TLN changes not reflecting

Hi All,
I have a requirement of customizing the TLN. I am modifying the CSS file from the toplevelnavigation.par in NWDS and then created an iView . But the changes done in CSS are not reflecting in portal's TLN.
What can be done to see the changes ?
Thanks,
Nishant Singh

hi,
are you gettting any error at time of execution or your modifications didn.t effecting the TLN?
did you check with the iview's preview.is it working fine? upload yor modifiedpar file with different name or (make a copy of you origina par file) cretae an ivew with modified par and check whether you are getting desired output and then you assign it to framework page.there may be a error in the CSS or mogified jsp file coding
Regards
Mahesh

Similar Messages

SAP Portal changes not reflect in all the servers without reboot?

Dear SDN Members
We have one sap ep 7.0 eh1 main instance and 4 other portal instances.every time we tranport any portal develpment work such as epa packages, we need to restart all the instances to reflect the new changes.can you please suggest me
a solution if exists to avoid bouncing of all instances when a portal development work is transported.
Why does the changes not reflect in all the servers without the reboot??
Thanks
Chandra

Thanks for the quick response kenny, i wonder if we can configure any parameters in UME
to avoid bouncing of all the instances. please let me know if you have any other suggestions.
actually we have a central portal instance and 4 other portal servers connected through a
load balancer.Any tranport we move to central instance should refelect the changes in all
other portal instances.But we need to restart all the instances to see the new changes.
We are trying to find a solution if availbel which prevents server-restarts after each transport.
Thanks
Sekhar

PO changes not reflecting in the SAP R/3 system in Extended classsic

Hi Guys,
I have a querry regards to deletion of a PO line item in Extended classic scenario Version 5.0. User has deleted the line item in the shopping cart and now the status of the shopping cart is with Zero value and line item deleted, but in the PO there is a line item with some Value and we are trying to delete it and save it, it gets deleted and PO status it shows as awaiting approval. but at the Item level of the PO the check box of Item deletion is updated. which means PO line item is deleted.
Now my querry is the status of the PO in the SRM shows a awaiting approval and this is not in approval tab but at the header level when I try to search the PO with PO display/change option. Also its not reflecting with the deleted item in R/3 system.
Please help me.
Regards
Srujank

Hi
Check configuration of your Message server. check if your message server is configured properly. Just go to your SAP logon. Select the system say "DEV" and click on groups.Then Click on System id and enter the id as "ID1" in your case.
and then enter the machine name in the message server box and then click on generate list. If your message server is configured correctly you would get some groups in the list below. only if that comes then go to SLD and check in the ABap technical system if you have configured technical system using the proper logon groups.
Then you should not face this problem. Let me know if you require more information.
regards
ravi

Adobe Camera Raw changes not reflecting in Premiere Pro

I was super excited to try out the new CNDG support in Premiere Pro CC 2014, but I have to be honest - I am a bit disappointed...
I am using 16bit Cinema DNG files and the source settings sliders really aren't doing it for me (notice the pink highlights)
That's alright though, I would much rather use Adobe Camera Raw!
Right click > Edit Original
There we go, that looks nice - no pink highlights, nicely recovered details in the shadows and highlights.
PERFECT, click DONE!
Nothing...For whatever reason, changes are not reflecting.
Adobe - please allow us to use Adobe Camera Raw, there are so many folks out there that want to incorporate it into their workflow. I have tried SpeedGrade and various other color correcting tools and I have found Adobe Camera Raw to work the best IMHO
Thank you for your time.
-Loyal Paying Customer

Hi Ekombokom,
ekombokom wrote:
Hello! I too am having this same problem. I used Camera Raw (both in Bridge and Photoshop to make sure) to adjust and correct the Cinema DNG files I shot with my BMPCC; however, the video sequence in Premiere does not reflect any of the changes made. Why would Adobe not support Camera Raw settings in Premiere?
Sorry, but Premiere Pro does not have a camera raw importer. You adjust the settings in the Source Settings dialog box instead (for RED, ARRI Raw, BMCC and BM Pocket Camera DNG files). You do have access to some controls for these formats, but in some cases, Camera Raw has more controls.
ekombokom wrote:
Camera Raw is an amazing tool for refining an image and gives me the best results compared to SG and Davinci. I was so excited to be able to use it once Premiere supported CinemaDNGs but now I'm confused as to why it's not supported.
Cinema DNG from the Blackmagic Cameras are supported, you just adjust settings in Source Settings, as I mentioned. Have you tried that? The reasoning behind this is that Cinema DNG video coming from camera raw is too difficult to playback and edit with.
That said, some users bring Cinema DNG footage to After Effects, adjust the video there, then render out files that are suitable to edit with.
ekombokom wrote:
I thought the point of using Adobe was that all their products worked together seamlessly? I really hope they fix this.
You can always make a request here: http://adobe.ly/feature_request, however, I don't see a camera raw importer going into Premiere Pro any time soon (if ever) because of the reasons I previously mentioned (editing with camera raw would be too cumbersome). I think the more realistic feature request would be to add more controls in Source Settings.
Thanks,
Kevin

Custom report stored procedure changes not reflecting

Hi,
I have a custom report which works fine but now I want to do some changes in stored procedure. The stored procedure compiles successfully but the changes are not reflected in the report. Am I missing out something as I am assuming that once the stored procedure is saved, the changes must reflect immediately.
Regards,
Rahul Sharma

I did some changes in the where clause to include few more input parameters and thats it. I have not changed anything else. Moreover, even if I try to introduce an error intentionally, OIM is not picking it up. Is there any other reference which I need to change?

Transported to A and Q box - Changes not reflected in only A Box Q Box Ok?

Hi Experts,
I am facing an issue with Transportation in SAP BI.
In my project we have a requirement to create a new query After that we have developed that query with new requirement features.
As per the user requirement, the new developed query must be moved to production and where as the old version could not be displayed any more.
For that purpose, after developing the query in Dev Box i have collected the tp and deleted the old version query in DEV Box.
I have transported the new version developed query to Acceptance Box and then to Quality Box.
And tested in Acceptace and Quality Box whether new developed query features is reflecting or not .
Found that, in Quality Box new query featured reflected where as in Acceptance Box the new query reflections have not reflected.
Now my question is if i trasport the same tp to production whether changes will get reflect or not
And also would like to know the route cause why in the acceptace changes have not get reflected.
I am confirming that, in both acceptace and quality box the tp were trasported succefully with out any of the errors.
Kindly reply me any of the folks faced this kind of issue or scenario in your projects or expeiriance.
Thanks,
SN.

Hi,
Just try re-importing your query in OVERWRITE mode from D to A. Also request your basis team while transporting your TR to Prod to transport it in OVERWRITE mode.
Hope this helps.
Regards
Jeeth

Develop Module changes not reflected on screen

I have used LR for about 3 years and have never had an issue with it. I am using LR 5.7 64 bit. I have a Win7 Pro machine with 8 Gb of RAM and 2 TB drive that is 50% free. I do not have PS and I am not a Creative Cloud customer. Yesterday I started having trouble in the develop module. None of my changes are being reflected on the screen.
It almost seems that the window never changes from the image preview to the live image. When I try to zoom the image gets very pixelated (goes back to my theory I am still looking at the preview). I can zoom in library mode and the image zooms correctly.
If I leave develop module and go back to library the changes are reflected. I have 2 catalogs, both are effected. I tried creating a new catalog and the problem still exists. When I try to use the crop tool the screen goes completely white (or black depending on background color).
I have tried all of the steps in the basic troubleshooting. I have tried uninstalling and re-installing.
Has any one seen this behavior? Any ideas how to correct?

I have solved this problem by uninstalling the DirectX drivers and re-installing them.

Changes not reflected in iWeb 08 program

I have been making changes to my site, publishing them to the web and all is fine. When I close out iWeb (and SAVE) not all of my changes are reflected when I reopen iWeb.
The published site is very fine, bu a lot of the changes I have made to the site are no longer reflected in my iWeb 08 program,

Hi,
First try to check if all the elements are in the transport rquest and then reptransport it...
If this still doesnt work, do the foloowing:
Run the prg : RSTXSCRP in Dev and EXPORT the script on to a desktop/location
Run the prg : RSTXSCRP in QA and IMPORT the script from the desktop/location specified above.
Hope this helps you
Regards
Sk

Changes not reflected in Change to Document (tcode CRMD_ORDER)

Hello Expert,
I made a change in field 'Planned Completion Date', in my transaction through tcode CRMD_ORDER.
When I view Change to Document (CRMD_ORDER > top menu > Extras > Change Documents), the change is not reflected.
All changes are usually captured in the Change to Document.
Perhaps it is captured somewhere else?
Please assist.
Thank you.
HJMY

Hi HJMY,
Check if the Change document object provided for CRM_ORDER has the field in the SAP provided structure. This can be verified in transaction SCDO -> select change document object CRM_ORDER and display, you will see list of structures on the left hand side, if the field you are refering to is a part of one of these structures then the changes in this field are displayed when you go to (CRMD_ORDER > top menu > Extras > Change Documents). If it is not present then you will have to create a new change document object and assign a proper structure, you can generate update program to update that change documents. Hope this helps.
Thanks,
Priyanka

Changes not reflecting in Report designer after Transports

Hi,
I have made some changes to a Report in the report designer and transported it to Quality and Acceptance systems. But the changes are reflecting in Quality system not in Acceptance server. In Acceptance sever the changes are seen in the report physically but when i execute the report i still see the old format. I tried transporting the request again to the system but no luck.
Cleared the Cache in Acceptance still no luck. Also regenerated the base query in RSRT and no effect on the report. Any idea?
Thanks,
Praveen

Hi Praveen,
Make sure you have collected all the objects of the report.
You may check this in (development) RSA1->Transport Connection. Select that report and see if any objects are still not under $TMP or under any other Package and not got collected in your previous TR.
Regards,
Pratap Sone

Logon.jsp changes not reflecting

i am changing logon.jsp and redeploying infoview but changes are not reflecting..Any help...
waht is the process to redeply after changing in logon.jsp

Hi Amita,
Are you trying to do Modifications under WAR files in Business Objects folder and trying to deploy it?
Did you try changing logon.jsp under InfoView folder under Tomcat?
Here is the document which has more information on WDEPLOY with examples
http://www.odesia.com/docs/BOXI_r4_new_release_docs/Administrator%20Guide.pdf

Changes not reflecting in JSP page

Recently we upgraded our server from orion to oc4j.When on the client side any changes were made in the java bean
its not reflecting immediately in the corresoponding jsp page or the application. We tried to look at all angels like class file in web-inf its changing there.The changes are taking place only after restarting the server. Pl give us valuable suugestion
Regards
Kumar

It is correct that the change in the JavaBean is not taking effect until you restart the server (as far as I know anyway).
If you are using version 9.0.4 or using a version that uses JDP 1.4.x try using the HotSwap tool which can dynamically reload classes on the fly. Excellent tool for development but not sure if it is recommended for a Production environment.
Also, if you are using JDK 1.4.x, try using JDeveloper 10g and it's excellent debugging tools for development, it will swap your classes into the running JVM if the debugger is switched on.

Updated new email & password in itunes but changes not reflected in iphone

I'm using iPhone4 and have updated my new email address and got a new password in my itunes account but the changes are not reflected in my iPhone so i cannot purchase apps with the iphone, only when connected to the store on my computer. Please tell me how I fix this problem?

And I tried syncing my phone after making the changes and it still isnt working.

Report changes not reflected in Portal

Hi,
I have a report designed in Business Intelligence Front end tool. I have added that report to a role created in BI backend and assigned the report to that role. I am executing the report in Portal through SSO and the report is executing successfully.
I made changes in the report and assigned it to the role again. When i execute the report in portal, the changes are not reflected. But when i check the same report in Portal using another team mate id, he is able to see the changed report. We checked the iview of the report in portal and the changed report is there in portal. But i donno why it is not showing up for me. We cleared the Browser cache and checked again but the result is same. We both have the same roles, so nothing to do with the Roles. I think the problem is in portal, but dont have an idea on where to check it.
Help me in this regard. Thanks for your time.
Regards,
Murali

Hello Murali,
This is strange but please do this simple test & confirm:
Run the iView using your colleague's id. Copy the complete URL from the browser.
Open another fresh browser session, pasting the URL login using your credentials.
What do you see now? Do you see the change?
This a simple method to filter out the issue..whether its related to backend or not.
Awaiting Reply.
Regards,
Ritu

Type defs changes not reflected in block-diagram constants?

I'm struggling with strict type-defs today.
If I create a strict type-def, say of a cluster with an enum in it, and save it. Then create a block-diagram constant from the strict type-def in a blank vi. Then make changes to the strict type-def (say, add another item to the enum), the block-diagram constant ghosts out , as it should. If I then select "Apply changes" from the strict type-def menu, the ghosted block-diagram constant becomes un-ghosted, as it should. BUT, it hasn't update!? If I look for the new item in the enum, it isn't there!? I'm sure it should be, right?
No changes that I'm making to my type-defs or strict type-defs are being reflected in my block-diagram constants (which are definitely still linked to the controls with "Auto-update from type-def" checked on). It does work for front panel controls and indicators though - just not block diagram constants.
I'm using LabVIEW 8.5.1, Win XP Pro. Any ideas anyone?
Thoric (CLA, CLED, CTD and LabVIEW Champion)

Solved. I think.
I tried a range of type-defined controls, including an enum, a ring list, a cluster with an enum inside it, and a cluster with a ring list inside it.
Changes to the enum items were reflected in all vi controls and block diagram constants.
Changes to the ring list items were not reflected in the controls or block diagram constants.
This snapshot shows the the last item available in each ring and enum list. Clearly the rings were not updated when the custom controls were. (Yes, I applied changes and saved too).
Switching to strict type-defs only impacted the front panel controls, as Ben highlighted, because this is GUI related. You can see from this second snapshot where all type-defs are now strict type-defs that all enums and rings updated to reflect all three items, but the block diagram rings are still out of date
I expect somebody will tell me now that this is normal behaviour???
Message Edited by Thoric on 09-10-2008 02:31 PM
Thoric (CLA, CLED, CTD and LabVIEW Champion)
Attachments:
custom_control_test.jpg ‏53 KB
custom_control_test_stricttd.jpg ‏54 KB

TLN changes not reflecting

Similar Messages

Maybe you are looking for