TMG - problem with server that is unable to update the configuration

I use Windows server 2008 EBS and all servers are virtual and instaled on ESXi host. Forefront is instaled on secure server. On basic configuration the firewall in runing but the CSS and adam are not in sync. Even on a small change in rules the firewall goes in lockdown mode. Even if a start the service in firewall goes in lockdown mode in 5 minutes. When i change the rule to basic settings the firewall start to work ok. I rapair CSS and now the CSS and ADAM are in sync but again when i change even a letter in a firewall rule, firewall goes in lockdown mode in the moitoring the configuration is unable to update in is not in sync any more. And now if a restart the server the configuration is also unable to update and is not in sync. Also it show that the last time he was synced in 19.12.1999 ?????
I am working on this problem for weeks and i cant find the solution. Is there a problem with CSS or ADAM?
I would apritiate any help!
Thanks!
Joze

I have the same problem, I have an array with NLB working properly, buy, without any reason I can notice that configuration status is in UPDATING, so, I have to apply the maintenance and patch procedure to restart the server and to recover from this state,
somebody knows what can I do?
In the other hand, I´d wish also to know if there is any particular alert I can enable to send email alert and then to schedule the restart.
thx!

Similar Messages

HT1476 I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out i

I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out in this.

Hi melvin victor,
Welcome to the Support Communities!
The information below may help you troubleshoot your iPhone battery issue:
iPhone Battery and Power - Apple Support
http://www.apple.com/support/iphone/repair/battery-power/
Battery & power
Is your iPhone battery draining too quickly or not holding a charge? Try restarting it first. You can also adjust several settings to extend the battery life of your iPhone.
I hope this information helps ....
- Judy

HT201210 i have a problem with my iphone 4s when i update the system its giving me error 36 ? and the phone docent want to open! any one please know who to solve this problem

I cant open or upate my iphone 4s because its give me message erorr 36, please any one know what dose it mean erorr 36 and who i solve this problem.

Hi mohamed00,
Thanks for visiting Apple Support Communities.
I recommend following the method below if you are not able to restore your iPhone and see an "error 36:"
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Check for hardware issues
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
Cheers,
Jeremy

HT1694 I'm having a lot of problems with the hotmail account, regularly is indicating an error in the server, that I have to introduce the password again that late that this is wrong. I have changed the password making this shorter but it does not work.

I'm having a lot of problems with the hotmail account, regularly is indicating an error in the server, that I have to introduce the password again that late that this is wrong. I have changed the password making this shorter but it does not work.

bump? Is bumping allowed? Lol.
I just really need some help here.

I cannot sign in to icloud because of problems with server

I have Lost It All!
I cannot find all of my iTunes info.
I tried signing into iCloud due to a message "problem with server".

I have used the solution below to fix mine and others that have run into this issue.
Start --> Programs --> Accessories (Right Click on Command Prompt) --> Run as Administrator
then type in: "Netsh winsock reset" (-without the quotes-)
Hit enter, restart PC, iCloud For PC should now connect without any server errors
(This solutions will work in some instances when trying to fix errors associated when you are unable to connect to iTunes also.)

Why my Ipod send a message like "a problem with server bloq connection of ID Apple"

Hi i just buy an Ipod Touch 8GB is my second one the last one have lost in the street, i Know my Apple ID and my password but when Itry to setup the new one send that message i am from mexico and my message is in spanish more less like this Impossible start session A problem with server is bloking the connection with the ID Apple . Try to connect again.

What is the error message you are receiving and it is from iTunes or your iPod Touch?
B-rock

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

Apple ID FAQ http://support.apple.com/kb/HE37

I have problem with account that i can't make update or buy from app store There is massage appear in my payment page that i must contact with i tunes support to complete this transaction Please help me to fixe this problem as soon possible Hany hassan 00

I have problem with account that i can't make update or buy from app store
There is massage appear in my payment page that i must contact with i tunes support to complete this transaction
Please help me to fixe this problem as soon possible
Hany hassan
0096597617317
0096596677186
Thank you

You need to Contact iTunes Support...
Apple Support iTunes Store Contact Us

TS3694 hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regar

hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regards

Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.

Apple tv is giving me a meesage that says... There is a billing problem with a previous purchase. Go to the iTunes Store on your computer and click Purchase History to resolve problem. I have gone to my purchase history but can't seem to fix this issue.

Apple tv is giving me a meesage that says... There is a billing problem with a previous purchase. Go to the iTunes Store on your computer and click Purchase History to resolve problem. I have gone to my purchase history but can't seem to fix this issue.

You can contact the iTunes Store Customer Service department at no charge using the form on their Support page (select the category and subcategory closest to the issue you're reporting and you'll find an "Email Us" button) and explain your problem to them.
Copied from Varjak Paw in :https://discussions.apple.com/thread/2598671

Problem with JMenus that Persist - Is this a Java bug?

I am having a problem with JMenus that persist. By this I mean
that my drop down menus persist on the screen even after they have
been selected.
I've checked the Java bug database, and the following seems
to come closest to my problem:
Bug ID: 4235188
JPopupMenus and JMenus persist when their JFrame becomes visible
State: Closed, not a bug
http://developer.java.sun.com/developer/bugParade/bugs/4235188.html
This page says that the matter is closed and is not a bug. The
resolution of this matter printed at the bottom of the page
is completely abstruse to me and I would appreciate any
comments to understand what they are talking about.
The code at the end of my message illustrates my problem.
1. Why should paintComponent() make any difference to
Menu behavior?
2. Is this a bug?
3. What's the workaround if I have to paint() or repaint()?
Thanks
Tony Lin
// Example of Menu Persistence Problem
// Try running this with line 41, paintComponent(), and without line 41
// Menus behave normally if line 41 is commented out
// If line 41 exists, menus will persist after they have been selected
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class P2 extends JPanel {
JMenuItem[] mi;
public P2() {
JFrame thisFrame = new JFrame();
thisFrame.getContentPane().add(this);
JMenu menu = new JMenu("My Menu");
JMenuBar mb = new JMenuBar();
mi = new JMenuItem[4];
for (int i=0; i<mi.length; i++) {
mi[i] = new JMenuItem("Menu Item " + String.valueOf(i));
menu.add(mi);
mb.add(menu);
thisFrame.setJMenuBar(mb);
thisFrame.setSize(400,200);
thisFrame.setLocation(150,200);
thisFrame.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent we) {
System.exit(0);
thisFrame.setVisible(true);
public void paintComponent(Graphics g) {} //Affects menu behavior!
public static void main(String[] args) {
new P2();

Well, my understanding of the way painting works is that a component doesn't UNPAINT itself. Instead a message is sent to the component under the coordinates of the menu to REPAINT itself.
In your demo program the JFrame is the component under the JMenu. The paintComponent() method of JFrame is empty, so nothing gets repainted.
I added super.paintComponent(g); to the method and everything works fine.

My sister had a problem with call volume being too low on the iPhone 5S. Is the iPhone 6 louder? Is anyone else feeling that call volume on iPhone 5S isn't loud enough?

My sister had a problem with call volume being too low on the iPhone 5S. Is the iPhone 6 louder? Is anyone else feeling that call volume on iPhone 5S isn't loud enough?

I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
Have you tried a bluetooth headset yet?

Problem with BB10 that still not fixed...when will we see them fixed?

there are some problem that I have noticed on the Verizon network that is Gimping my BB10 experience which is not making me happy
1 The Verizon network is causing a big problem with remote file access. (still no update on a fix)
2 The Verizon network is causing a problem with built in voice mail. (still no update on a fix)

The newer versions of the BB10 OS software fix the first problem, however I use the free YouMail app (sideloaded app officially provided by the developer) for Virtual Voice Mail so I don't know about the problem with #2.
You can load the official 10.2 OS upgrade that is being released worldwide onto your Verizon Z10. The Verizon reps here will say you will void your BlackBerry warranty, but these are official OS's, not "leaks", so it will not. Go to CrackBerry.com to find out how, it's not too hard to install unless you don't know anything about using a computer.

Tried opening Firefox and got error code 502 - problem with server - how do i fix please

i tried to open internet through Firefox as usual and got repeated error message 502 (problem with server - try again in 30 seconds) - but no joy. is there a problem with the server or is there a problem at my end somehow?
tks Paul

Thanks for the suggestion Rhonda. You're correct in saying this is impractical though. The fact is, I can't open a tab to keep it open. After doing some online research, I was able to locate a site where I could download a previous Firefox version (6.0). Problem solved! Google: "''How can I find a previous version of Firefox''. As I stated in my original question, Mozilla should not update w/o making certain it doesn't create these issues. I spent hours on this. I also turned off auto updates. I appreciate your suggestion. Thank you!

My adobe cc keeps telling me that its unable to reach the server

my adobe creative cloud keeps telling me that its unable to reach the server. It told me to check the firewall and i did but im still unable to download programs

Mybe,because you did not installed well,or because the server does not work propperly at that time!

TMG - problem with server that is unable to update the configuration

Similar Messages

Maybe you are looking for