TMG Error Code 502 Proxy Error. The directory name is invalid. (267)

Hi,
I am having problem with a website in specific.
Is showing the following error message.
Error Code: 502 Proxy Error. The Directory name is invalid. (267)
Server: TMG.personaldomain.local
Source: web filter
I have found no information in the logs to help identify the problem.
I suspect that may be temporarily unavailable from the website. I enter the site without using the TMG and the same is responding.
The problem is solved when I restart the service "Microsoft Forefront TMG Firewall"
I suspect that may be cached in TMG that the site remains unavailable.
Any idea?
Tks.
MCITP|Enterprise Administrator

Hi,
Thank you for the post.
I did some research and found 267 error code may occur where the TMG tracing showed an issue accessing the Malware Temporary Storage directory which was resolved by changing the direction from C:\windows\temp directory
to a custom directory. You could make this change as a pro-active step. Meanwhile, if you are running AV software on the TMG server, please also ensure you have reviewed the following article:
http://technet.microsoft.com/library/cc707727.aspx
Regards,
Nick Gu - MSFT

Similar Messages

•Error Code: 502 Proxy Error. The directory name is invalid. (267)

Hi..my name is Fajar..
I facing same situation getting an error cannot access
www.pajak.go.id. I have followed up soulution to restart firewall services its resolved only one day, once I get back to the office cannot access again.
btw sometimes after the error shown up, I press refresh button and the page getting blank and then refresh again. the error shown up again.
is there any permanent solution to resolved this issue?

Hi,
Thanks for your question.
Can you access other websites?
Did you use TMG 2010 and install SP1 on it? Did you configure HTTPS inspection?
If yes, it may because TMG 2010 SP1 sends an empty client certificate to the web server during the initial Secure Sockets Layer handshake and
you can refer to the KB below:
http://support.microsoft.com/kb/2423401/en-us
In addition, did you mean that the issue went away after you start Windows Firewall service? In general, Windows Firewall must be enabled on the computer where TMG operates. I am not sure if it is due to the Windows Firewall is not working.
You can also check if Windows Firewall is enabled when you receive that error.
Best regards,
Susie

Invalid Response Code: (502) Proxy Error

I am getting following error when trying to consume a web service using a proxy .
I have two Server, named A and B
The wsdl file was generate at A by Function Module => Utilities => More Utilities => Create Web Service => From Function Module. And I can send data in Web Services Navigator(A Server ).
So I import it in Web Dynpro as a model.But I deploy it in another J2EE engine(B Server).
the Error log:
java.rmi.RemoteException: Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (502) Proxy Error ( æ¾ä¸å°ä¸»æºã ). The requested URL was:"http://hqbd3.sinopec.com:8000/sap/bc/srt/rfc/sap/ZHQMRO_RP_RYJG_WS?sap-client=200"com.sinopec.bwbcs.wd.rpryjg.batchinput.medol.proxies.ZHQMRO_RP_RYJG_WSSoapBindingStub.bicCfzhqmroRpRyjg(ZHQMRO_RP_RYJG_WSSoapBindingStub.java:99) com.sinopec.bwbcs.wd.rpryjg.batchinput.medol.proxies.ZHQMRO_RP_RYJG_WSSoapBindingStub.bicCfzhqmroRpRyjg(ZHQMRO_RP_RYJG_WSSoapBindingStub.java:108) com.sinopec.bwbcs.wd.rpryjg.batchinput.medol.Request_ZHQMRO_RP_RYJG_WS_bicCfzhqmroRpRyjg.execute(Request_ZHQMRO_RP_RYJG_WS_bicCfzhqmroRpRyjg.java:87) com.sinopec.bwbcs.wd.rpryjg.batchinput.RpryjgBatchCreate.assignElementToRpryjgListData(RpryjgBatchCreate.java:387) com.sinopec.bwbcs.wd.rpryjg.batchinput.RpryjgBatchCreate.createRyjgData(RpryjgBatchCreate.java:320) com.sinopec.bwbcs.wd.rpryjg.batchinput.RpryjgBatchCreate.onActionBatchInput(RpryjgBatchCreate.java:217) com.sinopec.bwbcs.wd.rpryjg.batchinput.wdp.InternalRpryjgBatchCreate.wdInvokeEventHandler(InternalRpryjgBatchCreate.java:261) com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666) com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) javax.servlet.http.HttpServlet.service(HttpServlet.java:760) javax.servlet.http.HttpServlet.service(HttpServlet.java:853) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) java.security.AccessController.doPrivileged(Native Method) com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Whether it is because different Servers?
Edited by: Cheney Cao on May 20, 2008 3:38 AM

/****:/#

Error running javaws.exe "The directory name is invalid"

I am attempting to run a VPN client for Sabre. Once I installed their VPN client (installing JRE 1.5 + their custom icon) I am unable to successfully launch the VPN using the desktop icon as a power user in an active directory network environment, however as an admin it works fine.
C:\Program Files\java\jre1.5.0_11\bin\javaws.exe "The Directory name is Invalid" <----Error message I get when I launch VPN.
This is what the target location says - "C:\Program Files\Java\jre1.5.0_11\bin\javaws.exe" http://sabrevpn.sabre.com/vpnclient/sslvpn-tn.jnlp
Now I have enabled access for our limited users by adding their group with modify access to the c:\program files\java folder and still I get this error. Any idea what this could be?!
Thanks in advance.

Hi,
Thanks for your question.
Can you access other websites?
Did you use TMG 2010 and install SP1 on it? Did you configure HTTPS inspection?
If yes, it may because TMG 2010 SP1 sends an empty client certificate to the web server during the initial Secure Sockets Layer handshake and
you can refer to the KB below:
http://support.microsoft.com/kb/2423401/en-us
In addition, did you mean that the issue went away after you start Windows Firewall service? In general, Windows Firewall must be enabled on the computer where TMG operates. I am not sure if it is due to the Windows Firewall is not working.
You can also check if Windows Firewall is enabled when you receive that error.
Best regards,
Susie

I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?

I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?

BUMP
Yes, I just get that message. I don't see how I could investigate this problem.
I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
Can anybody help me?

Certutil -crl problems (the directory name is invalid)

Another problem for you fine experts to consider...2 tier PKI, offline Root 2008 R2, 1 Sub Ent CA in Domain1 (2008 R2) and 1 Sub Ent CA in Domain2 (2012 R2).
SubCA 1 and 2 are configured pretty much identically, however when setting up SubCA 2 I am having issues running the Certutil -CRL command to publish the CRL.
My CDP locations are configured as follows;
65:c:\WIndows\System32\CertSrv\CertEnroll\%3%8%9.crl
79:ldap://CN=%7%8,CN=CDP,CN=Public Key Services,CN=Services,%6%10
6:http://pki.domain2/CertEnrolment/%3%8%9.crl
65:file://\\pki.domain2\CertEnrolment\%3%8%9.crl
I can confirm that the base CRL publishes correctly to the CertEnroll location and LDAP correctly. But it fails trying to publish to the HTTP/File location (which is the same path).
I get the error:
CertUtil: -CRL command FAILED: 0x8007010b (WIN32/HTTP: 267 ERROR_DIRECTORY)
CertUtil: The directory name is invalid
Also the Delta CRL fails on the CertEnroll default directory as well as the file/http path with error;
Active Directory Certificate Services could not publish a Delta CRL for key 0 to the following location: file://\\pki.domain\CertEnrolment\CANAME+.crl.
Operation aborted 0x80004004 (-2147467260 E_ABORT)<o:p></o:p>
I'm pretty certain it's not a permissions issue as I've added Everyone for NTFS/share permissions to test without any change. The install was done with an Enterprise
Admin account but I'm doing all the testing now with a normal admin account (admin in the CA/server but not domain or enterprise admin).<o:p></o:p>
<o:p></o:p>
The File/HTTP location is on the CA itself (I know this is likely not best practise, but needs to be there in the short term) so not sure if the Windows firewall comes into play.
Thanks!

Hi driko,
It's not a best practise to give Everyone NTFS/share permissions!
What I suggest is you
1. Create a dedicated folder f.e. "C:\Repository" on CA and share it only with permissions to specific account (see below)
2. In CA publish CRLs to c:\WIndows\System32\CertSrv\CertEnroll\%3%8%9.crl
only and create a task in task scheduler that will be running on the dedicated account and will copy c:\WIndows\System32\CertSrv\CertEnroll\*.crl
to \\pki.domain2\Repozitory\*.crl
3. Make sure that account that is running this task on CA1 (Domain 1) has enough permissions for Repository share in Domain 2 (try running cmd as this user on
CA1 and copy files manually to \\pki.domain2\Repository\)
4. Map your http://pki.domain/CertEnrolment URL with IIS to physial C:\Repository\ folder path
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

Error code "Couldn't resolve the host name"

I cannot access internet from tablet
WiFi shows connected
noticed this yesterday
any suggestions on how to fix error

Did you manually setup your wifi. Can not resolve host name usually means a problem with the dns. Which router are you using?
Be a Shepard and not an iSheep.

The directory name is invalid

Can anyone explain how to avoid this error when using CreateProcess to launch a java app from within a Windows Service.
The exact same call works fine when executed from the context of a Windows application or Windows Command Windows (DOS box). Yet, it fails when invoked from a Windows service.
I've tried all the standard tricks of running the services as a specific user, granting FULL rights to all user ID on my machine, etc.
Is there something weird about the relationship between a service and the java engine. It looks like the java engine doesn't even get launched...

Have a read of Techincal reference document on 'Quoting and Special Characters in MaxL'.
I just picked these lines for you,
One backslash is treated as one backslash by the shell, but is ignored or treated as an escape
character by MaxL. Two backslashes are treated as one backslash by the shell and MaxL.
Hope it helps.

When trying to install Firefox 3.6.11, after extraction, I get the message "The directory name is invalid", and the installation won't continue (Windows Vista Home Basic 6.0).

That's about it.

I downloaded a program from Roboform called rfwipeout.exe. I backed up my passwords, identities, etc and completely removed all traces of roboform. This did not help. When I re-installed the roboform new release it got the same message that it thinks I am using version 3.6 of Firefox instead of 11.0. There must be some setting in the Firefox folders that never gets changed when you update to a new version.
Soon after that I ran a backup of Firefox profiles identities, etc using MOZ BACKUP. I had never noticed this until then but the message asks if I want to backup Mozilla Firefox 3.6. Since 2 completely different programs refer to my installation as 3.6 there must be something wrong in one of the Firefox files.

I downloaded the newest version of firefox but it will not install, it is giving me a message saying the directory name is invalid. Why and what can I do to fix.

The above message pops up when I try to install the new version of firefox. It will not let me install the new version. I do not know how to fix it. Please advise.

Try a custom install.
*https://support.mozilla.com/kb/Custom+installation+of+Firefox+on+Windows

Issue with HTTPS in sender soap channel: HTTP 502 Proxy error

Hi
We have a situation where we are providing the target url in SOAP receiver channel dynamically.
This is a synchronous scenario.
Whenever we use the url starting with "HTTP" it works but on using "HTTPS" we are getting the following error "HTTP 502 Proxy error"
Kindly help us resolve this issue.

Hi Anurag
Have you tried to open the HTTPS url in the web browser?
Please check with 3rd party and find out whether the web service supports the HTTPS url or not.
Please check the doc below. It may help
502 Bad Gateway Error (What It Is and How To Fix It)

TREX creation process fails - directory name is invalid

Hello All,
I've installed a TREX instance to be linked up to two SRM instances (SRD and SRT). I had done this successfully on a prior server, but recently we got a new
server to run TREX on.
When I reinstalled TREX on the new server, I have
success having SRD connect to TREX via SM59, but SRT fails because the program isn't getting registered.
While looking into the details, I find this error message in the traces:
[00344] 2007-04-16 14:05:25.519 i Daemon TrexDaemon.cpp(03508) :
start 'TREXRfcServer.exe -r -host=usalsapt -instance=sapgw52
-service=TREXRfcServer_13' failed
[00344] 2007-04-16 14:05:25.519 e Daemon TrexDaemon.cpp(02951) :
creation of process '"TREXRfcServer.exe" -r -host=usalsapt
-instance=sapgw52 -service=TREXRfcServer_13' failed: The directory name
is invalid.
Has anyone experienced something similar before? Or have an idea as to which directory the error message references? Thank you
~TJ

Hi TJ,
did you check in SM59 if the RFC destination is of type "regestration" and has case-sensitive correct the name in there ?
Do you see a different error when SRT is down ?
I guess, you checked to ping usalsapt from the TREX box already ? The instance number is 52 as well ?
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

HTTP/1.1 502 Proxy Error ( Connection refused )\nVia: 1.1 TMG01 -SP\nConnection

Hi,
I have an application that
executes calls to a jetty
server locally. When I try to
run the application I get the error below.
HTTP/1.1 502 Proxy Error ( Connection refused )\nVia: 1.1 TMG01-SP\nConnection: Keep-Alive\nProxy-Connection: Keep-Alive\nPragma: no-cache\nCache-Control: no-cache\nContent-Type: text/html\nContent-Length: 3904 \n
But, this error only occurson a particular machine, when I run
the the same application on other machines have no problems.
Someone
knows what could be? I disabled
the firewall, proxy, includes
rules on the firewall but nothing does this
application working.

Hi Namrata,
thank to answer my question, I haven't access to TMG Server. But, I get a error page from ForeFront with the message:
Technical Information (for support personnel)
Error Code 10061: Connection refused
Background:The server you are attempting to access has refused the connection with the gateway. This usually results from trying to connect to a service that is inactive on the server.
Date: 9/25/2014 5:42:52 PM [GMT]
Server: TMG02-SP.proxy
Source: Remote server

Cannot establish proxy connection: 502 Proxy Error ?

Im receiving a strange error message within GRID (Oracle 10.1.0.4.0/Aix5.2) every time I try and start/stop a Db on the ‘Startup/Shutdown:Specify Host and Target Database Credentials’
Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. ISA Server is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. )
Whats causing this issue ?

In order for you to configure the Management Service to use a proxy server, this task is pretty similar as to configure a proxy server in a browser, you must declare the proxy server, its port and the exceptions where the proxy is to be skipped.
1. Edit the Oracle management server configuration file:
ORACLE_HOME/sysman/config/emoms.properties
2. Either add or comment out and configure these entries at the above referred file:
proxyHost=proxyhost.domain
proxyPort=proxy_port
dontProxyFor=.domain1, .domain2, .domain3, ...
3. You must rebounce your OMS so this file can be re-read.
This is the manual approach. This configuration can also be done at the same grid control at the configuration section.
~ Madrid
http://hrivera99.blogspot.com/

HTTP/1.1 502 Proxy Error in Navigation editor

Hi,
When i try to playback a script in e-load nav editor i get the following error even when i specified correct proxyauth info in Auth manager.
Error:
HTTP/1.1 502 Proxy Error ( The ISA Server denied the specified Uniform Resource Locator (URL). )
This URL which is failing in nav editor otherwise is working fine when manually accessed through a browser with the correct proxy authentication.
please let me know as to what am i missing here
thanks

Are you running any auto configuration scripts in IE?(Select Advanced/Internet Options, click connections tab then the "Lan Settings" Button. Sometimes these can cause problems. There is a way around this if that is the case. Let me know.

TMG Error Code 502 Proxy Error. The directory name is invalid. (267)

Similar Messages

Maybe you are looking for