TMS conference control center does not populate Conductor Conferences

Hello,
We have just recently upgraded to conductors running 3.01 and all TPS to 4.1. TMS is running 14.5 with TMSPE on 1.3. After the upgrade to 3.01 TMS no longer sees any conferences managed by the conductors. Previously on 2.4.1 this worked without issue. All systems have been booted and had services restarted and yet we have nothing. All other conferences show, including our 8510, 8710 and regular point to point. Only conductor does not show. Anyone else have this happen?
Thanks,
Liam

I would rather not upgrade until TMS 14.6 is proven not to have major bugs (like 14.0 which caused a lot of havoc for me). I did no see requirements for 3.01 to be on 14.6 so this should all technically still work, at least by Cisco's documentation. In previous upgrades it took about a day for these conferences to come back so I did not think anything of it until I came back in this week and they still did not show. Since I have rebooted, restarted all services, verified that all versions are compatible and still nothing.

Similar Messages

Sybase Control Center Does not launch

Hi All,
Why Sybase Control Center on my PC does not launch (Internet Explore cannot display the webpage) ?
I checked at my service, Sybase Unified Agent already started.
Please help me ...

Typically it is because you have not set JRE_HOME or JAVA_HOME. Surce where the jave.exe or the jre.exe exists and add this to the environment.
Also we you are having these types of issues.......the best way to debug this is to open up a DOS window and run the "D:\Sybase\Shared\Sybase Central 6.0.0\win64\scjview.exe" executable from that directory. This way you can see the eeror being pushed out instead of having it flash to the screen.

My control center does not come up on my iPad

I Can't get my control center to appear on my iPad

YEs and yes and I have notifications turned on in settings..

Notification and Control Center does not show

Hi,
Sometimes (I don't know exactly under which circumstances) on my iPhone 4 (iOS 7.0.2), Notification and Control Center won't appear with swipe gestrue.
In this situation, When iPhone is locked and a notification (like message or phone call) arrives, the screen ALWAYS shows that notification and the screen is always on, until I arraive and lock it manually !! The second one is a serious problem beacuse after some hours the battery drops dramatically.
ONLY a reboot solves this probelm.
Is there any solution to this topic rather than reboot?

Same problem! I have a 4 though so maybe that's the problem? What iphone do you have?

The master site control file does not contain a component item for SMS_STATUS_MANAGER.

New to the System Center world. We are using a fresh install of Server 2012 R2 and System Center R2 with everything working until Server 2012 R2 Update 1 was installed. Now we are getting the following:
Site type: Primary Site or CAS SMS_STATUS_MANAGER
6/4/2014 1:35:21 PM 10996 (0x2AF4)
Resolved the "Status Manager" inbox to "C:\Program Files\Microsoft Configuration Manager\inboxes\statmgr.box\statmsgs".
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
Opened a change notification handle for directory "C:\Program Files\Microsoft Configuration Manager\inboxes\statmgr.box\statmsgs".
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
Resolved the "Site Control Manager (Master Site Control File)" inbox to "C:\Program Files\Microsoft Configuration Manager\inboxes\sitectrl.box".
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
Opened a change notification handle for directory "C:\Program Files\Microsoft Configuration Manager\inboxes\sitectrl.box".
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
Parsed the master site control file, serial number 1551209029.
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
This site is the central site. SMS_STATUS_MANAGER
6/4/2014 1:35:21 PM 10996 (0x2AF4)
ERROR: The master site control file does not contain a component item for SMS_STATUS_MANAGER.
SMS_STATUS_MANAGER 6/4/2014 1:35:21 PM
10996 (0x2AF4)
Sleeping for 60 seconds... SMS_STATUS_MANAGER
6/4/2014 1:35:21 PM 10996 (0x2AF4)
Any thoughts on how to fix this? Seen a few references to a "site reset" for SCCM 2007 but wanted to make sure there wasn't anything else to try before heading down that road with 2012R2.

A site reset can also be done in CM12 so it's worth a try.
Torsten Meringer | http://www.mssccmfaq.de

Notification center does not play sound when receiving notifications.

Why my new ipad Notification center does not play sound when receiving notifications.

Settings>Notifications .... Did you set up the various apps to receive notifications?
Do have system sounds muted?
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Profit Center does NOT exist on 08/24/2010 (Message KM700)

Hello,
I am using resource related billing.
I am adding a Contract Line Item to an existing contract.
In this Contract Line Item I am entering a wbs element for whichc the associated profit center has an effective date
of 01/01/2011.
The Contract Header has a document date of 08/24/2010
After entering the wbs element in the new contract line and hitting enter I receive the below warning message:
Profit center ###/##### does not exist for 08/24/2010
Message no. KM700
###/##### = Controlling Area/Profit Center
Is there a setting that can be switched off so that the warning is NOT displayed ?
Thanks
Ermanno.

If it is warning message, the user can leave as it is. If it is error then in t.code KE52, you can change the validity period by clicking the change validity period button. Change here validity period from date 08/24/2010, thereby you can avoid this message.
Does this answer your question? If not why you want to remove the warning message? It looks it is standard message, used by more than one program.
Regards,

K8T Neo - Core Center does not support your motherboard!

I installed the latest version of Core Center utility on Windows XP x64. But if I attempt to run it "Core Center does not support your motherboard!" is displayed. The download website clearly states that Windows XP x64 is supported. The message does not mention Windows XP x64 but the problem appears to have something to do with it because there is no problem on Windows XP x86.
Any suggestion is appreciated.

Quote from: Kaz Honjo on 02-September-07, 21:33:39
I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly.
"I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
Support list :
   MS-6570E,MS-6580(v5.0),MS-6585(v5.0),MS-6590(v2.0),
   MS-6702(v1.0,v2.0),MS-6702E,MS-6714(v5.0),MS-6728(v1.0,v2.0,v3.0),MS-6741,MS-6758(v1.0,v2.0),MS-6788(v1.0,v2.0),MS-6799,
MS-7003,MS-7008,MS-7021,MS-7025,MS-7028(v1.0,v2.0),MS-7030,MS-7031,MS-7032,MS-7033,MS-7037,MS-7043,MS-7047,MS-7052,MS-7053,MS-7058,MS-7066,MS-7088,
   MS-7100,MS-7125(v1.0,v3.0,v3.A),MS-7133,MS-7135,MS-7143(v2X),MS-7151,MS-7157,MS-7158,MS-7160,MS-7166,MS-7175,MS-7176(v1.0,v2.0),MS-7185,MS-7194
   MS-7203,MS-7220,MS-7226,MS-7235(v1.1),MS-7236(v1.0,v2.1,v2.2,v2.4),MS-7246,MS-7250(v1.0,v2.0),MS-7260,MS-7267(v2.1,v3.0,v3.1,v3.2),MS-7279(v1.0,v2.3),MS-7280
OS : Windows 98/Me/2000/XP32/XP64
Basically should work...
"I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly."
go to "Control", "Automatic Profile" and select the right senzor to be used.

DualCoreCenter error - "Dual Core Center does not support!"

Hi, just bought the insanely expensive MSI 8800 GTX Ulta OC (£457), which seems to ship with insanely cheap utilities.
I installed the Dual Core Center (after installing the 'latest' nvidia driver 158.22).
During the install, it insisted on a net framework 2 repair/uninstall for some unknown reason (I have net framework 2 and 3 installed - ie all latest xp patches) with no prior problems.
Anyway, I let it do the repair and install itself.
Now when I run the DualCoreCentre, it comes up with error msg: "Dual Core Center does not support!"
Can someone shed light on what that means please.
Thanks...

It means:
I suck, don't use me!
Stay away from MSI's utilities. If you want to overclock or control fan speeds or anything else.
Have a look through: here

Cluster does not populate in sub-vi unless front panel is opened

I have a sub-vi that saves my data to a database and the cluster
containing the data will not populate unless I open the front panel
when it executes. What could possibly cause this?

It is the readings cluster that does not populate. That is the input cluster for the vi. When I run in the development environment the program saves correctly without opening "Save Readings.vi". However after the complete program is compiled the data will not save unless "Save Readings.vi" is opened when it executes. I have attached the missing vis
Attachments:
Log SQL.vi ‏27 KB
Connect SQL Server.vi ‏48 KB
Update Process Info.vi ‏81 KB

HP Officejet Pro L7590 Printer - HP Solution Center does not work

I am not able to get the Solution Center suite to work because the installation has an error. I am using Windows 7 Home Premium. The printer I am installing is the HP Officejet Pro L7590.
If I go to Devices and Printers and add the printer. The driver Windows 7 driver would work, it would detect the printer and the test page and everything would be fine.
However, if I install using the software provided by HP for the L7590 it would result in an error and it would not work.
The failed driver installation is only from installing the full bundle software provided by HP, if by itself through Windows 7 it would be fine.
Because of the failed installation using HP software the HP solution center does not work.
In Devices and Printers, the printer has the yellow exclamation point requiring troubleshooting, I click on troubleshoot and no device drivers were found. In addition, I could not remove the printer. Before installing the HP software, I could successfully install the printer and there would be a green checkmark, and there would be an option to remove the printer. This leads me to believe HP has a faulty software bug that is causing the error.
I am suppose to use the HP add a printer shortcut that populated on my desktop after installing the software, the first time it would show the failure to successfully install the driver, afterwards it would not even detect my printer if it is plugged in. If I remove the usb and reinsert it, the Windows would just show the failed driver. I repeat, it failed after I install the software, it works fine without. The primary reason I want the software is to use the scanning feature.

Hello NickRT, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having software installation issues. i would like to try and assist you.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would reinstalling the HP Officejet Pro Full Feature Software and Driver.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Cost Center does not exist for a particular period - Solution

We have encountered an error in the subject,
COST CENTER does not exist for a particular period
Solution:
1) Either extend the Posting period for the invoicing date
2) Or enter the Cost Center as PO number in Sales Order
Please do add your comments if there are different ways to solve this error

The Post contains a solution

Step 3 in payment wizard does not populate any BP's?

Hi all-
We have a customer that is trying to run the payment wizard for outgoing payments. In Step 3 the payment wizard does not populate any BP's? We think we have all of the settings correct. Is there anything 'not obvious' that might prevent the vendors from populating on this step 3 (we choose all vendor groups and vendors DO have balances).
Any ideas as to where to look or what to check would be greatly appreciated.
Thanks Pat.

Hi Pat,
the most common reason for this is that no payment run defaults were selected. As for the definitions necessary, please have a look at note 725786 - Definitions necessary for the payment wizard.
All the best,
Kerstin

Control-clicking does not work in Finder

Ever since installing the 10.4.5 update, control-clicking does not work in Finder. When I try to do it, Finder automatically restarts itself. This happens in any Finder window and on the desktop itself. Whether I am control-clicking an Application icon or trying to 'Get Info' on a file, Finder restarts itself. I repaired permissions and it did not fix the problem.
Any idea on how to fix this? Thanks a lot!
David
Edit: Nevermind. I fixed it by deleting the JIMZip.plugin file in my Contexual Menu folder. I found the answer in another thread. I apologize for searching after I created this thread.

David,
Can you identify any corrupted or incompatible files in either your Macintosh HD/Library/Contextual Menu Items folder, or your Macintosh HD/Users/yourhomefolder/Library/Contextual Menu Items folder?
If so you may be able to uninstall/reinstall the associated application.
You may also consider temporary manual removal and isolation of the suspect file to verify CM functionality.
;~)

Control center will not work in apps since 8.2 .Works on the lock screen and on my iPad.

As I have already said above, the control center will not deploy in apps on my iPhone 6 since 8.2 It is turned on ,works on the lock screen and on my iPad. Any suggestions?

Check the Settings app to make sure the correct Setting is there to allow showing the Control Center in apps.
Settings > Control Center > Access Within Apps > ON

TMS conference control center does not populate Conductor Conferences

Similar Messages

Maybe you are looking for