TM automatically ejects backup disk image when using Airport network disk?

I finally got TM functioning using an external HD connected to my AEBS network. It creates a sparsebundle on the external HD which turns into a disk image on the computer whenever it is backing up or I launch TM. On my wife's MacBook, the disk image automatically disappears after TM has backed up or I quit the application. On my MacBook (about a year older), the disk image stays there. When I try to eject it manually, sometimes it says it is still being used and takes a while before it disappears, but other times it goes away immediately. Why does this happen automatically on my wife's computer but not on mine. Same OS - 10.5.4. This is not a big issue, but it is a nagging one. Any insight would be appreciated.

I tried to start the backup again, after logging out and back in again (as I had done several times before), but this time the sparsebundle loaded ok and the backup started properly.
So there's no need for anyone to spend any time on me.
Graeme

Similar Messages

How stop PS6 from removing the DPI value from an image when using "save for the web"?

How stop PS6 from removing the DPI-value from an image when using "save for the web"?
Example:
- Open a tif image, that contains a dpi value (resolution).
- Use the splice tool in PS6.
- Export the slices with "Save for web", as gif-files.
Then the dpi value is removed, the gif files has no dpi value (it's empty).
How can we stop PS6 from removing the dpi value when using "save for web"?
OR:
When using the slice tool, how can we save the sliced pieces without PS removing the dpi value?

you can make your art go a little bit over the bounds. or you can make sure your artboart and art edges align to pixels

Will pages automatically reformat to correct size when using Folio Builder or do I have to make pages iPad format, for example, in InDesign document set up from the start?

Will pages automatically reformat to correct size when using Folio Builder or do I have to make pages iPad format, for example, in InDesign document set up from the start?

Moved to DPS forum.
You need to set up the pages appropriately for the target device. For iPad that's 1024x768.

AI CS6 vectors turn into embedded image when using clipping mask

AI CS6 vectors turn into embedded image when using clipping mask, how to solve it?

With the Clipping Mask selected go here

Is there any way to stop the delay between different sets of speakers when using airport express?

Is there any way to stop the delay between different sets of speakers when using airport express?

Unfortunately, I don't have either a Slingbox or iHome speakers so I won't be able to reproduce any of the issues you are having. With the fact that you live in large apartment complex would still lead me to believe that Wi-Fi interference may be the reason that you are having streaming issues.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.

Iphone 4s getting hot up when using the network. is it a sim problem

iphone 4s getting hot up when using the network. is it a sim problem or battery problem?

You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

In Firefox 3.6.10 I was able to go forward and backwards between pages without the page defaulting to the top of the page. Is there any way to prevent the page from automatically moving to the top when using the forwards and back buttons in Firefox Four?

I like to be able to navigate backwards and forwards without having to scroll down and find where I was previously. In Firefox Four, when using the forwards and back buttons, the page will automatically return to the top of the page. Is there any way to change this setting in Firefox Four to prevent it from doing that?

Thanks for the response. No Time Machine, but I probably have a backup from a few months ago on an external hard drive. :/ I guess it'd have useful history, but not if it overwrote the last 3 months or so of Awesome Bar, that might not be so great.

Moving original images when using a "referenced" iPhoto library...

Hello.
My iPhoto library is "referenced" (ie. iPhoto does not copy the images when importing) to my RAW image library which is manually organized outside the iPhoto library. If I want to move the location of these images, does anyone know how iPhoto handles this? Does iPhoto loose track of them when I move them? Will I have to individually re-link all the images? Is there a good way of going about this?
Any advice would be appreciated.
Thanks,
Kristin.

I've had a test alias library find all of the files automatically when the move was to a different location on the same hard drive. Moving to another hard drive it was hit or miss as Terence mentioned. Sometimes re-pointing to a single file in a folder got the whole folder, sometimes not.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Weird Scrambled images when using Intel HD Graphics

I recently bought a new 15" Macbook Pro and I have been seeing some really weird scrambled images when it is using the integrated graphics. I mostly notice it when switching to Top Sites in Safari or when using Spaces. Now, when I open a program to force the graphics to switch to the discrete 330M card (1Password triggers it, oddly enough), the images correct themselves within a second or two. I tried to take a screen grab using Grab, but that actually scrambles the image even more. Is anyone else seeing this, or is this a sign of a hardware failure?

I also have the same problem, only different circumstances. I've noticed there are several websites that I can go to that yield this issue, and for me the fix was to go into the Energy Saver system preferences and uncheck the Automatic Graphics Switching box. An example of an issue I'm currently experiencing is:
Visit http://www.macsimumnews.com/index.php/archive/applepatents_hint_at_final_pro_changes_and_or_new_media_presentationsoftw/
then click on the Reader button and the Safari window background gets all mangled. Click on the reader button again and it all goes away. Now repeat with that system preference turned off and it won't do it anymore.
Please advise if you can reproduce this. (Oh, this obviously is only for 2010 MacBook Pros that have that system preference option in the first place).

Color Settings: Getting colors in PS CC to match colors of the image when used as a Windows Background

or vice versa. I probably do not know enough to be able to ask the question properly.
The colors of photos in PS CC are not the same when used as a desktop background in Windows 7. The colors are somewhat more saturated when as a background on the desktop and while not totally unusable, it would be nice to have matching color between my PS editing screen and the photo as viewed as a desktop background.
The following are some conditions that may or may not be relevant to the answer of my following question.
1.) I am a complete novice to Color Management so a presumption of knowledge and the heavy use of jargon may not penetrate my head.
2.) I shoot with sRGB embedded in my photos.
3.) My RAW conversions use sRGB IEC61966 - 2.1.
4.) My PS Color Settings are North American General Purpose 2 with sRGB IEC61966 - 2.1 as the working space and Intent as Relative Colormetric
5.) In the Win 7 Control Panel>Color Management>Device, my Device = NEC LCD2690wuxi, ICC Profile = NEC LCD2690wuxi (default), file name = nl269wui.icm
6.) In the Win 7 Control Panel>Color Management>Advanced, Device profile = System Default sRGB IEC61966 - 2.1 and (everything else set to System Defaults too). The only difference from the PS Color Settings being that Windows is defaulted to Perceptual Intent, but a change in either PS or Win 7 has no effect on the relative color differences.
7.) The monitor is set to the Native internal preset, but the relative differences in color remain the same even if the monitor is changed to sRGB, or any other internal preset.
8.) I have Proof Setup set to Monitor RGB but none of the settings will match the Win 7 Background color.
Now, my question is this. How would you set up your color settings/profile in PS and/or Windows to match color between PS and the Windows desktop of Windows 7?

Nevermind. I didn't have Proof Colors checked.

Line along "bottom" of image when using camera on iPhone 4

Hi all
So I have a brand new iPhone 4 and everything seems fine, except for an issue when taking pictures with the camera, which I have a sneaking suspicion is a hardware fault. I'm hoping not, but I don't hold out much hope...
So when I take pictures, I have a line parallel with the bottom (side with the home button) of the iPhone. This appears both in the preview image when taking a shot, and on the saved image. It does not show when shooting video, but I have noticed the image is zoomed in slightly when shooting video, and the line is not in this.
The line is approximately 1cm away from the edge of the screen. This is not a discoloration, like with the bonding agent, it looks like a line of pixels.
I have taken a picture, but can't see how to upload it on this forum. If it'll help, I'll upload elsewhere and link it.
Thanks in advance for any suggestions.

And also when I completely turn my iphone off it doesn't reboot when I hold the power button in and I had to do a soft reset to make it restart but even when I did that it wouldn't reboot and about 1 hour later when I tried it again it did the screen was white with nothing on it apart from a small oval in the middle of the screen showing my lock screen and it took 4 hours for it to sort itself out and then it started flickering :( :( please someone help what can I do??!!

All websites automatically going to Mobile versions when using safari and firefox (likely started after mavericks update) Anyone have any idea how to fix this?

Not exactly all websites but many seem to be defaulting to their Mobile versions when using my Macbook Air... this is not dependent on browser type (Safare, chrome and firefox have been tried)... this is a new problem and may have started after the Mavericks update (although I am not 100% sure about the timing).
Has anyone had this problem? Any idea how to fix this?

Not exactly all websites but many seem to be defaulting to their Mobile versions when using my Macbook Air... this is not dependent on browser type (Safare, chrome and firefox have been tried)... this is a new problem and may have started after the Mavericks update (although I am not 100% sure about the timing).
Has anyone had this problem? Any idea how to fix this?

Cannot receive calls when using Edge network for data?

Hi,
This afternoon someone was trying to reach me urgently and all her calls to my iPhone went straight into my voicemail. My phone never rang and never showed missed calls.
I spoke to Aaron at Apple, thinking there might be a problem with my phone, and he told me that when the Edge network is in use, then the phone will not ring and calls will be routed straight to voicemail.
Is this really expected behavior? I was not aware of it.
iPhone 8GB

This has nothing to do with EDGE all other phones will notify you and pause the connection. i posted about this 2 days ago but the thread got deleted.
here is a video that proves this, the noise is from the GSM but the user is clearly on the edge network.
http://youtube.com/watch?v=NMm2AY-_TTY
this is from Tier 2 suport at Apple.
Everyone having this issue should call 1-800-MY iPhon. Ask to speak to Tier II support, the person you get may try to help, and may need to give you a case number. You'll probably have to wait a while on hold.
I just spent an hour on the phone with Tier I & II. The tier I guy started by saying that when you use EDGE it will always go to voicemail. I told him, I was on a user forum & some people said they don't have the issue. He then tested it on his phone & experienced the direct to v-mail issue. We talked about how this was a real problem & how both of our nokia phones didn't have this issue (he actually had the E-61 also). He gave me a case number & transferred my to tier II. The tier II guy told me that this was a software issue. That a pop-up needs to be designed into the software to allow the user the option to disconnect the data connection & accept the voice call, or not. I told him that I'd read on a user forum that some users get voice calls while using EDGE. He said that if they are using you tube the call will automatically interrupt & switch out of you tube. We then tested this on my iPhone & it worked (i.e. the call interupted you tube). He said the software currently decides to disconnect data or send calls to voice mail during EDGE transmissions based on what the user is doing. Phone calls take priority over you tube & widgets (stock & weather)but safari and e-mail take priority over phone calls. He said the thought was, it would be more annoying to users to be in the middle of sending an e-mail and having mail disconnected for a phone call, than having the call go to voicemail. The ideal solution is to have a choice (like other phones allow) but right now the iPhone software does not have a pop-up designed allowing the user to accept the call or keep the data connection. (He seemed to be familiar with this on other phones while being tethered to a macbook to use their data connections & getting voice calls during downloads).
He said he was submitting this to the engineering group & said the more people that call tier II about this & submit it as an issue via online feedback, the higher priority it will get to be addressed in the first software update. So if you want to see this fixed start calling and submitting the issue http://www.apple.com/feedback/iphone.html in as much detail as possible (specifically say that other existing phones Nokia S60s etc. have this function).
and here is a thread that is discussing this serious problem. note it is now many pages long.
http://www.howardforums.com/showthread.php?t=1197377

Problem on loading DAT file when using 3G network modem

Hello,
I'm having some strange problem when I'm trying to load my game on the part where DAT file with Map Object is read, using 3G Network Modem. This issue started when I migrated my applet from one host to another. Everything loads well, until the user authentication. On user authenticatiom I'm recieving map name which I should load and show the user on it. I'm recieving the message where map name is mentioned, but after, when the process of loading map begins(when I need to read DAT file which is only 15KB) application blocks(browser and JVM also block).
I thought it could be because of slow network communication, but it's not the reason, since I have tested(using Bandwidth limiter software) with 5 KBs/Second and it loads well and application is running well.
Any clue why this can happen? If code is needed I'll post some pieces related to the process of map creation.
URL or application: [ http://mimosa.dei.uc.pt/serhiy/demo/hoonline.html|http://mimosa.dei.uc.pt/serhiy/demo/hoonline.html]
Accounts: test01/test01 ... test0n/test0n ... test05/test05 (n is number from 1 to 5)
Thanks in advance!

You have to upload it with FileReference.upload() to a PHP
(or other server-side) script which saves it to a folder on the
server. When the DataEvent.UPLOAD_COMPLETE_DATA event has been
dispatched you can then use the FileReference.name to load from the
file on the server just like any other image.

Shared PC stuff dissappears when using Airport anything.

I have a cable modem hooked to a Linksys router and switch. Several PC's sharing disks and printers are hooked to the switch. When I plug my Mac directly into the switch it 'sees' the shared disks on the PC's but not the printer (another topic). When I unplug the Mac and put the same wire into my new Airport Extreme instead, the Mac hooks up to the internet fine, but the shared disks from the PC's are gone. Is it a port issue and on the AE or the Linksys? I swear I'm a dummy at this.
I love my new Macbook Pro, but there are still a few things to do.
1. Can see shared pc drives but not if using Airport Extreme or Express to connect to my home network.
2. USB drive works only when plugged into Mac. Not when plugged into PC or Airport Extreme.
3. Shared printers on the PC's can't be found by the Mac no matter what I try.
Maybe this isn't all for this topic, but then again, maybe they are related.
Mac newbie, MissMyApple][+ (it's in a box in the attic)
Thanks in advance for any help.

When I unplug the Mac and put the same wire into my new Airport Extreme instead, the Mac hooks up to the internet fine, but the shared disks from the PC's are gone. Is it a port issue and on the AE or the Linksys?
In this network configuration, you, effectively, have two routers, the Linksys and the AEBS...which will create two networks, and why your Mac can't "see" the PCs. To fix this, you just need to set up the AEBS as a bridge so that it acts like a wireless access point.
To set up the AEBS as a bridge, temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the AEBS, and then, using the AirPort Utility (found in /Applications/Utilities), make these settings:
Internet - Internet Connection tab
- Connection Sharing: Act as a bridge
- Click Update to apply the new settings.

TM automatically ejects backup disk image when using Airport network disk?

Similar Messages

Maybe you are looking for