TM saves the same (never changed) files again and again

Hello,
I just had a look at my log, I found two problems: error 43, which I solved by changing TM disk and coming back to the original one, and something odd: it seems for the past two days TM has been saving again and again 12 files - size unchanged - from a disk containing nothing but old stuff I never ever touch.
Jun 10 10:47:01 myMacPro /System/Library/CoreServices/backupd[75795]: Copied 12 files (25 KB) from volume XYZ.
I get a bad feeling about this - any clues?
many many thanks!
T

Hi,
that's because you are installing over an historical timeline. Updates that you have not yet installed may have back dependencies to updates that you have removed from the update logs.
Most updates from Win7 RTM will require the PC to be rebooted. Win7 SP1. You should not delete your Update History between reboots.
If you require to run Diskcleanup in order to recover space from your c drive, then you have partitioned your c drive too small (100 Gb min). Go back to re-installing the OS or better from a backup or use the System Control panel to increase your c drive's
allocated storage.
Questions regarding Internet Explorer 8, 9 and 10 and Internet Explorer 11 for the IT Pro Audience. Topics covered are: Installation, Deployment, Configuration, Security, Group Policy, Management questions. If you are a consumer looking for answers or to
raise a question, it's highly recommended you head on over to http://answers.microsoft.com/en-us
Regards.
Rob^_^

Similar Messages

Keeps asking to open/save the same Adobe Reader X installer file everytime at startup

Tried to update Reader X after Plug-in checker found installed version out of date. Encountered "Download Configuration Failed" error after downloading and executing installer (turns out effing Adobe has known about this problem since mid July but has chosen to continue with providing this installer on their download site). Following Adobe Support instructions, uninstalled Reader and tried again but without success. Finally found another link on Adobe Support for another installer which worked.
However, now when I start up Firefox, a pop-up will appear saying that "You have chosen to open "install_reader10_en_air_mssd_aih.exe" ... would you like to save this file?" (the same bad installer file) even though I have saved it a few times already to try to get rid of the pop-up. This happens at EVERY start-up.

Try using a different web browser. I was having this same problem when I was using Firefox, but then tried it in Opera and it worked like it was supposed to. I guess Adobe was in too much of a rush to release another product that they neglected to make sure it worked...They would get an 'F' in a software engineering course.

Can someone plz confirm me that how i can change or update the security questions related to my apple id? as i have been never put them since i create my apple id but now due to some security reasons its asking me again and again the answers. i am unable

can someone plz confirm me that how i can change or update the security questions related to my apple id? as i have been never put them since i create my apple id but now due to some security reasons its asking me again and again the answers. i am unable to go through the process. thanks.

Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

In iphoto, how do i save a photo after editing, in the same or higher file size, it's saves in a lower size

in iphoto, how do i save a photo after editing, in the same or higher file size, it's saves in a lower size

It's rather more complicated that this.
iPhoto is a lossless editor. You don't lose any quality on your shot in iPhoto.
The file size you see reported is the size of your iPhoto Preview: this is what gets used if you access the data via a media browser. It's a "good-enough-for-most-uses" version of the shot. Email it, upload to websites, use it in Presentation, Word processing file etc
If you want to set the quality yourself then Export the photo using the File -> Export command.
You can choose to export to Jpeg, Tiff or png. Tiff is lossless but the file sizes are up to 10 times larger. Jpeg allows you to choose different qualities: High, Medium or low. The difference is the amount of compression involved. High quality means very little compression. It's not unusual for photos exported at this setting to have a larger file size than the original.
Which setting you choose depends on the use you intend. Further editing, printing then high is important. Sending to Facebook? Well low will do just fine there as they're going to trash the file anyway.
But the key point: the file size only becomes an issue when you export.
Regards
TD

Dear All, today i am trying to generate a chm in Robohelp 11, by combining two topics under a single book but again and again i am facing same issue that is "Cannot open the file: mk:@MSITStore: C:\\Users\..\Desktop\filename.chm"

Dear All, today i am trying to generate a chm in Robohelp 11, by combining two topics under a single book but again and again i am facing same issue that is "Cannot open the file: mk:@MSITStore: C:\\Users\..\Desktop\filename.chm"
Amy_WongWoojinDebbieclawsonmghalpinjwarrenJochem van DietenLee Design
Please help me in solving the same

HI,
Thanks for the response.
I am really tensed for the same...
Actually the error occurs in the following case:
1. I am creating a Parent folder in robohelp with the name ABC..
2. Next Under ABC i have created 2 separate folders say XYZ and EFG.
3. Under XYZ i have created various Topics say 2 or 3.
4. Under EFG i have created various Topics say 7 or 8.
5. Now, i have created a TOC with name for ABC (Parent Folder.)
6. Next i have dragged and dropped my two sub folders that i have created under ABC in Project Set up wizard that is XYZ and EFG, in order to generate the webhelp first and then the CHM file fo rthe same.
7. Webhelp is successfully getting generated.
8. But when i convert the Webhelp to CHM Converter, after few seconds the robohelp gets halt and it shuts up the robohelp, showing a message dialog box that the Adobe Robohelp 11 is Troubleshooting for the error, the Windows manager will get back to you..Someting like this, the .CHM file for the same gets generated on the described path, but when i click on it, it does not open and shows the error as "Cannot open file: mk:@MSITStore: C:\\Users\..\Desktop\filename.chm".
Please help me in sorting the above issue.
According to me:
I think i am Lacking in the two things:
1. How to link all the topics with the parent folder.
2. How to Merge the projects.
Can you please provide me the link where i can get tutorial to create a TOC for multiple files in a same TOC and to generate a chm for them.
Actually for single project folder i have worked successfully. But, its first time i have to create a chm with lot many sub folders in it, as like one create a book.
Please help
Thanks & Regards,
dhm

Truly dumb question. How do I get PS to actually complete a command, eg straighten an horizon, and finalise the change. Even doing a "save as" with a new file name and reloading brings the image back, straightened, but with the skewed back ground frame st

Truly dumb question. How do I get PS to actually complete a command, eg straighten an horizon, and finalise the change. Even doing a "save as" with a new file name and reloading brings the image back, straightened, but with the skewed back ground frame still there. Is there a "apply change" or similiar command that I simply cannot see.

brings the image back, straightened, but with the skewed back ground frame
PSE did what you told it to do. Choose the Straighten and crop edges or fill edges options when you use the straighten tool if you want it to do more than just straighten the contents of the image. Many people prefer the plain straighten because they'd rather crop themselves than let PSE do it.

I have just updated to the new version of Firefox. Eventhough, i have reboated my computor, Firfox prompts to do it again and again and would not open. The same things happen if i try to unistall it or redownload it. What can I do?

Question
I have just updated to the new version of Firefox. Eventhough, i have reboated my computor, Firfox prompts to do it again and again and would not open. The same things happen if i try to unistall it or redownload it. What can I do? edit

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

HT1751 Few days back i bought 8 ringtones from my iphone application for itunes and when yesterday I sync it with itunes all my ringtones washed off. I tried to again download the same ringtones from itunes then it again asked for payment. Why?

Few days back i bought 8 ringtones from my iphone application for itunes and when yesterday I sync it with itunes all my ringtones washed off. I tried to again download the same ringtones from itunes then it again asked for payment. Why?

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

How can I change fullscreen background color, so that it is the same when viewing on mac and iPad? I want this to be able to use MathType in widget text.

How can I change fullscreen background color, so that it is the same when viewing on mac and iPad? I want this to be able to use MathType in widget text.
As an example, html widget has white background on iPad, and black on mac. The same goes for interactive widget.
The MathType text inserted is inserted as a image, and will have the same color when in fullscreen as when not. So I need the textcolor to be the same in both views. Anyone know how to fix this?

We're still not communicating. This is why I wanted an example .iba.
Here's a re-creation of my own, going off what you described. You said "all html widgets and all gallery widgets" have this problem. So I inserted a blank HTML widget and a blank Gallery widget, and typed into both. Inserted a MathType equation into both. I don't see any difference when I preview it on my Mac compared to the preview on the iPad. I want to help, but I can't help if I can't duplicate the issue.
I've attached the screen shots and the .iba file [link to .iba file].
Feel free to email me directly at bobm at dessci dot com. If you're uncomfortable giving some information here, tell me anything you want in email. I work for the "MathType company", Design Science.

How to save the contents of a file(not a text file)

Hi all, I want to save the contents of a file(,png file, not a text file) as a field in a class. Shall I have it as a string or byte array or something?
I have tried saving a file in a string but there were some problems with loading the file from a different platform. Following is my code.
        String string;
        try {
            StringBuffer sb = new StringBuffer(1024);
            char[] characterArray = new char[1024];
            BufferedReader br = new BufferedReader(new FileReader(file));
            while(br.read(characterArray) != -1){
                sb.append(String.valueOf(characterArray));
            br.close();
            string= sb.toString();
        } catch (IOException ex) {
            ex.printStackTrace();
        }and I use the following code to recover the string back to a stream, and save that stream back to a time later.
    ByteArrayInputStream bais = new ByteArrayInputStream(map.getBytes());I realized that because this file is not a text file, the string could cause some problems. But anyone could tell me if I should use a byte array or someting? and how?
Any help would be appreciated!
Cheers,
Jing

You should use a byte array, and the binary streams (InputStream a& OutputStream). Never use Strings and Reader/Writer if you have binary data.
Kaj

Communication between thread in the same process using file interface.

Hi,
I am developing driver and i need to communicate between two thread.
>can anyone guide me on implementing communication between two thread in the same process using File Interface. First thread will be driver and second will be application.I need to send IOCTL like commands using File interface ie is WriteFile(),ReadFile()
from Host process to driver through file-interface(which run's in driver context).Host process should not be blocked for the duration of the driver to process the command.
>File-interface will run in driver context and it will be responsible to receive command from application and pass it to the driver.
what are the complexity introduced?
>Can anyone also give me the link/reference to get more information on this topic?
>How to replace IOCTL command's for instance baud _rate change command with a file interface for example with IRP.

Here is the detailed query:
Hardware Abstraction Layer will interact with Driver(Both will be running in complete different process) .there is a IOCTL for command and File interface for read and write.
My requirement is:
Both should run in the same process so HAL will run as one thread and driver as another thread in the same process .I don't want HAL to wait for completion of request and also i don't want driver to be blocked .
We are planning to use a File Interface for communication between Hardware abstraction layer and Driver
HAL will send the command or read/write operation to a file interface and driver will get the command or read/write request from the File interface
There is a flexibility to change Hardware Abstraction layer and also the Driver
Is it possible to use IOCTL between two thread under same process? if not what other options do we have.
Can we use File interface to send command (like IOCTL) between two thread?

[svn:osmf:] 16197: Config file changes to reflect the folder structure changes of libs and plugins

Revision: 16197
Revision: 16197
Author:   [email protected]
Date:     2010-05-18 15:07:01 -0700 (Tue, 18 May 2010)
Log Message:
Config file changes to reflect the folder structure changes of libs and plugins
Modified Paths:
    osmf/trunk/apps/samples/framework/DynamicStreamingSample/DynamicStreamingSample-build-con fig.xml
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/AkamaiPluginSample-build-config.xml
    osmf/trunk/framework/OSMFAIRTest/OSMFAIRTest-build-config.xml
    osmf/trunk/framework/OSMFIntegrationTest/osmfintegrationtest-build-config.xml
    osmf/trunk/framework/OSMFTest/OSMFTest.mxml
    osmf/trunk/framework/OSMFTest/osmftest-build-config.flex
    osmf/trunk/framework/OSMFTest/osmftest-build-config.flexcov
    osmf/trunk/framework/OSMFTest/osmftest-build-config.xml

Grant,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

I'm editing in FCS 5.1, but when I try to save the project, it says "File error: file unknown." Any advice? Thanks!

I'm editing in FCS 5.1, but when I try to save the project, it says "File error: file unknown." Any advice? Thanks!

have you tried doing a save as to a different location? If that doesn't work, do a search here. I seem to remember people having the same problem.
You could also try doing an xml export (I think 5.1 has that capability).

Is Time Stretch the same as changing duration in Comp settings?

I need to extend a comp in my timeline. Is Time Stretch the same as changing the duration in my comp settings? Is there a drawback or benefit to either?

As long as we are merely talking stretching out the keyframes there is no difference. Of course dealing with video files inside the pre-comp is a different matter...
Mylenium

Executing the sam SQL Query again and again on the same records?

Hi currently we have a system that will compute certain charge information base on a file finance department send to us from another system
The problem is that their file contains of Account with bank records and account with no bank records.
for thos account with bank records it will just send to us and we will just update it..and those account will be updated...
but for those account that have no bank records ..it will send to us again and again..and these no bank records account will accumulate
the finance department mention that there is not much they can do on their side except sending us the file
is there any gd solution for this people kind to share?

Well one simple solution which i can think of is to persist Non-bank accounts in a Serializable Object and save it in a temporary cache.
Now before running a query on them and then trying to update the database checkout the peristed cache, check whether data records exist their or not
if they do, dont update that records in the database.
or define your database tables in such a way that there is an indication of abt bank & non-bak records and write a query / procedure in such a way that it do not update the duplicate non-bank records.
Hope this might help :)
REGARDS,
RaHuL

TM saves the same (never changed) files again and again

Similar Messages

Maybe you are looking for