TLP client configuration with Apache

Can someone help out with configuring a TLP client and server to send SUN explorer output from client to server through Apache.

I'm getting closer, I finally got the connector to install
with the folling command line, and a 1.4 version of the JDK
installed:
C:\jdk1.4.2_13\bin\java -Dtrace.ci=1 -jar wsconfig.jar
-server coldfusion -ws apache -dir C:\Apache\conf -bin
C:\Apache\bin\httpd.exe -coldfusion -v
That was a lot of work for something that should be easy, I
hope Adobe corrects this problem in their installer soon, or at
least provides steps that are a little more clear for WinXP users.

Similar Messages

Client authentication with apache+mod_ssl+tomcat

Hello.
My question is a little bit off topic.
I try to read client certificates with request.getAttribute("javax.servlet.request.X509Certificate"), but the result is always null.
Probably it's null because I have nothing on the session. So my tomcat does not have the certificate. I use apache + mod_ssl + mod_jk + tomcat.
And here is my question: how did you configured apache and tomcat so that tomcat has the client cert ?
Thanks.

usually u generate a keystore for client, and mention that in ur SSL connector of tomcat
in apache, we need to configure things in ssl.conf

Weblogic Configuration with Apache 2.2

Hi ,
I am getting the below error configured weblogic 10.3.5 with apache 2.2
<HTML>
<HEAD>
<TITLE>Weblogic Bridge Message
</TITLE>
</HEAD>
<BODY>
<H2>Failure of server APACHE bridge:</H2><P>
<hr>Your content length exceeded INT_MAX<hr> </BODY>
</HTML>
Thanks,

http://middlewaremagic.com/weblogic/?p=7795 (see the load balancing section)

Issues in ssl configuration with apache server (using reverse proxy)

Hi,
I am able to use apache server as a reverse proxy to connect to Portal. When I enter the web server url as https://mywebserver.com, I am able to connect to the http url of the Portal. But the moment I try to connect to the https url of Portal with this https url, I am not able to connect to the Portal. Thus I am not able to use apache as a proxy server for https connections it makes. What must I do. I read that mod_proxy_connect needs to be used, but how do I use this?
The second problem is that I need to use more than one kind of mapping.
For example I must be redirected to the Portal even if I use http://webserver.com , or even if I use https://webserver.com or even if I use http://webserver.com/irj or https://webserver.com/irj or http://ipaddress-websserver/irj etc

I have SSLCertificateFile and
and SSLCertificateKeyFile .
My problem is with regard to ssl/CertificateChainFile?
what is this? Also how do I upload my J2EE Certificate into apache.
The problem is with Apache handshake is not happening.
I am forwarding the entire log during . I have put what I consider important in bold.Please have a look.
<b>----
</b>
Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1769): OpenSSL: Handshake: start
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: before/connect initialization
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv2/v3 write client hello A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1512): OpenSSL: read 7/7 bytes from BIO#629160 [mem: 47855a8] (BIO dump follows)
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1459): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0000: 16 03 01 04 1a 02                                ......           |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1488): | 0007 - <SPACES/NULS>
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1490): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1512): OpenSSL: read 1048/1048 bytes from BIO#629160 [mem: 47855af] (BIO dump follows)
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1459): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0000: 00 36 03 01 44 74 67 cb-38 b5 8e 42 3b 59 c3 6c .6..Dtg.8..B;Y.l |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0010: 23 5c 07 d0 8b 24 89 89-11 2e 0d 80 ed 1a 06 ea #
...$.......... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0020: 1d 10 b0 59 10 28 7c b4-02 cb d6 08 a8 e4 ea 5a ...Y.(|........Z |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0030: e5 88 5c 5d 90 00 39 00-0b 00 01 cc 00 01 c9 00 ..
]..9......... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0040: 01 c6 30 82 01 c2 30 82-01 2b a0 03 02 01 02 02 ..0...0..+...... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0050: 04 36 0b 23 72 30 0d 06-09 2a 86 48 86 f7 0d 01 .6.#r0...*.H.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0060: 01 04 05 00 30 14 31 12-30 10 06 03 55 04 03 13 ....0.1.0...U... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0070: 09 6c 6f 63 61 6c 68 6f-73 74 30 1e 17 0d 30 33 .localhost0...03 |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0080: 31 30 30 32 30 37 32 35-30 30 5a 17 0d 30 35 31 1002072500Z..051 |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0090: 30 30 32 30 37 32 35 30-30 5a 30 14 31 12 30 10 002072500Z0.1.0. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00a0: 06 03 55 04 03 13 09 6c-6f 63 61 6c 68 6f 73 74 ..U....localhost |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00b0: 30 81 9f 30 0d 06 09 2a-86 48 86 f7 0d 01 01 01 0..0...*.H...... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00c0: 05 00 03 81 8d 00 30 81-89 02 81 81 00 ef d6 ff ......0......... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00d0: a6 39 e1 64 a5 d3 fb 16-de 4e ee 1d 81 84 31 bc .9.d.....N....1. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00e0: e6 b7 96 07 3e 81 b9 94-d1 c1 e0 f9 00 3a 84 e8 ....>........:.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 00f0: 7a 30 11 cd 41 26 d6 6c-95 90 93 95 17 e0 1a b7 z0..A&.l........ |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0100: 00 0f 59 33 7d 1d f3 a0-83 17 c5 f3 7e b3 ad ed ..Y3}.......~... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0110: c9 60 ac af 9e 31 d2 ec-42 71 f9 c3 98 2e 93 f9 .`...1..Bq...... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0120: 9d c3 c4 3d b3 7d 9b 97-83 1c 6b bd c0 75 cc 96 ...=.}....k..u.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0130: dc b9 a0 1b 00 79 85 e4-19 1f 61 42 54 db 91 94 .....y....aBT... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0140: d8 1d 72 13 08 36 22 49-3b fb 05 dc 33 02 03 01 ..r..6"I;...3... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0150: 00 01 a3 21 30 1f 30 1d-06 03 55 1d 0e 04 16 04 ...!0.0...U..... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0160: 14 ed ed 02 af 94 13 59-1c 42 e6 69 40 e5 80 dd .......Y.B.i@... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0170: a4 e9 33 91 02 30 0d 06-09 2a 86 48 86 f7 0d 01 ..3..0...*.H.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0180: 01 04 05 00 03 81 81 00-2c 22 08 bd 71 b6 80 43 ........,"..q..C |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0190: 5a 2a 8b e8 62 34 b4 b4-84 8a 47 4b 97 5e bf dd Z*..b4....GK.^.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01a0: 17 4c 0a 1c b7 0e cd c5-d1 cc d8 77 cd 38 10 ef .L.........w.8.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01b0: 22 02 f0 02 7f a2 39 2b-53 eb 31 b6 18 49 37 a0 ".....9+S.1..I7. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01c0: 50 47 f2 34 ab 33 eb 5f-ec 5a f9 f7 53 5f 27 eb PG.4.3._.Z..S_'. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01d0: 02 7f b4 28 3e e8 b1 c7-59 df 2c 93 25 c5 34 14 ...(>...Y.,.%.4. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01e0: 7a 34 7c 45 b4 eb 6b 34-93 26 98 51 37 d3 e6 b0 z4|E..k4.&.Q7... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 01f0: 7f 83 e3 a9 04 d3 47 b3-3d de 43 57 27 45 82 c0 ......G.=.CW'E.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0200: 4d 48 bf c0 a7 2f 66 0c-0c 00 02 08 00 80 af 76 MH.../f........v |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0210: 1f f5 f6 48 a0 01 0f ed-55 4c 53 9a 7c 07 7a ba ...H....ULS.|.z. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0220: c7 9d 77 e8 8b c7 66 8f-80 03 18 c5 1f 4f 2a a0 ..w...f......O*. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0230: 08 6f 9f e3 13 94 30 56-e7 2f 96 7c 26 97 ba 12 .o....0V./.|&... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0240: aa fd 3e 43 e1 46 c2 d1-32 94 56 45 52 c0 24 6f ..>C.F..2.VER.$o |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0250: 38 e0 93 0f 3a f8 0a 7c-41 0e 4c 54 4f 5a 7e d4 8...:..|A.LTOZ~. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0260: 62 e6 71 cd a0 dc 1e 9b-17 e5 10 71 3c 9d c6 39 b.q........q<..9 |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0270: 05 50 b6 15 37 0b 68 4f-24 50 74 47 13 1c 74 d8 .P..7.hO$PtG..t. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0280: 81 27 81 71 3a 4a c5 26-7d b8 e6 21 b3 d9 00 80 .'.q:J.&}..!.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0290: 4f 6f 5d e6 2d dc 77 46-e6 77 b1 94 3d 65 5b b0 Oo].-.wF.w..=e[. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02a0: 3d 39 7a 6c a2 c7 0b e3-27 08 fa 48 8d 75 1a fe =9zl....'..H.u.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02b0: 32 e6 13 d1 31 65 7d d5-11 34 21 78 38 d1 11 fb 2...1e}..4!x8... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02c0: ea 59 8e 24 79 5a 4b c2-f7 98 22 51 9f a7 4d 2b .Y.$yZK..."Q..M+ |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02d0: 15 98 fe d4 43 4b 34 25-b3 9b b3 ae 57 d1 ea 69 ....CK4%....W..i |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02e0: 6e 02 7e 61 d7 80 b6 73-6a 3e ac eb 69 38 67 8f n.~a...sj>..i8g. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 02f0: a9 2a dc 93 3d 22 f3 6e-6a 5d 51 1f b1 b1 10 5e .*..=".nj]Q....^ |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0300: 82 28 48 0d 5a 78 f8 17-61 e0 c5 43 61 7a 42 6a .(H.Zx..a..CazBj |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0310: 00 80 42 fa 7e 11 b2 77-3a 8c de f1 52 5a e1 18 ..B.~..w:...RZ.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0320: d4 e7 8f ee 2c e0 06 ef-d5 37 87 62 07 14 d1 5a ....,....7.b...Z |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0330: ca 30 be fd dd 76 47 8f-ed f4 5f f3 64 6c 32 a9 .0...vG..._.dl2. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0340: d5 07 e2 9b f1 29 a3 bf-33 4a ed 72 6b 2e c3 0f .....)..3J.rk... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0350: 30 bd 13 a1 42 d8 f7 1d-58 8a 1c 53 d6 c3 c8 6e 0...B...X..S...n |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0360: 0e 51 e3 f5 a0 37 68 0d-04 c6 0e c4 4d cc ed 7c .Q...7h.....M..| |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0370: ef 8f 81 b3 52 34 0c 60-eb f8 01 19 cc 95 31 55 ....R4.`......1U |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0380: 7d 16 bf 0c df b8 e0 3d-8f 7c 7a 4a 64 98 93 59 }......=.|zJd..Y |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0390: eb ae 00 80 ef cb bc 38-ab 16 0e a2 b2 2d fa 0f .......8.....-.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03a0: da 55 2d 67 a8 b8 34 1b-bf 39 d9 d6 da 65 f2 8f .U-g..4..9...e.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03b0: 6f a2 b1 1d db bb d5 dd-ab cf 9e 63 00 e4 57 a5 o..........c..W. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03c0: 18 4a dc 60 b0 97 5d 67-34 96 bf a2 43 2b 7d 70 .J.`..]g4...C+}p |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03d0: d6 99 d2 31 d2 11 f4 f2-19 b8 0c 41 7d bf b1 7c ...1.......A}..| |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03e0: fb 31 cb 3e c2 0a e2 26-1a 7e 63 50 9b 62 c3 82 .1.>...&.~cP.b.. |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 03f0: ca cd 36 82 0c 56 5f 26-f6 cc c6 6f 03 92 cc f5 ..6..V_&...o.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0400: 6b 55 1a d6 92 f9 5b 59-18 c2 62 21 eb d8 a4 ea kU....[Y..b!.... |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0410: fd b6 3e f7 0e                                   ..>..            |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1488): | 1048 - <SPACES/NULS>
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1490): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 read server hello A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1207): Certificate Verification: depth: 0, subject: /CN=localhost, issuer: /CN=localhost
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1207): Certificate Verification: depth: 0, subject: /CN=localhost, issuer: /CN=localhost
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1207): Certificate Verification: depth: 0, subject: /CN=localhost, issuer: /CN=localhost
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 read server certificate A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 read server key exchange A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 read server done A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 write client key exchange A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 write change cipher spec A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 write finished A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1777): OpenSSL: Loop: SSLv3 flush data
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1512): OpenSSL: read 5/5 bytes from BIO#629160 [mem: 47855a8] (BIO dump follows)
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1459): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0000: 15 03 01 00 02                                   .....            |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1490): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1512): OpenSSL: read 2/2 bytes from BIO#629160 [mem: 47855ad] (BIO dump follows)
Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1459): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1484): | 0000: 02 28                                            .(               |
[Wed May 24 07:03:54 2006] [debug] ssl_engine_io.c(1490): ----
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1782): OpenSSL: Read: SSLv3 read finished A
[Wed May 24 07:03:54 2006] [debug] ssl_engine_kernel.c(1801): OpenSSL: Exit: failed in SSLv3 read finished A
[Wed May 24 07:03:54 2006] [info] SSL Proxy connect failed
[Wed May 24 07:03:54 2006] [info] SSL Library Error: 336151568 error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure
[Wed May 24 07:03:54 2006] [info] Connection to child 249 closed with abortive shutdown(server apacheserver:443, client j2eeserver)
[Wed May 24 07:03:54 2006] [error] (20014)Error string not specified yet: proxy: pass request body failed to j2eeserver:50001 (j2eeserver)
[<b>Wed May 24 07:03:54 2006] [error] (20014)Error string not specified yet: proxy: pass request body failed to j2eeserver:50001 (j2eeserve) from apacheserver ()
[Wed May 24 07:04:10 2006] [debug] ssl_engine_io.c(1523): OpenSSL: I/O error, 5 bytes expected to read on BIO#612610 [mem: 62ac80]
[Wed May 24 07:04:10 2006] [info] (OS 10060)A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. : SSL input filter read failed.
[Wed May 24 07:04:10 2006] [debug] ssl_engine_kernel.c(1787): OpenSSL: Write: SSL negotiation finished successfully
[Wed May 24 07:04:10 2006] [info] Connection to child 249 closed with standard shutdown(server apacheserver:443, client apacheserver)
</b>

HELP ME. Client Configuration with Data Guard

Hi,
I made a DATA GUARD configuration with Oracle 10g r2 and GRID CONTROL 10.2.0.3.
I've 1DB OMS, 1 DB primary, 1 DB standby phisical, 1 DB observer, fast-startfailover on.
Everything works fine: failover, switchover.
My question is: how the client knows what DB is open when the primary DB fail? How to configure the client can know what the DB is active?
thanks.

Configure the client failover in the tnsnames.ora. The How To will be in the Data Gaurd configuration guide you are using.

Newly installed coldfusion 11 configured with apache cannot read css/js/jpg files

I am sure I am missing something really easy, but I cannot get my css stylesheet to work on my fresh installation.
coldfusion 11 with apache 2.2
my cfm files can be parsed in subfolders, but a css file (or anything else other than cfm files) in the same folder doesn't seem to be working as hoped
if I type in something like "localhost/appName/css/main.css" I get a 404 File Not Found error
Does this error indicate an apache or coldfusion problem?
Thanks in advance for any help, Wayne

Hi Wayne,
Could you please confirm if the webroot you are referring to is the ColdFusion webroot, or Apache webroot.
CSS files in the ColdFusion webroot may not be served when explicitly requested through the Apache port, since Apache would not even forward the request to ColdFusion.
Of course, when a CFM page is requested, stylesheet's referenced within CFM pages must get loaded!
- Immanuel

Configuration with Apache 2.2 on WinXP

Hello
I just installed CF 7.0.2 on a WindowsXP machine running On
Apache 2.2. Installation goes fine, however when I try to restart
Apache it fails. The following line in httpd.conf causes it to
fail:
LoadModule jrun_module
"C:/CFusionMX7/runtime/lib/wsconfig/1/mod_jrun20.so"
I found a technote that I thought might help here:
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=8001e97
, however it seems to be for a different OS, and I can't get the
command line they give to work after adjusting the paths for WinXP,
it fails with "Exception occured while trying to get an MBean,"
when I inspect the log, the error that causes the exception is
this:
"java.lang.IllegalArgumentException: Object name cannot be
null"
Anyway, I'm not sure that TechNote will solve my problem at
all.
I would appreciate it if someone could help me out with this,
please feel free to let me know if you need any more info.
Thanks.

I'm getting closer, I finally got the connector to install
with the folling command line, and a 1.4 version of the JDK
installed:
C:\jdk1.4.2_13\bin\java -Dtrace.ci=1 -jar wsconfig.jar
-server coldfusion -ws apache -dir C:\Apache\conf -bin
C:\Apache\bin\httpd.exe -coldfusion -v
That was a lot of work for something that should be easy, I
hope Adobe corrects this problem in their installer soon, or at
least provides steps that are a little more clear for WinXP users.

Mod_jk load error with Apache on OS X

Hello -
I have been running CF9 on OS X with a MacPorts install of Apache 2.2.21 with no issues as a "standalone" server installation. To get ready for CF10 I have ben trying to get CF10 configured with Apache. The specefic error I am getting when launching Apache is:
Cannot load /Applications/ColdFusion10/config/wsconfig/1/mod_jk.so into server: dlopen( /Applications/ColdFusion10/config/wsconfig/1/mod_jk.so, 10): Symbol not found: _apr_stat$INODE64\n Referenced from: /Applications/ColdFusion10/config/wsconfig/1/mod_jk.so\n Expected in flat namespace\n /Applications/ColdFusion10/config/wsconfig/1/mod_jk.so
I have done the following:
1. Recompiled Apache and forced a 64-bit compile
2. Uninstalled CF9
3. Uninstalld and reinsalled CF10
4. apxs is installed in /opt/local/apache2/bin (listed asa requirement in one of the documentation PDFs)
5. This is a Lion 10.7.3 with Xcode 4.2.1 currently installed
The error listed above is only a warning. Apache starts and still servers html files. I am a bit stumped and have no experience with Tomcat. Any help in finding a solution to this problem will be appreciated.
Thank you
Richard

Made progress -
Setting the max_packet_size seemed to start the 1st time CF10 admin process, just like it did with CF9 the 1st time we access the administrator. Then, it just went to a blank white screen.
mod_jk.log reports:
[error] ajp_process_callback::jk_ajp_common.c (1825): Unknow ajp protocol code: 0F
[error] ajp_process_callback::jk_ajp_common.c (2426): (cfusion) connecting to tomcat failed
Now: here is something interesting:
Look at the end of the URL when it 1st attempts to access administrator: It is index.cfm?configServer=true or index.cfm?serverConfig=true
By removing this it allows me to simply click on the "continue" option and low and behold the CF admin comes up.
I also have an issue with topnav.cfm reporting a 400 (Bad Request)
Quiting the browser and comming back to CF Admin displays the login page but after enter username and password I land on index.cfm and it goes no further.
Refreshing the page starts to rope in various admin componets.
Also, it will not process any simple cfm template reporting an internal server error.
Hopefully this has to do with this being a beta.

Client copy with configuration data in R/3. Is there any effect on EBP sys

Hi all,
We are using classic scenario. Our client is reorganizing their Org structure for that we need to do client copy with only configuration data.
In this scenario we are uploading the master and transactional data through ALE in order to retain the same number ranges and the same data in EBP system.
My doubt is when we do config steps Define logical system and assign the logical system to the client and define Idoc message types etc... Is it necessary to run BBP_LOCATIONS_GET_ALL job. If yes the same data like Plant and storage location and all master data will override the existing data or not. And what about the open Purchase orders and open goods receipts.
Can you please reply immediately. It is very urgent.
Thanks in advance

waiting online

How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
Server 2008, and I'm running 2012.
Any suggestions or tips on how I can begin testing this with Server 2012?

Hi,
You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
If you need a sample .wcx file I have posted one here a couple of times. If you want I will look for it and post a link.
-TP
I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work. And I'm not sure what I would need to do with or how to create a .wcx file.
When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to:
https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

Policy Based Routing with VPN Client configuration

Hi to all,
We have a Cisco 2800 router in our company that also serves as a VPN server. We use the VPN Client to connect to our corporate network (pls don't laugh, I know that it is very obsolete but I haven't had the time lately to switch to SSL VPN).
The router has two WAN connections. One is the primary wan ("slow wan" link with slower upload 10D/1U mbps) and it is used for the corporate workstations used by the emploees. The other is our backup link. It has higher upload speed - 11D/11U mbps, (fast wan), and thus we also use the high upload link for our webserver (I have done this using PBR just for the http traffic from the webserver). For numerous other reasions we can not use the `fast wan` connection as our primary connection and it is used anly as a failover in case the primary link fails.
The `fast wan` also has a static IP address and we use this static IP for the VPN Client configuration.
Now the thing is that because of the failover, when we connect from the outside using the VPN Client, the traffic comes from the`fast wan` interface, but exits from the `slow wan` interface. And because the `slow wan` has only 1mbps upload the vpn connection is slow.
Is there any way for us to redirect the vpn traffic to always use the `fast wan` interface and to take advantage of the 11mbps upload speed of that connection?
This is our sanitized config
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group dc
key ***
dns 192.168.5.7
domain corp.local
pool SDM_POOL_1
acl 101
max-users 3
netmask 255.255.255.0
crypto isakmp profile sdm-ike-profile-1
   match identity group dc
   isakmp authorization list sdm_vpn_group_ml_1
   client configuration address respond
   virtual-template 1
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec profile SDM_Profile1
set security-association idle-time 3600
set transform-set ESP-3DES-SHA
set isakmp-profile sdm-ike-profile-1
interface Loopback0
ip address 10.10.10.1 255.255.255.0
interface FastEthernet0/0
description *WAN*
no ip address
ip mtu 1396
duplex auto
speed auto
interface FastEthernet0/0.3
description FAST-WAN-11D-11U
encapsulation dot1Q 3
ip address 88.XX.XX.75 255.255.255.248
ip load-sharing per-packet
ip nat outside
ip virtual-reassembly
interface FastEthernet0/0.4
description SLOW-WAN-10D-1U
encapsulation dot1Q 4
ip address dhcp
ip nat outside
ip virtual-reassembly
no cdp enable
interface FastEthernet0/1
description *LOCAL*
no ip address
ip virtual-reassembly
duplex auto
speed auto
interface FastEthernet0/1.10
description VLAN 10 192-168-5-0
encapsulation dot1Q 10
ip address 192.168.5.1 255.255.255.0
ip nat inside
ip virtual-reassembly max-reassemblies 32
no cdp enable
interface FastEthernet0/1.20
description VLAN 20 10-10-0-0
encapsulation dot1Q 20
ip address 10.10.0.254 255.255.255.0
ip access-group PERMIT-MNG out
ip nat inside
ip virtual-reassembly
!!! NOTE: This route map is used to PBR the http traffic for our server
ip policy route-map REDIRECT-VIA-FAST-WAN
no cdp enable
interface Virtual-Template1 type tunnel
ip unnumbered Loopback0
tunnel mode ipsec ipv4
tunnel protection ipsec profile SDM_Profile1
interface Virtual-Template3
no ip address
interface Virtual-Template4
no ip address
ip local pool SDM_POOL_1 192.168.5.150 192.168.5.152
ip forward-protocol nd
!!! SLOW-WAN NEXT HOP DEFAULT ADDRESS
ip route 0.0.0.0 0.0.0.0 89.XX.XX.1 5
!!! FAST-WAN NEXT HOP DEFAULT ADDRESS
ip route 0.0.0.0 0.0.0.0 88.XX.XX.73 10
ip nat inside source route-map FAST-WAN-NAT-RMAP interface FastEthernet0/0.3 overload
ip nat inside source route-map SLOW-WAN-NAT-RMAP interface FastEthernet0/0.4 overload
access-list 101 remark SDM_ACL Category=4
access-list 101 permit ip 192.168.5.0 0.0.0.255 any
access-list 101 permit ip 10.10.0.0 0.0.0.255 any
ip access-list extended FAST-WAN-NAT
permit tcp 192.168.5.0 0.0.0.255 range 1025 65535 any
permit udp 192.168.5.0 0.0.0.255 range 1025 65535 any
permit icmp 192.168.5.0 0.0.0.255 any
permit tcp 10.10.0.0 0.0.0.255 range 1025 65535 any
permit udp 10.10.0.0 0.0.0.255 range 1025 65535 any
permit icmp 10.10.0.0 0.0.0.255 any
ip access-list extended REDIRECT-VIA-FAST-WAN
deny   tcp host 10.10.0.43 eq 443 9675 192.168.5.0 0.0.0.255
permit tcp host 10.10.0.43 eq 443 9675 any
ip access-list extended SLOW-WAN-NAT
permit ip 192.168.5.0 0.0.0.255 any
permit ip 10.10.0.0 0.0.0.255 any
route-map FAST-WAN-NAT-RMAP permit 10
match ip address FAST-WAN-NAT
match interface FastEthernet0/0.3
route-map REDIRECT-VIA-FAST-WAN permit 10
match ip address REDIRECT-VIA-FAST-WAN
set ip next-hop 88.XX.XX.73
route-map SLOW-WAN-NAT-RMAP permit 10
match ip address SLOW-WAN-NAT
match interface FastEthernet0/0.4

Can you try to use PBR Match track object,
Device(config)# route-map abc
Device(config-route-map)# match track 2
Device(config-route-map)# end
Device# show route-map abc
route-map abc, permit, sequence 10
Match clauses:
track-object 2
Set clauses:
Policy routing matches: 0 packets, 0 bytes
Additional References for PBR Match Track Object
This feature is a part of IOS-XE release 3.13 and later.
PBR Match Track Object
Cisco IOS XE Release 3.13S
The PBR Match Track Object feature enables a device to track the stub object during Policy Based Routing.
The following commands were introduced or modified: match track tracked-obj-number
Cheers,
Sumit

Problems with exporting PWA views (grids in general) to Excel 2010 with Windows 8 + IE 10 as a client configuration

Hello,
I wondering if windows 8 + IE10 is a supported client configuration for PWA (Project Server 2010). I am unable to export PWA views to Excel 2010. No problems with Windows 7 + IE8/9
Any ideas?
thanks,
Daniel
Daniel Villacis

Hi,
We followed the below steps in the local machine and check the behavior.
a. Open the Windows registry editor (regedit.exe)
b. Go the location HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\excel.exe
c. Here, you’ll see a string value named “useURL”
d. Rename this value to something else. For example “useURLx”
Note: You might have to restart the machine to apply the registry change to take effect.

Issue with client configuration for CuciLync 9.2.5

Hi,
we are currently preparing the client configuration for CuciLync 9.2.5.
When CuciLync starts we don't want to see the CuciLync window in the foreground.
Therefore we use the 'hubvisible' setting.
%APPDATA% \Cisco\Unified Communications\Jabber\CSF\Config\jabberLocalConfig.xml
<userConfig name="hubvisible" value="FALSE"/>
In addition we use this setting in the file
ProgramFiles%\Cisco Systems\CUCILync\jabber-config-defaults.xml
At first it looks like that the setting works fine.
But CuciLync always resets 'hubvisible' to 'true'.
Any idea what needs to be done to ensure that the setting is not overwritten ?
Thanks in advance for your feedback
Best Regards
Carsten Lucy

that might help
http://mysite.voicebootcamp.com/index.php/free-video-labs/video/uc-collaboration-ccie-collaboration-chapter-4-1-voice-gatew

Configuring Streaming with Apache instead of IIS documents?

Hello everyone,
Does anyone have documentation for correctly setting up an Apache web server for steaming Zenworks Virtual Applications? The basic idea of putting the content off the root is straightforward but the other instructions seem to be geared specifically to IIS which we don't use.
Anyone have a few minutes to give a brief setup example for someone who is just dangerous with Apache?
-Nyle

Originally Posted by zeevromm
Nyle,
I'll see if I get anything like this from Spoon. I know nobody on the support team has streamed with Apache, so we don't have anything readily available.
If anyone else has been successful in setting this up, please post how you went about it.
Thank you so much for checking. I really appreciate it. We are a Novell SLES OES house and only use Windows servers for specific applications that we can't get for Linux. Deploying with Apache would be wonderful.

Svn with Apache Timeout issue

Hello Archers,
I've set up an svn Server with Apache folloing your wiki on my raspberry pi.
https://wiki.archlinux.org/index.php/LAMP
https://wiki.archlinux.org/index.php/Subversion_Setup
Unfortunately I get errors when I try to commit several files (15 or so). I think it is a timeout issue, however I don't know where to specify the timeout in the httpd.conf (or httpd-ssl.conf)
This is a client error message:
Commit failed (details follow):
Unexpected end of svndiff Input
And this the corresponding server side log:
[date] [dav:error] [pid 448:tid 2854220848] (70007)The timeout specified has expired: [client 192.168.178.55:63819] Timeout reading the body (URI: /Dokumente/!svn/txr/9-q/Music/myfile.mp3) [408, #0]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] mod_dav_svn close_stream: error closing write stream [500, #185004]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] Unexpected end of svndiff input [500, #185004]
I assume it is some error like this: http://subversion.apache.org/faq.html#s … -truncated
I think I don't have specified the timeouts correctly, since I haven't found the default option.
tl:dr
Do you know how to set the timeouts in the apache configuration file?
I very much appreciate your help.
arch on pi
Here are my configuration Files with my position for the timeout order:
httpd-ssl.conf:
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailed information about these
# directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html>
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Required modules: mod_log_config, mod_setenvif, mod_ssl,
# socache_shmcb_module (for default value of SSLSessionCache)
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#SSLRandomSeed startup file:/dev/random 512
SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
SSLRandomSeed connect file:/dev/urandom 512
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
Listen 443
## SSL Global Context
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
# Speed-optimized SSL Cipher configuration:
# If speed is your main concern (on busy HTTPS servers e.g.),
# you might want to force clients to specific, performance
# optimized ciphers. In this case, prepend those ciphers
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
# Caveat: by giving precedence to RC4-SHA and AES128-SHA
# (as in the example below), most connections will no longer
# have perfect forward secrecy - if the server's key is
# compromised, captures of past or future traffic must be
# considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is an internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
#SSLSessionCache "dbm:/run/httpd/ssl_scache"
SSLSessionCache "shmcb:/run/httpd/ssl_scache(512000)"
SSLSessionCacheTimeout 6000
## SSL Virtual Host Context
<VirtualHost _default_:443>
# General setup for the virtual host
DocumentRoot "/mnt/sda1/svn"
ServerName 192.168.178.48:443
ServerAdmin [email protected]
ErrorLog "/var/log/httpd/error_log"
TransferLog "/var/log/httpd/access_log"
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)
# require an ECC certificate which can also be configured in
# parallel.
SSLCertificateFile "/etc/httpd/conf/server.crt"
#SSLCertificateFile "/etc/httpd/conf/server-dsa.crt"
#SSLCertificateFile "/etc/httpd/conf/server-ecc.crt"
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
# ECC keys, when in use, can also be configured in parallel
SSLCertificateKeyFile "/etc/httpd/conf/server.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-dsa.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-ecc.key"
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convenience.
#SSLCertificateChainFile "/etc/httpd/conf/server-ca.crt"
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath "/etc/httpd/conf/ssl.crt"
#SSLCACertificateFile "/etc/httpd/conf/ssl.crt/ca-bundle.crt"
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded).
# The CRL checking mode needs to be configured explicitly
# through SSLCARevocationCheck (defaults to "none" otherwise).
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath "/etc/httpd/conf/ssl.crl"
#SSLCARevocationFile "/etc/httpd/conf/ssl.crl/ca-bundle.crl"
#SSLCARevocationCheck chain
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# TLS-SRP mutual authentication:
# Enable TLS-SRP and set the path to the OpenSSL SRP verifier
# file (containing login information for SRP user accounts).
# Requires OpenSSL 1.0.1 or newer. See the mod_ssl FAQ for
# detailed instructions on creating this file. Example:
# "openssl srp -srpvfile /etc/httpd/conf/passwd.srpv -add username"
#SSLSRPVerifierFile "/etc/httpd/conf/passwd.srpv"
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/srv/http/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is sent or allowed to be received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-5]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog "/var/log/httpd/ssl_request_log" \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
#SSLSessionTimeout 5m
Timeout 600000
<Location />
DAV svn
SVNParentPath /mnt/sda1/svn/repos
AuthzSVNAccessFile /home/svn/.svn-policy-file
AuthName "SVN Repositories"
AuthType Basic
AuthUserFile /home/svn/.svn-auth-file
# Satisfy Any
Require valid-user
</Location>
</VirtualHost>
httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
Timeout 60000
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#nach fehlermeldung
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#Felhermeldung undefined symbols
LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#nach Fehlermeldung
LoadModule cache_socache_module modules/mod_cache_socache.so
#nochne Fehlermeldung
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#Fuer die cipher suite
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#1 for svn
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#2 for svn
LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#3 for svn
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/mnt/sda1"
#<Directory "/mnt/sda1/svn/repos">
# # Possible values for the Options directive are "None", "All",
# # or any combination of:
# # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# # Note that "MultiViews" must be named *explicitly* --- "Options All"#
# # doesn't give it to you.
# # The Options directive is both complicated and important. Please see
# # http://httpd.apache.org/docs/2.4/mod/core.html#options
# # for more information.#
# Options Indexes FollowSymLinks
# # AllowOverride controls what directives may be placed in .htaccess files.
# # It can be "All", "None", or any combination of the keywords:
# # AllowOverride FileInfo AuthConfig Limit
# AllowOverride None
# # Controls who can get stuff from this server.
# Require all granted
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include /etc/httpd/conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Edit: inserted tl;dr
Last edited by arch_on_pi (2014-05-18 21:33:24)

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

TLP client configuration with Apache

Similar Messages

Maybe you are looking for