TM backups not appearing after partition size changeo

Hello there,
So some weird stuff's been happening to my 2013 27" iMac lately, running Yosemite. First of all, my internal HDD died, fortunately my entire system was on an external SSD. I've done TM backups of this drive frequently to another external HDD, which contained my music project files too. Than my mac just started turning off at boot. Thought it was hardware fail, but the recovery mode worked, so I've booted up "restore from TM backup". Everything was fine, all my backups were there up to that day. I've tried restoring to the SSD but than I've figured out that the SSD was the problem, so the backup stopped everytime I've tried at around 5-6%. Okay than, new SSD bought today, my only option was to boot recovery from internet, install mountain lion. Did that, but before restoring everything from TM in recovery mode, I've thought that maybe I should create a separate partition for my TM backups, as I have some other stuff too on that drive, so I resized around 200 gigs from my TM backup HDD for the later backups. After that, the TM backup in recovery mode only shows one backup (back from 2014 January). Any other backups are gone (which were shown before the HDD resizing). Although everything is in the same place, in Finder I can see all my backups in the backup folder, however I cant restore them from recovery. If I open TM in OSX, I can actually travel back and see all my backups, but restoring from here is not working because I want to restore all my system files as well, and under OSX It cant be done (files in use, it says). Migration only restores my apps and docs, but not my system files (application support, plugins, etc.) which is the most important thing for me right now, as I dont want to reinstall and setup every vsti and au I used before. I've installed a clean Yosemite and tried than, but still only shows the 2014 Jan backup. I've tried repairing the TM backup disk but it says there are no problems with it. I also did size it back to its full size as it was before, doesn't work either.
Hope there is some workaround or solutuon, thanks for the help in advance!
cheers

Rob Reuland wrote:
After a clean install of Snow Leopard I wanted to migrate a user folder from a TM backup on separate partition of the boot disk. I tried using Migration Assistant but the TM backup disk was not recognized. I repaired the disk using Disk Utility (took forever but no problems) and tried again. No luck. So I opted for a full restore using the SL install disk, intending to start over. But after booting from the install disk and trying to use Restore from Backup failed. It recognized the backup partition but failed to identify any backups on it.
Any ideas?
Try the procedure in #E2 of Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum). Does that show the backups?

Similar Messages

HT1386 My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?

Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???

Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me.

E-Rec Reference Code in the Publication tab should not appear after enddate

hi,
There is a requirement from the client after the end date of the publication ,the reference code should not be displayed to the candidate in the Candidate page ,presently the same is manually done in the system by changing the status to withdrawn.
Is there any way by which we can automate the process by change in customising by which the reference code does not appear after the end date
Please provide a solution if something can be done in the standard setting or do we require any Zworkflow to be developed for the same.
Regards
RK

Hi RK,
this is nothing the standard supports.
But I would not use a workflow here. As this is a mass handling workflow is no good idea. This is a task for a customer periodical service. Just build a class implementing the periodical service interface which gets all released publications which have a publication end in the past and status released and change their status using the cl_hrrcf_posting_inst_bl. This should be done in a couple of hours. Add the customizing and the issue is solved.
A requirement in this context where a customer workflow is quite handy in my opinion is a customer workflow which closes all postings and withdraws released publications when you close the requisition. This reduces the steps a recruiter has to do and ensures that no candidate applies although you are already done with the requisition.
Kind Regards
Roman

Why MLB.TV is not appearing after the last update?

why MLB.TV is not appearing after the last update?

Make sure the store is set to the US.. Also restart the ATV.

Why is Time machine backup not working after Mavericks upgrade?

Why is Time machine backup not working after Mavericks upgrade?

I had the same problem due to the Fire Wire port. Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device. I find it strange that as soon as I installed Mavericks. The drive does work using USB. It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

Why new contacts are not appearing after some time?

I Am using iPhone6, iPad New and iPad mini. The contacts which I saved in iPhone are not appearing after some time. I don't know whether it is related with synchronisation of other devices. Please help me if you know the reason.

Hi,
Have you checked the filtering option in contacts? Open contact menu button > filter. Perhaps you have a filter hiding the contacts.
What are your thoughts about this forum? Let us know by doing this short survey.

The Facebook video chat icon is not appear after upgrading to mavericks X

The Facebook video chat icon is not appear after upgrading to mavericks X. Please help.

http://support.apple.com/kb/ht5404
Scroll down to the bottom, read and then perform the troubleshooting steps provided.

CRT results are not appearing after successful payroll run

CRT results are not appearing after successful run of US payroll, however, RT results are appearing.
Please suggest ideas to find the results of CRT.

Hi Rémi Corriveau,
Thank you for spending your time to answer my question.
Here are the answers to your questions . . . .
QUESTION: Did you run a Payroll Simulation or a live Payroll Calculation ?
ANSWER: We did a LIVE payroll run for a period of 3 months.
QUESTION: Did you use t-code pc_payresults ?
ANSWER: Yes, we used the t-code pc_payresults but still it doesn't show the CRT results.
QUESTION: Did you check Processing Class 30 and 70 for your WTs ?
ANSWER: As per the process, we copied the SAP standard (model) Wage Type M010 to
our customized Wage Type, hence, hope that it wouldn't disturb any of the standard SAP settings.
However, we did check the Processing Class 30, but did not check the processing class 70.
Shall update you once PC 70 is also checked.
Please educate, if there are any particular specifications that need to be entered while checking
for our WTs in PC 30 & PC 70.

Simple floating clock does not appear after shut down

Hi,
On my iMac oxs 10.9.4. my simple floating clock does not appear after shut down.
Can anybody tell me how to overcome this?
Cheers

And now I am at the stage it wont automatically start despite it being ticked in the Log In Items.
As Imp68 has asked, do you mean the "Hide" Checkbox is selected?
If you have checked the box, that says, to start the application, however, hide it so it is not visible when you start.
If you run Applications -> Utilities -> Activity Monitor, can you find Simple Floating Clock as a running app? (Activity Monitor has a Search box to make this easier).
Is Simple Floating Clock on your Menu bar?
Is Simple Floating Clock set to float?

SHCess field not appearing after using utilization tab in excise invoice

Dear All,
SHCess field not appearing after using utilization tab in excise invoice.The other fields and values releated to SHCess are appearing.
Please give the inputs.
Regards,
deepti

issue resolved

Hyperlinks not appearing after publishing

Hello everyone,
I'm hoping someone out there can help me out. I'm working
with RoboHelp 5.0.2 and i'm working off my C drive. In our project
i'm working on, i've created hyperlinks to other HTM pages within
the project. The links work fine in the preview but as soon as i
publish the project the hyperlinks do not appear. I've removed the
link in the project and re-added the links and they still will not
appear. Is it possible RH doesn't like to use long file names in
the path? This is happening on several pages. Any help would be
greatly appreciated.
Thanks,

Hello Peter,
Thanks for replying. The text is still there but it's not
formatted as a hyperlink. It's a few links that do not work. On
some of the other topic pages the same links work and on others
they don't. After it the project is published this is what it looks
like through View Source.
<tr valign="top" class="whs18">
<td onMouseOver="this.bgColor='rgb(185, 211, 238)'"
onMouseOut="this.bgColor='rgb(255, 255, 255)'" ;"width:
85.107%; padding-right: 10px; padding-left: border-left-style:
Solid ; border-left-color:
#7d7d7d; border-right-style: border-right-color:
border-bottom-style: border-bottom-color: border-bottom-width: 1px;
border-right-width: border-left-width: 1px;"
width="79.253%" class="whs28">
<p class="whs26"><a href>Disbursements,
Holds, Refunds and
Withdrawals</a></td></tr>
This is what it's suppose to look like through True Code in
RoboHelp
<tr style="x-cell-content-align: top;"
valign=top>
<td_null>
<td onMouseOver="this.bgColor='rgb(185, 211, 238)'"
onMouseOut="this.bgColor='rgb(255, 255, 255)'"
;"width:
85.107%;
padding-right:
10px;
padding-left:
border-left-style:
Solid;
border-left-color:
#7d7d7d;
border-right-style:
border-right-color:
border-bottom-style:
border-bottom-color:
border-bottom-width:
1px;
border-right-width:
border-left-width:
1px;"
style="width: 79.253%;
padding-right: 10px;
padding-left: 10px;
border-right-style: none;
border-bottom-style: dashed;
border-bottom-width: 1px;"
width=79.253%>
<p style="color: #959595; font-size: 8pt;"><a
href="../../Disbursements_Holds_Refunds_and_Withdrawals/DeVry_Call_Center_Disbursements_H olds_Refunds_and_Withdrawals.htm">Disbursements,
Holds, Refunds and
Withdrawals</a></td></tr>
If i open up the published HTM and paste
<a
href="../../Disbursements_Holds_Refunds_and_Withdrawals/DeVry_Call_Center_Disbursements_H olds_Refunds_and_Withdrawals.htm">Disbursements,
Holds, Refunds and Withdrawals</a>
the code into the HTM and save it, it works; however when the
project is published again RoboHelp will overwrite the HTM and the
hyperlink will disappear.

The music search on the I tunes store does not appear after the latest upgrade to my I phone 4

The music search feature on the I Tunes store does not appear. Unable to search since the latest upgrade.

If you're sure where your library is run this script iTunesXMLPath. The library folder is the folder that file is in. Your media folder is recorded under Edit > Preferences > Advanced and is usually a subfolder of the library folder.
I recommend you backup your library with the method in this user tip.
tt2

Crystal Report Viewer is not appearing after hosting on server

Dear Friends
I developed a web application in Visual Studio 2010, and my Database is SQL Server 2008 R2.
I created reports using Crystal Report 13 in Visual Studio and my Operating System is Windows 7 32-Bit.
All reports are running fine at my machine.
When I copied published folder into "wwwroot" folder and hosted, all reports are working Good.
Here i have my web application in "Default Web Sites" in IIS.
Then After I added a new website in IIS with a port No. and created a virtual folder and hosted my web application.
The application is running fine, But the problem is Reports are not appearing on Web Page.
I have created an toolbar to export the report. And when I am exporting the report to PDF, It is working well and reports are exported successfully.
I didn't understand why this is happening?
Is this a problem of port no. ?
or
Is this a problem of IIS?
or
Is this a problem of Browser?
or
Is this a problem with CrystalReportViewer?
or
something else?
In fact I have the folder for "C:\inetpub\wwwroot\aspnet_client\system_web\4_0_30319\crystalreportviewers13". for crystal reports.
Dear All kindly help me in this issue, it is disturbing me since 5 days.
All helps are appreciable.
Thank you.

Enter the following:
viewer blank net crystal
into the search box in the top right corner. You should get a number of hits (Kbases and articles) that should point you to a solution.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Contact name does not appear after upgrading to iOS 5

I recently upgraded to iOS 5 and after doing so, contact name does not appear when someone calls; but text messages the name appears. I have saved all my contacts under +9 format.

This indicates that the phone was carrier locked and had been 'hacked' to unlock it. Updating the phone has re-locked it to the original carrier.
ONLY the carrier it is locked to can authorize unlocking it. Not all do so. Contact the carrier and find out what their policy is.
If it's locked to AT&T, you may as well sell it and buy a new phone. AT&T will not unlock iPhones for any reason.

After installing Adobe Version X Pro, I still cannot "create" a PDF package from Excel since the Adobe add-in does not appear after installation. Can someone provide their inputs?

I'm having issues with getting the Adobe add-in to appear after installing Adobe Version X. Version XI works but it is not compatible with another software my company uses so we have to stick with Version X. Please help.

Make sure your Acrobat X is up to date. 10.0 will not do this, 10.1 is supposed to. Compatible web browsers and PDFMaker applications

TM backups not appearing after partition size changeo

Similar Messages

Maybe you are looking for