Tm2t. When using High GPU and in secondary landscape, pen and touch react like in landscape

So I just my tm2t and found this odd problem. When Im using the tablet with the High performance GPU and go to secondary landscape the pen and touch react like the screen is in normal landscape. I switch to Low power GPU and the touch and pen is OK. Im so confused and angry!!!
Denis

We uninstalled all the ATI software and disabled the driver/card last year because no matter what we did, this problem could not be resolved. We are mostly mobile and do not need high end graphics. The ATI card gets totally in the way of doing anything mobile and wanting us to exit our apps to switch on/off the GPU - are they crazy?

Similar Messages

PSE crashes when using the Detail Smart Brush plenty of memory and speed -please advise

PSE crashes when using the Detail Smart Brush plenty of memory and speed -please advise

I have a similar thing happening here, but on my aging iMac8,1 (3.06, 6 gigs of ram, plenty of internal and external scratch space) No wacom here, a Logitech mouse though, running via USB overdrive.
With me it's undos that are typically causing the hang, and as such, I notice it happening and don't keep clicking around. It hangs for anywhere from 30 seconds to 3 minutes or so and then I can continue working. Once, it was happening on a document I had open for a while, once it was occurring on a file I opened, made an errant click, and hit undo. This was a 46.6 MB CMYK tif. I also had it occur while drawing a simple selection with the polygonal lasso - each time it would hang on the third click. That time, it would unhang, but then the selection would be all messed up and not display what was being selected.
Each time it happens, I see photoshop pinned at 99-100% in iStat. Doesn't seem to be related to running out of memory, as there is usually a good amount free when it's happening. I tried using the internal drive as the swap, and that didn't seem to matter.
I've been forced to go back to CS5 for the time being, but would love to see this solved. Is there any further info I could provide?

When using Safari, my iPad 1 will end Safari and return to the home screen for no apparent reason, any ideas as to cause and solution?

When using Safari, my iPad 1 will end Safari and return to the home screen for no apparent reason, any ideas as to cause and solution?

See if the following help.
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Turning off iCloud and multitasking gestures on the iPad might also help.

Safari is having problem loading messages in gmail. When using other browsers, there is no problem loading and viewing the messages. What is going on? please help!

safari is having problem loading messages in gmail. When using other browsers, there is no problem loading and viewing the messages. What is going on? please help!

I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.

Application crashes when using JNI with Jdk 1,2, 1.3 and 1.4

Hi!
I have this application that has a GUI written in Java and a file parser written in C. JNI is used to connect these parts together. The problem is that the application only works when I am using jdk 1.1.8 but not when using jdk1.2, jdk1.3 or jdk1.4. I am running the application on a Solaris 8 machine.
I have not written the application myself but I am going to be working with it from now on. But I have today little knowledge with JNI and I have tried different approaches to solve the problem. For example I have tried to used DDD together with GDB to find out what the problem is but with no luck. When I run the application using jdk1.4 I get the following error when the JVM crashes:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 10 occurred at PC=0xFA023164
Function=Java_Bitmap_setDebug+0x1C
Library=/usr/u/lal/micview/micview2_1_0_beta1/libBitmapImpl.so
Current Java thread:
at Bitmap.setDebug(Native Method)
at DisplayPanel.loadFile(DisplayPanel.java:396)
at MicPlot.loadFile(MicPlot.java:1452)
at MicPlot.loadFile(MicPlot.java:1441)
at MicPlot.miOpen_Action(MicPlot.java:1267)
at MicPlot$SymAction.actionPerformed(MicPlot.java:1184)
at java.awt.MenuItem.processActionEvent(MenuItem.java:588)
at java.awt.MenuItem.processEvent(MenuItem.java:548)
at java.awt.MenuComponent.dispatchEventImpl(MenuComponent.java:285)
at java.awt.MenuComponent.dispatchEvent(MenuComponent.java:273)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:452)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
Dynamic libraries:
0x10000 /opt/java/jdk1.4/bin/java
0xff360000 /usr/lib/libthread.so.1
0xff3a0000 /usr/lib/libdl.so.1
0xff280000 /usr/lib/libc.so.1
0xff270000 /usr/platform/SUNW,Ultra-4/lib/libc_psr.so.1
0xfe000000 /opt/java/j2sdk1.4.1/jre/lib/sparc/client/libjvm.so
0xff220000 /usr/lib/libCrun.so.1
0xff200000 /usr/lib/libsocket.so.1
0xff100000 /usr/lib/libnsl.so.1
0xff1d0000 /usr/lib/libm.so.1
0xff250000 /usr/lib/libw.so.1
0xff0e0000 /usr/lib/libmp.so.2
0xff0b0000 /opt/java/j2sdk1.4.1/jre/lib/sparc/native_threads/libhpi.so
0xff080000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libverify.so
0xff030000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libjava.so
0xfe7e0000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libzip.so
0xfe4e0000 /usr/lib/locale/en_US.ISO8859-1/en_US.ISO8859-1.so.2
0xedd00000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libawt.so
0xfc480000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libmlib_image.so
0xfc410000 /opt/java/j2sdk1.4.1/jre/lib/sparc/motif21/libmawt.so
0xeda80000 /usr/dt/lib/libXm.so.4
0xfa090000 /usr/openwin/lib/libXt.so.4
0xfa3d0000 /usr/openwin/lib/libXext.so.0
0xfc7e0000 /usr/openwin/lib/libXtst.so.1
0xed980000 /usr/openwin/lib/libX11.so.4
0xfa2a0000 /usr/openwin/lib/libdps.so.5
0xfa3b0000 /usr/openwin/lib/libSM.so.6
0xfa1d0000 /usr/openwin/lib/libICE.so.6
0xed880000 /opt/java/j2sdk1.4.1/jre/lib/sparc/libfontmanager.so
0xfa390000 /usr/openwin/lib/locale/common/xlibi18n.so.2
0xfa1b0000 /usr/openwin/lib/locale/iso8859-1/xomEuro.so.2
0xfa190000 /usr/lib//liblayout.so
0xfa050000 /usr/openwin/lib/locale/common/ximlocal.so.2
0xfa010000 /usr/u/lal/micview/micview2_1_0_beta1/libBitmapImpl.so
Local Time = Thu Oct 3 13:32:47 2002
Elapsed Time = 35
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.1-beta-b14 mixed mode)
# An error report file has been saved as hs_err_pid27692.log.
# Please refer to the file for further information.
Abort
From this information I think that the problem should be in the native method setDebug. But I have tried to set a breakpoint at the beginning of that function in the C part but with no luck. The application crashes before it reaches that position in the C file.
What could possibly go wrong between the setDebug function in the C part and the function call in the Java part?
When using GDB, GDB cannot figure out what is wrong it just returns a hex address, no function name.
I would really appreciate some help. I have tried everything that I can come up with!
Best regards
Lars

I have figured out that the application fails on its first call to the native methods.
So I have this Bitmap class that contains all the native calls and it is defined shortly as follow:
public class Bitmap {
static {
System.loadLibrary("BitmapImpl");
native void setDebug(int debuglevel, int statistics);
There are many more native methods defined in Bitmap, but I only show the setDebug method because that is the first one that is executed and also the one that immediately fails.
My setDebug C function is defined as follow in BitmapImpl.c
#include <time.h>
#include <stdio.h>
#include <limits.h>
#include <fcntl.h>
#include <jni.h>
#include <math.h>
#include <errno.h>
#include "Bitmap.h"
#include "data.h"
jint debug = 0;
jint statistics = 1;
JNIEXPORT void JNICALL Java_Bitmap_setDebug
(JNIEnv *jenv, jobject jo, jint d, jint s)
debug = d;
statistics = s;
My libBitmapImpl.so file is compiled using the following Makefile and using GNU gcc:
JAVAPATH=$(JAVAINCLUDEPATH)
LMACRO=-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DSOLARIS
CSOURCE=BitmapImpl.c
all:
gcc -O3 -G $(LMACRO) -I$(JAVAPATH) -I$(JAVAPATH)/solaris \
$(CSOURCE) -o libBitmapImpl.so
It is still a total mystory why the application fails. I have tried it on a RedHat Linux machine and there it works fine. But not on Solaris. Only if I use the jdk1.1.8 but not a later one.
Would really appreiciate some help!
Best regards
Lars

When using photos from the "Media" option in Applescripts and other apps, it takes a LONG time to load the photos from iPhoto...

It also happens when using the Media option in programs like iMovie. Has anyone found a solution for this problem?

That is long...
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
If it is...
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there.
Regards
TD

TS2755 I receive message prompting me to enter apple ID password when using normal phone functions. I can cancel and still use phone but, how do I get this to stop coming up?

I receive a message prompting me to enter apple ID when using normal phone functions, if I cancel I can still use phone but why does this keep coming up and how do I change that to only prompt if I want to access apple?

Search the forums before posting please. Your question has been asked and answered dozens of times already.
Settings --> Store --> Apple ID

When using podcast i switch to radio-canada live and it start to stop and restart it and voice control start and stop by it self

When i listen music on my iphone 4 using podcast (training session workout) i switched to radio-canada live and after a while it start to stop and start radio-canada live and voice control stop and start by itself???

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

When using a interactive report I go to aggregate and no column are there

When using a interactive report I go to aggregate, sum and go to choose my columns but I have no column there what am I missing

Just a guess, but have you checked to make sure there's a numeric column in your report (and not, for example, a varchar column that happens to have numbers)?
-David

HT4910 when using i cloud, how do you transfer pictures and contacts to new i phone?

When using i cloud on my i phone, how do you transfer contacts and pictures to new i phone?

Sync your contacts, calendar and other data on your old phone with your iCloud account by turnining sync on in Settings>iCloud. Then back up your old phone to iCloud.
When setting up your new phone, restore it from the backup of your old phone. Then sign into your iCloud account and turn on your data syncing and your contacts, calendars and other synced data will appear on your new phone.

When using mail, I can fill in the address and subject line but cannot get to the body of the email to type.

When using my regular mail, I can hit reply or start a new email and can fill in the address line and the subject line. I cannot get to the body of the email to type my message. The curser will not go there and the keyboard does not pop up. How can I correct this so I can send emails when travelling?
Thank you
TrudyN

Oh, ok. That changes my answer completely. The problem here is that Shawmail's webmail interface isn't made to work correctly with the iPad. Gmail works because Google made sure it works. You need to contact Shaw and ask them to correct this. In the meantime, set up your Shawmail account in the native Mail app on the iPad. Do this by going to Settings>Mail, Contacts, Calendars and take it from there.

TS3274 When using my IPad, the screen will go dim and I need to tap it restore it to its bright state. This same thing happens many, many times while I am using it.

When I am using my IPad, the screen will get dim and I need to tap the screen to get it to brighten up again. This happens repeatedly while I am using it. Is there something I can do to stop that from happening?

You don't necessarily need to set it to never...being set that way, you'll risk depleting the battery in case you forget to lock the screen.
Instead, use a value greater than your previous 2 minute setting...see which time setting would work for you. The settings are:
2 Minutes
5 Minutes
10 Minutes
15 Minutes
Never

When using nant i was told "excepted point(.) and coma(;)".how to solve this error

hi
i am using nant and for my code
            var symmetricKey = new RijndaelManaged() { Mode = CipherMode.CBC, Padding = PaddingMode.Zeros };
it is ok when i compile it by visual studio,but when i use nant i was told"excepted point(.) and coma(;)".
how to solve this error?
any help would be appreciated
best regards
martin

anyway now i realized that since i used .Net Frame work 2.0, and i should use like this
RijndaelManaged symmetricKey = newRijndaelManaged();
            symmetricKey.Mode = CipherMode.CBC;
            symmetricKey.Padding = PaddingMode.Zeros; and i cannot use "var" i've solved this problem and it could be helpful if some one who have the same problem

Timeout errors when using high speed camera.

Hi all.
I'm currently trying to capture images using a Mikrotron EoSens MC1363 camera at high frame rates >500fps. The issue arises when the region of interest (ROI) is decreased in the microtron software (of which screenshots are attached). The ROI must be dropped in order to increase the fps. When MAX is opened and configured to match the camera settings, and grab is initiated, the timeout error occurs. I've attached screenshots of the mikrotron software, max settings, the error and PC used. The OS is windows 7 64 bit. We use the camera config file for the mono version of the camera which i've been informed will cross over to satisfy the colour version we use. Any questions feel free to ask. Thanks.
Attachments:
errors.docx ‏3016 KB
997-EoSens 3CL-MC1362-Manual.pdf ‏1209 KB

Hi Dom.
As you said the maximum frame rate with the ROI set to 1280 x 1024 is 505fps but according to the general information for the camera series:
The Mikrotron EoSens camera series features extremely sensitive high-speed
CMOS sensors available in monochrome or in colour with a resolution of 1280 x
1024 pixels and capture rates of 110 or 500 frames per second. Depending on
the model the image data is transferred in 8 or 10 bits via either CameraLink
(Base, Medium or Full) or Gigabit Ethernet.The region of interest (ROI) can be
freely selected, and the cameras can achieve even higher capture rates up to
120,000 fps when the ROI is reduced
Therefore it was my thought that by reducing the width of the ROI increased frame rates may be reached. Realistically we're looking for as high frame rates as possible so that the camera has capability to pass between projects. Currently the moving object enters and leaves the ROI within a 4 frame window, so frame rates of up to 1000fps would generate more data. Naturally, a point will come where the data cannot be physically written as fast as it is generated (>600MBps). Therefore it would be useful to get a handle onto why the error occurs as well as methods to fix it. Hopefully the problem is being discussed between NI and Mikrotron and we may have some answers in the near future.

When using wusa.exe to install MSU update package and enabling logging using the /log switch, what format are the log files in?

I have been installing a number of hotfixes for Windows 7 using MSU files and the wusa.exe utility included in Windows. I thought it would be a good idea to generate separate log files for each update as it was installed since wusa.exe now supports this
option using /log:<file name>. However, the log files created do not seem to be regular text files or any other log file format that I immediately recognize. When opened in Notepad or Wordpad you can see that they contain a lot of additional binary data
which can't be read by a regular text viewer.
Does anyone know what format these log files are in? What tool should you use to read them?

I have been installing a number of hotfixes for Windows 7 using MSU files and the wusa.exe utility included in Windows. I thought it would be a good idea to generate separate log files for each update as it was installed since wusa.exe now supports this
option using /log:<file name>. However, the log files created do not seem to be regular text files or any other log file format that I immediately recognize. When opened in Notepad or Wordpad you can see that they contain a lot of additional binary data
which can't be read by a regular text viewer.
Does anyone know what format these log files are in? What tool should you use to read them?
Only Microsoft can manage to design something as stupid as this. If you start wusa from the command line, it pops up the alternative command line switches. For log, it just says: " /log - installer will enable logging". It doesn't say that you
should specify the log file name, hence not HOW you specify it (" /log:<path\filename>.") It doesn't say what extension to use for the file, alas which file type it is (" /log:<path\filename.evtx>."). You open it in notepad, you cannot read it.
You open it in sccm's cmtrace.exe/trace32.exe, you get nothing. IT IS NOT POSSIBLE TO IMPLEMENT THIS IN A WORSE WAY. How can something be so bad? How can Microsoft get such stupidity inhouse, when you need to go through six interviews or something to get in??
I cannot believe it - unfortunely, this is seen again and again.

Tm2t. When using High GPU and in secondary landscape, pen and touch react like in landscape

Similar Messages

Maybe you are looking for