TM  backup takes too much space

I restored the boot disk (Macintosh HD) from TM's last backup.
The first new backup takes too much space on your external drive!
Is it true?
Macintosh HD:
Capacity: 250.66 GB
Available: 130.01 GB
Message was edited by: tamias

Thank you, I understand.
I have 3 partitions and I just restored the system partition, the other two were normal.
Macintosh HD:
Capacity: 250.66 GB
Available: 131.05 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Work:
Capacity: 374.11 GB
Available: 160.36 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Work
Extra:
Capacity: 73.3 GB
Available: 31.64 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s4
Mount Point: /Volumes/Extra
I must have three times to recover the system partition.
I'm not sure that the drive for 1 year of operation is out of order. During the day the computer works fine, but every morning after wake up,
when disc is cold ,
and after 2 - 3 minutes go to freezing all apps. It seems that does not see the HDD.
After a forced shutdown and restart the system sometimes can boot normally and without error in the file system, but often does not load.
After several attempts to boot the system it is still loaded, but disk utility shows :
2009-02-04 13:46:25 +0800: Verifying volume “Macintosh HD”
Starting verification tool: 2009-02-04 13:46:25 +0800
2009-02-04 13:47:53 +0800:
2009-02-04 13:47:53 +0800: Performing live verification.
2009-02-04 13:47:53 +0800: Checking Journaled HFS Plus volume.
2009-02-04 13:47:53 +0800: Checking Extents Overflow file.
2009-02-04 13:47:53 +0800: Checking Catalog file.
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: Incorrect block count for file indexr3_db
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: (It should be 2080 instead of 2264)
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: Incorrect block count for file indexr3_repo
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: (It should be 8932 instead of 9180)
2009-02-04 13:47:53 +0800: Checking multi-linked files.
2009-02-04 13:47:53 +0800: Checking Catalog hierarchy.
2009-02-04 13:47:53 +0800: Checking Extended Attributes file.
2009-02-04 13:47:53 +0800: Checking volume bitmap.
2009-02-04 13:47:53 +0800: Checking volume information.
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: The volume Macintosh HD needs to be repaired.
Repair can not restore the system partition. I restore the Macintosh HD from last backup and it works well deep into the night!
Maybe temperature sensor does not work, or is a hard drive?
Thank you, I understand.
I have 3 partitions and I just restored the system partition, the other two were normal.
Macintosh HD:
Capacity: 250.66 GB
Available: 131.05 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Work:
Capacity: 374.11 GB
Available: 160.36 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Work
Extra:
Capacity: 73.3 GB
Available: 31.64 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s4
Mount Point: /Volumes/Extra
I must have three times to recover the system partition.
I'm not sure that the drive for 1 year of operation is out of order. During the day the computer works fine, but every morning after wake up,
when disc is cold ,
and after 2 - 3 minutes go to freezing all apps. It seems that does not see the HDD.
After a forced shutdown and restart the system sometimes can boot normally and without error in the file system, but often does not load.
After several attempts to boot the system it is still loaded, but disk utility shows :
2009-02-04 13:46:25 +0800: Verifying volume “Macintosh HD”
Starting verification tool: 2009-02-04 13:46:25 +0800
2009-02-04 13:47:53 +0800:
2009-02-04 13:47:53 +0800: Performing live verification.
2009-02-04 13:47:53 +0800: Checking Journaled HFS Plus volume.
2009-02-04 13:47:53 +0800: Checking Extents Overflow file.
2009-02-04 13:47:53 +0800: Checking Catalog file.
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: Incorrect block count for file indexr3_db
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: (It should be 2080 instead of 2264)
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: Incorrect block count for file indexr3_repo
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: (It should be 8932 instead of 9180)
2009-02-04 13:47:53 +0800: Checking multi-linked files.
2009-02-04 13:47:53 +0800: Checking Catalog hierarchy.
2009-02-04 13:47:53 +0800: Checking Extended Attributes file.
2009-02-04 13:47:53 +0800: Checking volume bitmap.
2009-02-04 13:47:53 +0800: Checking volume information.
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: The volume Macintosh HD needs to be repaired.
Repair can not restore the system partition. I restore the Macintosh HD from last backup and it works well deep into the night!
Maybe temperature sensor does not work, or is a hard drive?
WDC WD7500AAKS
Total Capacity : 698.6 GB (750,156,374,016 Bytes)
Message was edited by: tamias

Similar Messages

  • Finishing Backup takes too much time.

    Finishing backup takes too much time in my system , sometimes 30 minutes even 1 hour! and sometimes right after finishing backup(before the icon in the menu bar stops) it starts to take another backup( and usually 10MB or something small !) or the estimation is wrong .
    Sometimes I see my system that is taking backups hours and hours(just with small stops!)
    and the speed rate I of data transfer is reduced, while I set it to be on maximum speed in Time Capsule.

    And the log with Time-stamps from Console
    4/6/09 2:31:24 PM /System/Library/CoreServices/backupd[2141] Starting standard backup
    4/6/09 2:31:34 PM /System/Library/CoreServices/backupd[2141] Mounted network destination using URL: afp://[email protected]/Sina's%20Time%20Capsule
    4/6/09 2:31:34 PM /System/Library/CoreServices/backupd[2141] Backup destination mounted at path: /Volumes/Sina's Time Capsule
    4/6/09 2:31:39 PM /System/Library/CoreServices/backupd[2141] Disk image /Volumes/Sina's Time Capsule/Sina’s MacBook_0017f2347181.sparsebundle mounted at: /Volumes/Backup of Sina’s MacBook
    4/6/09 2:31:39 PM /System/Library/CoreServices/backupd[2141] Backing up to: /Volumes/Backup of Sina’s MacBook/Backups.backupdb
    4/6/09 2:39:45 PM /System/Library/CoreServices/backupd[2141] No pre-backup thinning needed: 862.6 MB requested (including padding), 205.56 GB available
    4/6/09 2:46:52 PM /System/Library/CoreServices/backupd[2141] Bulk setting Spotlight attributes failed.
    4/6/09 2:48:07 PM /System/Library/CoreServices/backupd[2141] Unable to rebuild path cache for source item. Partial source path:
    4/6/09 2:48:07 PM /System/Library/CoreServices/backupd[2141] Unable to rebuild path cache for source item. Partial source path:
    4/6/09 2:48:07 PM /System/Library/CoreServices/backupd[2141] Unable to rebuild path cache for source item. Partial source path:
    4/6/09 2:50:06 PM /System/Library/CoreServices/backupd[2141] Unable to rebuild path cache for source item. Partial source path:
    4/6/09 2:50:06 PM /System/Library/CoreServices/backupd[2141] Unable to rebuild path cache for source item. Partial source path:
    4/6/09 2:57:21 PM /System/Library/CoreServices/backupd[2141] Bulk setting Spotlight attributes failed.
    4/6/09 3:03:57 PM /System/Library/CoreServices/backupd[2141] Unable to rebuild path cache for source item. Partial source path:
    4/6/09 3:03:58 PM /System/Library/CoreServices/backupd[2141] Unable to rebuild path cache for source item. Partial source path:
    4/6/09 3:03:58 PM /System/Library/CoreServices/backupd[2141] Unable to rebuild path cache for source item. Partial source path:
    4/6/09 3:12:55 PM /System/Library/CoreServices/backupd[2141] Copied 29426 files (162.6 MB) from volume Macintosh Disk.
    4/6/09 3:17:36 PM /System/Library/CoreServices/backupd[2141] No pre-backup thinning needed: 678.9 MB requested (including padding), 205.56 GB available
    4/6/09 3:37:18 PM /System/Library/CoreServices/backupd[2141] Bulk setting Spotlight attributes failed.
    4/6/09 3:37:57 PM /System/Library/CoreServices/backupd[2141] Copied 2362 files (100.3 MB) from volume Macintosh Disk.
    4/6/09 3:42:00 PM /System/Library/CoreServices/backupd[2141] Starting post-backup thinning

  • Firmware takes too much space any way to reduce it?

    when i updated the firmware i noticed i had less Mb in the 515 player is there any updated firmware that takes less space?
    why is there only 241Mb free if its a 256Mb storage thing? Tnx in advanced for ur answer

    I have never used any of MSI's MP3 players, but do they show up in my computer? If they do right click on the drive and go to properties. Down at the bottom it will show the capacity. As an example my 128MB USB flash drive show 130,019,328 bytes, but that equals 123MB. What does yours show?
    Also without any music on there how much space is used according to the property page?
    Good Luck
    Jeremy

  • Printing takes too much space!

    Hi,
    I need to print a JTable's contents. This JTable has about 10 columns and about 500 rows. I print the column header in each page, and as many rows fits in a page until it is done. I separate each row with a line.
    Now, this takes about 10 MB in the Windows spooler, which also make the printing slow too.
    How can I do to reduce the quantity of memory it takes to print?
    Thanks in advance,
    Gabriel

    In general, in JDK 1.2 printer engine not compare to speed even with JDK 1.1 - all fonts are conwerted into shapes (maybe this is not true for jdk1.3+ for some set of fonts - but by sources of JDK1.2 this is it) this aproach caused even moderate amount of text, produce huge amount of shapes. So, if performance is the key for you application - try to play with rasterisation options or take look at non standart printing engines and on JDK 1.4 it is still beta but printing systeme take serious step ahead.
    If you dont statisfy java printing at all - try to extend com.sun.awt.windows.WPrinterJob - this is not violate any Sun's right but strongly not recomended.

  • Ipad backup use too much space

    Hi All.
    I have an iPad mini 3 128gb and I´m using near 35 gb of the device. I recentlyy create a backup up with itunes as always, but I realized that the copy is using 240gb of my hard drive. how this is posible? can I decrease the size of the copy?
    Regards.

    Hi All.
    I have an iPad mini 3 128gb and I´m using near 35 gb of the device. I recentlyy create a backup up with itunes as always, but I realized that the copy is using 240gb of my hard drive. how this is posible? can I decrease the size of the copy?
    Regards.

  • Ipad 3th gen photo sync problem take too much space / wrong color

    I am so happy after i got my 3th gen ipad i start sync 7k+ photo off my computer here problem i got and play phone tag with techsupport until now i still have this problems i wonder if anyone counter those and got tip to solve it.
    1. photo size in computer and ipad not match.
    my computer show 5 photo take 6mg
    i try a lot photo show in computer 386mg show in itune capacity 14.5gb i check in ipad do some + n - it take around 6.6gb
    i resize photo to so small it come out same problem
    2. photo color show not correct.
    most of my photo sync to my ipad show in green or purple color.
    I find out that any photo not in sRGB and do not have iccc color problem will have this problem i can be fix by convert it to sRGB and add iccc profile but it should not be this way ..
    the problem just with photo app that come with ipad, i test with adobe photo express it does the same problem color go all jack up.
    as now big big problem is can't seem to get photo sync correctly without 1 problem or other .. with 32Gb hdd i can't even get all photo that show 15gb in pc
    system
    win 7 home 64bit with latest itune 64bit
    ipad 3th gen 32gb with at&t 4glte

    I'm running iOS 5.1 on my iPhone4 and my new iPad3. But I never saw this color effect on my iPhone3G or iPod2G as well. I did sync some slideshows as well, but that is done on a Mac, not a Windows PC.
    What are the settings on your camera when you shoot the photos? Is the sRGB profile embedded by the camera? Any RAW formated pictures involved?

  • Bookmark toolbar takes too muck space

    Here is screenshot demonstraiting the problem:
    [http://wstaw.org/m/2012/07/17/snapshot2.png Screenshot]
    Main Toolbar is disabled
    Bookmark toolbar contains a few folders and located at the top row along with the navigation buttons and page tabs.
    The problem is bookmark panel takes too much space (it is too width) - lots of free space is unused.

    It never occurred to me to put the bookmarks on the tab bar. They don't seem to auto-size correctly there. (On other bars, you can re-fit the bookmarks using: View > Toolbars > Customize ''or'' right-click blank area of tab bar or navigation toolbar > Customize, then just clicking Done.)
    There are some methods for applying style rules to the Firefox UI that might help in this case. For example, you might be able to specify a maximum width for the bookmarks part of the bar. For example:
    <br>#TabsToolbar #personal-bookmarks, #TabsToolbar #PlacesToolbar {max-width:350px !important;}
    To apply such a rule, you can use the Stylish extension or the userChrome.css file (as described in other threads, but I'm short of time to search them up at the moment).

  • I was copying files to my time capsule when it crashed when it was almost finished. Now I am stuck with a light grey folder I can not delete. I would´t care if it wasn´t for the fact the folder is 1 TB size and takes up too much space. I ha

    I was copying files to my time capsule when it crashed when it was almost finished. Now I am stuck with a light grey folder I can not delete. I would´t care if it wasn´t for the fact the folder is 1 TB size and takes up too much space. I have tried turning on and of Hiding Files in Finder and what not with no success. So, how do I delete this folder. Remember, I am not extremely familiar with technical terms.

    I recommend you erase the TC.. it is the easiest and fastest solution.
    In Airport utility open the disk tab and select erase.. choose quick erase.. it will take less than 1min.
    Start again but copy files in small amounts.

  • Bookmark Toolbar bookmarks have icons & take up too much space.

    Firefox 4 beta 3 added icons to the Bookmark Toolbar, i.e. folder icons next to folder drop-downs, and mini-icons for links. While they're pretty, they take up too much space. Beta 2 didn't look like this.
    How can I get rid of them?

    Not on OS X.<br />
    It is probably the first Firefox version that will have icons on the Bookmarks Toolbar if you get them by default.<br />
    In previous Firefox versions you need a special theme or code in userChrome to accomplish that.<br />
    Now you will need code in userChrome.css if you want to suppress those icons.
    Add code to [http://kb.mozillazine.org/UserChrome.css|userChrome.css] below the @namespace line.<br />
    See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files<br />
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    #personal-bookmarks .toolbarbutton-icon {
    display:none !important;
    </nowiki></pre>

  • How do I remove the Icons next to each bookmark on the bookmark toolbar? They take up too much space and all the bookmarks I need on the toolbar dont show up.

    On my bookmarks toolbar, each bookmark has the associated webpage icon next to it. I would like to remove those icons, as they take up too much space.
    Thanks

    The icons, if you are familiar with them or they are obvious, take up less space than the words. You can abbreviate the names down to next to nothing or even nothing.
    To save space and help organization you can group bookmarks into folders on your Bookmarks toolbar.

  • HT1386 How can you stop the iPod from syncing photos ot it?  It takes up too much space!!!!!

    I just got an iPod and am setting things up, but I don't want it to sync my photos from my computer to the iPod as it takes up too much space.  How do I stop it from syncing the photos?

    See here: iOS and iPod: Syncing photos using iTunes
    B-rock

  • Upgraded to iPhoto '11, info tray takes up too much space?

    Is there a way of resizing or moving the info tray from the side of screen to the bottom like '09 version?
    Mostly interested in minimal view to see date, size of photo taken. Screen size on 13.3" so info bar takes up too much space.

    No.  That feature is hard coded into the app.  Send a feature request to Apple via http://www.apple.com/feedback/iphoto.html.  The Command+i key combination can quickly open and close the Info tray to get it out of your way.
    OT

  • HT1473 I have a whole bunch of CDs that I would like to import into iTunes. However, I'd like for them to be stored "in the Cloud" as opposed to on my PC, which would simply take up too much space. How would I go about doing this? Thanks so much

    I have a whole bunch of CDs that I would like to import into iTunes. If I do that, would the songs still reside on my PC (which would take up too much space), or is there a way to get them "into the Cloud"? Thanks so much

    Sign up to iTunes Match, though I'd consider investing in more storage. If space is a problem now then you're probably not backing up your existing media and content, which you should most certainly do.
    tt2

  • I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?

    I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?

    Purchase and use Paragon Camp Tune

  • The iCloud Drive folder in Library/Mobile Documents is taking up way too much space on my startup disk.

    The iCloud Drive folder in Library/Mobile Documents is taking up way too much space on my startup disk
    I was hoping my files would stay in the cloud and not take up a ton of space on my machine (only a 128gb SSD).  But while performing an overnight time machine backup I came back to find a "Startup Disk Full" error message.  I only have about 20gb used locally but over 200gb in iCloud Drive at the moment.
    Is there a way to clear the cache so my files stay on iCloud and not hogging space on my SSD? Or a way to redirect this library to my 2nd hard drive?
    I'm using a 15" mid-2012 Macbook Pro with a 1TB hard drive and I've replaced the optical drive with a 128gb SSD for my OS (which is where my library is, hence the difficulty).
    Thank you!

    While puttering around after posting this I think I found my personal solution here: http://macs.about.com/od/diyguidesprojects/qt/Move-Your-Home-Folder-To-A-New-Loc ation.htm
    I'm just going to move my home folder to my 2nd internal 1TB hard drive to solve my problem.
    But my question remains, how can we minimize the amount of local space iCloud Drive ***** up?  I wanted to get the rumored new macbook air that might come out next year but this is a big turn off if iCloud drive is going to overwhelm the SSD in the AIr.

Maybe you are looking for

  • Set filter for only one column in tableview

    Hi i am using in MVC a htmlb:tableview with filter in only one column of 8. This is all working fine, except that the user can enter a searchsting in the filterfield for all columns, but in handle_event (of the controller) ; i only react to a text in

  • ESS - Define Rules

    Hi everyone, In the "Define Rule for Object Selection" via SPRO we have created a custom rule Z_ESS_LEA_RULE5 which is based on the evaluation path O-S-P. This brings back a list of employees for a particular Org. Unit. This is working perfectly. How

  • Archive files for database are generating very quickly

    I could see that the archive files for my database are generating very quickly (i.e for every 2 minutes) which fast and filling up my archive file location mount point. How to troubleshoot the issue? Thanks, Sunil.

  • Dollar($) in tag name

    Hi, i am getting all the table names from the database and i want to create a new XML document from the result set, without using oracle's methods. when i create a new element for each table name if the table name includes the dollar($), the "Invalid

  • I have iTunes account/iPhone, now sync/Mac did't recognize  previous ID No.

    I have opened my iTunes account when bought iPhone.  When I tried to sync the iPhone with the Mac to download info. did not recognize my previous ID. I have to create a new ID and enter a new credit account. Now, I am trying to update the iTunes prev