TMS configration

Hi expert
I am sap BASIS admin last one year , I have no idead , how configre stms , we have Prodction server(prd-500) development server(dev-204) and Quality server(qty-300).
How will configre the TMS(Transport management system) , Please guide me .
thanks
with best regards
venkat

Hi,
first of all you decide which system you want to make domain controler (DEV or QAS or PRD) in configuration of TMS.
Than login in 000 client (which system you want to make domain controler.run STMS & click on
overview --->Transport routes -->
And than Configuration -> Standard configuration->Three system in landscape.
give their SID.
login on other system & run stms give domain controler name (Domain_SID)in Transp. Domain .
Accept this request in domain controler .And than click on system & run update configuration.
karan

Similar Messages

Warning message in Solman

Hi
We are getting Warning notification in solution manager saying ' The transport target is not the project transport target. Continue, or Cancel release and change transport target?
COuld you please throw some light on what this Warning is all about and why its been shown suddenly in our Solution Manager system.
Does it has anything to do with the TMS configration that we do after system refresh as post refresh activity?
regards,
Vinodh.

I had this problem too after Solution Manager upgrade to 7.0 EHP 1. Can someone tell me what is this warning?
Thanks,
Antonello

Error generated while transporting a request using TMS

Dear Techies,
While transporting a request iam getting an error message
"Transport control program tp ended with error code 0247"
Errors: add to buffer has problems with data- and/or cofile
Iam not getting any information to resolve the problem. Further In devlopment system iam unable to see the old requests and also new one whcih i have created and released. I tried adding the request manually in TMS, whcih resulted in the above mentioned error.Please suggest some solution

are you able see the objects when you are expanding the request/task
Also please check the followings & let us know the result
1. Goto transaction STMS. Menu verview -> Systems. Select system and Menu Check --> All available option
2. Goto transaction STMS. Menu verview -> Transport Routes, Menu Configuration --> Check --> All option
One more thing are you facing this problem with only for one specific request or for all requests
Edited by: Mrinal Das on Jan 5, 2011 3:10 PM

TMS has lost connection with VCS

I've enforced group policies since adding TMS to a domain and now my TMS isn't getting a https response from the VCS. Any ideas?
Gives the error "Configuration conflict - A domain is in use by the OCS Relay application that has not been configured on the VCS"

Lenchmob-
Try unplugging the WiFi router for a few seconds.
Fred

Jabber client using local TMS/VCS account

I have TMS configured for both AD and local accounts for Jabber accounts. Once I added the AD accounts i could no longer authenticate using the local accounts. Is there a way to use both local and AD authencation for jabber?
Thanks
RB

Thanks for the response.
You are correct. The error occurs over time after a user has logged into the client. We've had a variety of issues with with out VCS/TMS/Jabber deployment so it's hard to pinpoint exactly when this started to occur, but it was working at one point. If i recall corrrectly, this started to crop up after we had to rebuild our provisioning database after an OpenDS failure on the TMS server. TMS agent diagnostics (both local and for VCSc) complete without error currently. The error received by a client when searching for an entry that is known to exist is 'no exact match in phonebook'. Here is a screenshot of all settings we are currently provisioning.....

Program does not create PCP0 documents for TMS Idocs

Hi All,
We have a dialy job that will catch up all payroll/tms idocs that is being received by the system. The program will automatically creates a document in the tcode PCP0 for every idocs that it has gathered both Idocs that have no errors and Idocs that have errors. Would like to ask if you have experienced the cause of this?
Regards,
S. T.

Hi wyo3witt,
I checked your account and saw that your subscription had been canceled, but that you hadn't been refunded yet. I processed a refund for you (transaction ID 0066152640); you see it in your account in 2-3 days.
Best,
Sara

Sale order change problem.-Variant configration

Dear All,
After sale order configration and material transfered to sale order stock , then when i trying to change mode in sale order i am getting the error "Internal error in communication between configuration and sales doc.GET_CONFIG_MODE"
Please give the correct solution above problem
Regards
SVR
Edited by: sunitha p on Apr 30, 2008 9:24 AM

closed

:-) How to schedule the TMS Job ? ( I don't have the "orange truck" icon)

Hi All,
In the STMS txn, I'd like to shedule the TMS import job, but :
1- I'don't have the truck icon.
2- On which environement do u shedule it ( source or target ? )
Thx a lot,
Erwan

Hai,
Check the below link to enable/disable Import all option in STMS.
http://www.sap-img.com/bc002.htm
http://help.sap.com/saphelp_sm32/helpdata/en/5c/d21880fe3c11d2b461006094b9ea64/frameset.htm
Regards,
Yoganand.V

Error Message from VM TMS 13.0

Dear all,
We have receive some error message from the VM TMS 13.0, that is installed a month ago.
<ErrorCode 1000>
Message="Faulting application name: TMSSNMPService.exe, version: 1.0.4008.29206, time stamp: 0x4d12159c Faulting module name: mscorlib.ni.dll, version: 4.0.30319.18444, time stamp: 0x52717d7e Exception code: 0xc0000005 Fault offset: 0x0000000000cd5bf7 Faulting process id: 0x116c Faulting application start time: 0x01cf68076319516f Faulting application path: C:\\Program Files (x86)\\TANDBERG\\TMS\\Services\\TMSSNMPService.exeFaulting module path: C:\\Windows\\assembly\\NativeImages_v4.0.30319_64\\mscorlib\\abf62e6545d2802fc60286678a67e6bf\\mscorlib.ni.dll Report Id: 371654ff-d3fb-11e3-98ea-005056b1027a"
<ErrorCode 1026>
Message="Application: TMSSNMPService.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.AccessViolationException Stack: at System.Runtime.InteropServices.Marshal.ReadInt64(IntPtr, Int32) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.VbToObject(Tandberg.CommLib.SnmpLib.WinSnmp.SMIVALUE ByRef) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.VblToHashtable(IntPtr) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.OnSnmpMessage(IntPtr, IntPtr, Int32, UInt32, UInt32, IntPtr)"
<ErrorCode 7031>
Message="The TMSSnmpService service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds:
Any comments on the above error?
Best Regards,
Ben Lai

This seems to be happening on 14.2.2 as well.
Component: Application Error
Severity: Warning
Event class: /App/Failed
Device class: /Server/Windows/WMI/TMS
Systems: None
Summary: Faulting application name: wmiprvse.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc794
Faulting module name: ole32.dll, version: 6.1.7600.16624, time stamp: 0x4c2984e3
Exception code: 0xc0000005
Fault offset: 0x00000000000393a9
Faulting process id:
Message:
Faulting application name: wmiprvse.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc794
Faulting module name: ole32.dll, version: 6.1.7600.16624, time stamp: 0x4c2984e3
Exception code: 0xc0000005
Fault offset: 0x00000000000393a9
Faulting process id: 0x39c4
Faulting application start time: 0x01d04d36eb9b6c36
Faulting application path: C:\Windows\system32\wbem\wmiprvse.exe
Faulting module path: C:\Windows\system32\ole32.dll
Report Id: e334bd6f-b990-11e4-aa1d-842b2b6be310
http://tools.cisco.com/security/center/viewAlert.x?alertId=29142

Error while configuring TMS in SAP (3 system Landscape)

Hi,
We need to replace our quality server with a new one.While configuring TMS,with the new replacement of our quality server,we are facing an error.
Our development server is the domain controller and we have added our new QA and then deleted the old system and previous TMS configuration.But after deleting the configuration in our Production also,we get an error while adding it in the landscape.
Password should contain atleast 2 numericals(0-9) for TMSADM.We changed and tried but of no use.
Our password is welcome@01 which goes as per the password exception table.
Can anyone help us in resolving this issue.Do we need to change the parameters and restart the system?Or is there any resolution like unlocking any table etc.
Please help.Early response would be of great help as our landscape is affected.
Regards,
Sudheer.

Hi Sudheer,
Make sure the client id open
in client other than 000 open table TMSCROUTE using SE11 and create following entry.
sysname = ,ADMPWD
Routestring=USER
save the entry then try to configure STMS in 000.
Try to add the Entry in All 3 Systems.
Also Refer Note 1568362 - TMSADM password change
Regards,
Vaibhav

TMS error: "Offline Call could not access file as supposed (see.."

i am running an NSP Netweaver on top of Windows 7. when performing RSTPTEST, I get the following error, right at the end. All the other tests are fine.
It looks like an permissions problem with possibly the file system, but i have tried giving all to all.
I have been trying for days to fix this.
if anyone can help, please do.
i have checked log files, and about the only useful one is the SLOG1019 which gives me one line
FATAL No stdout redirectio NSP 0000 20100510080609 BCUSER pc
when i try to distribute the TMS i also get "Transport control program tp ended with error code 0212" again, looks like an authorization error.
i am not a basis person, more developer.
any pointers and help, cheers
Edited by: gingle on May 10, 2010 8:13 AM

Hi gingle,
Meaning of returncode 212 is:
could not access file as supposed (see SLOG for more details)
Is there any error in the corresponding SLOG?
You can find the SLOGxxxx.<SID> under usr/sap/trans/log.
Best Regards
Julia

Setting up of TMS from Quality to Production systems

Hi ALL,
I have a query:
I have to setup the TMS in such a way that the transports from Client 110 of Quality server should ONLY go to Client 110 of Production server.
Similarly for client 120 of quality -> client 120 of Production.
Please be so kind to advice and help with detailed steps.
Rgs
Ipsita.

Hi Ipsita Guin
you create a route via Tcode STMS_PATH and create route Quality to Production.Logon Client 000 configure transport route.Now u can u define u r server
name.
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/94fc3f8fc2c542e10000000a1550b0/frameset.htm
Thanks & Regards
Pankaj Kumar

TMS 14.3.2 - No HTTPS Response from devices (again) - Looks like permissions issues (but possibly down to NetBIOS over TCP/IP)

Hi All,
Sometime ago I posted regarding an issue I was seeing on our TMS , where most of the remote devices seemingly showed up as loosing remote connection (no HTTPS Response - https://supportforums.cisco.com/discussion/12290956/tms-lost-https-communciation-devices-not-really). However, I could not figure out the root cause of the error, and now I have managed to break things again - probably due to a Java upgrade which broke TMSPE (see https://supportforums.cisco.com/discussion/12404166/looks-latest-update-java-8-update-31-will-break-tmspe-11).
However, I thought I would look at little more closely this time to see if I could figure out the problem.
I am seeing a lot of entries in the Security Log in TMS that seem to indicated that my the account used from a TMSPE connection has a bad or invalid password (this is set in "Administrative Tools --> Configuration --> Provisioning Extension Settings", but this password is correct (I can log into TMS with this account, and reset and restarted services etc).
The computer attempted to validate the credentials for an account.
Authentication Package: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0
Logon Account: tmspeconnect
Source Workstation: TMS
Error Code: 0xc0000064
and
An account failed to log on.
Subject:
Security ID: IIS APPPOOL\TMSNet40AppPool
Account Name: TMSNet40AppPool
Account Domain: IIS APPPOOL
Logon ID: 0x214b6
Logon Type: 8
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: tmspeconnect
Account Domain: TMS
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc0000064
Process Information:
Caller Process ID: 0x860
Caller Process Name: C:\Windows\SysWOW64\inetsrv\w3wp.exe
Network Information:
Workstation Name: TMS
Source Network Address: 127.0.0.1
Source Port: 62114
Detailed Authentication Information:
Logon Process: Advapi
Authentication Package: Negotiate
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
I just wanted to check this like file/folder NTFS permissions, or any specific IIS permission . Is there a list of NTFS folder permissions for which the TMS required with regard to the "IIS APPPOOL", and perhaps what may need to be check in IIS?
Oddly, the error list above refers the our "TMSPEConnect" account from the TMS domain, however this is incorrect - TMS is the machine name. Still we ARE seeing similar error which reference the actual domain name, such as:
An account failed to log on.
Subject:
Security ID: IIS APPPOOL\TMSNet40AppPool
Account Name: TMSNet40AppPool
Account Domain: IIS APPPOOL
Logon ID: 0x49e55
Logon Type: 8
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: tmspeconnect
Account Domain: mydomain
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc000006a
Process Information:
Caller Process ID: 0xb18
Caller Process Name: C:\Windows\SysWOW64\inetsrv\w3wp.exe
Network Information:
Workstation Name: TMS
Source Network Address: 1.1.1.1 (changed external IP)
Source Port: 47620
Detailed Authentication Information:
Logon Process: Advapi
Authentication Package: Negotiate
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Idea welcome.
Cheers
Chris

Hi all,
After a long a fraught weekend trying to fix things, I am not that much further on, but I am beginning to understand what it isn't........ I think :(
It looks as though the "DatabaseScanning" service, or anything that runs under the credentials of the "nt authority\network service" seems to have a problem.
The Audit log show lot of entries where services such as"TMSWebPublic" running under the ISS Application pool "tmsnet40apppool", and actions launched under our own credential appear to communicate just fine with the device, only for the 'network service' to time out the connection a short while later. The same goes for some (not all) of the Phone book updates, which also looks as though it runs under the credentials of the 'Network Service' account.
26/01/2015 08:30:54
nt authority\network service
Update
System
our-ctrl1
System status
NoResponse
TMSDatabaseScannerService
26/01/2015 08:30:54
nt authority\network service
Update
System
our-ctrl1
Connection status
NoHTTPSResponse
TMSDatabaseScannerService
26/01/2015 08:29:06
tmsnet40apppool
Update
System
our-ctr1l
System status
Idle
TMSWebPublic
26/01/2015 08:29:06
tmsnet40apppool
Update
System
our-ctrl1
Connection status
OK
TMSWebPublic
However, I still don't know at this point is this is related to the actual TMS front end, something to do with the domain and policies that have been applied to TMS, or the actual database, or even just communication with the back end database??? I did try running the services under a domain user (service) account, but then ran into other issues as I couldn't log into TMS.
BTW, removing TMS, and IIS and reinstalling did fix my second issue relating to the 'Communication Errors'.
Chris

Transport Request as Per TMS in XI 3.0's Post Installation

Hi Everybody !!
..I have completed cinst, dbinst, client copy, jinst, xinst installation for XI 3.0 INSTALLAION ON ABAP + JAVA.
SAP_BW , SAP_BASIS, SAP_ABAP and PI_BASIS Patches have been applied. I am doing the XI Post Installation Steps and for that as per the Post Installation Steps' Guide, I need to perform SAP XI customizing... I am done till the stage of using tr code SWF_XI_CUSTOMISING to perform the basic
customising of SAP XI. But, after entering prefix no. higher than 900 for the new user with 'local object' selection... I have confusion for the following instruction :
" You need to enter a transport request according to your transport management system ( TMS ) and choose Save again.."
I don't see any tms button or any menu option and hence, have no idea how to enter a transport request and where to enter that request...
I sincerely aprreciate the help provided and just for the record, I never fail to assign points for helpful answeres..
Thanks in Advance Again..
Regards..
-Rupen Patel

Hi Rupen,
You just have to make sure that nodes Maintain Runtime Environment and Maintain Definition Environment have green hook (not a red cross) after all the customizing done in transaction SWF_XI_CUSTOMIZING.
The instruction "You need to enter a transport request according to your transport management system ( TMS ) and choose Save again" is not so much important as it is just an informative instruction. Even i don't remember doing such a task and my XI environment is working perfectly fine.
Regards,
Abhishek

How to configure TMS for ChaRM with Customizing routes?

Hi Experts,
We have succesfully configured three system landscape TMS for ChaRM for several pipelines already. Now we are facing a situation where TMS is as follows:
DEV to QAS contains routes:
Customizing: ZEBP => 100
Transport: ZDEV => 100
Customizing: ZSUS => 200
Transport: SAP => 100
The question with these is how to add ZEBP and ZSUS to ChaRM configuration?
QAS to PRD:
Delivery: 200 => 200
Delivery: 100 => 100
Here the question is how to enable transports between 200s alongside 100?
When looking at SMSY in SolMan, SUS is a logical system only.
Has anyone of you come across a situation like this? I'm glad for any hints you may give me!
Our SolMan is 4.0 SP13.
Best Regards,
Auli

Hi
in my opinion you can configure it the following way:
Customizing: ZEBP => 100
Transport: ZEBP => 100 (not ZDEV)
Customizing: ZSUS => 200
Transport: SAP => 100
Then assign ZEBP as default transport layer for client 100 and ZSUS for client 200.
It is not possible to configure ZEBP and ZDEV for client 100 if you want to use charm
regards, Andy

TMS configration

Similar Messages

Maybe you are looking for