TListen not starting...Session Manager error

Hi
when i install tuxedo 7.1 , i get an error that tuxedo/bin was not added in the
Session Manager..and then my listener does not start..
any clue in to that..
Thanks in advance
Vivek

starts up the instance and shuts down immediately.
Here is the log
/u01/app/oracle/oracle/product/10.2.0/db_1/bin/dbstart: Starting up database "sales"
Thu Dec 24 23:26:47 IST 2009
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Dec 24 23:26:47 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> ORA-00371: not enough shared pool memory, should be atleast 62198988 bytes
SQL> Disconnected
/u01/app/oracle/oracle/product/10.2.0/db_1/bin/dbstart: Database instance "sales" warm started.

Similar Messages

  • JMStudio Error  "Can not create session manager"

    Hi,
    I'm trying to transmit an mpg file through a simple pc to pc network, using the transmission wizard in the JMStudio, and everytime it causes a "can not create session manager" error, even when I try to transmit .mp3 file
    I'm using an ip like 100.100.0.1 for the sender machine, and 100.100.0.2 for the receiver machine, and I don't know where is the problem
    thanks in advance

    Um,maybe the port that you use for transmission is already occupied.
    Make sure that you are not using JMStudio to transmit streams while trying to receive streams from the same port.

  • Can not refresh server manager Error:0x8007045b

    OS: Windows 2012 R2 Core
    Services: Hyper V
    I was trying to remote reboot and the session hung. No worries I decided I could just reboot the next morning. So I rebooted the next day but when I go into server manager I get
    an errror can not refresh server manager Error:0x8007045b. Did some research found suggestions to fix it using a DISM.exe /Online /Cleanup-image /Restorehealth.
    But then I get an error 1115 A system Shutdown is in progress. I attempt to fix this issue using pskill winlogon but the issue pursistest. I have restarted the server several times now. Not sure how to fix this.
    Thanks in advance,
    Jake

    Hi,
    In addition to the above information,
    Checkout the below thread for similar discussion,
    http://social.technet.microsoft.com/forums/windowsserver/en-US/a700e9f6-4491-4c70-8bd0-d9d3111e2f70/windows-reboot-error
    Regards,
    Gopi
    JiJi
    Technologies

  • Can not start Enterprise Manager web page

    I can not start Enterprise Manager web page.
    Here is my steps:
    1. Start enterprise manager
    emctl start
    Waiting for EM to initialize ...Started
    2. Check status:
    emctl status
    EMD is up and running : 200 OK
    3. Start the web page
    http://myhost:1810/
    4. get following error
    "There was no response. The server could be down or is not responding"
    System info:
    Database: 8.1.7.2
    OAS: 9.2.0.2
    JDK: 1.3.0_02
    Server OS: SunOS 5.8
    My question is where is the log file of enterprise manager and what the problem is.
    Thanks in advance
    Don

    diego,
    Thank you for your help. when I try your command I get following error:
    emctl start iasconsole
    Unknown command option
    Usage::
    emctl start|stop|status
    emctl reload | upload
    emctl set credentials [<Target_name>[:<Target_Type>]]
    emctl gencertrequest
    emctl installcert [-ca|-cert] <certificate base64 text file>
    emctl set ssl test|on|off|password [<old password> <new password>]
    emctl set password <new pwd>
    emctl authenticate <pwd>
    emctl switch home [-silent <new_home>]
    emctl config <options>
    emctl config options can be listed by typing "emctl config"

  • Could not start NetSupport Manager Client For MacOS X because the lice

    Could not start NetSupport Manager Client For MacOS X because the licence expired
    "Could not start NetSupport Manager Client For MacOS X because the license file has expired."
    I have a suspicion the above is a result of an old version of a program from a previous version of MACOS having been migrated, even from a PPC machine (PB17 to be exact).
    My issue is how to fix it. What is the exact programme in error? What do i delete?
    I have even upgraded to Leopard and the problem migrates to that(!) So clearly I have to manually sort this out. But how?
    Many thanks
    Anthony
    reposted original 19/nov/2007 unanswered

    NetSupport Manager's web site would appear to be here (found via a quick web search):
    http://www.netsupportmanager.com/
    They should be able to tell you how to install their product, if the download doesn't contain an uninstaller (I'm not going to register with them just to find out).
    Regards

  • Could not start NetSupport Manager Client For MacOS X because the license e

    "Could not start NetSupport Manager Client For MacOS X because the license file has expired."
    I have a suspicion the above is a result of an old version of a program from a previous version of MACOS having been migrated, even from a PPC machine (PB17 to be exact).
    My issue is how to fix it. What is the exact programme in error? What do i delete?
    I have even upgraded to Leopard and the problem migrates to that(!) So clearly I have to manually sort this out. But how?
    Many thanks
    Anthony

    NetSupport Manager's web site would appear to be here (found via a quick web search):
    http://www.netsupportmanager.com/
    They should be able to tell you how to install their product, if the download doesn't contain an uninstaller (I'm not going to register with them just to find out).
    Regards

  • Session management error: Authentication Rejected error

    Please help me with this error I get when trying to build qdvdauthor:
    /opt/qt/bin/uic qplayer/engines/dialogqxinesetup.ui -o .ui/dialogqxinesetup.h
    Session management error: Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authentication failed
    the xhost + command does not help and ...
    the command: xhost +localhost gives me the following message:
    xhost:  bad hostname "localhost"
    Thank you

    br4 wrote:
    no
    in /etc/rc.conf
    # NETWORKING
    HOSTNAME="myhost"
    and /etc/hosts is 127.0.0.1
    i use dhcp . so should i change the /etc/rc.conf ?
    At least something worked!  FYI, I use dhcp as well and here are the relevant parts of my /etc/rc.conf
    # NETWORKING
    HOSTNAME="darkstar"
    and /etc/hosts
    #<ip-address> <hostname.domain.org> <hostname>
    127.0.0.1 localhost.localdomain localhost darkstar

  • Remote Desktop Management service not starting. service-specific error: %%2284126209 - Event ID: 7024

    Hi Forum members,
    We have a client that has intermittent issues with RDS on a 2012 R2 server.
    As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
    DNS roles amongst others.
    The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
    The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
    Log Name:      System
    Source:        Service Control Manager
    Date:          21/01/2015 4:50:32 PM
    Event ID:      7024
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      intentionally removed.local
    Description:
    The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
    Event Xml:
    <Event xmlns="
      <System>
        <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
        <EventID Qualifiers="49152">7024</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8080000000000000</Keywords>
        <TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
        <EventRecordID>53721</EventRecordID>
        <Correlation />
        <Execution ProcessID="568" ThreadID="12436" />
        <Channel>System</Channel>
        <Computer> intentionally removed.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="param1">Remote Desktop Management</Data>
        <Data Name="param2">%%2284126209</Data>
        <Binary>520044004D0053000000</Binary>
      </EventData>
    </Event>
    In addition in the "Application" event log, the following error is logged:
    Log Name:      Application
    Source:        MSSQL$MICROSOFT##WID
    Date:          21/01/2015 5:24:47 PM
    Event ID:      18456
    Task Category: Logon
    Level:         Information
    Keywords:      Classic,Audit Failure
    User:          NETWORK SERVICE
    Computer:      intentionally removed.local
    Description:
    Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
    Event Xml:
    <Event xmlns="
      <System>
        <Provider Name="MSSQL$MICROSOFT##WID" />
        <EventID Qualifiers="49152">18456</EventID>
        <Level>0</Level>
        <Task>4</Task>
        <Keywords>0x90000000000000</Keywords>
        <TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
        <EventRecordID>4228336</EventRecordID>
        <Channel>Application</Channel>
        <Computer>intentionally removed.local</Computer>
        <Security UserID="S-1-5-20" />
      </System>
      <EventData>
        <Data>NT AUTHORITY\NETWORK SERVICE</Data>
        <Data> Reason: Could not find a login matching the name provided.</Data>
        <Data> [CLIENT: &lt;named pipe&gt;]</Data>
        <Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
      </EventData>
    </Event>
    I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
    to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
    My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
    Regards,
    David West.

    Hi David,
    If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
    More information for you:
    Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
    http://support.microsoft.com/kb/2799605/de
    Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
    http://support.microsoft.com/kb/2833839
    If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Oracle not starting up throwing error

    My listener problem is solved but the DB dosent start up and throws this error, I also have a dump of the startup.log and the copy of init.ora file.
    [oracle@localhost ~]$ ./oracle.sh start
    Starting Oracle: Password:
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 24-DEC-2009 23:01:32
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    TNS-01106: Listener using listener name LISTENER has already been started
    Password:
    Failed to auto-start Oracle Net Listene using /ade/vikrkuma_new/oracle/bin/tnslsnr
    Processing Database instance "sales": log file /u01/app/oracle/oracle/product/10.2.0/db_1/startup.log
    OK
    startup.log
    /u01/app/oracle/oracle/product/10.2.0/db_1/bin/dbstart: Starting up database "sales"
    Thu Dec 24 23:02:00 IST 2009
    logger: Can't find init file for Database instance "sales".
    logger: Error: Database instance "sales" NOT started.
    init.ora
    # $Header: init.ora 06-aug-98.10:24:40 atsukerm Exp $
    # Copyright (c) 1991, 1997, 1998 by Oracle Corporation
    # NAME
    # init.ora
    # FUNCTION
    # NOTES
    # MODIFIED
    # atsukerm 08/06/98 - fix for 8.1.
    # hpiao 06/05/97 - fix for 803
    # glavash 05/12/97 - add oracle_trace_enable comment
    # hpiao 04/22/97 - remove ifile=, events=, etc.
    # alingelb 09/19/94 - remove vms-specific stuff
    # dpawson 07/07/93 - add more comments regarded archive start
    # maporter 10/29/92 - Add vms_sga_use_gblpagfile=TRUE
    # jloaiza 03/07/92 - change ALPHA to BETA
    # danderso 02/26/92 - change db_block_cache_protect to dbblock_cache_p
    # ghallmar 02/03/92 - db_directory -> db_domain
    # maporter 01/12/92 - merge changes from branch 1.8.308.1
    # maporter 12/21/91 - bug 76493: Add control_files parameter
    # wbridge 12/03/91 - use of %c in archive format is discouraged
    # ghallmar 12/02/91 - add global_names=true, db_directory=us.acme.com
    # thayes 11/27/91 - Change default for cache_clone
    # jloaiza 08/13/91 - merge changes from branch 1.7.100.1
    # jloaiza 07/31/91 - add debug stuff
    # rlim 04/29/91 - removal of char_is_varchar2
    # Bridge 03/12/91 - log_allocation no longer exists
    # Wijaya 02/05/91 - remove obsolete parameters
    # Example INIT.ORA file
    # This file is provided by Oracle Corporation to help you customize
    # your RDBMS installation for your site. Important system parameters
    # are discussed, and example settings given.
    # Some parameter settings are generic to any size installation.
    # For parameters that require different values in different size
    # installations, three scenarios have been provided: SMALL, MEDIUM
    # and LARGE. Any parameter that needs to be tuned according to
    # installation size will have three settings, each one commented
    # according to installation size.
    # Use the following table to approximate the SGA size needed for the
    # three scenarious provided in this file:
    # -------Installation/Database Size------
    # SMALL MEDIUM LARGE
    # Block 2K 4500K 6800K 17000K
    # Size 4K 5500K 8800K 21000K
    # To set up a database that multiple instances will be using, place
    # all instance-specific parameters in one file, and then have all
    # of these files point to a master file using the IFILE command.
    # This way, when you change a public
    # parameter, it will automatically change on all instances. This is
    # necessary, since all instances must run with the same value for many
    # parameters. For example, if you choose to use private rollback segments,
    # these must be specified in different files, but since all gc_*
    # parameters must be the same on all instances, they should be in one file.
    # INSTRUCTIONS: Edit this file and the other INIT files it calls for
    # your site, either by using the values provided here or by providing
    # your own. Then place an IFILE= line into each instance-specific
    # INIT file that points at this file.
    # NOTE: Parameter values suggested in this file are based on conservative
    # estimates for computer memory availability. You should adjust values upward
    # for modern machines.
    # You may also consider using Database Configuration Assistant tool (DBCA)
    # to create INIT file and to size your initial set of tablespaces based
    # on the user input.
    # replace DEFAULT with your database name
    db_name=sales
    db_files = 80 # SMALL
    # db_files = 400 # MEDIUM
    # db_files = 1500 # LARGE
    db_file_multiblock_read_count = 8 # SMALL
    # db_file_multiblock_read_count = 16 # MEDIUM
    # db_file_multiblock_read_count = 32 # LARGE
    db_block_buffers = 100 # SMALL
    # db_block_buffers = 550 # MEDIUM
    # db_block_buffers = 3200 # LARGE
    shared_pool_size = 3500000 # SMALL
    # shared_pool_size = 5000000 # MEDIUM
    # shared_pool_size = 9000000 # LARGE
    log_checkpoint_interval = 10000
    processes = 50 # SMALL
    # processes = 100 # MEDIUM
    # processes = 200 # LARGE
    parallel_max_servers = 5 # SMALL
    # parallel_max_servers = 4 x (number of CPUs) # MEDIUM
    # parallel_max_servers = 4 x (number of CPUs) # LARGE
    log_buffer = 32768 # SMALL
    # log_buffer = 32768 # MEDIUM
    # log_buffer = 163840 # LARGE
    # audit_trail = true # if you want auditing
    # timed_statistics = true # if you want timed statistics
    max_dump_file_size = 10240 # limit trace file size to 5 Meg each
    # Uncommenting the line below will cause automatic archiving if archiving has
    # been enabled using ALTER DATABASE ARCHIVELOG.
    # log_archive_start = true
    # log_archive_dest = disk$rdbms:[oracle.archive]
    # log_archive_format = "T%TS%S.ARC"
    # If using private rollback segments, place lines of the following
    # form in each of your instance-specific init.ora files:
    # rollback_segments = (name1, name2)
    # If using public rollback segments, define how many
    # rollback segments each instance will pick up, using the formula
    # # of rollback segments = transactions / transactions_per_rollback_segment
    # In this example each instance will grab 40/5 = 8:
    # transactions = 40
    # transactions_per_rollback_segment = 5
    # Global Naming -- enforce that a dblink has same name as the db it connects to
    global_names = TRUE
    # Edit and uncomment the following line to provide the suffix that will be
    # appended to the db_name parameter (separated with a dot) and stored as the
    # global database name when a database is created. If your site uses
    # Internet Domain names for e-mail, then the part of your e-mail address after
    # the '@' is a good candidate for this parameter value.
    # db_domain = us.acme.com      # global database name is db_name.db_domain
    # FOR DEVELOPMENT ONLY, ALWAYS TRY TO USE SYSTEM BACKING STORE
    # vms_sga_use_gblpagfil = TRUE
    # FOR BETA RELEASE ONLY. Enable debugging modes. Note that these can
    # adversely affect performance. On some non-VMS ports the db_block_cache_*
    # debugging modes have a severe effect on performance.
    #_db_block_cache_protect = true # memory protect buffers
    #event = "10210 trace name context forever, level 2" # data block checking
    #event = "10211 trace name context forever, level 2" # index block checking
    #event = "10235 trace name context forever, level 1" # memory heap checking
    #event = "10049 trace name context forever, level 2" # memory protect cursors
    # define parallel server (multi-instance) parameters
    #ifile = ora_system:initps.ora
    # define two control files by default
    control_files = (ora_control1, ora_control2)
    # Uncomment the following line if you wish to enable the Oracle Trace product
    # to trace server activity. This enables scheduling of server collections
    # from the Oracle Enterprise Manager Console.
    # Also, if the oracle_trace_collection_name parameter is non-null,
    # every session will write to the named collection, as well as enabling you
    # to schedule future collections from the console.
    # oracle_trace_enable = TRUE
    # Uncomment the following line, if you want to use some of the new 8.1
    # features. Please remember that using them may require some downgrade
    # actions if you later decide to move back to 8.0.
    #compatible = 8.1.0

    starts up the instance and shuts down immediately.
    Here is the log
    /u01/app/oracle/oracle/product/10.2.0/db_1/bin/dbstart: Starting up database "sales"
    Thu Dec 24 23:26:47 IST 2009
    SQL*Plus: Release 10.2.0.1.0 - Production on Thu Dec 24 23:26:47 2009
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> Connected to an idle instance.
    SQL> ORA-00371: not enough shared pool memory, should be atleast 62198988 bytes
    SQL> Disconnected
    /u01/app/oracle/oracle/product/10.2.0/db_1/bin/dbstart: Database instance "sales" warm started.

  • Firefox will not start after upgrade: error code 2324

    I upgraded Firefox on my workstation running Windows 7 Enterprise (64-bit). The stub installer downloads and runs through the installation, but does not start Firefox automatically. If I click on the link in the taskbar, nothing happens. Same with the one pinned to the start menu. If I go to the Mozilla folder and load Firefox from there, I get a message saying "The installer encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324."

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
    Please report back to see if this helped you!
    Thank you.

  • CSSD does not start (Cluster Manager)

    Hi, All,
    I had installed Oracle 10.2.0 and I'm gone use ASM. But when I'm starting de CSSD nothing happens. No process are submited.
    The description :
    # ./localconfig reset $ORACLE_HOME
    Successfully accumulated necessary OCR keys.
    Creating OCR keys for user 'root', privgrp 'root'..
    Operation successful.
    Configuration for local CSS has been initialized
    Adding to inittab
    Startup will be queued to init within 90 seconds.
    Checking the status of new Oracle init process...
    Expecting the CRS daemons to be up within 600 seconds.
    Giving up: Oracle CSS stack appears NOT to be running.
    Oracle CSS service would not start as installed
    Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started
    Can someone help me?
    **The host name are not in capital letter

    HI thanks for the reply,
    Following is the log generated:
    /u01/app/oracle/product/10.2.0/db_1/log/ldi/cssd>more ocssd.log
    Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
    [    CSSD]2007-06-18 15:09:10.371 >USER: Oracle Database 10g CSS Release 10.2.0.1.0 Production Copyright 1996, 2004 Oracle.
    All rights reserved.
    [  clsdmt]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=ldiDBG_CSSD))
    [    CSSD]2007-06-18 15:09:10.371 >USER: CSS daemon log for node ldi, number 0, in cluster localhost
    [    CSSD]2007-06-18 15:09:10.418 [1] >TRACE: clssscmain: local-only set to true
    [    CSSD]2007-06-18 15:09:10.438 [1] >TRACE: clssnmReadNodeInfo: added node 0 (ldi) to cluster
    [    CSSD]2007-06-18 15:09:10.500 [5] >TRACE: clssnm_skgxnmon: skgxn init failed, rc 1
    [    CSSD]2007-06-18 15:09:10.501 [1] >TRACE: clssnm_skgxnonline: Using vacuous skgxn monitor
    [    CSSD]2007-06-18 15:09:10.502 [1] >TRACE: clssnmInitNMInfo: misscount set to 30
    [    CSSD]2007-06-18 15:09:10.508 [1] >TRACE: clssnmFatalInit: recognized localonly mode
    [    CSSD]2007-06-18 15:09:10.523 [6] >TRACE: clssnmconnect: connecting to node 0, flags 0x0001, connector 1
    [    CSSD]2007-06-18 15:09:10.557 [7] >TRACE: clsclisten: Permission denied for (ADDRESS=(PROTOCOL=ipc)(KEY=Oracle_CSS_LclLs
    tnr_localhost_0))
    [    CSSD]2007-06-18 15:09:10.558 [7] >ERROR: clssgmclientlsnr: listening failed for (ADDRESS=(PROTOCOL=ipc)(KEY=Oracle_CSS_
    LclLstnr_localhost_0)) (3)
    [    CSSD]2007-06-18 15:09:10.558 [7] >TRACE: clssgmclientlsnr: listening on (ADDRESS=(PROTOCOL=ipc)(KEY=Oracle_CSS_LclLstnr
    localhost0))
    [    CSSD]2007-06-18 15:09:10.558 [7] >TRACE: clssgmclientlsnr: listening on (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_ldi_localh
    ost))
    [    CSSD]2007-06-18 17:03:00.680 >USER: Oracle Database 10g CSS Release 10.2.0.1.0 Production Copyright 1996, 2004 Oracle.
    All rights reserved.
    [    CSSD]2007-06-18 17:03:00.680 >USER: CSS daemon log for node ldi, number 0, in cluster localhost
    [    CSSD]2007-06-18 17:03:00.691 [1] >TRACE: clssscmain: local-only set to true
    [  clsdmt]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=ldiDBG_CSSD))
    [    CSSD]2007-06-18 17:03:00.701 [1] >TRACE: clssnmReadNodeInfo: added node 0 (ldi) to cluster
    [    CSSD]2007-06-18 17:03:00.728 [5] >TRACE: clssnm_skgxnmon: skgxn init failed, rc 1
    [    CSSD]2007-06-18 17:03:00.728 [1] >TRACE: clssnm_skgxnonline: Using vacuous skgxn monitor
    [    CSSD]2007-06-18 17:03:00.729 [1] >TRACE: clssnmInitNMInfo: misscount set to 30
    [    CSSD]2007-06-18 17:03:00.729 [1] >TRACE: clssnmFatalInit: recognized localonly mode
    [    CSSD]2007-06-18 17:03:00.731 [6] >TRACE: clssnmconnect: connecting to node 0, flags 0x0001, connector 1
    [    CSSD]2007-06-18 17:03:00.774 [7] >TRACE: clsclisten: Permission denied for (ADDRESS=(PROTOCOL=ipc)(KEY=Oracle_CSS_LclLs
    tnr_localhost_0))
    [    CSSD]2007-06-18 17:03:00.774 [7] >ERROR: clssgmclientlsnr: listening failed for (ADDRESS=(PROTOCOL=ipc)(KEY=Oracle_CSS_
    LclLstnr_localhost_0)) (3)
    [    CSSD]2007-06-18 17:03:00.775 [7] >TRACE: clssgmclientlsnr: listening on (ADDRESS=(PROTOCOL=ipc)(KEY=Oracle_CSS_LclLstnr
    localhost0))
    [    CSSD]2007-06-18 17:03:00.775 [7] >TRACE: clssgmclientlsnr: listening on (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_ldi_localh
    ost))
    Do we need to configure listener or any thing else also???

  • Could Not start Enterprise Management Server Service

    Hi,
    I have installed Oracle 8i Personal Edition 8.1.6.00 on a Win2000
    machine at home.
    I can connect to the database that i have created (oracleDB)
    When i try and run Enterprise Manager and connect to the
    database, i get
    the error
    "ORA- 12541: TNS: no listener"
    Im guessing this is because i do not have the
    'OracleOraHome81ManagementServer' service running (???)
    When i try and start it from the Services MMC, i recieve the
    error
    "Could not start the OracleOraHome81ManagementServer servic on
    Local
    Computer
    Error 997: Overlapped I/O operation in progress"
    Can anyone help me out with this?
    All other Oracle related services run fine.
    I have admin privelages for the PC.
    Have PATH for oracle set up correctly i think.
    Any help would be much appreciated
    Thanks
    Martin

    Try creating a repository via the Configuration Assistant first
    Martin, and then start the OMS service. It worked for me.

  • ITunes will not start:  Get same error message ever time...

    I installed iTunes 6 and quicktime and now it will not start up at all. Tried uninstalling and reinstalling as many have. The only difference is I am actually getting an error message. I do not get an hour glass as many have. I have tried deleting the suggested file found at: C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\SC Info
    This did not work either. I keep getting the following error window, and never see iTunes even try to launch: PLEASE HELP!!!!
    "iTunes has encountered a problem and needs to close. We are sorry for the inconvienence. If you were in the middle of something, the information you were working on may be lost. For more information about this error click here"

    hi Josh!
    "iTunes has encountered a problem and needs to close. We are sorry for the inconvienence.
    the first thing i check for with one of those is a broken quicktime. does your quicktime currently launch? if it doesn't, try these techniques:
    b noir, "iTunes doesn't start... Quicktime not installed ERROR 2093" #5, 03:28pm Nov 8, 2005 CDT
    keep us posted.
    love, b

  • Database do not start due to error 445

    Hi,
    We have three databases on one HP-UX 11.31 server, the DB version is 10.2.0.4, we started facing slowness in all the databases, when I tried to connect to the server it was very slow, even the sqlplus was taking very long time, when checked the alert logs of all the databases, found the below error in each alert log file;
    ksvcreate: Process(m000) creation failed
    Sun Apr 10 12:56:56 2011
    ksvcreate: Process(m000) creation failed
    Sun Apr 10 12:59:00 2011The server resource utilization was fine with almost 15%CPU utilization, 55% Memory utilization.
    I aborted the databases then tried to start them, the startup failed with the below error for all databases;
    ORA-00445: background process "PMON" did not start after 120 seconds
    The following is the alert log content for one database;
    ksvcreate: Process(m000) creation failed
    Sun Apr 10 13:09:17 2011
    ksvcreate: Process(m000) creation failed
    Sun Apr 10 13:24:29 2011
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    WARNING: Could not create SMR
    Picked latch-free SCN scheme 3
    Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
    Autotune of undo retention is turned on.
    IMODE=BR
    ILAT =242
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    Sun Apr 10 13:27:10 2011
    ksdpec: called for event 13740 prior to event group initialization
    Starting up ORACLE RDBMS Version: 10.2.0.4.0.
    System parameters with non-default values:
      processes                = 2000
      sga_max_size             = 3221225472
      __shared_pool_size       = 1828716544
      __large_pool_size        = 16777216
      __java_pool_size         = 16777216
      __streams_pool_size      = 16777216
      nls_date_format          = dd-mm-yyyy
      nls_calendar             = Arabic Hijrah
      filesystemio_options     = NONE
      disk_asynch_io           = FALSE
      sga_target               = 3221225472
      control_files            = /oradb/oradata/centl/control01.ctl, /oradb/oradat
    a/cent/control02.ctl, /oradb/oradata/cent/control03.ctl
      db_block_size            = 8192
      __db_cache_size          = 1325400064
      db_writer_processes      = 4
      compatible               = 10.2.0.3.0
      db_file_multiblock_read_count= 16
      db_recovery_file_dest    = /arch
      db_recovery_file_dest_size= 32212254720
      undo_management          = AUTO
      undo_tablespace          = UNDOTBS1
      remote_login_passwordfile= EXCLUSIVE
      db_domain                =
      dispatchers              = (PROTOCOL=TCP) (SERVICE=centlXDB)
      smtp_out_server          = 10.241.16.118:25
      job_queue_processes      = 10
      background_dump_dest     = /u01/app/oracle/admin/cent/bdump
      user_dump_dest           = /u01/app/oracle/admin/centl/udump
      max_dump_file_size       = 1024
      core_dump_dest           = /u01/app/oracle/admin/cent/cdump
      audit_file_dest          = /u01/app/oracle/admin/cent/adump
      db_name                  = cent
      open_cursors             = 2000
      pga_aggregate_target     = 1699741696
    Sun Apr 10 13:31:50 2011
    USER: terminating instance due to error 445
    Instance terminated by USER, pid = 2089Content for the Trace file for one of the databases;
    ORACLE_HOME = /u01/app/oracle/db
    System name:    HP-UX
    Node name:      db01
    Release:        B.11.31
    Version:        U
    Machine:        ia64
    Instance name: cent
    Redo thread mounted by this instance: 0 <none>
    Oracle process number: 0
    Unix process pid: 4667, image: oracle@db01
    *** 2011-04-10 15:44:19.475
    Dynamic strand is set to TRUE
    Running with 2 shared and 242 private strand(s). Zero-copy redo is FALSE
    *** 2011-04-10 15:50:40.280
    Waited for process PMON to initialize for 60 seconds
    *** 2011-04-10 15:50:40.280
    Dumping diagnostic information for PMON:
    OS pid = 4701
    loadavg : 1.36 1.35 1.29
    Swapinfo :
            Avail = 15520.08Mb Used = 2490.52Mb
            Swap free = 13029.57Mb Kernel rsvd = 1018.08Mb
            Free Mem  = 10161.05Mb
      F S      UID   PID  PPID  C PRI NI             ADDR   SZ            WCHAN    S
    TIME TTY       TIME COMD
    1401 S   oracle  4701     1  0 154 20 e000000413447080 53772 e00000017cefa140 15
    :49:39 ?         0:00 ora_pmon_cent
    /bin/sh[2]: /opt/langtools/bin/gdb:  not found.
    *** 2011-04-10 15:50:40.372
    *** 2011-04-10 15:50:50.470
    Waited for process PMON to initialize for 111 seconds
    *** 2011-04-10 15:51:31.180
    Dumping diagnostic information for PMON:
    OS pid = 4701
    loadavg : 1.36 1.35 1.30
    Swapinfo :
            Avail = 15520.08Mb Used = 2490.52Mb
            Swap free = 13029.57Mb Kernel rsvd = 1018.08Mb
            Free Mem  = 10160.98Mb
      F S      UID   PID  PPID  C PRI NI             ADDR   SZ            WCHAN    S
    TIME TTY       TIME COMD
    1401 S   oracle  4701     1  0 154 20 e000000413447080 53772 e00000017cefa140 15
    :49:39 ?         0:00 ora_pmon_cent
    /bin/sh[2]: /opt/langtools/bin/gdb:  not found.
    *** 2011-04-10 15:51:31.250
    Killing process (ospid 4701):  (reason=x4 error=0)
    ... and the process is still alive after kill!
    *** 2011-04-10 15:51:40.190
    KSTDUMP: In-memory trace dump
    TIME(usecs):SEQ# ORAPID   SID EVENT  OP DATA
    ========================================================================
    kground PMON
    2C463A42:000000F8  1999     0 10254  42 KSBS1P: timed out while waiting
    2C463A48:000000F9  1999     0 10254  51 KSBS1P: out of loop: process did not sta
    rt
    KSTDUMP: End of in-memory trace dump
    *** 2011-04-10 15:51:40.190All the databases has similar trace files, I rebooted the server and still none of the database is starting.
    The Server resources utilization seems to be fine;
    oracle$ iostat 3 3
      device    bps    sps   msps
       disk3     93    6.9    1.0
       disk5     17    2.4    1.0
      disk17      0    0.1    1.0
       disk3     21    4.3    1.0
       disk5     20    4.0    1.0
      disk17      0    0.3    1.0
       disk3      0    0.0    1.0
       disk5      0    0.0    1.0
      disk17      0    0.0    1.0
    oracle$ swapinfo -tan
                 Kb      Kb      Kb   PCT  START/      Kb
    TYPE      AVAIL    USED    FREE  USED   LIMIT RESERVE  PRI  NAME
    dev     24576000       0 24576000    0%       0       -    1  /dev/vg00/lvol2
    reserve       -  918204 -918204
    memory  15892564 2550292 13342272   16%
    total   40468564 3468496 37000068    9%       -       0    -
    System: hrdbdr01                                      Sun Apr 10 16:25:28 2011
    Load averages: 1.61, 1.60, 1.55
    237 processes: 182 sleeping, 55 running
    Cpu states:
    CPU   LOAD   USER   NICE    SYS   IDLE  BLOCK  SWAIT   INTR   SSYS
    0    1.61  27.7%   0.0%  71.3%   1.0%   0.0%   0.0%   0.0%   0.0%
    1    1.59  32.0%   0.0%  67.0%   1.0%   0.0%   0.0%   0.0%   0.0%
    2    1.61  13.0%  14.0%  71.0%   2.0%   0.0%   0.0%   0.0%   0.0%
    3    1.60  10.0%  20.0%  69.0%   1.0%   0.0%   0.0%   0.0%   0.0%
    avg   1.61  20.8%   8.9%  69.3%   1.0%   0.0%   0.0%   0.0%   0.0%
    System Page Size: 4Kbytes
    Memory: 974032K (512772K) real, 1317016K (704304K) virtual, 12491712K free  Page
    # 1/24
    CPU TTY  PID USERNAME PRI NI   SIZE    RES STATE    TIME %WCPU  %CPU COMMAND
    3   ?  4249 root     255 39 20140K  1612K run     42:41 49.96 49.88 stm
    2   ?  3360 root     255 39 20140K  1612K run     55:11 49.65 49.56 stm
    0   ?  3040 root     240 20 20140K  1612K run     72:27 49.08 48.99 stm
    1   ?  2419 root     241 20 20140K  1616K run     77:20 48.81 48.73 stm
    1   ?  4850 root     168 20 20140K  1612K sleep    4:15 23.99 23.95 stm
    2   ?  4583 root     168 20 20140K  1612K sleep   12:21 22.93 22.89 stm

    Thanks for a quick reply!
    No changes on the server side, but recently we changed the Windows DNS servers and this unix machine is connected to the domain.
    the resolv.conf file contents are
    oracle:/etc$ more resolv.conf
    domain mc.ed
    nameserver 10.141.11.1
    nameserver 10.141.11.2But, we have two new DNS servers with 10.141.11.3 and 10.141.11.4.
    I think changing the old DNS IPs with the new DNS IPs will resolve the issue.

  • Itunes will not start. No error

    my itunes starts up once you install it. but after you close and restart computer it dose not start up. there are no errors poping up.

    Hey, ppl all you have to do is download the new quick time player.
    just go here and download it
    http://www.download.com/QuickTime/3000-2139_4-10647576.html

Maybe you are looking for

  • How to get details of Pending Approval request in OIM 11g R2?

    Hi, We need to find out following details from Pending Approval Request in OIM 11g R2 - Request ID,Assignees,Requested Resource Name, Title of Request, Beneficiary, Status of Request. Out of above attributes we could find out Assignees, Title of Requ

  • How to set the user's Default joboptions directory?

    Hello Experts, When we installed Acrobat Pro 8.x on our Win XP Pro systems our systems were NOT in a Windows Domain.  At that time the default location for user-created/customized joboptions files was: C:\Documents and Settings\<Username>\Application

  • How can one resize a cell editor when in use in a JTree?

    It is possible to resize, for example, a JTextArea cell editor while it is being used in a JTable by having a document listener check the preferred height and then changing the rowHeight of the table to fit that. This gives the nice effect of the tab

  • Adobe CS6 Perpetual License - Where can I get this?

    I have been a user of Adobe since CS1.5, I purchased CS5.5 in 2011, and have been using it happily since, recently i have been having problems with CS5.5 and my update to Mavericks OS, so I thought I should buy CS6, problem is at $49.00 per month the

  • Query Network interface with C#

    Hello, I'm developing a C# winforms application under Windows server 2008 (64bit) Is there a way to query all network interfaces installed in the PC and check their IP address and if there is an ethernet connection (connected \ not connected) ? I wan