TMS - CCMS Alert domain doesn't appear

On my training system when I go into STMS, then CCMS Alert Monitor,(The "Bell" icon") the domain doesn't appear under change and transport system. It also won't allow me to create it in rz20. I've tried redistributing and activating the stms configuration and it still won't appear. Ideas?
Thanks,
Daniel

Your Problem is not with STMS configuration.
Based on what you have explained i am thinking because of the system copy you have performed the MTE classes of target system have been over written from source system (of your system copy)
But it is not a big deal to bring the MTE classes again.Below is the procedure.
Logon to the Solman - RZ21 --> Configure Central reaction ---> Assign Central reaction
Under System ID - Select SID of your satelite System --> +MTE Class from the system.
Once you do that you should get following message ### MTE Classes were collected by <Satellite System>
Hope this helps

Similar Messages

Windows Components/remote desktop services/remote desktop session host/profile doesn't appear to be working on 2008R2 boxes

I have two domains.   One is an account domain with a one way trust with the resource domain.   Resource domain trusts the account domain and has a number of 2008R2 servers running within. I am experiencing severe logon delays
due to these servers being unable to access the server that hosts the user home folder specified directly on the user account profile tab from the account domain.   When using my workstation in the actual account domain (corporate) I have no
problems.
Because of these network restrictions, I need to override the 2008R2's desire to access that user home folder location in the account domain.
So far the best thing I have found to try is Windows Components/remote desktop services/remote desktop session host/profile/Set Remote Desktop User Home Directory
The problem is that so far I have tried to configure this to point to both a local folder as well as a network path and it doesn't appear to be doing anything.   Not seeing any errors in the app or system log either.
It is still trying to map the path in the account domain.
Any ideas?
Is there a better way to accomplish my goal?   The servers in the resource domain will be Citrix servers and there will be a lot of users connecting from the account domain.
I tried this setting too, but it only seems to work on the 2012 machines in my Resource domain.
With the introduction of Windows 8 and Windows Server 2012 there is now a new group policy setting called “Set user home folder” and is found under Computer Configuration > Policies > Administrative Templates > System > User Profiles
Help!

Hi,
This might be due to permission problems. Please check whether the user accounts for whose home folder to be redirected have permissions in the shared folder specified in the server.
Checkout the below link on Best Practice for creating Roaming Profile and Folder Redirection
http://www.grouppolicy.biz/2010/08/best-practice-roaming-profiles-and-folder-redirection-a-k-a-user-virtualization/
Regards,
Gopi
JiJi
Technologies

How to ignore a particular Aborted Job from CCMS Alerts

Hello All,
I am trying to ignore a particular Aborted job from reporting in CCMS alerts. Any one can suggest how can I achieve this ?
Regards
Amit

Johan Stf wrote:
Writing the script would take longer time than just drop the users manually. :)True, if there weren't that many databases and the operation didn't have to be done very often. Given the OP's description of 40 databases and frequent execution, I'd definitely write a script. The script could have the list of databases baked in, and pass the username as a command line parameter. There would be no need to check to see if the user exists .. just issue the DROP. If it exists, it gets dropped. If it doesn't exist, so what?

CCMS Alert Monitor (edit monitor-configuration.xml. ?)

Hi Friends
I'm trying to change the default polling time for the CCMS Alert Monitor, 5 minutes instead of 30 minutes.
In http://help.sap.com/saphelp_nwpi71/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/content.htm you can read:
Accuracy
The default polling period for the monitor is 30 minutes. If you want to have shorter polling periods, you can change them in the SAP NetWeaver Administrator as follows:
1. Choose Availability and Performance Management ® Resource Monitoring ® Java System Reports (alias: /nwa/java-sys-reports).
2. Select an arbitrary Number of errors entry in the monitoring tree of the Adapter Engine (leaf node).
3. Choose Configuration in the right-hand pane.
4. Choose Edit in the dialog box that appears.
5. Change the polling period to 5 minutes, for instance.
6. Choose Save and wait until saving is finished (be patient, since this may take a while).
7. Choose Configuration Management ® Infrastructure Management ® Java Configuration Browser.
8. Choose apps ® sap.com ® com.sap.aii.af.app ® Monitoring Configurator ® monitor-configuration.xml.
9. In the xml file, change the polled-by-template period to the same value as above, for example, 5 minutes.
10. Save the modified xml file.
11. Choose Operations Management ® Infrastructure Management ® Start & Stop ® Java EE Services to restart the Monitoring service to apply the changes.
But in step 9, the xml file I've found in my PI 7.1 (SP6) is this:
<monitor-configuration>
<monitor-semantics />
<monitor-tree />
</monitor-configuration>
Also, there is no way to modify that file, you can only display it or download it.
can anyone tell me how to edit the file.
regards
raja

Hi Raja,
This is the same as doing the following:
You can locate the monitor-configuration.xml file in the SDA com.sap.aii.af.app.sda (inside META-INF folder). You can find this SDA in the install directory of PI installation. In this XML file please locate and edit the following tag:
<template-info template-name="SAP_XIJ2EE_RCRDS">
                        <polled-by-template period="30" unit="MINUTE">
                            <generating-resource
                                name="com.sap.aii.utilxi.rtcheck.mx.standard.XIJ2EEComponentMBean" type="APPLICATION"/>
                            <template-attribute-mapping>
                                <invoked-resource-method name="getMonitoringRecords"/>
                            </template-attribute-mapping>
                        </polled-by-template>
                    </template-info>
Change the above to the following *************
<template-info template-name="SAP_XIJ2EE_RCRDS">
                        <polled-by-template period="5" unit="MINUTE">
                            <generating-resource
                                name="com.sap.aii.utilxi.rtcheck.mx.standard.XIJ2EEComponentMBean" type="APPLICATION"/>
                            <template-attribute-mapping>
                                <invoked-resource-method name="getMonitoringRecords"/>
                            </template-attribute-mapping>
                        </polled-by-template>
                    </template-info>
The main change is the polled-by-template value from 30 mins to 5 mins as per your req ******
Construct back the SDA (you can search SDN for that) with this edited XML and then redeploy this SDA with the help of JSPM tool.
This will re-start the PI Server for the changes to come into effect.
I hope this helps.
PS: You can consult your BASIS consultant to locate this sda and re-deploy it on PI Server.
Regards, Gaurav.

Creating a new event in my Calendar on my iPhone then event doesn't appear

I've had issues lately with creating events on my iPhone. I'll create one, and then when I hit done, it doesn't appear in my calendar, and I have to create it again. I've noticed it often happens when I try to set an alert with it. Very few times will it appear after the first time I create the event. Has anyone else experienced this issue? What have y'all done to deal with this issue? Thanks in advance.

See if you can go to your Calendars App and select a previous event to see what Calendar the event was added to (iCloud or Yahoo). After that is determined you can go to www.iCloud.com or calendar.yahoo.com and add the event there to see if it will populate on your device. Another troubleshooting step is deleting the iCloud account from your device and also deleting the Yahoo account. Then check to see if you can add an event without it syncing to a email. If you can then it may have just been a bug and you can add both accounts back and try adding the event again. I would also recommend only using one service to sync your Contacts, Calendars, Reminders, etc. Such as either iCloud only or Yahoo only, as using multiple accounts means your data is spread around and can be hard to isolate when something goes wrong.

Enterprise Manager 10g DBControl - Listener doesn't appear on home page

I have a testing system, running on Microsoft Windows Server 2003, Enterprise Edition, Service Pack 2 with an Oracle DB 10g v10.2.0.3.0 installed. A few days before today I found out that I don't have the link with the listener on the Enterprise Manager DBControl home page. I'm attaching a print screen with the image I have on the home page.
[http://img249.imageshack.us/my.php?image=listener20090126de7.jpg]
I didn't observe if this problem got from the initial installation, but I think it didn't, as this was a clean system and everything should have worked fine. Yet, since the initial installation the system got into some changes regarding the Operating System and I refer to the name of the server by joining a domain and got added the suffix of the domain. The listener works fine, I can connect from any workstation and do whatever I want, but the link with the listener doesn't appear from anyplace I try to connect and do something.
Please help me if you know any solution regarding this.
Thank you.

Hello and sorry for being late with an answer.
I solved the problem so now I can't try the last solution to see if it helps. The solution I chosed was to deconfigure the DBControl with EM and then reconfigure it back.
On one hand this helped solving the problem, but on the other hand all the settings made in EM got lost. There was no problem losing these settings as this was a test system. If it would have been a productive system having more settings in EM I don't think I'd choose the same solution I mentioned above.
I'll mark the question as answered but mentioning once again that I don't recommend this for a productive system.
Thank you all for the suggestions.

Site doesn't appear in iWeb

I've transferred an iweb site from one computer to another via dropbox. I've put it in library/application support/iweb, where it shows up, but it doesn't appear in iWeb when I try to work on it. Any idea why not?

Delete the iWeb preference file from your Home/Library/Preferences folder and then try launching iWeb again. It will look in your Users/Home/Library/Application Support/iWeb folder folder by default for the domain file to open. Deleting the preference file resets location to the default.
If that doesn't work you can use the following script provided by Cyclosaurus that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
Just launch the applicaiton, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Exchange 2010's "Online Archive" doesn't appear in Outlook 2010

Hi,
I recently installed Exchange 2010, and all is working fine but the online archive feature.
I activated it for 2 of my users, it appears correctly in OWA, but doesn't appear in Outlook 2010 (Tech Preview).
What I am missing ? The only howtos I found state that you only have to setup Outlook, and the main mailbox + the online archive will appear... But I just have the main mailbox.
If you've an idea... :)

I did some testing on this whole Personal Archive thing as even when using a new version and new license key the archive wasn’t showing in Outlook 2010 (yet was showing in OWA).
So I setup two machines (VMs) running Windows 7 Ultimate.
One was x64 and the other x86 but vanilla installs.
Installed Office 2010 Professional Plus download from TechNet (the iso image with both x86 and x64 versions on it).
Installed the lastest Office updates published via MS Update.
Used the same license key for both installs of Office.
Exchange 2010 backend running SP1.
When the machines are not in a domain the archive doesn’t show in Outlook (both x86 and x64).
Pop the machines into the same AD domain as the Exchange server and hey presto the archive shows on both Outlook versions (x86 and x64).
Just to check things I removed them from the domain - archive folder missing again.
Re-added back to domain - archive folder shows.
It seems for the TechNet version anyhow the machine should be in a domain.
I can’t comment on other versions/license keys.
Regards

CCMS Alerts keep coming for the system which was removed from System Monito

Hello SOLMAN Experts,
Iu2019ve noticed quite strange behavior of my SOLMAN CCMS Alerts: CCMS Alerts keep coming for the system which was removed from the System Monitoring.
Have you ever experienced this?
Please advice
Thank you
123

Hi 123,
Please ensure that autoreaction methods are deleted for those systems.
You can verify system to autoreaction method assigments via RZ21 --> Technical Infrastructure --> Configure Central system -->Assign Central Autoreaction
also check if that system is appearing as online as follows
RZ21-> Topology --> system overview --> Monitored and Remote SAP systems
if yes , make it offline to stop triggering alerts.
I hope this information will help you.
Thanks,
Rupali

Google Map doesn't appear automatically when a prompt changes value

Hi everybody,
I'm using OBIEE 11.1.1.6.0 updated to 11.1.1.6.1 and I'm facing a curious problem.
I created a dashboard with three sections.
In the first section there is a prompt which shows the Top number of providers.
In the second section there is a table on the left side which shows how many members we have for each provider, and a pie chart on the right side.
In the third section there is a narrative view used to see a google map with ALL the providers' locations. This map have to show ALWAYS ALL the locations (no matter what I selected as Top number of providers, so it will be always the same).
So, when I change the Top number of providers, the table and the pie chart refresh automatically, but the map doesn't refresh, or better it doesn't appear ! (I don't see the map anymore, I see a white space....). To see it again, I have to refresh the entire page.....
This functionality worked in the past, but with this version it seems that it doesn't work properly....
Has anyone faced an issue like this using the narrative views with google maps ??? This is a problem that I need to solve urgently.
Any help or hint will be appreciated
Thanks in advance
Alex

It looks to me like this has nothing to do with the digital signature prompt and everything to do with a badly formed URL. In a URL the domain name is not case sensitive but all the path information is case sensitive. Whether one should use http://www.mycompany.com/Abc/Xyz/ or http://www.mycompany.com/abc/xyz/ depends only on what the HTTP server expects. So which of these does the HTTP server expect?

BTMM orange. Miniserver doesn't appear anymore.

We used to have a perfect working file sharing server that we could access as well locally as remotely. For about one week now, the miniserver doesn't appear when connecting remotely anymore. This started to happen after I accessed the server to do two things
1- Upgrade to 10.6.7
2- I kept receiving a "Miniserver.local certificate is void" or something of that style. So I went into the certificate manager and tried to update the certificate, didn't really manage to, probably did something stupid... whatever
The point is that from that moment I could not access the server remotely anymore.
Any suggestions (apart from going back to school and learn more about unix based servers, which I will not do...

¿Chile? ¿Qué hora es? Might those recent daylight saving time (DST) changes for your timezone be involved here?
Pending an update from Apple, y'all probably need to [update your timezone rules|http://juretta.com/log/2007/10/05/newzealand_daylight_saving_time_change_mac_os_x_andjava> to match the current scheme for the switch-over.
Do have a full disk backup before making these changes, just in case.
And FWIW, if using Miniserver.local as your DNS host name for your server (outside of Bonjour), then that tends to cause things in DNS to go wonky; that .local top-level domain (TLD) is best left exclusive to Bonjour, and you'll want to establish your own DNS services in your own registered domain or (less desirably) in a completely bogus domain. Multicast DNS (mDNS, Bonjour) doesn't mix all that well with unicast (classic) DNS.

After upgrading to IOS5, iphone doesn't appear on Itunes, and i cann't transfer pjhotos on iphoto, .., after upgrading to IOS5, iphone doesn't appear on Itunes, and i cann't transfer pjhotos on iphoto, ..

after upgrading my iphone 4 to IOS5, it doesn't appear on "Itunes", and also i cann't transfer photos on "iphoto", .., so i cant load, save or erased anything now!

They are now in the videos app!

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

HT1382 i got an iPad and all my app's, music, and movies are on it, but when i try to download some apps to mi iPhone, they doesn't appear on the purchased tab, how could i move them back to itunes so i can access thru iCloud?

i got an iPad and all my app's, music, and movies are on it, but when i try to download some apps to mi iPhone, they doesn't appear on the purchased tab, how could i move them back to itunes so i can access thru iCloud? i have an 2nd generetion ipad and an iphone 5, thanks for you answers!

(I think the daughter got he better end of the deal!) I believe if you change the password and user id one of the devices it will stop that from occurring. But I'm not the one to tell you how to do it; someone like "Illaass" (Illaass seems to know how to correct / fix almost anything!) will know how if you don't. Just look for the "cat" icon.

Can't delete file from desktop. Can't get info. Doesn't appear in ls -a. What?

Hi folks,
I file has appeared on my desktop. I believe it's a temp file created while downloading something in Safari. When I try to delete it, I get "The item x can't be moved to the trash because it can't be deleted":
I tried right click > Get Info, and nothing happens (the info dialog does not appear).
I tried ls -al on my desktop, and the file doesn't appear in the list:
How do I get rid of this thing? What is it?

Weird. I guess if this were happening to me, I would see if the thing is still there after a reboot. If it is still there, I would boot with command-R and use Disk Utility to verify and repair the disk (not permissions).
The file name indicates you were downloading something to run under windows. Do you have windows?
charlie

TMS - CCMS Alert domain doesn't appear

Similar Messages

Maybe you are looking for