TLS Monitoring Incoming
The TLS alerts mechanism under the "destination controls setting" works great, but i need the same for incoming connections.
I wish to be informed about any failed TLS-connection with partner X.
Is there a solution?
I tried several filters, but without success.
e.g.
GUI
Order Condition Rule Delete
1
Other Header
header("from") != "TLSv1"
Notify
notify ("[email protected]")
any ideas?
Hello,
there is no alert functionality for incoming messages where TLS is required. This is basically because of the sender being in charge to enable TLS when they cannot establish a connection to you. A filter would not work because the message never enters the appliance. Or do you try to archive this with messages that have fall back to plain text (TLS preffered) when TLS could not be established?
Regards,
Andreas
Similar Messages
-
Monitoring incoming SOAP messages
Dear all,
I configured a SOAP scenario and provided the customer the URL, but the messages did not arrived our PI System.
After an analysis I think I configured the CC wrong. I set the adapter engine to Central AE instead of our AAE that is
also used in the Web Service URL.
But even after changing it, the message does not arrive the system.
How can I check if the message perhaps arrive the PI but did not pass caused but (probably) a wrong configuration?
Now after changing it to AAE, will it be displayed in DefaultTrace in NWA? I couldn't found there anything.
Regards
ChrisHi,
Try XPI inspector to monitor incoming SOAP message. You will get exact error if any.
Have a look to below blog -
Sender SOAP Adapter: HTTPS with Client Authentication
Regards
Aashish Sinha -
Batch Monitor - incoming network connection
When I run Compressor i get the "Do you want the application "Batch Monitor.app" to accept incoming network connection. Whilst this is a common popup for lots of apps the problem with this one is that it only flicks onto the screen for about 3/25's of a second and then disappears only to keep on popping up in this manner.
It's very annoying. Does anyone know how to deal with this ?
In order to identify this I had to film the screen and then work my way through the footage frame by frame to isolate it.Hardly that absurd. Compressor, for example, is designed to network with other instances across the network to distribute render processing...
If you're distributing an Export via Compressor from FCP, FCP is started on the networked computers to do local rendering...
Patrick -
IHow to monitor Incomming and put going Mail Trafic..?
Dear all,
I am using (Sun Java(tm) System Messaging Server version 6.30.15).
I want to monitor All the in-coming mails and out-going mails.
Basically, i want to get an idea about , how many mails we are getting per day....etc... How many mails send via this mail server etc.
This statistic want to our management...
Is there any method or tool available for this monitoring.
Thanks.
VirajIf you add the "logging" option to the relevant channels in imta.cnf (or put it on the defaults line), you can use the imslog.pl script in the /examples/unsupported directory.
-
Possible to check total incoming/outgoing size per domain?
Hello :),
Is it possible to see the top incoming or outgoing emails by total size?
The intention is to determine which domain or emails may be eating the network bandwidth.
Also, is there a Report to check the Incoming email graph/statistics a listener or specific domain receives? I tried Monitor > Incoming Mail, with the domain options but it does not show them. As we have several clients in the same Appliance we need a Report for the email that only client1.com or client2.com received.
Thank you in advance.
HugoMy unoffical answer is using Mail Flow Central in the unoffical way.
login the MFC mysql
select rcpt_domain,sum(message_size) as total_size from recipients r, messages m
where r.sid = m.sid
and r.mid = m.mid
and timestamp > unix_timestamp(date_sub(now(), interval 1 day))
group by rcpt_domain order by total_size desc limit 0,20
This will give the top 20 total message size processed by receipent domains of last 1 day.
This executes just forever if you want more days or add the transfer_id as a condition..(i left it out delibrately).
There are alternatives,
1.
In my experience, your incoming total size statistics can, alternatively, be generated by your ultimate message store server (sendmail/postfix/exchange).
Your outoging total size is a little difficult if not using the above tweaked method.
2.
scp the mail_logs out regularly, look for "MID XXXXXX ready YYYY bytes for "
Do some mining scripts.
Chris -
Monitor bandwidth utilization for Hyper-V's Virtual Machines
Hi,
I'm wondering, if SCOM is capable to monitor incoming & outgoing traffic (current and total over time) of VMs in Hyper-V?
Tried to search about it, and found only 3rd party tools or the monitoring is only available for Router, not VMs.
Thanks.Hi Andre,
Also you can use performance monitor to monitor the VM's bandwidth through counter "Bytes Received/sec" and "Bytes Sent/sec" under Hyper-v virtual network adapter :
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Help me with incoming mail report
Hello All,
I am new with cisco ironport. I was asked to provide a report on Incoming mail count over a period of time from a particular sender.
Could someone please help on how can i prepare such report. (if possible some more details like if any email was blocked, etc)
Model: C370
Operating System: 8.0.1-023
I'd be very thankful for any help in this regards.
- Mohit PathakI don't have my device infront of me to double check but i remember it should be something in the GUI > Monitor > Incoming Mail Summary
Here you can pull some reporting information for hour, day, week, month etc.
Else, you can organised scheduled reporting for incoming mail summary
This will show how many connections/messages were entered, filtered, dropped due to SBRS, dropped due to spam, virus or content filters and how many ended up clean -
Adding sender BCC to monitor outgoing email
Hello,
I was able to set up monitoring incoming mail with sender_bcc and that seems to work when mail is incoming and BCC's to a 3rd party to check the mail.
Now for the person sending an email to a person outside the organisation. Need to do that because the company has been made aware that emails have been sent out to the opposition.
Thanks.
MichaelIf you've setup sender_bcc rules in postfix then you already have what you need - just add the internal address to the sender_bcc configuration and you're done.
sender_bcc doesn't differentiate between 'internal' and 'external' addresses - if the sender of the message is in the list, it copies the message. The 'sender' could be a local user, or a remote user. It doesn't matter. -
Hi
Is there a place wherein we can monitor incoming calls to a Webservice exposed thru SOAP runtime on a WAS 640 box ? If so, could anybody out there provide the trasactioncode ?Hi Karthik,
We had a similar scenario, but what we did was slightly different from what you did.
We had an RFC in the R/3.
We had a interfaces defined for outbound and inbound (These interfaces are basically the RFC FM's Signature) and mapped element to element.
We have configured a SOAP to RFC scenario and generated a WSDL for the interface.
This wsdl can be consumed from xternal applications.
Using this approach we can moni the messages in SXMB_MONI of XI.
Revert if I misunderstood your question.
Regards,
Ravi Kanth Talagana -
Adobe Reader 9 - Printing error, ony get one pg. HELP!
Ok, I have installed Adobe Reader 9 as I had 5 and I kept getting a msg saying certain files were encrpted which is not true. Anyways, use it for work and now it doesnt print the complete document, it prints the first page and thats it. I've changed settings, and then im changed page ranges everything i still get only one page printed at a time!!! ITS SO ANNOYING!!!
I get alot of work related documents that have 20 pages more and dont have the time to be printing out every pages individually!!
SOMEONE PLEASE HELP!!!
thank youHi Shilpi,
Thank you for your response but unfortunately I can't. Due to the privacy laws I can't just send you documents that have personal information. Is there another way of fixing the problem?
Regards,
Lara Palejko
Administration & Property Management
223 The Boulevarde/PO Box A302
FAIRFIELD HEIGHTS NSW 2165
AUSTRALIA
Tel: (02) 9604 2366 Fax: (02) 9604 8568
Mail to: [email protected]
Website: www.propertypartnersrealestate.com.au
This email (including any attachments) is confidential. If you are not the intended recipient you must not copy, use, disclose, distribute or rely on the information contained in it. If you have received this email in error, please notify the sender immediately by reply email and delete the email from your system. Confidentiality and legal privilege attached to this communication are not waived or lost by reason of mistaken delivery to you. Property Heights Pty Ltd does not guarantee that this email or the attachment(s) are unaffected by computer virus, corruption or other defects. Property Heights Pty Ltd may monitor incoming and outgoing emails for compliance with its Email Policy. -
Servlet filter like functionality in WLS 5.1
We have a requirement to be able to:
1) monitor incoming servlet requests and do processing dependant on the
parameter values in the http request
2) monitor outgoing servlet responses and when we certain strings redirect
to another web page
In 6.1, we would simply use servlet filters.
However, we are on 5.1 and this requirement cannot force the upgrade.
So, I was wondering if there is any way on 5.1 to do this sort of thing. We
have control over our WLS environment, we cannot change the URLs the users
use and also the servlets the users are attempting to access are a
third-parties so we cannot change their source code.
Any ideas/pointers would be gratefully received.
Cheers
Ed
Many thanks
Regards
Ed
"Matt Krevs" <[email protected]> wrote in message
news:[email protected]...
> "So how do I then get the repsonse to the user?"
>
> write directly to the response in "myservlet".
> ie
> response.getWriter().println() etc
> or, from memory, get a servletoutputstream and write to it
>
> Bob Lee also mentioned using RequestDispatcher.include() which will also
> work if your 3rd party servlet is deployed in the same webapp as
> "myservlet". Not sure iof this will allow you to parse the response of the
> 3rd party servlet?
>
> "What would I do if (on the way out - back to the user) I just wanted to
let
> the response pass through."
>
> Map your 3rd party servlet do another url pattern and, from "myservlet" do
a
> RequestDispatcher.forward() or a response.sendRedirect()
>
> eg
> "/go" mapped to myservlet
> "/3rdparty" mapped to 3rdpartyservlet
>
> user requests "/go"
> myservlet forwards to "/3rdparty"
>
> "Ed Barrett" <[email protected]> wrote in message
> news:[email protected]...
> > Matt,
> >
> > What would I do if (on the way out - back to the user) I just wanted to
> let
> > the response pass through.
> >
> > I think you are saying
> >
> > /go maps> myservlet calls in new connection> 3rdpartyservlet
> (which
> > does the work) response to> myservlet
> >
> > So how do I then get the repsonse to the user?
> >
> > Also, I presume I will need double the number of request connections?
> >
> > Cheers
> >
> > Ed
> >
> > "Matt Krevs" <[email protected]> wrote in message
> > news:[email protected]...
> > > You could write a servlet that intercepts requests and reads responses
> > >
> > > For example, say you currently have a 3rd party servlet mapped to
"/go"
> > >
> > > Create you own servlet called Sniffer or something and map it to the
> "/go"
> > > URL pattern in weblogic.properties
> > >
> > > your Sniffer servlet could
> > >
> > > 1. examine the request and log the required data
> > > 2. manually create a Url instance, call the open() method and read the
> > > response generated by the 3rd party servlet
> > > 3. You could then parse that response and, based on some criteria then
> you
> > > could forward or redirect the user to the correct page?
> > >
> > > Sounds a bit messy I guess.
> > >
> > > "Ed Barrett" <[email protected]> wrote in message
> > > news:[email protected]...
> > > > We have a requirement to be able to:
> > > >
> > > > 1) monitor incoming servlet requests and do processing dependant on
> the
> > > > parameter values in the http request
> > > > 2) monitor outgoing servlet responses and when we certain strings
> > redirect
> > > > to another web page
> > > >
> > > > In 6.1, we would simply use servlet filters.
> > > >
> > > > However, we are on 5.1 and this requirement cannot force the
upgrade.
> > > >
> > > > So, I was wondering if there is any way on 5.1 to do this sort of
> thing.
> > > We
> > > > have control over our WLS environment, we cannot change the URLs the
> > users
> > > > use and also the servlets the users are attempting to access are a
> > > > third-parties so we cannot change their source code.
> > > >
> > > > Any ideas/pointers would be gratefully received.
> > > >
> > > > Cheers
> > > >
> > > > Ed
> > > >
> > > >
> > >
> > >
> >
> >
>
>
-
I got this error message instead of weekly report.
Anybody ever experienced this? How to fix it?
The Warning message is:
Report Query Failed
query_id: mga_overview_incoming_mail_over_time
data_source: CounterReportDataSource
error: <type 'type'> ('command_manager/command_client.py call|242', "<class 'reporting.query.exceptions.DatabaseQueryFailure'>", '', '[database/ReportCatalog.py run_report_queries|234] [reportdatasource/CounterReportDataSource.py query|131] [reportdatasource/CounterReportDataSource.py _parse_api_results|216] [reportdatasource/CounterReportDataSource.py _parse_interval_result_set|251] [reportdatasource/CounterReportDataSource.py _parse_interval_result|317] [reportdatasource/CounterReportDataSource.py _parse_standard_interval_result|326] [query/result.py next|239] [query/client.py _call|212] [command_manager/command_client.py call|242]')
Version: 5.5.1-011Yes, I did. Instead of a graph, I got this error message:
Error while receiving data.
There may have been an intermittent timeout during the database query.
Have you tried going onto the GUI interface and going to "Monitor > Incoming Mail", switching the Time range to display a Week and then clicking on the Printable button on the right hand corner.
I got this error message instead of weekly report.
Anybody ever experienced this? How to fix it?
The Warning message is:
Report Query Failed
query_id: mga_overview_incoming_mail_over_time
data_source: CounterReportDataSource
error: ('command_manager/command_client.py call|242', "", '', '[database/ReportCatalog.py run_report_queries|234] [reportdatasource/CounterReportDataSource.py query|131] [reportdatasource/CounterReportDataSource.py _parse_api_results|216] [reportdatasource/CounterReportDataSource.py _parse_interval_result_set|251] [reportdatasource/CounterReportDataSource.py _parse_interval_result|317] [reportdatasource/CounterReportDataSource.py _parse_standard_interval_result|326] [query/result.py next|239] [query/client.py _call|212] [command_manager/command_client.py call|242]')
Version: 5.5.1-011 -
Hi ,
I have scenario file-XI-R/3.I am not doing any mapping.
I have created 2 message interface say MOUT of type outbound with message type MT1 and MIB of type Inbound with message type MT2.
In Integration directory by mistake I have put MIB everywhere in sender and Receiever interface.But to my surprise everything worked fine and XI has not given any error message.Accoding to documentation we should use message interface of type outbound inorder to send data to XI.
Does anybody have any idea what could be wrong?
Thanks.
RekhaAre you using proxy on R/3 side ?
If so then direction does matter in this case. Since the proxy interfaces/classes are generated based on your inbound/outbound interfaces.
To generate inbound proxy you should have inbound interface. But looking at the problem description should'nt be problem since you have used inbound interface MIB on as a sender and receiver.
The messages in R/3 are in open staus or XI ?
You can logon to R/3 and use SXMB_MONI to monitor incoming messages. Check the status of messages in R/3 aswell.
Regards
Anand
Message was edited by: Anand Torgal -
IronPort Email get message size statistic for some period
How can I get SUM of message size for incoming and outgoing messages.
Something like:
Message Category
Messages
Message Size
Stopped by Reputation Filtering
21,7%
100
Stopped as Invalid Recipients
17,4%
80
Spam Detected
10,9%
50
Virus Detected
4,3%
20
Stopped by Content Filter
2,2%
10
Total Threat Messages:
56,5%
260
Clean Messages
43,5%
200
Total Attempted Messages:
460Hi Juraj,
the message size for the "Monitor - Overview" reporting page is not included. Only on the "Monitor - Incoming Mail" you will find the total message size per domain. Maybe you find something here, e.g. spamtowho which might be of help:
BR
Enrico -
Hi,
We are using Punchout catalogs through ECC sytem, how do i monitor incoming log foe Punchout in ECC 6.0? Normally in SRM if i go to SLG1 i should be able to see all the parameters which are passed from Catalog to SRM system, i cant do the same in ECC, i dont get any log for Punchout Catalog.
Am i looking at a wrong place?
Please let me know
thanks
ronnieHi Ronnie,
unfortunately the option you are looking for is not exists in R/3, only in SRM.
Please keep in mind that calling Catalog from Preq or PO has several limitations. this is one of them.
br, gabor
Maybe you are looking for
-
Movies on iPad and iPhone.
Evening all. I'm wondering if anyone can tell me if I'm missing something with the streaming feature in iOS7. If I go to the videos app I can see all of my purchased movies and TV shows. I can select anything to play and it does so just fine without
-
Problem with XML loading and xmlns
I'm having a problem with loading an XML file that was created by Filemaker. Filemaker will output an XML file using one of two different grammars. One outputs in a mostly standard form that I can use with one glitch. Flash CS4 AS3 seems to have a
-
Imovies - how do I seperate the videos from the photos. My library has bundled them all together from iphoto
-
Storing WAVE file into database from sql plus.
dear all I have create a table with two attributes,sl_no number and song long raw type. what will be the insert command to insert a .wav file into the database.if not then you can give me some alternate solution also. thanks.
-
Maximize page to fit screen width
Hi, I would like to maximize all the pages of the application to fit the entire screen size i.e. effect similar to F11. Please let me know how it can be done at application level. Thanks.