Tmboot: internal error: CMDTUX_CAT:1098: ERROR: Can't create queue
Hi,
i am getting "tmboot :internal error:CMDTUX_CAT:1098 error:cant create queue"
*RESOURCES
IPCKEY 123456
#Example:
#IPCKEY 123456
DOMAINID simpapp
MASTER simple
MAXACCESSERS 10
MAXSERVERS 5
MAXSERVICES 10
MODEL SHM
LDBAL N
*MACHINES
DEFAULT:
APPDIR="c:\oltp"
TUXCONFIG="c:\oltp\tuxconfig"
TUXDIR="c:\bea\tuxedo8.1"
"USTR-ERL-1692"
LMID=simple
*GROUPS
GROUP1
LMID=simple GRPNO=1 OPENINFO=NONE
*SERVERS
DEFAULT:
CLOPT="-A"
simpserv SRVGRP=GROUP1 SRVID=1
*SERVICES
TOUPPER
Help me...
Then there are two things. First is:
Using remote Desktop connection: If so then don't use remote Desktop connection without console switch, if you are using it then run "mstsc /console" (console mode)
Another way to start app server on physical machine, or use VNC like software.
And the second thing is:
You should increase some of your Tuxedo IPC Settings, do this:
Go to Control Panel - BEA Tuxedo8.1 Administration - IPC Resources tab
Uncheck Use Default IPC Settings
Click next to where it says IPC Resources it is a little box. When cursor is over the box it will show, New (Insert)
Type in the word Custom and hit enter
Now everything on the right turned from greyed out to white
Change Maximum Number of Message Queues to 1024
Maximum Number of Processes Using IPC 512
Maximum Number of Semaphores to 2048
Maximum Number of Semaphore Sets 2048
Maximum Number of Semaphore Undo Structures 2048
Hit Apply
NOTE: The Tuxedo IPC Helper Service will then need to be restarted. Make sure you shut down all domains and schedulers that are maintained by Tuxedo before doing this.
Thanks,
Neeraj Singh
Similar Messages
-
CMDTUX_CAT:1098: ERROR: Can't create queue
I have Tuxedo 8.1 installed on win 2003 32 bit box.
Whenever I am trying tmboot -y getting the error message as below:--
CMDTUX_CAT:1098: ERROR: Can't create queue
In wslog file it shows as :
LIBWSC_CAT:1037: ERROR: Network message receive failure
LIBWSC_CAT:1059: ERROR: WSL returns error on connection request
LIBWSC_CAT:1055: ERROR: Unable to establish WSL connection
LIBWSC_CAT:1027: ERROR: Unable to connect to WSH
LIBWSC_CAT:1020: ERROR: Unable to obtain authentication level
I know some wrong information in my ubbconfig file, but not able to find.
My ubbconfig file is :
*RESOURCES
IPCKEY 66490
UID 0
GID 0
PERM 0666
MAXACCESSERS 50
MAXSERVERS 50
MAXSERVICES 50
MASTER "USTR-VM-0928"
SCANUNIT 10
BBLQUERY 180
BLOCKTIME 30
SANITYSCAN 30
MODEL SHM
LDBAL Y
NOTIFY SIGNAL
USIGNAL SIGUSR1
TAGENT "TAGENT"
*MACHINES
"USTR-VM-0928" LMID= "USTR-VM-0928"
TYPE="i386NT"
MAXWSCLIENTS=10
TUXDIR="c:\bea\tuxedo8.1"
APPDIR="c:\oltp"
ENVFILE="c:\oltp\envfile"
TLOGDEVICE="c:\oltp\tlog"
TLOGNAME=tlog
TUXCONFIG="c:\oltp\tuxconfig"
ULOGPFX="c:\oltp\ulog"
*GROUPS
K_GROUP1 GRPNO=1 LMID="USTR-VM-0928"
K_GROUP2 GRPNO=2 LMID="USTR-VM-0928"
K_GROUP3 GRPNO=3 LMID="USTR-VM-0928"
*SERVERS
DEFAULT: RESTART=Y MAXGEN=5 REPLYQ=Y
WSL SRVGRP=K_GROUP3 SRVID=3 CLOPT= "-A -- -n //192.63.222.176:3050"
#"-A -- -n0x00021e45c03fdeb0 -w C:\bea\tuxedo8.1\bin\WSH -m 1 "
"c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=1 CONV=Y
CLOPT="-- -sA -ljdoe,7,jdoe,tpscon"
"c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=2
CLOPT="-- -sA -ljdoe,7,jdoe,unsolmsg"
"c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=3
CLOPT="-- -sA -ljdoe,7,jdoe,bromsg"
"c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=11 CLOPT=
"-s MPR_TBL:map_server -- -sA -ljdoe,7,jdoe,mapsvr,1"
"c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=12 CLOPT=
"-s MPR_COL:map_server -- -sA -ljdoe,7,jdoe,mapsvr,2"
"c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=13 CLOPT=
"-s MPR_SQL:map_server -- -sA -ljdoe,7,jdoe,mapsvr,3"
*SERVICES
DEFAULT: PRIO=50 LOAD=50 AUTOTRAN=N
map_server
WSH
Service: TListen8.1 (3050) is running.
Please help me regarding this.
RajeevULOG contains the following:--
024412.USTR-VM-0928!tmboot.4000.2672.-2: 02-17-2011: Tuxedo Version 8.1 32-bit Windows.
024412.USTR-VM-0928!tmboot.4000.2672.-2: LIBTUX_CAT:681: ERROR: Failure to create message queue
024412.USTR-VM-0928!tmboot.4000.2672.-2: FATAL: internal error: CMDTUX_CAT:1098: ERROR: Can't create queue
024529.USTR-VM-0928!tmloadcf.1248.3360.-2: 02-17-2011: Tuxedo Version 8.1 32-bit Windows.
024529.USTR-VM-0928!tmloadcf.1248.3360.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 880 512-byte blocks)
024530.USTR-VM-0928!tmloadcf.1248.3360.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file c:\oltp\tuxconfig has been created
024548.USTR-VM-0928!tmboot.3584.2572.-2: 02-17-2011: Tuxedo Version 8.1 32-bit Windows.
024548.USTR-VM-0928!tmboot.3584.2572.-2: LIBTUX_CAT:681: ERROR: Failure to create message queue
024548.USTR-VM-0928!tmboot.3584.2572.-2: FATAL: internal error: CMDTUX_CAT:1098: ERROR: Can't create queue
071016.USTR-VM-0928!tmloadcf.132.3896.-2: 02-17-2011: Tuxedo Version 8.1 32-bit Windows.
071016.USTR-VM-0928!tmloadcf.132.3896.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 880 512-byte blocks)
071016.USTR-VM-0928!tmloadcf.132.3896.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file c:\oltp\tuxconfig has been created
071023.USTR-VM-0928!tmboot.3596.3920.-2: 02-17-2011: Tuxedo Version 8.1 32-bit Windows.
071023.USTR-VM-0928!tmboot.3596.3920.-2: LIBTUX_CAT:681: ERROR: Failure to create message queue
071023.USTR-VM-0928!tmboot.3596.3920.-2: FATAL: internal error: CMDTUX_CAT:1098: ERROR: Can't create queue
When I executed tmloadcf -y ubbconfig, one folder with name .adm and one configuration file with name tuxconfig are created.
Then I did tmboot -y, it returns error as :
Booting all admin and server processes in c:\oltp\tuxconfig
tmboot: internal error: CMDTUX_CAT:1098: ERROR: Can't create queue
I checked wslog file for more information:--
022711.USTR-VM-0928!?proc.3452.3688.0: 02-17-2011: Tuxedo Version 8.1 32-bit Windows.
022711.USTR-VM-0928!?proc.3452.3688.0: LIBWSC_CAT:1037: ERROR: Network message receive failure
022711.USTR-VM-0928!?proc.3452.3688.0: LIBWSC_CAT:1059: ERROR: WSL returns error on connection request
022711.USTR-VM-0928!?proc.3452.3688.0: LIBWSC_CAT:1055: ERROR: Unable to establish WSL connection
022711.USTR-VM-0928!?proc.3452.3688.0: LIBWSC_CAT:1027: ERROR: Unable to connect to WSH
022711.USTR-VM-0928!?proc.3452.3688.0: LIBWSC_CAT:1020: ERROR: Unable to obtain authentication level
My ubbconfig file contains the following:--
*RESOURCES
IPCKEY 68990
UID 0
GID 0
PERM 0666
MAXACCESSERS 50
MAXSERVERS 50
MAXSERVICES 50
MASTER "USTR-VM-0928"
SCANUNIT 10
BBLQUERY 180
BLOCKTIME 30
SANITYSCAN 30
MODEL SHM
LDBAL Y
NOTIFY SIGNAL
USIGNAL SIGUSR1
TAGENT "TAGENT"
*MACHINES
"USTR-VM-0928" LMID= "USTR-VM-0928"
TYPE="i386NT"
MAXWSCLIENTS=10
TUXDIR="c:\bea\tuxedo8.1"
APPDIR="c:\oltp"
ENVFILE="c:\oltp\envfile"
TLOGDEVICE="c:\oltp\tlog"
TLOGNAME=tlog
TUXCONFIG="c:\oltp\tuxconfig"
ULOGPFX="c:\oltp\ulog"
*GROUPS
K_GROUP1 GRPNO=1 LMID="USTR-VM-0928"
K_GROUP2 GRPNO=2 LMID="USTR-VM-0928"
K_GROUP3 GRPNO=3 LMID="USTR-VM-0928"
*SERVERS
DEFAULT: RESTART=Y MAXGEN=5 REPLYQ=Y
WSL SRVGRP=K_GROUP3 SRVID=3 CLOPT=
"-A -- -n0x00020beac03dfc14 -w C:\oltp\wsenvfile\WSH -m 1"
#### WSL SRVGRP=K_GROUP3 SRVID=3 CLOPT= "-A -- -n //192.61.252.20:279 -m 2 -M 5 -x 5f"
"c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=1 CONV=Y
CLOPT="-- -sA -ljdoe,7,jdoe,tpscon"
"c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=2
CLOPT="-- -sA -ljdoe,7,jdoe,unsolmsg"
"c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=3
CLOPT="-- -sA -ljdoe,7,jdoe,bromsg"
"c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=11 CLOPT=
"-s MPR_TBL:map_server -- -sA -ljdoe,7,jdoe,mapsvr,1"
"c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=12 CLOPT=
"-s MPR_COL:map_server -- -sA -ljdoe,7,jdoe,mapsvr,2"
"c:\BIS$1\tpmapper" SRVGRP=K_GROUP1 SRVID=13 CLOPT=
"-s MPR_SQL:map_server -- -sA -ljdoe,7,jdoe,mapsvr,3"
*SERVICES
DEFAULT: PRIO=50 LOAD=50 AUTOTRAN=N
map_server
WSH
I tried many other option within Server section for WSL, but always getting the same error.
Please help me regarding this.
Thanks
Rajeev -
Can't create queue on W2k Advanced Server...
Hello,
I've just installed Tuxedo 6.5 on W2k Advanced Server and I'm trying to start
the BBL with the Simpapp application example. I've compiled the UBBCONFIG file
with tmloadcf and when I try to start the BBL with tmboot -A, I get the message
Can't create queue (CMDTUX 1098). In the ULOG file I get the LIBTUX 681 error.
I've tried with different values of the IPC resources (multiplying all values
by 10) and I get the same error.
If someone knows why I get these errors please send me an email
Thanks in advance
Pedro M.
[email protected]There can be a problem if there are more than 100 Windows Services defined
prior to the Tuxedo Helper. This has been seen on W2k AS.
If this is the case the Rolling Patch is your only way out.
"Pedro Martín" <[email protected]> wrote in message
news:3c7257ff$[email protected]..
>
Hello,
I've just installed Tuxedo 6.5 on W2k Advanced Server and I'm trying tostart
the BBL with the Simpapp application example. I've compiled the UBBCONFIGfile
with tmloadcf and when I try to start the BBL with tmboot -A, I get themessage
Can't create queue (CMDTUX 1098). In the ULOG file I get the LIBTUX 681error.
I've tried with different values of the IPC resources (multiplying allvalues
by 10) and I get the same error.
If someone knows why I get these errors please send me an email
Thanks in advance
Pedro M.
[email protected] -
Error: Internal/Bug( #609) Automation server can't create object
Hi Friends,
I am new to Oracle BPEL.
I am getting the following error message when I click Flow,Audit and Debug tabs after deploying the process.
Error: Internal/Bug( #609) Automation server can't create object
Had anybody faced this problem and resolved it?IIRC this can be down to browser security setting. You may find you needs to turn some security options on (or at least set to 'prompt' under tools- > internet settings -> secuirty - > custom level... etc
-
XL Reporter Run-time Error '429' ActiveX component can't create object
Hi Everyone,
When trying to install XL Reporter on a Windows 2003 Server SP2 machine getting the following Error:
XL Reporter
Run-time error '429':
ActiveX component can't create object.
Did anyone get this error? Please advise of any steps we can try to resolve.
Kind Regards,
KafilDear Friend,
I had described the problem to our technical support team, and they replied as follows u2013
They solved the Script related error by several stages.
They checked the machine for any mal-ware existence by the tool provided by Microsoft (MS Mal-ware remover).
Then they tried by installing the following patches from Microsoft u2013
http://support.microsoft.com/kb/949140
Windows Script 5.7 for Windows XP
http://www.microsoft.com/downloads/details.aspx?familyid=887fce82-e3f5-4289-a5e3-6cbb818623aa&displaylang=en
Windows Script 5.6 for Windows Server 2003
http://www.microsoft.com/downloads/details.aspx?FamilyId=C717D943-7E4B-4622-86EB-95A22B832CAA&displaylang=en
Windows Script 5.6 for Windows XP and Windows 2000
The internal matter to this problem was about the following DLL and its version u2013
C:\WINDOWS\system32
vbscript.dll
5.5.0.8820
Desired
5.6.0.8820
Check, if the information helps you. -
Installed GoFlex 1.5 TB external drive on my iMac running OS X 10.7.4 and error says Time Machine can't create a backup folder. Any solutions?
Well, to unmount the drive, you can use the Terminal application.
Start in Applications > Utilities > Terminal.
When the Terminal window opens, type - without the quotes and with the space at the end - this:
"diskutil unmount "
Then drag the icon of the unmounted drive from the desktop into the Terminal window - the drive location will be added to the end of the command above. It should look something like this:
diskutil unmount /Volumes/volumename
Then press enter (return).
That should unmount the drive. Now you can try the Time Machine process again with perhaps a different interconnect cable for the GoFlex. -
SBO2004A: Runtime Error 429 ActiveX Component can't Create Object
Hello,
We have an Addon developed with VB6 that run without problems with SBO 6.5.
We have upgraded to SBO2004A and I have referenced in the source code to the 2004 UI and DI. I debug mode (from IDE) we don't have problems, but when I try to execute the addon from a client, I get this error message:
<b>Runtime Error 429 ActiveX Component can't Create Object</b>
Thanks in advance
BlasI'm using Installshield 10.5 to generate the setup file. It's much more easy and not requiered to install Framework 1.1 in each PC client before to install the Addon.
You have to create and msi project, and write the Installscript to retrieve the install directory from parameter string passed by SAP.
After install you must execute the AddOnInstallAPI.EndInstall to notify SAP:
#include "ifx.h"
prototype LONG AddOnInstallAPI.EndInstall();
prototype LONG AddOnInstallAPI.RestartNeeded();
// OnFirstUIBefore
// First Install UI Sequence - Before Move Data
// The OnFirstUIBefore event is called by OnShowUI when the setup is
// running in first install mode. By default this event displays UI allowing
// the end user to specify installation parameters.
// Note: This event will not be called automatically in a
// program...endprogram style setup.
function OnFirstUIBefore()
number nResult, nLevel, nSize, nSetupType;
string szTitle, szMsg, szOpt1, szOpt2, szLicenseFile;
string szName, szCompany, szTargetPath, szDir, szFeatures, szTargetdir;
BOOL bLicenseAccepted;
LIST listID;
begin
nSetupType = COMPLETE;
szDir = TARGETDIR;
szName = "";
szCompany = "";
bLicenseAccepted = FALSE;
// Beginning of UI Sequence
Dlg_Start:
nResult = 0;
Dlg_SdWelcome:
szTitle = "";
szMsg = "";
//{{IS_SCRIPT_TAG(Dlg_SdWelcome)
nResult = SdWelcome( szTitle, szMsg );
//}}IS_SCRIPT_TAG(Dlg_SdWelcome)
if (nResult = BACK) goto Dlg_Start;
Dlg_SdLicense2:
szTitle = "";
szOpt1 = "";
szOpt2 = "";
//{{IS_SCRIPT_TAG(License_File_Path)
szLicenseFile = SUPPORTDIR ^ "License.rtf";
//}}IS_SCRIPT_TAG(License_File_Path)
//{{IS_SCRIPT_TAG(Dlg_SdLicense2)
// nResult = SdLicense2Rtf( szTitle, szOpt1, szOpt2, szLicenseFile, bLicenseAccepted );
//}}IS_SCRIPT_TAG(Dlg_SdLicense2)
if (nResult = BACK) then
goto Dlg_SdWelcome;
else
bLicenseAccepted = TRUE;
endif;
Dlg_SdRegisterUser:
szMsg = "";
szTitle = "";
//{{IS_SCRIPT_TAG(Dlg_SdRegisterUser)
// nResult = SdRegisterUser( szTitle, szMsg, szName, szCompany );
//}}IS_SCRIPT_TAG(Dlg_SdRegisterUser)
if (nResult = BACK) goto Dlg_SdLicense2;
Dlg_SetupType2:
szTitle = "";
szMsg = "";
//{{IS_SCRIPT_TAG(Dlg_SetupType2)
// nResult = SetupType2( szTitle, szMsg, "", nSetupType, 0 );
//}}IS_SCRIPT_TAG(Dlg_SetupType2)
if (nResult = BACK) then
goto Dlg_SdRegisterUser;
else
nSetupType = nResult;
if (nSetupType != CUSTOM) then
szTargetPath = TARGETDIR;
nSize = 0;
endif;
endif;
Dlg_SdAskDestPath2:
if ((nResult = BACK) && (nSetupType != CUSTOM)) goto Dlg_SetupType2;
szTitle = "";
szMsg = "";
if (nSetupType = CUSTOM) then
//{{IS_SCRIPT_TAG(Dlg_SdAskDestPath2)
// nResult = SdAskDestPath2( szTitle, szMsg, szDir );
//}}IS_SCRIPT_TAG(Dlg_SdAskDestPath2)
TARGETDIR = szDir;
endif;
if (nResult = BACK) goto Dlg_SetupType2;
Dlg_SdFeatureTree:
if ((nResult = BACK) && (nSetupType != CUSTOM)) goto Dlg_SdAskDestPath2;
szTitle = "";
szMsg = "";
szTargetdir = TARGETDIR;
szFeatures = "";
nLevel = 2;
if (nSetupType = CUSTOM) then
//{{IS_SCRIPT_TAG(Dlg_SdFeatureTree)
// nResult = SdFeatureTree( szTitle, szMsg, szTargetdir, szFeatures, nLevel );
//}}IS_SCRIPT_TAG(Dlg_SdFeatureTree)
if (nResult = BACK) goto Dlg_SdAskDestPath2;
endif;
Dlg_SQLServer:
nResult = OnSQLServerInitialize( nResult );
if( nResult = BACK ) goto Dlg_SdFeatureTree;
Dlg_ObjDialogs:
nResult = ShowObjWizardPages( nResult );
if (nResult = BACK) goto Dlg_SQLServer;
Dlg_SdStartCopy2:
szTitle = "";
szMsg = "";
//{{IS_SCRIPT_TAG(Dlg_SdStartCopy2)
nResult = SdStartCopy2( szTitle, szMsg );
//}}IS_SCRIPT_TAG(Dlg_SdStartCopy2)
if (nResult = BACK) goto Dlg_ObjDialogs;
return 0;
end;
// OnSetTARGETDIR
// OnSetTARGETDIR is called directly by the framework to initialize
// TARGETDIR to it's default value.
// Note: This event is called for all setups.
function OnSetTARGETDIR()
number nId, nIgnore, nResult;
string szId, szTARGETDIR;
string wCMDLINE;
LIST listID;
begin
// In maintenance mode the value of TARGETDIR is read from the log file.
if( MAINTENANCE ) then
return ISERR_SUCCESS;
endif;
// Set TARGETDIR to script default.
TARGETDIR = "<FOLDER_APPLICATIONS>
<IFX_COMPANY_NAME>
<IFX_PRODUCT_NAME>";
if (CMDLINE != "") then
wCMDLINE = CMDLINE;
StrReplace (wCMDLINE, '"', '', 0);
listID = ListCreate (STRINGLIST);
if (StrGetTokens (listID, wCMDLINE, "|") > 0) then
MessageBox ("Parametros incorrectos.", SEVERE);
else
ListGetFirstString (listID, TARGETDIR);
//MessageBox (TARGETDIR, INFORMATION);
endif;
ListDestroy (listID);
return 0;
endif;
// Read TARGETDIR from the media.
nResult = MediaGetData( MEDIA, MEDIA_FIELD_TARGETDIR, nIgnore, szTARGETDIR );
// Use the TARGETDIR from the media if anything was read.
if( nResult >= ISERR_SUCCESS && StrLengthChars( szTARGETDIR ) ) then
TARGETDIR = szTARGETDIR;
endif;
// Customize the default TARGETDIR for multi-instance application.
// TODO: If you want something different customize the code below.
if( MAINT_OPTION = MAINT_OPTION_MULTI_INSTANCE && MULTI_INSTANCE_COUNT > 0) then
// Start with the current multi-instance count plus one.
nId = MULTI_INSTANCE_COUNT + 1;
// Find a unique TARGETDIR.
while( ExistsDir( TARGETDIR ) = EXISTS )
// Convert to string.
NumToStr( szId, nId );
// Update IFX_MULTI_INSTANCE_SUFFIX
IFX_MULTI_INSTANCE_SUFFIX = "_" + szId;
// Update TARGETDIR
TARGETDIR = TARGETDIR + IFX_MULTI_INSTANCE_SUFFIX;
// Update nId
nId = nId + 1;
endwhile;
endif;
end;
// OnEnd
// The OnEnd event is called at the end of the setup. This event is not
// called if the setup is aborted.
function OnEnd()
string wCMDLINE;
LIST listID;
STRING DLL_FILE;
INT nValue;
LONG nRC;
NUMBER nResult;
begin
if (CMDLINE != "") then
wCMDLINE = CMDLINE;
StrReplace (wCMDLINE, '"', '', 0);
listID = ListCreate (STRINGLIST);
if (StrGetTokens (listID, wCMDLINE, "|") > 0) then
MessageBox ("Parametros incorrectos.", SEVERE);
else
ListGetFirstString (listID, DLL_FILE);
ListGetNextString (listID, DLL_FILE);
// MessageBox (DLL_FILE, INFORMATION);
endif;
ListDestroy (listID);
nResult = UseDLL (DLL_FILE);
if (nResult != 0) then
MessageBox ("No se ha podido cargar\nAddOnInstallAPI.dll", SEVERE);
abort;
endif;
if AddOnInstallAPI.EndInstall() > 0 then
MessageBox ("Error al ejecutar AddOnInstallAPI", SEVERE);
abort;
endif;
endif;
end; -
Vbscript runtime error 429 activex component can't create object
hi i am writing a VB Script where it runs a batch files
but when the batch file is called from the script its giving error as
runtime error 429 activex component can't create object
my script is as follows
strcmd = "utility.bat"
Set wshSystemEnv = wshshell.Environment("USER")
wshshell.Run strcmd
can some one help me with this ?
Thank youSorry, your script makes no sense. You never create the object wshshell
and you never use the object wshSystemEnv. Start the code with
set WshShell = WScript.CreateObject("Wscript.Shell") -
Runtime Error '429': ActiveX component can't create object
Hi,
I am using below code in vb6 application but this is throwing an "Runtime Error '429': ActiveX component can't create object" error.
CreateObject("OracleInProcServer.XoraSession")
is that due to any dll or reference error ?
I have an Oracle client installed on my PC
please share your solution
Thanks in advanceAre either of those 64 bit? If so, your problem is likely related to that.
A 64 bit Oracle client doesn't support OO4O at all, so this code will never work with that client. You need to use a 32 bit one.
If you are using a 32 bit client but on a 64 bit OS, I've found the 11.2.03 installer doesn't properly register the files. Manually registering OraOleDB11.dll may fix it, though we had to do some other registry stuff and it got very ugly. Backing up to a slightly older client should also fix the problem. -
Run-time error '429': ActiveX component can't create object
HI,
I am having the following error in my Excel VBA Run-time error '429': ActiveX component can't create object when running the following code:
Dim objDistiller As New ACRODISTXLib.PdfDistiller6
objDistiller.FileToPDF2 filePath & ".PS", filePath & ".PDF", "T:\Templates\PDFSettings\Standard.joboptions", 1
This code has been working for years on all our systems, but due to recent security issues our administrator changed all user accounts to not have local administrator rights and now when we run this code we get the above error message.
I have had a look at DComcnfg.exe to try and get it to work by setting the default property permissions to allow access by Everyone but I am still getting the error.
Any help would be greatly appreciated.
Regards.
Shane Chapman.Hi Shane,
Here is another way to create PDF with Macro using another API than Distiller. This API is faster too.
Probably this post is not of interest anymore but here is how I have done it:
1. Download PDFCreator: http://sourceforge.net/projects/pdfcreator/
2. Use the following Macro:
Option Explicit
Sub printPDFmacro()
'Author : Ken Puls (www.excelguru.ca)
'Macro Purpose: Print to PDF file using PDFCreator
' (Download from http://sourceforge.net/projects/pdfcreator/)
' Designed for early bind, set reference to PDFCreator
Dim pdfjob As PDFCreator.clsPDFCreator
Dim sPDFName As String
Dim sPDFPath As String
'/// Change the output file name here! ///
sPDFName = "Facture-" & nclient2 & " le " & Format(Date, "yyyy-mm-dd") & ".pdf"
sPDFPath = "E:\Partenaire Scolaire\Comptabilite\Factures"
PDFFileName2 = sPDFPath & "\" & sPDFName
Set pdfjob = New PDFCreator.clsPDFCreator
With pdfjob
If .cStart("/NoProcessingAtStartup") = False Then
MsgBox "Can't initialize PDFCreator.", vbCritical + _
vbOKOnly, "PrtPDFCreator"
Exit Sub
End If
.cOption("UseAutosave") = 1
.cOption("UseAutosaveDirectory") = 1
.cOption("AutosaveDirectory") = sPDFPath
.cOption("AutosaveFilename") = sPDFName
.cOption("AutosaveFormat") = 0 ' 0 = PDF
.cClearCache
End With
'Print the document to PDF
ActiveSheet.PrintOut copies:=1, ActivePrinter:="PDFCreator"
'Wait until the print job has entered the print queue
Do Until pdfjob.cCountOfPrintjobs = 1
DoEvents
Loop
pdfjob.cPrinterStop = False
'Wait until PDF creator is finished then release the objects
Do Until pdfjob.cCountOfPrintjobs = 0
DoEvents
Loop
pdfjob.cClose
Set pdfjob = Nothing
end sub
Have any questions, just have to poke me.
Michael -
Error message: Automation server can't create object
Hello
I'm currently receiving the error message: 'Automation server can't create object' when trying to view reports. This only happens when i try to view them through the IIS server using the .net launchpad. It happens with both reports that i have produced and Feature example reports, it also happens from both client machines and the server.
Any ideas on how to fix this issue?
regards
MattHi,
I am not sure if you still are having this issue. In my experience I have seen this issue if for all the BO related services the rights are not proper. These have to be given from dcomconfig.
Hope this helps
Amit -
We are trying to connect a WebLogic Application server through Jolt to Tuxedo.
We have the our MAXWSCLIENTS=100, and are trying to create a single connection
pool through WebLogic. The errors reported in the logs are:
121813.nprkscope01!JRAD.6155.1.0: GP_CAT:1569: ERROR: Unable to lock network mutex
-1 at 95
121813.nprkscope01!JRAD.6155.1.0: JRAD_CAT:1526: INFO: JRLY connection is UP
121813.nprkscope01!JSL.6151.1.0: JOLT_CAT:1083: "ERROR: Error assigning connection
request, can't create any more handlers"
121814.nprkscope01!JSL.6151.1.0: JOLT_CAT:1083: "ERROR: Error assigning connection
request, can't create any more handlers"
I have attached the configuration file we are using. Any advice would be appreciated.
Thanks
[ubbsimple]Hi,
I am running Netweaver 7 and ERP2005.
J2EE support pack is 9. The sap note that you mentioned is for NW2004 and our system is running on NW2004s.
Now I am trying to reconfigure the sld. In case if you can suggest me another solution, I will be very happy to try that out...
Thanks for your reply
Edited by: Rakesh Bothra on Apr 20, 2011 4:23 AM -
I have a problem with the Task Scheduler. It is not opening properly it is giving Error Message box at this time i am unable to post. The Tasks Scheduler is starts with a error alert "No more threads can be created in the System.NAPStatus UI".
I am unable to view the history of the tasks schecduled.It is giving message as
"The user account does not have permission to Access the Task History."
How to fix it. It is frustrating as can't able to track my Tasks and Create new Tasks. Any Suggestions helpful.
Thanks in Advance.
RehaanKhan. MHi,
Thanks for your post.
Please check event viewer if there are some error logs?
Meanwhile, there is a similar thread has been discussed:
Receiving error about "no more threads"
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9a9e22e4-d947-4d19-b06c-aaadda624dbc/receiving-error-about-no-more-threads?forum=winservergen
Regards.
Vivian Wang -
Error in installing BAM, can not create orabam user
Hi all,
I tried install Oracle BAM and always getting the same problem. Error at creating orabam user.
Any idea?
Afonsohi all
having same problem
i can cannot create orabam user
my oracle home is set
i have also set my path ahead of oracle home
C:\OracleBAM\ClientForBAM\bin in environmental variable..
i can login into my database as sysdba also
but when screen goes to create ORABAM USER it gives me the error cannot create the user
kindly help pls
CHeers -
Error Installing/Uninstalling iTunes - Can't create a temp file
I have tried to upgrade to 8.0.2 and I am having some problems. I have tried to do this several times (after reboots, etc...etc..) and i keep getting a message that says itunes cannot create a temp file that it needs to finish the installation process. I have actually tried to uninstall itunes and i get the same message.... now when i open it - i get an error message that itunes cannot access cd information from the net and that i have to reinstall itunes to fix the problem. Any thoughts?
Which version of PSE you are on?
Please try the troubleshooting steps mentioned here : http://kb2.adobe.com/cps/408/kb408940.html
As a first step, you can try running Organizer directly from its exe in c:\program files or program files x86\adobe\elements organizer Ver\PhotoshopElementsOrganizer.exe by right clicking it >> run as Admin. Now try taking slideshow output. Keep all background processes turned off from Edit >> Pref >> Media Analysis, while taking output.
Thanks
Andaleeb
Maybe you are looking for
-
Before FireFox was updated to ver 3.6.15, FF would open in Avast sandbox with no issue. Since the update to FF I can only open FF outside of Avast sandbox. Avast version 6.0.1000 I turned off all Add-ons and still No Joy! Windows 7 Pro 64 bit; I7-950
-
The Movie Channel (TMC) not searchable in TV Listings Search Box. ??
On the TV Listings page on the Verizon website, when you type in The Movie Channel (TMC) or enter the number of that channel, the results are "no results". WHY is that?? (i've only tried that one channel. Probably others don't show either.) Search
-
ITunes 6.0.2.23 cutted sound
Since I have upgraded iTunes to 6 versions I'm not able to reproduce any song without having bad sound quality and sound cutting which is causing me to be unable to use it anymore. In few words the player is non working. The sound is good first 2-3 s
-
EO1013 no serial or network connection
I have an HP IP KVM EO1013. The device powers up, and all local facilities work well: I can use the attached servers happily through the keyboard, monitor and mouse attached. My problem is with the network side of the device. There appears to be no L
-
Search results displaying all records, please help
i did post this before but didnt have any luck I have used my search script before but tried it again and it is returning ALL the results from the DB..Can anyone see what i am missing? $var_SalaryReq_Recordset1 = "%"; if (isset($_GET['SalaryReq'])) {