TM2-1100: Unable to set default rotation for slate/tablet mode

I have a brand new TM2 Tablet (2nd Generation).
When I put the screen into tablet/slate mode the display DOES automatically rotate, but it rotates 180 degrees, landscape rather than potrait.
I can press the bezel rotate button 4 times to eventually get it to the proper potrait orientation, but I have owned several other tablets and never had to do this... They always either rotated to portrait (90 or 270 degrees) automatically or allowed me to set how it would rotate when put in tablet/slate mode.
Googling this rotation issue found many similar complaints, even by major industry reviews of the TM2. Some people on the 1st generation TM2 were able to correct this by installing older HP Quick Launch Button software and changing the registery settings, but the second generation TM2 does not use that HP Quick Launch Button software.
I called HP and they basically said it was working as designed.
Has anyone found a solution to this? Granted, it's not a show-stopper but it is very annoying and it is basic tablet functionality that should work.
Thanks.

Same problem on my TM2-2150. not even 2 months old and already things are quitting.
The workaround I did that makes me less unhappy is as follows.
1. Check the intel video drivers for the screen orrientation hot-keys. Mine are Ctrl-Alt-Arrow (direct to top of screen)
2. Enable Penflicks in all directions
3. Pick the screen orientation you want to use in tablet mode. ( Mine turns the screen clockwise)
4. Change one of the directional pen-flicks to a custom key command coresponding to the keyboard shortcut to change screen orientation.
5. Change the directional 90 degrees away (anti-clockwise in my case) to the key command to revert the screen back.
now the direction you picked on the screen toggles the orientation of the screen between landscape and tablet mode. It's not ideal, but it is workable.

Similar Messages

Unable to set default program for .pdf

CURRENT PROBLEM:
As show in print screen, when i attempt to set default program nth happens at all. The only way i can open any .pdf file now is by 1st opening adobe reader 9 and select the .pdf file manually
INITIAL STAGE OF PROBLEM:
Problem started after upgrading to windows 7 from vista. Windows 7 is able to recognise adobe reader 8 as a valid default program since it is in windows.old. Thus the default for .pdf is adobe reader 8 (it was installed in vista).
Subsequently, installing adobe reader 9 isof no use as it will be ignored and windows 7 will only continue to use adobe reader 8 as the default reader when i try to open a .pdf file, unless if i manually opened adobe reader 9 and selected a .pdf file manaually
However, I am unable to uninstall adobe reader 8 as the "program and feature" can only identify adobe reader 9 and does not think that adobe reader 8 exists.
ATTEMPTs TO SOLVE:
Thus, I removed windows.old by using the disk cleanup. However, I am still unable to set adobe reader 9 as the default reader. Instead, .pdf are no longer accessible/"open-able" unless I 1st opened adobe reader 9 and then selected a .pdf manaually.
I've attempted reinstalling and restarting comps etc, they dun seem to help. I suspect the OS is now only able to recognise adobe reader 8 from windows.old as a valid program directory due to some registry issues since it was initally set as the default when i 1st upgraded the OS. Now that adobe reader 8 is removed, there might be some corrupted registry somewhere that needs to be set right again?
Really need help with this. Thanks a million.

Thanks guys for showing interest in helping.
As you guys can see, there's no adobe reader when u expand. Also, I already browsed the reader just in case too. Thus expanding doesnt help. =(
Also, I cant seem to find the "file type" tab in folder options

Unable to set default date for Date Picker item using Auto Row Processing

Okay, I have searched through the forum for an answer, and have not found a thing to account for my problem.
First, does anyone know if using Auto Row Processing has problems updating an item/field in a record where the Source is defined as Database Column if the 'Display As' is defined as 'Date Picker (MM/DD/YYYY)'?
I ask this only because I found out the hard way that Auto Row Processing does NOT fetch the value for an item where the field is defined as TIMESTAMP in the database.
My problem is as follows: I have a form that will CREATE a new record, allowing the user to select dates from Date Pickers, text from Select Lists, and entering in text into a Textarea item. The information is saved using a standard (created through the Auto Row Processing wizared) CREATE page level button. After the record is created the user is able to go into it and update the information. At that time, or later, they will click on one of two buttons, 'ACCEPT' or 'DECLINE'. These are Item level buttons, which set the REQUEST value to 'APPLY' (Accept) and 'UPDATE' (Decline). The Accept button executes a Process that changes the Status Code from 'Initiated' to 'Accepted', and sets the Declined_Accepted_Date to SYSDATE, then another Process SAVEs the record. The Declined button runs a Process that changes the Status Code from 'Initiated' to 'Declined', and sets the Declined_Accepted_Date to SYSDATE, then another Process SAVEs the record.
However, even though the Status Code field is updated in the database record in both Accepted and Declined processing, the Declined_Accepted_Date field remains NULL in the database record (by looking at the records via SQL Developer). WHY??? I looked at the Session State values for both the Status Code and the Declined_Accepted_Date fields and saw that the fields (items) had the expected values after the process that SAVEs the record.
The following is the code from the Accept button Page Process Source/Process:
BEGIN
:P205_STATUS_CD := 'A';
:P205_REF_DECLINE_ACCEPT_DT := SYSDATE;
END;
As can be seen, the Status Code and Declined_Accepted_Date items are set one right after the other.
As an aside, just what is the difference between Temporary Session State vs Permanent Session State? And what is the sequence of events to differentiate the two?

Here's yet another thing that I just looked into, further information...
One other difference between the date field I am having problems with (Accepted_Declined_Date), and other dates (with Date Pickers) in the record is that the Accepted_Declined_Date never gets displayed until after it is set with a default date when the Accept and Decline buttons are pressed.
One of the other dates that works, the Received Date, is able to write a default date to the record that is never typed into the box or selected from the calendar. That date is placed into the box via a Post Calculation Computation in the Source, which I set up as: NVL(:P205_REF_RECEIVED_DT,TO_CHAR(SYSDATE,'MM/DD/YYYY'))
However, I do remember actually trying this also with the Accepted_Declined_Date, and setting the Post Calculation Computation did not work for the Accept_Decline_Date. Could this be because the Accept_Decline_Date is never rendered until the Status Code is set to Declined (in other words, there is no need to display the date and allow the user to change it until the record is actually declined)???
The control of the displaying (rendering) of the date is set via the Conditions / Condition Type: Value of Item in Expression 1 = Expression 2
Expression 1 = P205_STATUS_CD and Expression 2 = L
Does this shed any light???

Setting Default Preferences for All Users in Crystal Reports Server 2008 v1

We are currently looking to set the default preferences in the CMC for all of our users.
I did locate this page Link: [How to set default preferences for all users in Infoview 3.1/CRS 2008]
The first part of the thread did seem promising but I am unable to find the sample .jsp code that people recommended.
I would assume that this scenario is common enough that someone knows a way to set universal preference defaults.
Thank you

I thought I could just run it too but when I attempt to I get a Windows Script Host error:
Script: C:\User Prefs.vbs
Line: 1
Char: 1
Error: Expected statement
Code: 800A0400
Source: Microsoft VBScript compilation error.
I noticed the first most line seems to be markup for a web interface though I am not familiar with vbs so I may be wrong. I used the publishing wizard to put the script on the CMC to attempt to run it through the CMC but it still does not work.

Unable to set default Model

Hi,
When i tried to set default Model for Web Input/Report forms i am unable to change the previous. Exp when i go and set A as my default model in features>context defaults it shows as default model ....... when i open input form it still has the model B.(i have also re-logged in to see the changes not shown though)
Please help
Thanks,
PR

Thanks guys for showing interest in helping.
As you guys can see, there's no adobe reader when u expand. Also, I already browsed the reader just in case too. Thus expanding doesnt help. =(
Also, I cant seem to find the "file type" tab in folder options

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

Setting default values for field on screen.

Hello,
I am trying to set default value for one of the fields I have on screen when I execute the custom transaction.
I am doing that in PBO as follows. But the default value is not set for Date field.
PROCESS BEFORE OUTPUT.
MODULE PBO_OUT.
MODULE STATUS_5000.
*&      Module STATUS_5000 OUTPUT
      text
MODULE STATUS_5000 OUTPUT.
SET PF-STATUS 'NON_SAP_DOCUMENT'.
SET TITLEBAR '001'.
ENDMODULE.                 " STATUS_5000 OUTPUT
*&      Module PBO_OUT OUTPUT
      text
MODULE PBO_OUT OUTPUT.
ERDAT = SY-DATUM.
ENDMODULE.                 " PBO_OUT OUTPUT
Please help.
Thanks.
Regards,
Rajesh.

Works Now...

How to hide PNP selection windows and set default values for PNP.

Hi expert,
I am using HR logical database PNP, but I don't want to display selection windoes for running program on PNP, whereas I want to set default value for some selection items in the program. could you please tell me how to get those two targets?
Many Thanks,

Hi
You have mentioned 2 things.
1. Don't want selection windows for running program for PNP - this can be achieved using the HR Report category - You can get more details on HR Report Category on
HR Report Category
2. I want to set default value for some selection items - This you need to achieve in initialization event of your program.
How you can get this can be explained by INITIALIZATION (SAP Library - ABAP Programming (BC-ABA))
Thanks,
Sreeram

Extending flash: how do I set default values for filenames

Hi,
I am trying to set default values for filenames
<choosefile> and <popupslider>s that will show up when
my XMLpanel first loads in my jsfl extension file. It seems that I
can only set default values for textbox items.
How do I do this for filenames and popups?
As a workaround, I also tried using a flash object dialog box
to look like a <choosefile>, or any jsfl command, but then
how do I return those values back to the XMLpanel that calls them.
and pass the data back to my jsfl script.
lemme know if you know a way,

Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha

Set default value for parameter fields

Good day!
Situation:
1. I have 2 parameter fields in reports (dateFrom and dateTo)
2. Before running report in ASP.NET I change value this fields (dateTo = today, dateFrom = today - 3 days)
3.I use for this source:
foreach (ParameterField crParam in CrystalReportSource1.ReportDocument.ParameterFields)
                        CrystalDecisions.Web.Parameter crParametr = new CrystalDecisions.Web.Parameter();
                        string ParametrName = crParam.Name;
                        crParametr.Name = ParametrName;
                          crParametr.DefaultValue = ActionReportParameter.GetParametrValue(ReportName, ParametrName);
                         CrystalReportSource1.Report.Parameters.Add(crParametr);
4. And repurt run without request value parameter fields.
5. BUT!!! now I need request value parameter fields before report start running - I want set default values for filelds and offer user change its before report start run.
How do this?
Thanks

I believe you need to create your own parameter promt screen. Capture what the user entered and pass that to the report(?).
slv

Set default value for people picker only when user checks a checkbox (Sharepoint 2010)

The javescript in below link works for me.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/2b130f64-3db2-484a-9a53-ccbe18d2c5de/set-default-value-for-people-picker-in-list-template-current-user?forum=sharepointgenerallegacy
However, I'd like to set default user for people picker only when user checks a checkbox.
I am new to development. Could you please help me on this requirement ?
Thank you very much.

Hello,
Use this link to to validate checkbox value, if true then set the person or group value (i.e. as posted in your link).
http://geekswithblogs.net/haniamr/archive/2011/03/10/validate-that-a-checkbox-is-checked-using-javascript.aspx
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Need to set default values for the fields plant and location in ME21N

Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advance

hi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam

How can I set default values for Allocate Mode in AO config?

Hi, How can I set default values for allocate mode in AO config. To be specific, in the attached vi, I need to set the Allocate Mode in AO Config to 'Use FIFO Memory (6)' if the value inside my case structure is false and to 'no change (0)' if the value inside the case strusture is true.
Solved!
Go to Solution.
Attachments:
generateWaveformFIFO.vi ‏15 KB

Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha

Is there any way we can set default value for a Date Attribute to current date in Master Data Services

Is there any way we can set default value for a Date Attribute to current date in Master Data Services.
I as well wants to know that is there any posibility to show Calendar control while input data into respective date attributes.
Thanks.

Hi Anagha,
So far i havent found any way to set todays date by default from MMI, but i guess this flow should work as workaroud
1. Add buisness rule which can set a default value when Date = NULL/Blank
2.get the entity table ,use -select EntityTable from mdm.tblEntity where Name = '<enter entity name>'
3.Go to that table and add a after update trigger like
if uda_<entityid>_<attributeid(Date attribute)> = default value
update uda_<entityid>_<attributeid(Date attribute)> =getdate() where id = <LastUpdatedRow>
I will check on this too from my side.
By the way AFAIK i dont think so calendar control integration is possible .

TM2-1100: Unable to set default rotation for slate/tabl​et mode

Similar Messages

Maybe you are looking for

TM2-1100: Unable to set default rotation for slate/tablet mode