TM application versions

i just got a new macbook pro and am using Restore from Time Machine. My question is after the restore is done, does the computer revert to the older version of ilife on my original computer or keep the newer version that came with the new computer? if it reverts, how do i get the newer version?
thx

booist wrote:
yes, i selected utilities then restore from backsups. the installation couldnt complete (gave me that error message) and when i restarted it start giving me ms-dos like messages at start up. it gets to the desktop and it looks like my old computer, but when i try to shut down it goes to the ms-dos screen and stalls.
i'm restarting with the snow leopard disk now, i used disk utility to reformat the hard drive, and am reinstalling snow leopard now. i'm hoping just to get back to original factory settings. i'd be happy with that at this point and manually move my files.
You should be fine. After SL is loaded, and it re-starts, you'll be back exactly in the right place.
+Setup Assistant+ will ask if you already have a Mac; just follow the instructions. It should be quick and easy. Once it starts transferring, it may take a while (depending on how much stuff there is), but should not be a problem. You'll have all the same configuration, users, etc.
*Much, much* easier than manually reconfiguring and moving things.
any advice and/or idea what's up with the start-up dos thing.
I've never done that, so haven't seen it. Probably some Unix thing, I suppose. But don't worry about it: the reformat and reload will get you right back where you started.

Similar Messages

Each time I try to synch photos from my Windows 7 PC to my iPad2, iTunes stops working, and the error report says Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec35

Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
Problem Event Name:                          APPCRASH
Application Name:                             iTunes.exe
Application Version:                           10.3.1.55
Application Timestamp:                    4deec351
Fault Module Name:                          ntdll.dll
Fault Module Version:                        6.1.7601.17514
Fault Module Timestamp:                 4ce7ba58
Exception Code:                                  c0000005
Exception Offset:                                0002e3fb
OS Version:                                          6.1.7601.2.1.0.768.3
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
Any suggestions?

I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up again as soon as I click on the "Synch photos from" button.

WebLogic 11g: Weblogic-Application-Version not taken into account

Hello,
I'm trying to set up Production Redeployment on my EAR, under WebLogic 10.3.6.
However, I can't figure out how to make Weblogic-Application-Version work in MANIFEST.MF
Here is my EAR structure:
MyApplication
--- APP-INF
--- --- lib
--- --- classes
--- META-INF
--- --- application.xml
--- --- weblogic-application.xml
--- --- MANIFEST.MF <- file I update
--- WebApp1
--- --- META-INF
--- --- --- MANIFEST.MF
--- --- WEB-INF
--- --- --- classes
--- --- --- lib
--- --- --- web.xml
--- --- --- weblogic.xml
--- WebApp2
--- --- same as WebApp1
MANIFEST.MF content is the following:
Manifest-Version: 1.0
Weblogic-Application-Version: VERSION_1
The problem is that it's not taken into account when I deploy the application in the WebLogic console.
When I use staged mode, the line Weblogic-Application-Version: VERSION_1 is removed from the staged MANIFEST.MF file.
The only way to manage to version my application is to add the flag -appversion to weblogic.Deployer, but I don't want to use that on a Production environment (and it's not recommended in the documentation!).
Any idea why Weblogic-Application-Version not taken into account? I tried to add debug mode to node weblogic/debug but with no success.
Thanks by advance,
Julien

I tested it at my end and was able to redeploy it successfully with the application versions.
Are you saying that by deploying through weblogic console,the archive version is not honoring/getting picked up .is that correct?
if yes, what does your weblogic console shows for archive version,when you first try to deploy your application with the VERSION_1.
I mean,when you are on the "Optional Settings" Page.Do you see the Archive Version as VERSION_1?
Deployments >> Click on the Install >> select your application ( MyAPP)>> Install this deployment as an application >> Select deployment targets >> Optional Settngs
Example from the Optional settings Page for My application
What do you want to name this deployment?
Name: MyAPP
Archive Version:
VERSION_1
This can confirm that the application being deployed is versioned one and if it doesn't shows up,then you need to check why its not getting picked up.?
Moreover,You can enable the "deploy" debug flag to see whats going wrong in your case during the deployment process
Server > Debug > Weblogic > Deploy
Do refer the below viewlet on the Production Redeployment
http://download.oracle.com/otn_hosted_doc/wls/redeployment/wls-side-by-side-non-annotation_viewlet_swf.html

My itunes will not work and this is the error message. Problem signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     11.0.1.12   Application Timestamp:     50c8fc7e   Fault Module Name:     QuickTime.qts_un

Problem signature:
Problem Event Name:          BEX
Application Name:          iTunes.exe
Application Version:          11.0.1.12
Application Timestamp:          50c8fc7e
Fault Module Name:          QuickTime.qts_unloaded
Fault Module Version:          0.0.0.0
Fault Module Timestamp:          4ea5d609
Exception Offset:          653f1040
Exception Code:          c0000005
Exception Data:          00000008
OS Version:          6.1.7601.2.1.0.768.3
Locale ID:          1033
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information 4:          0a9e372d3b4ad19135b953a78882e789

I am encountering the same thing as I am trying to restore my iPhone. How to fix this? I tried repairing iTunes. Still having the issue.

How to reference application version number and current date in page footer

Am new to Apex and am creating first app for production users on Apex 4.0.1 ... I notice that Application Builder app itself displays the version number at bottom right of screen .. are there any substitution strings that I can use to get current date and application version in my own Apex app ... or do I need to create e.g Javascript to format the date and create my own substitution string ?
Any help much appreciated .. thanks !

I modified the Footer of our Default page template. Used JavaScript for the date, below is the code we use. The very last table is specific to our environment and it would need to be customized for your use or removed if not needed. I am a JavaScript novice so this may be crude but it does the job.
Jeff
<table width="100%" cellpadding="0" cellspacing="0"
border="0">
<tr>
<td width="500">
<script Language="JavaScript">

</script>
<script Language="JavaScript">

</script>
</td>
<td width="300" class="fineprint"><div align="right">
</div></td>
<td width="900" class="fineprint"><div align="right">
&APP_USER.
#APP_VERSION#
</div></td>
</tr>
</table>
<table width="100%" cellpadding="0" cellspacing="0"
border="0">
<tr>
<td width="33%" align="left" valign="bottom"><img
src="#WORKSPACE_IMAGES#iconseal-rust.gif" alt="NH State Seal" width="25"
height="25" /></td>
<td width="33%" align="center" valign="bottom"><a href="http://www.nh.gov/" class="fineprint">NH.gov</a>
<a href="http://www.nh.gov/disclaimer.html"
class="fineprint">Privacy Policy</a> <a
href="http://www.nh.gov/wai/index.html" class="fineprint">Accessibility
Policy</a></td>
<td width="33%" class="fineprint"><div align="right">Copyright &#169 State of
New Hampshire, 2007-2010</div></td>
</tr>
</table><br />
#FORM_CLOSE#
</body>
</html>

ITunes stops working moments after selecting . Microsoft offers to find solution but no response?Problem Event Name: BEX Application Name: iTunes.exe Application Version: 11.2.2.3 Application Timestamp: 5383f31a Fault Module Name:

Microsoft report gives details of problem:
Problem Event Name:
BEX
Application Name:
iTunes.exe
Application Version:
11.2.2.3
Application Timestamp:
5383f31a
Fault Module Name:
StackHash_0a9e
Fault Module Version:
0.0.0.0
Fault Module Timestamp:
00000000
Exception Offset:
00000008
Exception Code:
c0000005
Exception Data:
00000008
OS Version:
6.1.7601.2.1.0.768.3
Locale ID:
2057
Additional Information 1:
0a9e
Additional Information 2:
0a9e372d3b4ad19135b953a78882e789
Additional Information 3:
0a9e
Additional Information 4:
0a9e372d3b4ad19135b953a78882e789
I have tried reloading the iTunes player but same thing happens after selecting it.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

My itunes wount open when i try to open it this message comes up Problem signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     10.6.3.25   Application Timestamp:     4fd16377   Fault Module Name:     CRYPTU

when i try to open my Itunes this Message comes up
Problem signature:
Problem Event Name:    BEX
Application Name:    iTunes.exe
Application Version:    10.6.3.25
Application Timestamp:    4fd16377
Fault Module Name:    CRYPTUI.dll_unloaded
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    4ce7b847
Exception Offset:    68221040
Exception Code:    c0000005
Exception Data:    00000008
OS Version:    6.1.7601.2.1.0.768.3
Locale ID:    5129
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Taken at face value, you're having trouble with a Windows operating system file there.
Perhaps try an sfc /scannow. For instructions, see the following Microsoft document:
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7

I have not been able to open up Lightroom on my computer for over a year now. Whenever I double click on it, this comes up - can anyone help? Problem signature: Problem Event Name:APPCRASH Application Name:lightroom.exe Application Version:3.4.1.10

I have not been able to open up Lightroom on my computer for over a year now. Whenever I double click on it, this comes up - can anyone help? Problem signature: Problem Event Name:APPCRASH Application Name:lightroom.exe Application Version:3.4.1.10

First thing to try is the latest version of Lightroom (currently 5.6). If it don't crash, then problem solved - upgrade.
If Lr5 won't run on your machine, then Lr4 instead.
If both Lr5 and Lr4 crash on your machine, then at least you know it's a not a Lightroom version problem but something wonked in your system.
If you can't figure out how to resolve the crash on the system you have, then it's time for a new system (or try another converter/editor app).
PS - A few things to try:
* After re-installing new version, if that doesn't fix it, then get rid of all Lightroom-related data files (rename them so they can be restored), in case problem is in Lr data file.
* Remove all non-essential hardware in case problem is hardware/driver.
* Startup up machine with minimal software services.
* If still no go, consider updating driver software, including mainboard drivers and/or bios firmware if need be.
* Of course run all the system hardware and software diagnostics you can - problem could be failing disk or ram..
* Check system event logs for any clues.
If you don't know how to do some of these things - ask.
Do not say "you've tried everything" unless you want a lecture - there is most definitely something you haven't tried. It's like when you can't find your car keys - you haven't looked everywhere - there is somewhere you haven't looked!
PS - Has Lightroom EVER worked on your machine? what's changed since then..
Good luck,
Rob

My itunes wont work. I keep getting this Problem signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     10.7.0.21   Application Timestamp:     504d85d9   Fault Module Name:     QuickTime.qts_unloaded   Fault

My itunes usnt working. I keep getting this message.
Problem signature:
Problem Event Name:          BEX
Application Name:          iTunes.exe
Application Version:          10.7.0.21
Application Timestamp:          504d85d9
Fault Module Name:          QuickTime.qts_unloaded
Fault Module Version:          0.0.0.0
Fault Module Timestamp:          4f8f8a5b
Exception Offset:          70be1040
Exception Code:          c0000005
Exception Data:          00000008
OS Version:          6.0.6002.2.2.0.768.3
Locale ID:          1033
Additional Information 1:          b9b5
Additional Information 2:          063aa4ebde4a7a45f8c482e6ed282861
Additional Information 3:          b251
Additional Information 4:          0639314542445d4694fa87cff3be7aa4

Fault Module Name:          QuickTime.qts_unloaded
Fault Module Version:          0.0.0.0
Try updating your QuickTime player to the most recent version.

Problem signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec351   Fault Module Name:     MSVCR80.dll_unloaded   Fault Module Version:     0.0.0.0   Fault Module

Installed itunes for 64 bit windows 7 as instructed.
Installation successful, but upon opening itunes, I get this message:
Problem signature:
Problem Event Name:    BEX
Application Name:    iTunes.exe
Application Version:    10.3.1.55
Application Timestamp:    4deec351
Fault Module Name:    MSVCR80.dll_unloaded
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    4dcddbf3
Exception Offset:    72c129e1
Exception Code:    c0000005
Exception Data:    00000008
OS Version:    6.1.7600.2.0.0.768.3
Locale ID:    1033
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I've uninstalled and installed 3 times and get the same problem.
Please advise!

I am encountering the same thing as I am trying to restore my iPhone. How to fix this? I tried repairing iTunes. Still having the issue.

Problem signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     11.0.1.12   Application Timestamp:     50c8fc7e   Fault Module Name:     StackHash_0a9e   Fault Module Version:     0.0.0.0   Fault Module Times

ITunes app crashed after startup with following errors.
Problem signature:
Problem Event Name:                        BEX
Application Name:                             iTunes.exe
Application Version:                           11.0.1.12
Application Timestamp:                     50c8fc7e
Fault Module Name:                          StackHash_0a9e
Fault Module Version:                        0.0.0.0
Fault Module Timestamp:                  00000000
Exception Offset:                                00000000
Exception Code:                                  c0000005
Exception Data:                                   00000008
OS Version:                                          6.1.7601.2.1.0.256.4
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
Any ideas, tried reinstalling ITunes, no change.

I am encountering the same thing as I am trying to restore my iPhone. How to fix this? I tried repairing iTunes. Still having the issue.

Itunes not workin and the problem displays - m signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     10.5.3.3   Application Timestamp:     4f14cc3d   Fault Module Name:     QuickTime.qts_unloaded   Fault Mo

i tunes not working and the problem its displaying is
m signature:
Problem Event Name:    BEX
Application Name:    iTunes.exe
Application Version:    10.5.3.3
Application Timestamp:    4f14cc3d
Fault Module Name:    QuickTime.qts_unloaded
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    4cf45322
Exception Offset:    706e1040
Exception Code:    c0000005
Exception Data:    00000008
OS Version:    6.1.7601.2.1.0.256.1
Locale ID:    1033
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
please help.

im having this problem to ive uninstalled and installed but this still comes up!!
Problem signature:
Problem Event Name:    BEX
Application Name:    iTunes.exe
Application Version:    10.7.0.21
Application Timestamp:    504d85d9
Fault Module Name:    StackHash_0a9e
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Offset:    00000000
Exception Code:    c0000005
Exception Data:    00000008
OS Version:    6.1.7601.2.1.0.768.3
Locale ID:    5129
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789

I can't open firefox. These are the problem details. Problem Event Name: APPCRASH Application Name: firefox.exe Application Version: 23.0.1.4974 Appli

Problem Event Name: APPCRASH
Application Name: firefox.exe
Application Version: 23.0.1.4974
Application Timestamp: 520bc252
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6002.18881
Fault Module Timestamp: 51da3e27
Exception Code: c0000005
Exception Offset: 00066448
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
Additional Information 1: bfef
Additional Information 2: e8adce1c2b9e7be834b4063ac3c53863
Additional Information 3: bfef
Additional Information 4: e8adce1c2b9e7be834b4063ac3c53863
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

Hi i have a problem with itunes stopped working have tryed reinstalling downloaded new windows drivers this is the problem on control boardProblem Event Name: APPCRASH Application Name: iTunes.exe Application Version: 11.0.1.12 Application Ti

hi tryed reistalling itunes drivers repairing itunes etc any help would be greatly apreciated thankyou..
Problem Event Name:
APPCRASH
Application Name:
iTunes.exe
Application Version:
11.0.1.12
Application Timestamp:
50c8fc7e
Fault Module Name:
MSVCR80.dll
Fault Module Version:
8.0.50727.6195
Fault Module Timestamp:
4dcddbf3
Exception Code:
c0000005
Exception Offset:
0001500a
OS Version:
6.0.6002.2.2.0.768.3
Locale ID:
1033
Additional Information 1:
fd00
Additional Information 2:
ea6f5fe8924aaa756324d57f87834160
Additional Information 3:
fd00
Additional Information 4:
ea6f5fe8924aaa756324d57f87834160

Try gn_id's suggestion from the following post:
Re: iTunes 11 crashes when opening the store - no error message

Description Faulting Application Path:     C:\Program Files\Safari\Safari.exe Problem signature Problem Event Name:     APPCRASH Application Name:     Safari.exe Application Version:     5.34.57.2 Application Timestamp:     4f982b5e Fault Module Name:

Description
Faulting Application Path:    C:\Program Files\Safari\Safari.exe
Problem signature
Problem Event Name:    APPCRASH
Application Name:    Safari.exe
Application Version:    5.34.57.2
Application Timestamp:    4f982b5e
Fault Module Name:    KERNELBASE.dll
Fault Module Version:    6.1.7601.18015
Fault Module Timestamp:    50b83b16
Exception Code:    80000003
Exception Offset:    0003491e
OS Version:    6.1.7601.2.1.0.256.1
Locale ID:    1033
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
Extra information about the problem
Bucket ID:    3349202712

im having this problem to ive uninstalled and installed but this still comes up!!
Problem signature:
Problem Event Name:    BEX
Application Name:    iTunes.exe
Application Version:    10.7.0.21
Application Timestamp:    504d85d9
Fault Module Name:    StackHash_0a9e
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Offset:    00000000
Exception Code:    c0000005
Exception Data:    00000008
OS Version:    6.1.7601.2.1.0.768.3
Locale ID:    5129
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789

CS5 has stopped working pop up everytime when selecting fonts. details: Problem signature:   Problem Event Name:APPCRASH   Application Name:Illustrator.exe   Application Version:15.1.0.39   Application Timestamp:4d76c9e3   Fault Module Name:CoolType.dll

Stops responding, etc
details
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Illustrator.exe
Application Version:    15.1.0.39
Application Timestamp:    4d76c9e3
Fault Module Name:    CoolType.dll
Fault Module Version:    5.7.83.9418
Fault Module Timestamp:    4c296b69
Exception Code:    c0000005
Exception Offset:    00021ae1
OS Version:    6.1.7601.2.1.0.768.3
Locale ID:    1033
Additional Information 1:    8e1b
Additional Information 2:    8e1b636bd3438ac15d03ef1549553b25
Additional Information 3:    1b31
Additional Information 4:    1b316dab8b65bf468124c367b4a50e14

But I am assuming that when I make the installer, the 32-bit Run Time Engine is appened with the installer, as show below
Since from the picture you can see its including the support installers from '\Program Files (x86)\'
The application runs queries to fetch data from database in SQL server 2008, and for that I am using a Microsoft SQL Native Client 2008 R2 64 bit ( this is the only version that installs on either PC, even the one on which I developed my LV Application).
I am not using any driver, only toolkits for reports - and for that I un-checked the "Remove unused polymorphic VI instances" when making the executable, otherwise LV throws up an exception that share variable are not being included.
Yes I did reboot every time after I ran the installation.
Still getting the same error.

TM application versions

Similar Messages

Maybe you are looking for