TMG 2010 report problem Operation has timed out

Hello.
I stuck and i'm really need assistance
We has a TMG 2010 RTM version and i decide to update it to latest rollup and SP (dumb head)
So at now we have TMG 2010 SP2 rollup 4.
Before i update TMG reports work fine but at now reports not working at all.
When i try execute a report ( or shedule daily or weekly report) i have same issue
Error 31289:
The report "Daily" could not be generated. Report Server error information: The report Daily could not be generated. Report Server error information: The operation has timed out.
The error occurred on object 'Reports' of class 'Reports Configuration' in the scope of array 'TMG`
I read all guidliness( include this http://www.isaserver.org/tutorials/Microsoft-Forefront-TMG-How-to-use-SQL-Server-2008-Express-Reporting-Services.html) and not find something useful.
Settings correct, and i not changed any settings.
And at now my ideas end i ask your help.

That would be expected as the RAT key does not exist by default on a TMG system. You will need to create it and the subkeys referenced along with the values.
Create as described in the article.
Hth, Anders Janson Enfo Zipper

Similar Messages

The operation has timed out

Hello Forum,
I was running a report that was built on report builder at some point an error message of the operation has timed out will come up.
I have set the time out to 0 values and more than 600 seconds too.
On SQL the report ran within 6 minute.
Will be glad for quick response.
Thank you.
Disu Ridwan

Hi Disu,
I assumed that you open the report builder from the report manager or you have connectted to the report server.
As you have mentioned that set the timeout value of the dataset didn't work. Please reference to the similer thread below to set the other time out in the configuration file and so on:
Report Builder 2.0 / 3.0 errors out with 'The operation
has timed out' when previewing a report saved in Report Server takes more than 10 minutes
Steps to Resolve SSRS Timeout Issues
"The operation has timed out" when rendering a report
If you problem still exists, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Collab CopyProjectMetaData - the operation has timed out

For the life of me, I can't get the CopyProjectMetaData to run w/o timing out. It'll work about 1 in 10 trys if that. I'm using CopyProjectContent on the same two projects successfully everytime. But CopyProjectMetaData is basically useless. Anyone?

Hi Disu,
I assumed that you open the report builder from the report manager or you have connectted to the report server.
As you have mentioned that set the timeout value of the dataset didn't work. Please reference to the similer thread below to set the other time out in the configuration file and so on:
Report Builder 2.0 / 3.0 errors out with 'The operation
has timed out' when previewing a report saved in Report Server takes more than 10 minutes
Steps to Resolve SSRS Timeout Issues
"The operation has timed out" when rendering a report
If you problem still exists, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Secure Store The Operation has Timed Out

Hi
When clicking the managed service application for secure store in SP 2010, we get 'The operation has timed out' error
Any ideas?

Check ULS log against Secure Store events. At first look, it seems to be database access/connection problem. But logs will say more.

The operation has timed out default value too low - c# windows application

Hello,
I get the message that the operation has timed out when certain operations take too long, which would be any on our development/test server.
I either need to make an asychronous call which I will investigate or to find the code that sets this value to ten minutes.
Anybody know how to reset the value to ten minutes?
Thanks,
Stephanie

The timeout is occurring on the client so it not a particular error that's being returned by the server.
The default timeout with the EWS Managed API is 90 seconds and is set on the ExchangeService Object. You can set this to a higher value eg to set it to 5 minutes
server.timeout = 300000;
Why it fails ? if its overnight then Backups can be the cause eg if they are snapshotting the server or some other backup mechanism could mean the server is very busy for a time. Or any other number of specific environmental factors. This is really
a job for your Network admin to determine with server and network monitoring. I would suggest you check the EWS.Log on the Exchange server to see what happened at that time.
What you should do at a code level is handle the exception, I would suggest wait for 60 seconds after the exception (this will cater for most throttling issues) and then try the same request again. If it fails again after a pause then
you generally have a larger problem.
Cheers
Glen

ServiceRequestException : The request failed. The operation has timed out

I wrote simple client using EWS Managed API. And let it run for one night. It was working fine. But when I checked it back in the morning, I found my application stopped. I checked logs I got following exception:
2014-01-08 01:49:05.3649 | Error | Exception while fetching mails : The request failed. The operation has timed out | MyNamespace.MyClass.myMethod
Immediate Stack Trace
===================================================================================
Microsoft.Exchange.WebServices.Data.ServiceRequestException : The request failed. The operation has timed out
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
at Microsoft.Exchange.WebServices.Data.SimpleServiceRequestBase.InternalExecute()
at Microsoft.Exchange.WebServices.Data.MultiResponseServiceRequest`1.Execute()
at Microsoft.Exchange.WebServices.Data.ExchangeService.InternalLoadPropertiesForItems(IEnumerable`1 items, PropertySet propertySet, ServiceErrorHandling errorHandling)
at Microsoft.Exchange.WebServices.Data.ExchangeService.LoadPropertiesForItems(IEnumerable`1 items, PropertySet propertySet)
at MyNamespace.MyClass.myMethod() in c:\MyProject\MyClass.cs:line 190
Inner Exception 1 : Stack Trace
The operation has timed out
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
Since the Exception message did not contain error code that Exchange server usually returns like (401) Unauthorized or (403) Forbidden, I am unable to pinpoint any reason for this to occur, since the functionality worked perfectly several times before
this exception occurred as I can check in my logs. Also my diagnostic class which runs on the occurrences of any exception immediately tried to ping exchange server and re-initialize ExchangeService object. When I checked diagnostics logs after this exception
time for the result of diagnostics, then it was able to ping the exchange server and the ExchageServer object also initialized successfully. So I am out of any reason now.
The exception occurred on the last line of the following code:
ItemView itemView = new ItemView(100, 0);
FindItemsResults<Item> itemResults = null;
PropertySet psPropSet = new PropertySet(BasePropertySet.IdOnly);
itemView.PropertySet = psPropSet;
PropertySet itItemPropSet = new PropertySet(BasePropertySet.IdOnly)
ItemSchema.Attachments,
ItemSchema.Subject,
ItemSchema.Importance,
ItemSchema.DateTimeReceived,
ItemSchema.DateTimeSent,
ItemSchema.ItemClass,
ItemSchema.Size,
ItemSchema.Sensitivity,
EmailMessageSchema.From,
EmailMessageSchema.CcRecipients,
EmailMessageSchema.ToRecipients,
ItemSchema.MimeContent
itemResults = service.FindItems(WellKnownFolderName.Inbox, itemView);
if (itemResults.Items.Count != 0)
service.LoadPropertiesForItems(itemResults.Items, itItemPropSet);
Any guesses why this could have happened? Or just some random network congestion? Am I forgetting to log some more information. Should I also log Exception.Data or something else?

The timeout is occurring on the client so it not a particular error that's being returned by the server.
The default timeout with the EWS Managed API is 90 seconds and is set on the ExchangeService Object. You can set this to a higher value eg to set it to 5 minutes
server.timeout = 300000;
Why it fails ? if its overnight then Backups can be the cause eg if they are snapshotting the server or some other backup mechanism could mean the server is very busy for a time. Or any other number of specific environmental factors. This is really
a job for your Network admin to determine with server and network monitoring. I would suggest you check the EWS.Log on the Exchange server to see what happened at that time.
What you should do at a code level is handle the exception, I would suggest wait for 60 seconds after the exception (this will cater for most throttling issues) and then try the same request again. If it fails again after a pause then
you generally have a larger problem.
Cheers
Glen

Error message... operation has timed out

My new ipod for my daughter will not show up in itunes. It says i need to download the latest version (10.5) of itunes. Every time I attempt to download itunes 10.5, I get the error message "the operation has timed out" itunes could not be downloaded. How do I download the latest version? I want to put songs on my daughters new ipod. Thanks

Temporarily turn off any virus protection and firewall.

Question about EWS - The operation has timed out

hi everyone,
I'm developing a solution which uses public folder database in Exchange Server to store tasks:
- We use 1 account to access to public folder database by using EWS.
- Currently, this public folder database contains 60000 tasks and they are being accessed by 700 users, they always have the following exception:
04/23/2015 09:41:15: - The request failed. The operation has timed out
Message :The request failed. The operation has timed out
Source :Microsoft.Exchange.WebServices
Stack Trace : at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
at Microsoft.Exchange.WebServices.Data.MultiResponseServiceRequest`1.Execute()
at Microsoft.Exchange.WebServices.Data.ExchangeService.FindItems[TItem](IEnumerable`1 parentFolderIds, SearchFilter searchFilter, String queryString, ViewBase view, Grouping groupBy, ServiceErrorHandling errorHandlingMode)
at Microsoft.Exchange.WebServices.Data.ExchangeService.FindItems(FolderId parentFolderId, SearchFilter searchFilter, ViewBase view, Grouping groupBy)
Please help.
Thanks a lot.
Phuc

Thanks Glen for your reply.
Here is a code block which retrieve the number of task of some groups
foreach (var bu in request.BusinessUnits)
SearchFilter businessUnitFilter = new SearchFilter.IsEqualTo(BusinessUnitAliasProp, bu);//, ContainmentMode.FullString, ComparisonMode.IgnoreCase);
SearchFilter[] filters = new SearchFilter[] { actualOwnerFilter, statusFilter, businessUnitFilter };
var filterCollection = new SearchFilter.SearchFilterCollection(LogicalOperator.And, filters);
GroupedFindItemsResults<Item> taskResults = this.exchangeService.FindItems(_publicFolderId, filterCollection, itemView, groupByApplication);
if (taskResults != null && taskResults.ItemGroups != null)
foreach (var groupItem in taskResults.ItemGroups)
if (!dict.ContainsKey(groupItem.GroupIndex))
dict.Add(groupItem.GroupIndex, new Dictionary<string, int>());
if (!dict[groupItem.GroupIndex].ContainsKey(bu))
dict[groupItem.GroupIndex].Add(bu, groupItem.Items.Count);
Please let me know if it's too complex and might affect to the performance of Exchange Server

Cannot send mails to mail server. (The operation has timed out.)

I have configured database mail in sql server 2008 r2 on my local machine.
While testing I have observed that some of mails are not getting triggered.
Log file shows following message-
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 7 (2013-04-30T10:23:57).
Exception Message: Cannot send mails to mail server. (The operation has timed out.)
I have wriitten on SP for snding mails which sends 94 mail to different ail
address out of which only 35 are getting delivered.
Plz Assist me.

Hi Prashant Parit,
Please apply the latest SQL Server 2008 R2 Service Pack. And try to stop and restart SQL Server Agent.
See similar thread:
http://social.msdn.microsoft.com/Forums/en-US/sqltools/thread/6d3cd4ca-0a4e-4c84-bf1e-b8565c963c38.
Thanks.
Maggie Luo
TechNet Community Support

Internet Explorer will not allow me to download Mozilla Firefox on my computer. Its say the operation has timed out and I can't figure out why...

I have tried saving it to a jump drive and it still will not work. It also does not let me save the file anyhwere else on my hard drive. What is the problem?

Sadly there are some 'bad carriers' out there. If you have a VERY long download(and iPad OS updates can be 100s of megabytes) and the carrier has an interruption in service(router reboots, modem disconnects, etc) iTunes will timeout.
You might want to try updating later in the evening when usage starts to drop off(kids go to bed, people start watching cable instead of Netflix/Hulu) or early in the morning.
The other alternative is to update at a friend's place who might have a better carrier or is on a better subnet

Hi Experts , I am currently facing problems while running restricted version copy .. The log says 0 location products copied and that the process has has timed out. the error message is /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014, th

Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
Regards
Jerel

Hi, thank you for your replies, I found out few things about my servlet, and its portability
and i have few questions, although i marked this topic as answered i guess its ok to post
I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
of the modified files to the user for them to download the modified files.
What i am using to get the tempdir i will paste
File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
System.out.println(baseurl);
baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
links to the user for download ?
and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
And i want to create unique directory for each request made to the servlet , so file names dont clash.
one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
Reply A.S.A.P. please..
Thanks and regards,
Mihir Pandya

HI I HAVE PROBLEM WITH APPSTORE ON MY IPHONE,,,i CANT DOWNLOAD ANYTHINK,,,,BECAUSE MY SESSION HAS TIMED OUT...WHAT I HAVE TO DO NOW?

HI I HAVE PROBLEM WITH APPSTORE ON MY IPHONE,,,i CANT DOWNLOAD ANYTHINK,,,,BECAUSE MY SESSION HAS TIMED OUT...WHAT I HAVE TO DO NOW?

Hello dear sir alex_h1 i'm still have the same problem my problem is not with imessage or facetime i'm using ipad2 so still cant activate my ipad i hope you help me soon thank you .

Why do I get the error saying my session has timed out and to start the operation again from the beginning when trying to instal lion

I've purchased Lion from the app store and successfully installed it on three computers...however, now I'm receiving an error saying my session has timed out and to start the operation from the beginning??? Help..Thanks

This is asked and answered mnay times every day. The forum search abr is on the right side of this page.
Disable your firewall/security software.

I am having problems installing new software for my ipod i keep getting a message that the network has timed out. I have tried two different computers and networks what else can I do?

I am having problems installing new software for my ipod
I keep getting a message that the network has timed out.
I have tried two different computers and networks what else can I do?

Try temporarily disabling your firewall and anti virus software and try again...
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/

I have tried to update the operating system on my ipad several times without success. Each time it reaches 353.2mb of 353.2mb and starts to process the file. Nothing happens and then I get a message saying the network connection has timed out.

I have tried to update the operating system on my ipad several times without success. Each time it reaches 353.2mb of 353.3mb and starts to process the file. Nothing happens and then I get a message saying the network connection has timed out. The network is still connected.

Have you tried temporarily turning off your firewall and antivirus software whilst the download is happening ? A number of people on here have had success downloading it after doing so.

TMG 2010 report problem Operation has timed out

Similar Messages

Maybe you are looking for