TMS configuration error
Hi All,
While configuraing TMS ,we have made development system as a domain controller.
When we tested the connection from development system its okay but while testing the connection from Production system we are getting Communication failure error.
We checked the RFC [email protected]_DEV in T-code sm59 its also throwing the communication error.
Both system have different transport directory.
Exact error -:
RFC communication errpr with system/destination [email protected]_DEV connection to host DEV(dev server) service sapgw01 timed out
/CPI-C error CM_Product_specific_error.
waiting for your reply.
Thanks,
Prashant.
Hi Srinivasa,
RFC communications error with system/destination [email protected]_PRD connection to host ibs-devp, service sapgw00 timed out /CPI-C error CM_PRODUCT_SPECIFIC_ERROR.
cause : move SAP server to new Server that change IP Address (not change host name)
solution :
1) Check the RFC connections for TMS in SM59. Do a connection test
This message will be displayed :
1. [email protected]_PRD : connect fail show message connection to host..
2. [email protected]_PRD : <error is same as DEV>
3. [email protected]_PRD : connect it OK.
2) Go to SM51 > Refresh Host Name Buffer (stores the IP address)
Thanks & Regards,
Prashant.
Similar Messages
-
Error in STMS - The TMS configuration is inconsistent
Hi gurus,
Yesterday I installed the SAP Solution Manager 7.0 SP14 with S.O. Win 2003 server and D.B. Oracle 10.2.0.4 version.
When I tried to configure the STMS I´m facing with a problem... the system send me a error "The TMS configuration is inconsistent" and when I open the error details it show me a information "tp configuration note completely distributed"... I search a lot to find a valid solution for this and I don´t have sucess, I don´t achieve a answer / suggest that solve this error...
Please give your suggestion to resolve this issue as snow as possible.
Thanks in advance
Best regards,
João Dimas - PortugalHi,
Please check the Note 1144208 - TMS Tendering: Inconsistent tendering template
Settings under the Transport Management System do follow the steps.
All the below settings has to be done in satellite system not solution manager
1. Define Transport Routes for System Landscape
Go to Transaction STMS
Choose Overview -> Systems.
Double-click each system.
The Display TMS Configuration: System <system ID> screen appears.
Select the Transport Tool tab page.
If the entry CTC does not appear in the Parameters column, enter it there, and then in the Value column, enter 1.
Save your entries.
Configure Transport Strategy
Go to Stms Transaction
Go to Menu Overview Transport Route
Doule click on Each System
In the Transport strategy group box, select Single transports
(since only Import Single and Import Project All are used).
In the Quality assurance group box, deselect Delivery after confirmation
1. Choose Continue.
Activate TMS Trusted Services
Go to Stms Transaction
Choose Overview -> Systems.
Choose Goto -> Transport domain.
In Management Tab
In Security Options group box
Click on Trusted Services Active
Go to QA Approval Procedure
You should not assign any QA approval system there
Save your Entries
Call Transaction STMS.
Choose Overview Systems. The system overview appears.
Choose SAP System Create Domain link.
The dialog box Request for Linking 2 Domains appears.
Enter the system name, host name and system number of the domain controller you want to link to, and then confirm your entries.
Your SAP System performs the following actions automatically:
o Generates the required RFC destinations.
o Sends the address data of the controller to the controller in the other domain.
You can now see that you have requested the domain link to the other domain in the system overview.
Click the Distribute and Activate TMS Configuration ICON on the Application Toolbar
After that Go to SAP System Check Connection Test, transport directory and transport tool
Check all once whether it is having inconsistency.
4.Check Configuration of Transport Domain
Log on to every domain controller that is connected to your transport landscape.
Call transaction STMS
Apart from the information "You are logged onto the domain controller", you should not be able to see other messages or warnings.
Generate RFC Destinations to Client 000
Call Transaction SMSY.
Go To Landscape Components
Go to your Satellite System
Click on the Domain Controller System
In the Right side Tab strip, Click on the Clients, Select 000 client Click on RFC generate Button
Give the User name for Read Access and Change Manager
Click the OK Button to Continue
Add Import Authorization to Operator/Administrator
Make sure that the operator and administrator users in client 000 of the target systems have the same name as their user in the Solution Manager system.
Assign import authorization to the operator and administrator users in client 000 of the target systems (SAP_CHANGEMAN_OPERATOR and SAP_CHANGEMAN_ADMIN roles).
Regards
Sreedhar Reddy -
I am getting a error msg that The TMS configuration is inconsistent
hi everybody, can anyone tell me that how to do the configuration in STMS tcode, i trying to transport the release req but i am getting an error that The "TMS configuration is inconsistent". can any help out in this.....
Moderator message: a topic for "Netweaver Administrator", but please (re)search yourself before asking there.
Edited by: Thomas Zloch on Jul 15, 2010 12:52 PMWhat is the file type?
-
TMS Configuration problem - SET_CODEPAGE_FAILED
I have just installed a new system "CRM 7.0/NW 7.01". The first thing I am doing is configuring TMS in client 000. When I try to distribute the configuration I get an error: TMS Configuration could not start transport control program TP. SET_CODEPAGE_FAILED.
I looked at all the previous posts and have done all the prework: ENV variable dbms_type = ora and I upgraded the kernel to current.
In TMS I don't get an error when I check the connection or when I check the transport directory. It only happens when I check the transport tool. Here is the error message from the dev logs:
Trace file opened at 20110210 131154 Eastern Standard Time, SAP-REL 701,0,125 RFC-VER U 3 1215400 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
ABAP Programm: SAPLSTPA (Transaction: SPAM)
Called function module: RFC_TP_INTERFACE_VERSION
User: PREED (Client: 000)
Destination: CALLTP_WindowsNT (handle: 3, 64588453, {254135E0-9A35-F1B2-8C05-0013724E7C66})
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3348
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1829
Thu Feb 10 13:11:14 2011
ERROR => GwISearchPartner: timeout, partner LU: >SITASERV44<, TP: >C:\usr\sap\CR3\DVEBMGS00\exe\tp.EXE< [gwr3cpic.c 6349]
ERROR => GwISearchPartner: HOST: SITASERV44, conv ID: 64555875 [gwr3cpic.c 6362]
Thank you for your assistance.
PeggyI copied the wrong dev_rfc log:
Trace file opened at 20110210 130049 Eastern Standard Time, SAP-REL 701,0,125 RFC-VER U 3 1215400 MT-SL
======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
ABAP Programm: SAPLSTPA (Transaction: )
Called function module: RFC_TP_INTERFACE_VERSION
User: TMSADM (Client: 000)
Destination: CALLTP_WindowsNT (handle: 3, 63913828, {953F35E0-66FD-F1C8-8C05-0013724E7C66})
SERVER> RFC Server Session (handle: 1, 63911750, {983F35E0-5E6B-F160-8C05-0013724E7C66})
SERVER> Caller host:
SERVER> Caller transaction code: STMS (Caller Program: SAPLTMSC)
SERVER> Called function module: TMS_CI_START_SERVICE
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3348
CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
Timeout during connection setup (check that partner exists)
Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1829 -
I am trying to update TMS confiuratuon of our QA system from transport domain controller and i am getting following message,
Please help,
No distribution processes active
Message no. XT072
Diagnosis
To distribute the TMS configuration to the individual systems, one process is started in the background for each system.
No process of this type is currently active.Thanks for your reply
Yes, I tried from 000 with DDIC, Here is detail information
Trans_DIR setting in instance profile is
Parameter val.:
$(SAPTRANSHOST)
Unsubstituted standard value:
$(SAPTRANSHOST)\sapmnt\trans
Substituted standard value:
wlapphr1\trans$\sapmnt\trans
( if I put
wlapphr1\trans or $(SAPTRANSHOST)\sapmnt\trans , it cannot recognize, I found in the domain controller
wlapphr1\trans is shared sepreretely , I donot know why
wlapphr1\trans is shared sepreretely and can be connect as
wlapphr1\trans$ from target )
I am wondering why it is showing Substituted standard value:
\wlapphr1\trans$\sapmnt\trans
In STMS setting TRANSDIR =
wlapphr1\trans ( as trans is shared seperately )
Here is the message when i check the TMS configuration of QA system from the Domain controller
This is tp version 340.16.41 (release 640, unicode enabled)
I am getting following error message while opening the transport Queue,
I have also checked the STMS , which looks fine, please help
E-
wlapphr1\trans$\sapmnt\trans\bin\TP_DOMAIN_HRP.PFL could not be
opened
EXIT
ERROR:
System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in
wlapphr1\trans$\sapmnt\trans\bin\TP_DOMAIN_HRP.PFL: transdir
not set
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208 -
Transport domain configuration error
Hi,
We have made a homogeneous system copy of our R/3 production system to create a test system.
The copy has the same SID as the source system and is installed as a local system rather than a domain - this is a Windows environment. The source system is the domain controller for the transport domain.
I have run SE06 in the copied system and am now trying to reconfigure STMS to set it up as a single system in it's own domain.
However, when I go into t/action STMS I am prompted to join the production domain - which I didn't expect, so I select Other configuration and enter appropriate values there but am getting error:-
Local TMS configuration is inconsistent in N3P
Message number XT 123
Can anybody advise how to resolve this?
Regards
Richard1. Did you follow changing SID name and post database copy steps at database level first?
2. If you have done above, I hope you have deleted existing Transport configuration from SE06. If you haven't pls do.
3. Then, At transport domain controller, please remove this system ( if this system existed earlier)
4. Now, try joining domain.
It should work!
K -
Local TMS configuration inconsistent in sid
hi,
i am facing this problem while using tms
"Local TMS configuration inconsistent in sid"
can u pls help meat first, the TMS domain is running good.
I delete the TMS configuation in DEV client 000 before delete QAS system in this domain, and then i try to reconfig TMS domain in DEV, when i try to join QAS to the domain, I got the error message "Local TMS configuration inconsistent in QAS", details information:
=============================================================
System QAS Command TMS_MGR_CONFIGURE_CLIENT
Client 000 Service Communication Interface
User TMSADM Start Online
Date 2011-05-23 Function TMS_CI_START_SERVICE
Time 11:12:40 Message INVALID_LOCAL_CONF
Local TMS configuration inconsistent in QAS
tms_not configured
=============================================================
and i try to update and distrubut the domain configuation in Domain controller(DEV) according the online help, and I try to post installation both in DEV and QAS, but still no effected of all. -
How do I fix a Configuration Error on MacBook Pro?
I have a MacBook Pro 2.4 GHz Intel Core i5 with 8 gigs of memory. I was running CS6 and my video board went out. I got it fixed but lost all my data on my hard drive. So I tried installing cs6 from a disk image that I had saved and after entering the serial code I received that my license was revoked. That could be true since I was at another company when I purchased it. Now I'm trying out the TRIAL Adobe cloud solution and after installing and getting updates, when i clicked on the app I get a configuration error when trying to open the . Do I need to delete some library items that are conflicting when I tried to install CS6?
Here is the error:
A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
Error: 213:5Imjoewalkerid the file permissions on your SLStore folder have become compromised. Please see Configuration error 16 | CC, CS for information on how to resolve Error 213:5.
-
Configuration Error 213:19 Adobe PhotoShop CC when sequenced using Microsoft App-V 5.0
Does anyone out there have a Microsoft App-V 5.0 recipe for Adobe PhotoShop CC ?
When I run the App-V package, I get the License Configuration Error 213:19
Thank You. very much for your time. KarlYou will probably get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll -
Configuration error when open admin tool in BIEE 11g client
Hi All,
I have installed BIEE 11g client in my laptop,the version is 11.1.6.2 ,it has show one error in the installation log :
<action name="Custom Action" target="oracle.bi.CustomIAActionGetInstanceNumber" status="error">
- <AdditionalNotes>
<error>class oracle.bi.CustomIAActionGetInstanceNumber.install() runtime exception:</error>
</AdditionalNotes>
After installation,when I try to open the admin tool in start menu,it show configuration error , but I can open the admin tool through installation directory.
And when I try to import metadata,it also shows connection has failed.
Can any body give some helps on this,thanks a lot.
Ryan.
Edited by: 997662 on Apr 5, 2013 1:39 AMHi,
Let me know which version you are using (OBIEE) ?
you are trying to install Client (Admin Tool) and OBIEE server in same machine ?
Thx, -
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support -
Report Viewer Configuration Error
Hi,
I manage a TFS 2010 Server that makes heavy use of Reporting Services, and I have a user that reported the following error
when attempting to open a report in the Microsoft Visual Studio Report Viewer:
Report Viewer Configuration Error
The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Resevred.ReportViewerWebControl.xsd" type = "Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer,
Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*"
path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer, Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.webServer/handlers section for
Internet Information Services 7 or later.
Has anyone seen this error before, or have any advice on finding a solution?
Thank you.Hi HealthServices3300,
You can try to install "Microsoft Report Viewer 2010 Redistributable Package" on your server to check if it works for you.
For the web.config info, it's for web application. And I'd like to know how did you create the report, and whether the report is for a web app or reporting service. From the error message and report, seems it's not a TFS issue. If it's SSRS project
issue, please post this issue to
this forum. If it's a report viewer control issue, you can post this issue in
this forum for a professional response. After that, please update this thread with the new thread link. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
SQL Server Reporting Services Configuration Error(Subscription)
I have just deployed a new project on the server and i can successfully run report from the BI Site; [Server Name]\Reports and no issue there. But when i try to create Subscription for the same report; I am trying File Share and it throws error as given
below. Do i have to configure anything for subscription in the Reporting Services Configuration Tool???
I also have few questions regarding Configuration;
What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
Here is the error I am getting in the log file..
ReportingServicesService!library!b!06/17/2010-09:35:04:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for
more information., AuthzInitializeContextFromSid: Win32 error: 110;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
ReportingServicesService!library!b!06/17/2010-09:35:04:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties.
ReportingServicesService!subscription!b!06/17/2010-09:35:04:: Microsoft.ReportingServices.Diagnostics.Utilities.RSException: The report server has encountered a configuration error. See the report server log files for more information. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
at Microsoft.ReportingServices.Authorization.Native.GetAuthzContextForUser(IntPtr userSid)
at Microsoft.ReportingServices.Authorization.Native.IsAdmin(String userName)
at Microsoft.ReportingServices.Authorization.WindowsAuthorization.IsAdmin(String userName, IntPtr userToken)
at Microsoft.ReportingServices.Authorization.WindowsAuthorization.CheckAccess(String userName, IntPtr userToken, Byte[] secDesc, ReportOperation requiredOperation)
at Microsoft.ReportingServices.Library.Security.CheckAccess(ItemType catItemType, Byte[] secDesc, ReportOperation rptOper)
at Microsoft.ReportingServices.Library.RSService._GetReportParameterDefinitionFromCatalog(CatalogItemContext reportContext, String historyID, Boolean forRendering, Guid& reportID, Int32& executionOption, String& savedParametersXml,
ReportSnapshot& compiledDefinition, ReportSnapshot& snapshotData, Guid& linkID, DateTime& historyOrSnapshotDate, Byte[]& secDesc)
at Microsoft.ReportingServices.Library.RSService._GetReportParameters(ClientRequest session, String report, String historyID, Boolean forRendering, NameValueCollection values, DatasourceCredentialsCollection credentials)
at Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters)
at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames)
at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute()
at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]&
secondaryStreamNames)
at Microsoft.ReportingServices.Library.ReportImpl.Render(String renderFormat, String deviceInfo)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.SaveReport(Notification notification, SubscriptionData data)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.Deliver(Notification notification)
I also get following error when I try to create email Subscriptoin
w3wp!processing!6!6/17/2010-09:58:53:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'. ---> System.Data.SqlClient.SqlException: Could not obtain information about Windows NT group/user 'THRY\RPUser',
error code 0x6e.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.ImpersonateUser()
at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.Open()
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.ReportRuntimeDataSourceNode.OpenConnection(DataSource dataSourceObj, ReportProcessingContext pc)
--- End of inner exception stack trace ---
Thanks,
RPHi RP,
For your first issue "cannpt create subscriptions", after analyzing the error logs, it seems to be caused to the service account for the Reporting Services service does not have proper permissions to invoke the WIN32 API.
The SQL Server Reporting Services invokes the Win32 API to impersonate user's permissions to write files to shared folder or call COM+ components.
In this case, we can change the service account to a account has permissions to invoke the Win32 API to solve the issue. For example, we can change the account to be NetworkService or LocalSystem:
1. Backup the encryption key using Reporting Serivces Configuration Manager.
2. Change the service account using Reporting Serivces Configuration Manager.
3. Restore the encryptiong key using Reporting Serivces Configuration Manager.
For your others questions, please see the following inline reply:
--What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
The account should be a Windows account or the SQL Server account, that has read permissions in the source data base at least.
--What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
The account must be a Windows user account. For best results, choose an account that has read permissions and network logon permissions to support connections to other computers. It must have read permissions on any external image or data file that you
want to use in a report. Do not specify a local account unless all report data sources and external images are stored on the report server computer. Use the account only for unattended report processing.
--What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
You are right. It must be a Windows account, which has permissions to access and write files to the shared folder.
For more information, please see:
Configuring the Report Server Service Account:
http://msdn.microsoft.com/en-us/library/ms160340.aspx
Execution Account (Reporting Services Configuration):
http://msdn.microsoft.com/en-us/library/ms181156.aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT -
Hi, My laptop containing Adobe CS5 recently crashed. I do not have the serial as this was activated at my school and they only do it once for everyone. What I did was to take the HDD out and put it onto my PC and try to use the application from there, a method which worked before on other applications, but when I wanted to load up dreamweaver and any other applications in the suite it failed to load and popped out the following message:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Configuration Error
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of the screen.
Error:6
http://www.adobe.com/support/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Can anyone help me out? I don't have the serials nor the CD to reinstall so I'm practically stuck and I cant afford to buy the thing again.Adobe applications simply don't work that way. Installation puts software and configuration information not only in application-specific directories under \program files\, but also in system directories. As such, Adobe application installations are not portable.
Unfortunately, in order to re-install your software, you will need to go back to your “school” for installation media and serial number information since the software was licensed through them and not directly via Adobe.
- Dov -
Hello All,
Wish You Happy New Year to All in advance.
while accessing the share point site i got the error message
Server Error in '/' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: The element <forms> may only appear once in this section.
Source Error:
Line 104: <!--<forms loginUrl="/_layouts/log-in.aspx" />-->
Line 105: <forms loginUrl="/_layouts/log-in.aspx" />
Line 106: <forms loginUrl="/_layouts/log-in.aspx" />
Line 107: <forms loginUrl="/_layouts/log-in.aspx" />
Line 108: </authentication>
Source File: C:\Inetpub\wwwroot\wss\VirtualDirectories\4545\web.config Line:
106
Version Information: Microsoft .NET Framework Version:2.0.50727.3662; ASP.NET Version:2.0.50727.3658
i have found event message in the event log
Event code: 3008
Event message: A configuration error has occurred.
Event ID: 523cefee6a0943948cf01b4e9f476fff
Event sequence: 77
Event occurrence: 76
Event detail code: 0
Exception information:
Exception type: ConfigurationErrorsException
Exception message: The element <forms> may only appear once in this section. (C:\Inetpub\wwwroot\wss\VirtualDirectories\4545\web.config line 106)
Request information:
Request URL: http://beesppesxapp70:4545/_vti_bin/sitedata.asmx
Request path: /_vti_bin/sitedata.asmx
User host address: 172.16.20.80
User:
Is authenticated: False
Authentication Type:
Thread account name: abc\wss_setup
Thread information:
Thread ID: 1
Thread account name: abc\wss_setup
Is impersonating: False
Stack trace: at System.Configuration.BaseConfigurationRecord.EvaluateOne(String[] keys, SectionInput input, Boolean isTrusted, FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult)
at System.Configuration.BaseConfigurationRecord.Evaluate(FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult, Boolean getLkg, Boolean getRuntimeObject, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
at System.Web.Configuration.RuntimeConfig.GetSectionObject(String sectionName)
at System.Web.Configuration.RuntimeConfig.GetSection(String sectionName, Type type, ResultsIndex index)
at System.Web.Configuration.RuntimeConfig.get_Authentication()
at System.Web.Security.FormsAuthenticationModule.Init(HttpApplication app)
at System.Web.HttpApplication.InitModulesCommon()
at System.Web.HttpApplication.InitInternal(HttpContext context, HttpApplicationState state, MethodInfo[] handlers)
at System.Web.HttpApplicationFactory.GetNormalApplicationInstance(HttpContext context)
at System.Web.HttpApplicationFactory.GetApplicationInstance(HttpContext context)
at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
kindly advise me
Thank a lot in advanceHi,
As per the error logs it seems you have the Form element twice in your web config file. Just take one or the other one out. if you did any changes in web. config file please share and elaborate little more about the changes if you have made recently before
the error.
Krishana Kumar http://www.mosstechnet-kk.com
Please mark the replies and Proposed as answer if they help and solve your issue
Maybe you are looking for
-
Yet another customer with Photoshop CC crashing on opening!
Hi Photoshop CC keeps closing as soon as it opens on my PC. I have installed, uninstalled and reinstalled over five times since starting my subscription to CC two days ago, to no avail. I have thoroughly cleaned my PC, followed all the advice I can f
-
Partial Goods Receipt for Inbound Delivery
Hello Frends, We have a requirement to generate partial goods receipt against Inbound delivery created in Intercompany scenarios, however when we analzed there two alternative ways possible - 1. Goods Receipt in Inbound Delivery - Transaction VL32N
-
Unable to see builling Due list in VF04
Hi , I have created a Billing document using VF01 for a sales order. Once created in transaction VF04 i have entered the sales area and checked the order related check box and today's billing date but the order does not appear in the list. any pointe
-
Displaying image from binary data using java
hi there, i have created a swing applet displays me a url, what the url returns me is the image in binary format, and i want to show the complete image using that binary data so how do i do it. some thing like this : URL url = new URL("http://192.168
-
Menubar dataprovider in Flex2 Beta 3
am using following code:- <mx:MenuBar height="100%" labelField="@label" showRoot="true" iconField="Icon" > <mx:XMLList> <menuitem label="AWB"> <menuitem label="New AWB" Icon="@Embed(source='images/menu/create.jpg')"/> </menuitem> </mx:XMLList> </mx:M