Outbound Delivery. PGI for this delivery is yet to happen. When PGI is done then issue is resolved.
When this Delivery goes in APO, it has requirement date as 12.01.2012 and now when I create TLB Order in Interactive Planning Book manually it allows me to create TLB Order of 20 qty extra before populating below message
u201CThere is only an ATD quantity of XXX available for product GHECP02u201D
In short it allows me to create 20 extra PO as Outbound Delivery is shifted to future bucketu2019s and hence is not counted in ATD Issues.
I am using Daily Bucket Profile in TLB Planning Book.
If I use Monthly Bucket Profile my issue is solved but again when client is creating TLB Order , by default system picks first date of bucket which client does not want.
Is there any way where in I can avoid this excess PO Creation. When it checks ATD Availability it should consider these outbound deliveries which are of future dates.
Regards,
SameerHi Sameer,
Such kind of issues would come when master data/transaction data in APO and R/3 are not in sync.
You could go in for some custom development for TLB orders, but it's like opening a pandora's box as you are messing with teh standard working of system. It could create data inconsistencies between APO and R/3 and I would not really advise this. It's best to maintain all the relevant master data/transaction between APO and R/3 in sync.
Better ask your client to maintain the relevant routes as required. Otherwise they should create PO directly in R/3 as required.
Thanks - Pawan -
How to Create one TLB Order manually with multiple deployed STR's
Hello,
We are currently facing an issue when trying to make a TLB manually by right clicking on the deployed STR's.
APO generates multiple orders for each item.
Business requirement is to generate one TLB Order.
For example there are 10 Confirmed STR's and the planner wants to choose the deployed STR's manually from the list of 10 products. When we right cliick and select each product (for either partial or full ) it moves to the TLB order, but generates multiple orders.
Is there a way to restrict the requested lines to be in one Order? So that when the order is CIFed to ECC, there's only one STO generated with multiple lines.
Regards,
BhaveshHi Bhavesh,
By manual TLB process only you can create stock transfer order with SINGLE line item. because your deployed STRs always will have single line item and you are selection one by one and converting manually. in STD process you can not club items manually...
Yes it can be very much possible by automatic TLB run. it will take all the deployed orders and converting as TLB order by considering TLB profile where min , max limits maintained. also there is concept if you maintain loading group in product master based on that materials will be grouped together.....
Clubbing items into one order is done by TLB heuristics.. but when you do manually you are deciding how to do it?....
You can do one thing... after creation of TLB order with single item..you can edit and include some more items manually. Accordingly you need to delete deployed STRs.......
If you want to automate this then you need to look out for BADI... not sure possible or not
Regards
Thennarasu.M -
How to replace TLB order in APO (/sapapo/snptlb) with external number
Hi All,
I am trying to replace TLB order (ex. APO-0001) created in transaction /sapapo/snptlb with an external number generated by me
(ex. test-123). Can anyone suggest an FM or anymethod or process for the same.
Win full points by answering this simple question !!
Thanks - ChandanDear Chandan
You can make the settings in SPRO->APO->SNP->Basic setting-> Maintain Number Ranges for orders . Maintain the number ranage and Tick it as External.
When you Run TLB, You can provide the external number. -
TLB order are not picking all PO in APO
Hi Expert,
TLB order are not picking PO in APO.Order has missing PO.
for ex :
Ord 1 ; 10 lines with 20 qty of PO
Ord 2 : 5 lines with 20 qty of PO (here lines should be 10 instead of 5)
I appreciate your immediate response
Thanks
Vijay JobHi
I found the mistake. The address ( shift F5 ) in OX10 does not get transported in transport request , thought the plant gets copied from eg. client 100 to client 200.
So I manually entered the address for the target client eg 200 here, and then the dropdown list now shows all plants.
Thanks
kamala -
TLB Order changes means of transport
Hi Experts.
We are using TLB to create transport loads.
We have a pair of source location and destination location, where a product is maintained for two means of transport MODE1 & MODE2
When TLB order is created in APO it is created for MODE1 and saved in APO. When It is transferred to R/3 the order coming back from R/3, it shifts to other means of transport.
Let me know why this happens and what is the way out.
Thanks in advance.
Nitin ThatteHi Nitin,
Before we get the reason of the change in Mode od Transport, please tell me when the order goes into SAP from APO does it have the same mode of transport in SAP as was in APO. Is there any manual intervention in SAP side for changing the mode of transport ?
Thanks,
Harsh -
Is there a FM or BAPI to delete TLB order at target node
Hi All,
Is there a FM or BAPI to delete TLB order at target node ...that is used by SAP standard at the time PO is 'closed' with the Goods Receipt posting.
Thanks & Regards,
Vasu.Hi,
It is not possible to delete an external procurement order at the tareget location and retain it at the source location as the order is linked by the source destination combination, as soon as you delete the order at target location its refernce at the source also gets deleted, also its not possible to create a order with target location as blank.
what is your business requirement for this logic can u pls elaborate?
Thanks,
sanjog -
Can we find out APO TLB order no from R3 STO which transferred from APO
Hi ,
APO created STO exists in R3 with R3 No. Range (came after TLB run), is it possible to find out original APO TLB order number by mapping R3 STO number and who has created it.
Is it possible get the TLB log that TLB was executed in interactive TLB book?
Thank you.
Rajesh.kHi,
I am afraid not. You can check the logs for TLB run under APO>SNP>Reporting>application logs.
But I doubt if the interactive runs are saved in this log...
But the system for sure doesnot give the APO generated order number and the corresponding R/3 number. The only way may be to look at the creation time in OM19 (alternatively go to product view and enter GT_IO in command field that shows the live cache view) for the R/3 order.
Edited by: Visu Venkat on Nov 8, 2008 10:13 PM -
Error in scheduling parameters for production orders
Hi Guys,
Greeting for the day u2026u2026u2026.
I am trying to create production orders creation for own order type ex MM01, but I am getting error message as u201C scheduling parameters are not defined for the order type u201C even though I have maintained following parameters as below,
Production scheduler -
xxxxx,
Detailed scheduling -
check box of scheduling ticked,
Rough cut scheduling --- scheduling id u201301, scheduling and generate capa requi,, boxes ticked,
Adjust scheduling -- requi to operation date,
Scheduling control for detailed scheduling ---backwards and check box of auto scheduling ticked
Operation segment ---setup,
All operation in order will be reduce
Do not reduce,
Could any one light on this issue,
Thanks in advance,
MohanHi,
This error will come if you have not maintained Define scheduling parameters for production orders.
Check this order type whether linked with respective plant in OPU3.*And give production scheduler * mark ie, all.*
And in Define production scheduling profile - OPKP, link your order type in the page below.
In material master work scheduling view, input production sch profile or prod scheduler.
Regards,
Dharma -
Order type dependent parameters for process order
Hello friends,
In Order type dependent parameters for process order (T.C COR4), there is subscreen for Process data documentation.Inside it we have three options :a) Batch Record Required
b) Order Record Required
c) No Process Data Documentation Reqd.
Through F1 help whatever information i have got regarding them, is not cleared.
According to it, if i select Order Record Reqd, than first of all i will have to delete (archieve) the order record than only i can delete (archieve) the process order.The same is with Batch Record Required.
So according to it if i want to delete the process order than first i will have to delete order record.So guys may i know which order record firstly i have to delete?Than only the system status for process order will not have the status ORRQ (Order Record Reqd).
And one more thing friends,if i select the third option No Process Data Documentation Reqd than which process data documentation system will not create?Or what will happen if i select this third option?
Thankingy you guys in advance.HI
For process data documentaion pls check the following link:
http://help.sap.com/saphelp_47x200/helpdata/en/89/a43ea8461e11d182b50000e829fbfe/frameset.htm
Thanks -
Reg change in the status profile in the process order
Dear all,
By default one status profile ZPI0001 has been assigned to an order type ZP10 in a plant, the requirement is at the time of process order creation we want to change the status profile to ZPI0002 and create . this is applicable for one plant only
Please let me know the settings to be done for that
Thanks in advance
Regards
venkatHI Venkat,
I am not sure why do you need different status profile at the creation of process order...
First define the status profile ZPI0002 using Tcode BS01/BS02 and assign it to the order type ZP10 using CORN. The same order type is defined to plant using COR4..Here you can only have only one status profile for each order type, however, you can define different custom user status for the status profile..Say ZOCL - Order Completely closed after system status TECO to stop all goods movements...You can't have separate status profile while creating process order and at other stage of process order..Gurus please correct me if I am wrong..
Thanks
Sree... -
Which R3-Profil-Parameters are Reported ?!?
I have a Sap Solution Manager (SSM) with Enhancement Package1 which gets data for the EWA (Early Watch Alerts) once a week (on sundays) from the connected SAP Systems. The data is then saved in a set of tables named "DSWPBI_*", i.e.
DSWPBI_Server
DSWPBI_Sysdata
DSWPBI_System
For Auditing Issues i am specially interested in the R3-profil-parameters which are stored in the table DSWPBI_Server. My question regarding the values for these parameters is:
Which value will be stored (and reported later) when a profil parameter is changed dynamically (means the parameter will be activated without restarting the system). For example the dynamically changeable parameter xyz may be set to the value "1" in the instance profil but is dynamically changed to "2" during operations. Which of these values will be found (and reported) in the table DSWPBI_Server ?
Is it the value "2" because it is the momentarily active one or is it "1" because it is the value saved in the profile file (and will be active after the next reboot) ???
Thanks you for your help,
Christophwill assign points to any suggestion
-
Plan/budget profile to the Internal order.
where do we assign Plan/budget profile to the Internal order.
Thnks
jabeenHi
Please ensure whether your order type is assigned to the budgeted profile. Follow the following path:
Controlling-Internal Order-Budget and Availaibility Control-Maintain Budget Profile(T Code KOAB)
-->Maintain Budget Profile
Regards -
Dear experts,
I'm trying to configure our CRM 2007 system (upgraded from CRM 4.0) in order to call ERP Sales Order functions from the the new CRM WebClient UI. The ERP background system is ECC 5.0.
Issue Description:
In standard, we should have 2 default profiles for ERP Sales Orders: DEFAULT and SALESPRO but I can't see them. I think those entries will allow us to call some ERP Sales Order functions from CRM. When I try to recreate them manually, a short dump occurs.
Steps for reconstruction:
1. CRM > Interaction Center WebClient > Business Transaction > ERP Sales Order > Define Profiles for ERP Sales Order
2. Select SALESPRO and double-click on Assign Document Types to ERP profiles in the left menu
3. Select New Entries and select SALESPRO for the ERP Sales Order Profile
4. Select a Document Type using the F4 search. Short dump occurs and can be analysed in the ECC system (SLS_LORD_GET_VALUES_AUART)
Do you have any idea why this short dump occurs?
Thanks in advance
StephanieHi,
see ERP Sales Transaction in CRM 2007 for details.
They say that you can connect only a ECC6.0 to CRM, not any older versions.
Unfortunately I cannot check this statement.
Regards,
Claudia
Maybe you are looking for
-
Dear Guru's, When ever a material is rejected in Quality inspection,we are sending thru return to vendor and we r sending it thru manual invoice. Now my client is asking that he want system bill only..Can u pls let me know the process.. Regards, c
-
How many individual (not mirrored) external displays can the Macbook Pro support? I need at least 4 for a project that's coming up. Thanks, -Ian B.
-
Hi all, I am using DynPage for my development. I have 6 iViews in a page.1 iView will be in left side,and the other iViews are in right side(same position). based on the user click the link from left iView,I have to make visible the other iViews in r
-
Date in my application is effected if i change the Region in my system
I have one problem in my applicaiton. I am getting some dates from the server side when i launch my application. But when i changed the date in Region and Language setting in control panel, the date is getting changed. If i want to stop that what do
-
Desktop link keeps disappearing from Favorites pane
On my 10.9.4 MacBook Air, all of a sudden I have the following weird problem. The "Desktop" link is missing from the left panel of Favorites on any Finder window. I drag it there, and next window I open - it's gone again! What is going on?!?