TMS Configuration Needed Pls Help

Hi,
I have configured already a three system configuration in TMS.
Dev>qua>pro.
Now I want to include a Preproduction System in between qua and Pro.
How to configure as i have already configured as 3 system configuration..
Regards,
Saravanan.

Saravanan,
(Preprod system ) --> STMS -- Other Configuration -- Enter Domain Controller server name for Target Host.
Give the system number.
Now , Enter in to Domain Controller  --- STMS --- System Overview -- Click on waiting to be included --- Hit activate icon (approve)
Then you will see a system screen successfully added..
Double click on newly system added and in the screen enter Transport screen group "Name" and hit save.
Hope this will help you.
Thanks
Kalyan

Similar Messages

  • Logic needed - pls help me urgent

    Hi
    p_werks , p_vstel, s_vbeln are my selection screen.
    I want to extract following fields into one internal table.
    How to extract the fields using inner join or outer join?
    LIKP  ---  vkorg,vstel, kunag, lfdat,wadat,lifnr
    LIPS  ---  vbeln,posnr,werks,matnr,lfimg,meins,
    VBKD ---  bstkd, posex_e  (vbkd -vbeln = lips-vgbel)
    sydatum, ernam,rundate, runtime.
    Pls help me

    hi,
    Select vkorg vstel  kunag lfdat wadat lifnr from likp into table t_likp where
    Vbeln = p_vbeln and werks = p_werks.
    If not t_likp [] is initial.
    Select vbeln posnr werks matnr lfimg meins into table t_lips fronm lips  for all entries in table t_likp where vbeln = t_likp-vbeln.
    Endif.
    If not t_lips [] not initial.
    Select bstkd  posex_e into table t_vbkd from vbkd for all entries in t_lips where vgbel = t_lips-vbeln.
    Endif.
    check with this code.
    Regards,
    Narasimha
    Edited by: narasimha marella on Jun 11, 2008 6:14 AM
    Edited by: narasimha marella on Jun 11, 2008 6:18 AM

  • Oracle configuration manager pls help!!

    Hi
    I need to install oracle configuration manager and I am not sure where to install. My database is on a server called mledb. Do i have to install it on the server or on my local machine. Would appreciate if anyone can help..
    Thanks

    user_unlimited wrote:
    Do we need to pay license to use this OCM-CCR?If you are talking about the OCM that is part of your Support contract, then ... you license it by renewing your support contract.

  • Urgent help needs - pls help me

    i have four group in my template.
    each group have subtotal at the end of it's group.
    after each group total, i need to display total (which is differance between current group and previous) right below of group total.
    and this difference need to show from second group.
    example -
    Group 1 Year
    A ( total amount for Group 1)
    Group 2 Year
    B ( total amount for Group 2 )
    Total differance C (which is B - A )
    Group 3 Year
    D ( total amount for Group 3 )
    Total differance E ( which is D - C)
    Group 4 Year
    F ( total amount for Group 4)
    total difference G (which is F - E)
    G G1
              G G2
    G 999.00E
    G1
    G 999.00
    <?xdoxslt:set_variable($_XDOCTX,’px’,xdoxslt:get_variable($_XDOCTX, 'y'))?><?xdoxslt:set_variable($_XDOCTX,’y’,xdoxslt:get_variable($_XDOCTX, 'x'))?><?xdoxslt:set_variable($_XDOCTX,’x’,sum ($G1[(./FISCAL_YEAR=current()/FISCAL_YEAR)]/AMOUNT))?>
    E
    <?xdoxslt:set_variable($_XDOCTX,’py’,xdoxslt:get_variable($_XDOCTX, 'y'))?>
    Val is
    Px is <?xdoxslt:get_variable($_XDOCTX, 'px')?>
    <?xdoxslt:get_variable($_XDOCTX, 'x')?>
    <?xdoxslt:get_variable($_XDOCTX, 'y')?>
    Diff is
    <?xdofx:xdoxslt:get_variable($_XDOCTX, 'y')-xdoxslt:get_variable($_XDOCTX, 'px')?>E
              E
    above code does not give me subtraction.
    in above code pls omit that --- http -- in code but mistake it display in post.
    any help is greatly appreciated.
    thanks.
    Edited by: user6767417 on Apr 3, 2009 5:02 PM

    Hi ,
    thanksfor reply me.
    your suggestion is working.
    but now it gives me differance between two column of same group.
    but i need differance between same column of differant group ?
    ant kind of helpis greatly apprecidated.
    thanks.

  • DropBox v TimeCapsule (advice needed, pls help)

    Hi everyone,
    I need advice on how to set up my home system in terms of using Dropbox, Hard drive usage and home networking.
    Please bear with me while i explain my situation. I run my own Graphic Design business from a home office, I have an 27" iMac and i have a 13" Alu Late 2008 Macbook which i use for my work. I mainly work on my iMac most of the time and then use my macbook in evenings (in front of TV) and when out of the house/office. My iMac has a 1TB hard drive and my Macbook has a 160GB hard drive. I also have a 3TB Lacie external hard drive storing all of my files.
    I have a Pro Dropbox account so i have just over a 1TB of storage there too. My plan was to use the Dropbox as my main file storage so it syncs all the files on bot macs and i don't have to waste time dragging files to different backups (i can also use files remotely when i am on my Macbook out of the office or downstairs etc), get a program like Crash Plan to make a backup of everything and then have a physical copy on my Lacie drive just to ensure i am safe every which way.
    The problem i have is that my macbook's hard drive is only 160gb and as i use a lot of large files my dropbox just eats up my hard drive and i can't use all the files i have on my dropbox. I have tried to think of lots of ways around syncing but the way Dropbox works is exactly what i want to do. I have considered changing my plan and buying a TimeCapsule and use that as a home network then use Dropbox if i need anything out of the house. So i suppose my questions are:
    Do i buy a TC and use that for my home network to save on hard drive space and mean i can work in any room but still sync?
    Or, do i buy a new 1TB hard drive for my 2008 macbook so Dropbox can save on there and sync files?
    Or, buy a new macbook pro (only problem is the new ones use a flash drive which won't hold the dropbox), i can really afford this option either at the moment?
    Please help me out guys as i need things to just work as i am pretty busy and can't decide which to do to help me out...any suggestions welcome.

    Once you boot a computer from SSD you will never go back to mechanical disks ... at least for boot.
    Buy the biggest you can afford.. 500GB SSD are now around $270 here.. you don't need the best.. buy the samsung 840 evo. It might not last as long as the more expensive pro series but that does mean much for a 2008 laptop. You are stretching it already.
    I have a 256GB SSD in a 2011 MBP 15" with a high res screen I got on ebay cheap. It is a great machine.. or was until i put Mavericks on it.. I will take it back to Mountain Lion when I get a chance. I run an i7 mini also 2011 with the small video card they had..
    I got it cheap from ebay.. of course.. It has a 256GB sandisk drive.
      Media Name: SanDisk SDSSDH2256G Media
    I just got another one of these with the original 750GB hard disk and it feels so so slow.. you end up totally spoiled.. everything opens and closes instantly in the mini with SSD and the other one is so so slow. It is getting the new 500GB SSD.
    I have done a few of these now for friends.. it does end up costing more than a current model mini.. but other than missing USB3 which is a pity.. they are a great little computer. And with SSD only near totally silent.. it occasionally spins the fan up if it has been running hard for a while. I am getting old and grumpy and noisy rattling computer fans are more than I can stand.
    I have done some research into the Seagate SSHD and it seems that it isn't ideal for people looking to crunch larger files which would probably be me
    Yes, I warned you the SSHD is not much good for very large files.. Even so a modern 7200rpm drive should work a lot better.
    Note the DVD drive will be sata 1 so yes the SSD should replace the current hdd.

  • Logic needed Pls help

    Hi
    I have to add 'Upload excel file' option in Material consumption program. Current logic is Uploading Unix file. Can any one give me some idea pls.
    following is my coding
    PROGRAM ZMDM0081 MESSAGE-ID ZM.
    TABLES: MARA.
    * Resource file record structure
    DATA: BEGIN OF RECORD,
            MATERIAL_NUMBER(10),
            PLANT(5),
            CORRECTED_VALUE_19(11),
            CORRECTED_VALUE_18(11),
            CORRECTED_VALUE_17(11),
            CORRECTED_VALUE_16(11),
            CORRECTED_VALUE_15(11),
            CORRECTED_VALUE_14(11),
            CORRECTED_VALUE_13(11),
            CORRECTED_VALUE_12(11),
            CORRECTED_VALUE_11(11),
            CORRECTED_VALUE_10(11),
            CORRECTED_VALUE_09(11),
            CORRECTED_VALUE_08(11),
            CORRECTED_VALUE_07(11),
            CORRECTED_VALUE_06(11),
            CORRECTED_VALUE_05(11),
            CORRECTED_VALUE_04(11),
            CORRECTED_VALUE_03(11),
            CORRECTED_VALUE_02(11),
            CORRECTED_VALUE_01(11),
          END OF RECORD.
    * Working variables
    DATA: RECORD_READ(6)   TYPE P,
          RECORD_INSERT(6) TYPE P,
          RECORD_OMIT(6)   TYPE P,
          MATERIAL_NUMBER  LIKE MARA-MATNR,
          G_BRGEW          LIKE MARA-BRGEW,
          N_NTGEW          LIKE MARA-NTGEW,
          PLANT            LIKE MARC-WERKS,
          REMARKS(50),
          FLAG(1),
          RECORD_FLAG(1),
          INTENSIFIED_FLAG(1),
          NUMBER(6)        TYPE P.
    * Constant variables
    CONSTANTS: VALID   VALUE '1',
               INVALID VALUE '0',
               ON      VALUE '1',
               OFF     VALUE '0'.
    * Reporting groups
    FIELD-GROUPS HEADER.
    * Insert into groups
    INSERT MATERIAL_NUMBER
           PLANT
           REMARKS
           INTO HEADER.
    * BDC parameters
    SELECTION-SCREEN BEGIN OF BLOCK ONE WITH FRAME TITLE TEXT-010.
    PARAMETERS: FILE(30) TYPE C
                          DEFAULT '/export/remote/data.txt'
                          LOWER CASE
                          OBLIGATORY,
                 SESSION  LIKE RL04I-MAPPE
                          OBLIGATORY
                          DEFAULT '8301_MM02',
                          UNAME LIKE SY-UNAME DEFAULT SY-UNAME.
    SELECTION-SCREEN END OF BLOCK ONE.
    * Data conversion parameters
    SELECTION-SCREEN BEGIN OF BLOCK TWO WITH FRAME TITLE TEXT-020.
    PARAMETERS MONTH(2) TYPE N DEFAULT 1.
    SELECTION-SCREEN END OF BLOCK TWO.
    * Notes to user
    SELECTION-SCREEN BEGIN OF BLOCK THREE WITH FRAME TITLE TEXT-030.
    SELECTION-SCREEN COMMENT /5(70) TEXT-040.
    SELECTION-SCREEN COMMENT /5(70) TEXT-050.
    SELECTION-SCREEN END OF BLOCK THREE.
    MOVE UNAME TO SY-UNAME.
    * Including SAP R/3 BDC customized include
    INCLUDE ZSIN0001.
    * Verifying the path & file name
    AT SELECTION-SCREEN ON FILE.
      PERFORM RESOURCE_FILE_OPEN.
    * Processing BDC
    START-OF-SELECTION.
      PERFORM SESSION_OPEN.
      PERFORM SESSION_GENERATION.
      PERFORM SESSION_CLOSE.
      CLOSE DATASET FILE.
    * Printing execution report
    END-OF-SELECTION.
      SKIP.
      WRITE  /15 'BDC & SYSTEM PARAMETERS -' COLOR 3.
      SKIP.
      WRITE: /15 'Resource path & filename ..........', FILE,
             /15 'Session name ......................', SESSION,
             /15 'ABAP/4 Program name ...............', SY-REPID,
             /15 'Client ............................', SY-MANDT,
             /15 'SAP System ID .....................', SY-SYSID,
             /15 'SAP Release .......................', SY-SAPRL,
             /15 'Host ..............................', SY-HOST,
             /15 'Operating system ..................', SY-OPSYS,
             /15 'Database system ...................', SY-DBSYS,
             /15 'User ID ...........................', SY-UNAME,
             /15 'Date ..............................', SY-DATUM,
             /15 'Time ..............................', SY-UZEIT.
      SKIP 3.
      WRITE  /15 'DATA CONVERSION DEFAULT PARAMETERS -' COLOR 3.
      SKIP.
      WRITE: /15 'Start at previous month ............', MONTH.
      SKIP 3.
      WRITE  /15 'EXECUTION REPORT -' COLOR 3.
      SKIP.
      WRITE: /15 'Total records read form file ......', RECORD_READ,
             /15 'Total records insert to BDC .......', RECORD_INSERT,
             /15 'Total records omitted .............', RECORD_OMIT.
      NEW-PAGE.
      SORT.
      LOOP.
        ADD 1 TO NUMBER.
        IF INTENSIFIED_FLAG EQ ON.
          FORMAT COLOR 2 INTENSIFIED ON.
          MOVE OFF TO INTENSIFIED_FLAG.
        ELSE.
          FORMAT COLOR 2 INTENSIFIED OFF.
          MOVE ON TO INTENSIFIED_FLAG.
        ENDIF.
        WRITE: /1 NUMBER, MATERIAL_NUMBER, PLANT, REMARKS.
        POSITION SY-LINSZ.
        WRITE ' '.
      ENDLOOP.
    * Reading resource file and generating BDC session
    FORM SESSION_GENERATION.
      DO.
        READ DATASET FILE INTO RECORD.
        IF SY-SUBRC NE 0 OR RECORD IS INITIAL.
          EXIT.
        ENDIF.
        ADD 1 TO RECORD_READ.
        PERFORM RECORD_CONDENSATION.
        PERFORM RECORD_VERIFICATION.
        CHECK RECORD_FLAG EQ VALID.
        REFRESH BDCDATA.
        PERFORM SCREEN_SEQUENCE.
        PERFORM BDC_TRANSACTION USING 'MM02'.
        IF SY-SUBRC EQ 0 .
          ADD 1 TO RECORD_INSERT.
        ELSE.
          ADD 1 TO RECORD_OMIT.
        ENDIF.
      ENDDO.
    ENDFORM.                    "SESSION_GENERATION
    * Condensing the record fields
    FORM RECORD_CONDENSATION.
      CONDENSE: RECORD-MATERIAL_NUMBER,
                RECORD-PLANT,
                RECORD-CORRECTED_VALUE_19,
                RECORD-CORRECTED_VALUE_18,
                RECORD-CORRECTED_VALUE_17,
                RECORD-CORRECTED_VALUE_16,
                RECORD-CORRECTED_VALUE_15,
                RECORD-CORRECTED_VALUE_14,
                RECORD-CORRECTED_VALUE_13,
                RECORD-CORRECTED_VALUE_12,
                RECORD-CORRECTED_VALUE_11,
                RECORD-CORRECTED_VALUE_10,
                RECORD-CORRECTED_VALUE_09,
                RECORD-CORRECTED_VALUE_08,
                RECORD-CORRECTED_VALUE_07,
                RECORD-CORRECTED_VALUE_06,
                RECORD-CORRECTED_VALUE_05,
                RECORD-CORRECTED_VALUE_04,
                RECORD-CORRECTED_VALUE_03,
                RECORD-CORRECTED_VALUE_02,
                RECORD-CORRECTED_VALUE_01.
    ENDFORM.                    "RECORD_CONDENSATION
    * Verifying record fields
    FORM RECORD_VERIFICATION.
      MOVE VALID TO RECORD_FLAG.
      UNPACK RECORD-MATERIAL_NUMBER TO MATERIAL_NUMBER.
      SELECT SINGLE * FROM MARA
                          WHERE MATNR EQ MATERIAL_NUMBER.
      IF SY-SUBRC NE 0.
        ADD 1 TO RECORD_OMIT.
        MOVE: RECORD-PLANT TO PLANT,
              TEXT-060     TO REMARKS,
              INVALID      TO RECORD_FLAG.
        EXTRACT HEADER.
        EXIT.
      ELSE.
        IF MARA-NTGEW > MARA-BRGEW.     "add to check for net weight > grow
          MOVE '1' TO FLAG.
        ELSE.
          MOVE ' ' TO FLAG.
        ENDIF.
      ENDIF.
      MOVE RECORD-PLANT TO PLANT.
      SELECT SINGLE MATNR WERKS INTO  (PLANT, MATERIAL_NUMBER)
                                FROM  ('MARC')
                                WHERE MATNR EQ MATERIAL_NUMBER
                                AND   WERKS EQ PLANT.
      IF SY-SUBRC NE 0.
        ADD 1 TO RECORD_OMIT.
        MOVE: TEXT-070 TO REMARKS,
              INVALID  TO RECORD_FLAG.
        EXTRACT HEADER.
      ENDIF.
    ENDFORM.                    "RECORD_VERIFICATION
    * Performing the screen sequence
    FORM SCREEN_SEQUENCE.
      PERFORM SCREEN_SAPLMGMM_0060.
      PERFORM SCREEN_SAPLMGMM_0070.
      PERFORM SCREEN_SAPLMGMM_3005.
      PERFORM SCREEN_SAPLMGMM_0081.
      PERFORM SCREEN_SAPLMGMM_3006.
      PERFORM SCREEN_SAPLMGMM_3110.
    ENDFORM.                    "SCREEN_SEQUENCE
    * Change Material: Initial Screen
    FORM SCREEN_SAPLMGMM_0060.
      PERFORM BDC_DYNPRO USING 'SAPLMGMM'   '0060'.
      PERFORM BDC_FIELD  USING 'RMMG1-MATNR' RECORD-MATERIAL_NUMBER.
      PERFORM BDC_FIELD  USING 'BDC_OKCODE'  '/5'. " Select view(s)
    ENDFORM.                    "SCREEN_SAPLMGMM_0060
    * Select view(s)
    FORM SCREEN_SAPLMGMM_0070.
      PERFORM BDC_DYNPRO USING 'SAPLMGMM'            '0070'.
      PERFORM BDC_FIELD  USING 'MSICHTAUSW-KZSEL(01)' 'X'.
      PERFORM BDC_FIELD  USING 'BDC_OKCODE'           '/0'. " Enter
    ENDFORM.                    "SCREEN_SAPLMGMM_0070
    * Change Material: Basic data
    FORM SCREEN_SAPLMGMM_3005.
      PERFORM BDC_DYNPRO USING 'SAPLMGMM'   '3005'.
      PERFORM BDC_FIELD  USING 'BDC_OKCODE' 'SP08'.             " MRP 1
      IF FLAG EQ '1'.
        PERFORM BDC_DYNPRO USING 'SAPLMGMM'   '3005'.
        PERFORM BDC_FIELD  USING 'BDC_OKCODE'           '/0'.
      ENDIF.
    ENDFORM.                    "SCREEN_SAPLMGMM_3005
    * Organizational levels
    FORM SCREEN_SAPLMGMM_0081.
      PERFORM BDC_DYNPRO USING 'SAPLMGMM'    '0081'.
      PERFORM BDC_FIELD  USING 'RMMG1-WERKS' RECORD-PLANT.
      PERFORM BDC_FIELD  USING 'BDC_OKCODE'  '=ENTR'.  "Continue
    ENDFORM.                    "SCREEN_SAPLMGMM_0081
    * Change Material: MRP 1
    FORM SCREEN_SAPLMGMM_3006.
      PERFORM BDC_DYNPRO USING 'SAPLMGMM'   '3006'.
      PERFORM BDC_FIELD  USING 'BDC_OKCODE' 'ZU11'. " Consumption
    ENDFORM.                    "SCREEN_SAPLMGMM_3006
    * Change Material: Consumption
    FORM SCREEN_SAPLMGMM_3110.
      CONSTANTS: PREVIOUS_MONTH VALUE 'X',
                 THIS_MONTH     VALUE ' '.
      DATA: ROW_POSITION(2)      TYPE N VALUE 0,
            WS_POSITION(2)       TYPE C,
            FIELDNAME            LIKE BDCDATA-FNAM,
            CONSUMPTION_QUANTITY LIKE RECORD-CORRECTED_VALUE_01.
      PERFORM BDC_DYNPRO USING 'SAPLMGMM' '3110'.
    *  if month eq previous_month.
    *    move 1 to row_position.
    *  elseif month eq this_month.
    *    move 0 to row_position.
    *  endif.
      MOVE MONTH TO ROW_POSITION.
      DO 19 TIMES VARYING CONSUMPTION_QUANTITY
                  FROM RECORD-CORRECTED_VALUE_01
                  NEXT RECORD-CORRECTED_VALUE_02.
        IF ROW_POSITION GT 11.
          MOVE 1 TO ROW_POSITION.
          PERFORM BDC_FIELD  USING 'BDC_OKCODE' 'VWNP'. " Page down
          PERFORM BDC_DYNPRO USING 'SAPLMGMM'   '3110'.
        ENDIF.
        UNPACK ROW_POSITION TO WS_POSITION.
        CONCATENATE 'RM03M-VBWRT(' WS_POSITION ')' INTO FIELDNAME.
        IF CONSUMPTION_QUANTITY+0(1) EQ '-'.
          SHIFT CONSUMPTION_QUANTITY LEFT BY 1 PLACES.
          CONCATENATE CONSUMPTION_QUANTITY '-' INTO CONSUMPTION_QUANTITY.
        ENDIF.
        PERFORM BDC_FIELD USING FIELDNAME CONSUMPTION_QUANTITY.
        ADD 1 TO ROW_POSITION.
      ENDDO.
      PERFORM BDC_DYNPRO USING 'SAPLMGMM' '3110'.
      PERFORM BDC_FIELD  USING 'BDC_OKCODE' '/11'. " Save
    ENDFORM.                    "SCREEN_SAPLMGMM_3110
    Include Program
    * BDC data table and record structure defination
    DATA BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
    * Opening a resource file
    FORM RESOURCE_FILE_OPEN.
      DATA ERROR_MESSAGE(40).
    *Begin of changes Mod01
    *  OPEN DATASET FILE FOR INPUT IN TEXT MODE MESSAGE ERROR_MESSAGE.
      OPEN DATASET FILE FOR INPUT IN TEXT MODE ENCODING DEFAULT MESSAGE
                                                          ERROR_MESSAGE.
    *End of changes Mod01
      IF SY-SUBRC NE 0.
        MESSAGE E000 WITH FILE ERROR_MESSAGE.
      ENDIF.
    ENDFORM.
    * Opening of BDC session
    FORM SESSION_OPEN.
      CALL FUNCTION 'BDC_OPEN_GROUP'
           EXPORTING  CLIENT              = SY-MANDT
                      DEST                = SY-HOST
                      GROUP               = SESSION
                      USER                = SY-UNAME
                      KEEP                = 'X'
           EXCEPTIONS CLIENT_INVALID      = 01
                      DESTINATION_INVALID = 02
                      GROUP_INVALID       = 03
                      HOLDDATE_INVALID    = 04
                      INTERNAL_ERROR      = 05
                      QUEUE_ERROR         = 06
                      RUNNING             = 07
                      USER_INVALID        = 08.
      CASE SY-SUBRC.
        WHEN 01. MESSAGE E001 WITH SY-MANDT.
        WHEN 02. MESSAGE E002.
        WHEN 03. MESSAGE E003.
        WHEN 04. MESSAGE E004.
        WHEN 05. MESSAGE E005.
        WHEN 06. MESSAGE E006.
        WHEN 07. MESSAGE E007.
        WHEN 08. MESSAGE E007.
      ENDCASE.
    ENDFORM.
    * Closing BDC session
    FORM SESSION_CLOSE.
      CALL FUNCTION 'BDC_CLOSE_GROUP'
        EXCEPTIONS NOT_OPEN    = 01
                   QUEUE_ERROR = 02.
      CASE SY-SUBRC.
        WHEN 01. MESSAGE E009.
        WHEN 02. MESSAGE E010.
      ENDCASE.
    ENDFORM.
    * Inserting data into BDC
    FORM BDC_TRANSACTION USING TRANSACTION_CODE.
      CALL FUNCTION 'BDC_INSERT'
           EXPORTING  TCODE          = TRANSACTION_CODE
           TABLES     DYNPROTAB      = BDCDATA
           EXCEPTIONS INTERNAL_ERROR = 1
                      NOT_OPEN       = 2
                      QUEUE_ERROR    = 3
                      TCODE_INVALID  = 4
                      OTHERS         = 5.
    ENDFORM.
    * Insert program name & screen number
    FORM BDC_DYNPRO USING PROGRAM DYNPRO.
      CLEAR BDCDATA.
      MOVE: PROGRAM TO BDCDATA-PROGRAM,
            DYNPRO  TO BDCDATA-DYNPRO,
            'X'     TO BDCDATA-DYNBEGIN.
      APPEND BDCDATA.
    ENDFORM.
    * Inserting field name/BDC_OKCODE/BDC_CUESOR and value
    FORM BDC_FIELD USING FNAM FVAL.
      CLEAR BDCDATA.
      MOVE: FNAM TO BDCDATA-FNAM,
            FVAL TO BDCDATA-FVAL.
      APPEND BDCDATA.
    ENDFORM.

    i have changed the selection screen as follows
    SELECTION-SCREEN BEGIN OF BLOCK one WITH FRAME TITLE text-010.
    *                                                          "1)
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS p_unix RADIOBUTTON GROUP rad1 .                 "
    SELECTION-SCREEN COMMENT 5(26) text-008.
    SELECTION-SCREEN POSITION 33.                              "
    PARAMETERS: file(128) TYPE c
                          DEFAULT '/export/remote/data.txt' LOWER CASE.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    PARAMETERS p_xls RADIOBUTTON GROUP rad1 .                 "excel file
    SELECTION-SCREEN COMMENT 5(26) text-009.
    SELECTION-SCREEN POSITION 33.                              "
    PARAMETERS: filf(128).
    SELECTION-SCREEN END OF LINE.
    *>>
    *PARAMETERS: file(128) TYPE c
    *                      DEFAULT '/export/remote/data.txt' LOWER CASE OBLIGATORY,
    PARAMETERS:  session  LIKE rl04i-mappe OBLIGATORY
                          DEFAULT '8301_MM02',
                 uname LIKE sy-uname DEFAULT sy-uname.
    SELECTION-SCREEN END OF BLOCK one.
    * Data conversion parameters
    SELECTION-SCREEN BEGIN OF BLOCK two WITH FRAME TITLE text-020.
    PARAMETERS month(2) TYPE n DEFAULT 1.
    SELECTION-SCREEN END OF BLOCK two.
    * Notes to user
    SELECTION-SCREEN BEGIN OF BLOCK three WITH FRAME TITLE text-030.
    SELECTION-SCREEN COMMENT /5(70) text-040.
    SELECTION-SCREEN COMMENT /5(70) text-050.
    SELECTION-SCREEN END OF BLOCK three.

  • I have a gmail account and have been able to check my emails on both my PC and iPad. For some strange reasons I am not able to read my emails from my iPad. It says I cannot open another account which is not what I need.Pls help.THANKS!

    Reading my email from my iPad which is no longer allowing me to do. Thanks!

    Hey there palmierl,
    Welcome to Apple Support Communities.
    It sounds like there’s an issue sending and receiving emails from your Gmail account on your iPad. Take a look at the article linked below, the troubleshooting suggestions it provides will likely resolve the issue.
    Gmail account cannot get or send email in iOS - Apple Support
    Cheers,
    -Jason

  • Pls help me with this installation problem. Your advice is highly needed.

    I am installing oracle 11.1.6.0 on windows xp professional everything was going fine untill there was a pop up that reads below
    INFO: exit-tool: Launch browser
    INFO: saving exit only tools ...
    INFO: no detached only tools in this session
    INFO: exit-only tools are created in single installation
    INFO: no. of sets of tools to be run: 1
    INFO: ca page to be shown: true
    INFO: exitonly tools to be excuted passed: 1
    INFO: Starting to execute configuration assistants
    INFO: Command = C:\WINDOWS\system32\cmd /c call c:\app\doN H\home/bin/netca.bat /orahome c:\app\doN H\home /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile c:\app\doN H\home\network\install\netca_typ.rsp
    Command = C:\WINDOWS\system32\cmd /c call c:\app\doN H\home/bin/netca.bat has failed
    Execution Error : 'c:\app\doN' is not recognized as an internal or external command,
    operable program or batch file.
    INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
    *** Starting OUICA ***
    Oracle Home set to c:\app\doN H\home
    Configuration directory is set to c:\app\doN H\home\cfgtoollogs. All xml files under the directory will be processed
    INFO: The "c:\app\doN H\home\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    INFO:
    The Runconfig command constructed is C:\app\doN H\home\oui\bin\runConfig.bat ORACLE_HOME=C:\app\doN H\home MODE=perform ACTION=configure RERUN=false $*
    INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home C:\app\doN H\home we use the runConfig Command instead of the plugin's command
    INFO: Created a new file C:\app\doN H\home\cfgtoollogs\configToolFailedCommands
    INFO: Since the option is to overwrite the existing C:\app\doN H\home\cfgtoollogs\configToolFailedCommands file, backing it up
    INFO: The backed up file name is C:\app\doN H\home\cfgtoollogs\configToolFailedCommands.bak
    SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
    1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
    2. Fix the errors causing these failures.
    3. Select the failed assistants and click the 'Retry' button to retry them.
    INFO: User Selected: Yes/OK
    INFO: Starting to execute configuration assistants
    INFO: Command = C:\WINDOWS\system32\cmd /c call c:\app\doN H\home/bin/netca.bat /orahome c:\app\doN H\home /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile c:\app\doN H\home\network\install\netca_typ.rsp
    Command = C:\WINDOWS\system32\cmd /c call c:\app\doN H\home/bin/netca.bat has failed
    Execution Error : 'c:\app\doN' is not recognized as an internal or external command,
    operable program or batch file.
    INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
    *** Starting OUICA ***
    Oracle Home set to c:\app\doN H\home
    Configuration directory is set to c:\app\doN H\home\cfgtoollogs. All xml files under the directory will be processed
    INFO: The "c:\app\doN H\home\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    INFO:
    The Runconfig command constructed is C:\app\doN H\home\oui\bin\runConfig.bat ORACLE_HOME=C:\app\doN H\home MODE=perform ACTION=configure RERUN=false $*
    INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home C:\app\doN H\home we use the runConfig Command instead of the plugin's command
    INFO: Since the option is to overwrite the existing C:\app\doN H\home\cfgtoollogs\configToolFailedCommands file, backing it up
    INFO: The backed up file name is C:\app\doN H\home\cfgtoollogs\configToolFailedCommands.bak.1
    SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
    1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
    2. Fix the errors causing these failures.
    3. Select the failed assistants and click the 'Retry' button to retry them.
    INFO: User Selected: No
    1...The Netmgr and the ODCA was not properly configured and they are not opening on the windows enviroment.
    2...The sqlplus, whenever called up, aooears and disappears in 1 second
    3...I can not connet to the database. Says adapter error
    4...Will 1 start the listner before i can connect and how?
    Ur contribution is highly needed. TNX

    I am installing oracle 11g on windows xp, everything installed suceessfully except the enterprise control. the error reads
    Jan 14, 2011 5:32:30 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
    Jan 14, 2011 5:32:40 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
    Jan 14, 2011 5:32:51 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
    Jan 14, 2011 5:33:01 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
    Jan 14, 2011 5:33:11 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
    Jan 14, 2011 5:33:21 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
    Jan 14, 2011 5:33:31 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
    CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
    Jan 14, 2011 5:33:41 PM oracle.sysman.emcp.EMConfig perform
    SEVERE: Error starting Database Control
    Refer to the log file at G:\app\doN_H\cfgtoollogs\dbca\orcl1\emConfig.log for more details.
    Jan 14, 2011 5:33:41 PM oracle.sysman.emcp.EMConfig perform
    CONFIG: Stack Trace:
    oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
    at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:869)
    at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:250)
    at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:213)
    at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:235)
    at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
    at java.lang.Thread.run(Thread.java:595)
    Jan 14, 2011 5:33:41 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
    CONFIG: Restoring oracle.installer.oui_loc to G:\app\doN_H\product\11.1.0\db_1\oui
    It also told me that i can configure it later by running G:\app\doN_H\product\11.1.0\db_1\BIN\emca.script
    Pls help me. I appreciate ur help so far.

  • How to Change the Default SSH Port from Terminal ? now showing default SSH Port 22 i need change it pls help me how can do

    How to Change the Default SSH Port from Terminal ?
    now showing default SSH Port 22 i need change it pls help me how can do

    How to Change the Default SSH Port from Terminal ?
    now showing default SSH Port 22 i need change it pls help me how can do

  • solved pls help needed in creating template

    hi frs
    i have created a template need some modification to be done my xml output looks like below
    off            hours              q1           q2          q3         avg
    aaa          10                    1            2            3            2
    bbb          20                    2            4             0           3i have done everything but my doubt is while creating avg
    to get average i used the following code
    <?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT') 
    +xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 3?> i have used div 3 but my requirement is like if any thing is 0 for ex if q1= 2 and q2=4 and q3=0 then my formula for avg is like below
    <?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT') 
    +xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 2?> like wise if we have values like q1=1 ,q2=0 ,q3=0
    then
    <?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT') 
    +xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 1?>how to get it.
    pls help.
    thanks
    basa
    Message was edited by:
    Badsha
    Message was edited by:
    Badsha
    Message was edited by:
    Badsha

    Hi,
    I dont know the solution for this, but heres a work arround
    //create new label some where else in the excel sheet as shown below
    Label lblcmbdata;
    for(int i=0; i<1000; i++)
                 lblcmbdata = new Label(75, i, (i+1)+" satish", format);
                 sheet1.addCell(lblcmbdata);
    }//set the validation range as shown below
    writableCellFeature.setDataValidationRange(75,0,75,1000);
    Label cmb = null;
    cmb = new Label(0, 1, "Select",format);
    cmb.setCellFeatures(writableCellFeature);
    sheet.addCell(cmb);this will create a combo list with 1000 values
    also you can keep the data to be populated in the different sheet in same workbook by creating a named range as below
    workbook.addNameArea("cmbdata", sheet1, 0, 0, 0, 1000);
    // then fill the data in sheet1
    Label lblcmbdata;
    for(int i=0; i<1000; i++)
                    lblcmbdata = new Label(0, i, (i+1)+" satish", format);
                    sheet1.addCell(lblcmbdata);
    //set the validation named range as below
    writableCellFeature.setDataValidationRange("cmbdata");
    Label cmb = null;
    cmb = new Label(0, 1, "Select",format);
    cmb.setCellFeatures(writableCellFeature);
    sheet.addCell(cmb);Thanks and Regards
    Satish

  • Can someone pls help me with java on my macbook pro because after i download the mountain lion java has died and i need java to see streaming quotes from stock market

    can someone pls help me with java on my macbook pro because after i download the mountain lion java has died and i need java to see streaming quotes from stock market

    Java is no longer included in Mac OS X by default. If you want Java, you will have to install it.
    However, note that you should think twice before installing Java for such a trivial need as looking at stock market quotes. There are other ways to get that information that don't involve Java, and using Java in your web browser is a HUGE security risk right now. Java has been vulnerable to attack almost constantly for the last year, and has become a very popular, frequently used method for getting malware installed via "drive-by downloads." You really, truly don't want to be using it. See:
    Java is vulnerable… Again?!
    http://java-0day.com

  • HT3702 I am unable to add my bank/card details in my apple account, every time i am getting a message that it has been declined. kindly help me in authorise my bank card in my apple account i need to purchase few apps, pls help me

    Hi,
    I am unable to add my bank/card details in my apple account, every time i am getting a message that it has been declined. kindly help me in authorise my bank card in my apple account i need to purchase few apps, pls help me

    What sort of card are you trying to use ? If it's a debit card then I don't think that they are still accepted as a valid payment method - they are not listed on this page and there have been a number of posts recently about them being declined
    If it's a credit card then is it registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management

  • HT1222 hello..i accidently delete all my files in may ipodtouch...and ican restore it..i need to have a 10.6.3 version of itune,but i cant download files,coz i only have 32 bit..pls, help what o do. i love my ipodtouch realy..i just want to restore my itu

    hello..i accidenty delete All my files in my ipod touch,,and icant restore my itunes,coz i need a version of itunes 10.6.3,but i only have 32bit..i cant download because they need 64bit,,pls,,help me dont know what to do,,i need to restore my itunes music..sorry im not good in english,,try to understand

    I assume you don't have a backup on an external HD. You always should, because then you could easily fix your problem.
    Boot in Safe Mode. See What is Safe Boot, Safe Mode? (Mac OS X)
    http://docs.info.apple.com/article.html?artnum=107392 Takes a while to run, but it usually "fixes" problems.
    Safe Boot takes longer than normal startup
    http://support.apple.com/kb/TS1884?viewlocale=en_US
     Cheers, Tom

  • Need to update the xml clob-pls pls help!

    my xml is stored as blob, i can view,do string manipulation and churn out data etc...but now i have a request where i need to find some particualr node and modify its value.
    here is what i m doing now which works.
    select compressor2.blob_decompress2(xml_data) into l_blob
    from tablename where id=2008890;
    clob_data := utl2.blob2clob(l_blob);
    parser := xmlparser.newParser;
    xmlparser.parseClob(parser, clob_data);
    doc := xmlparser.getDocument(parser);
    nl := xmldom.getElementsByTagName(doc, '*');
    len := xmldom.getLength(nl);
    dbms_output.put_line('Length : ' || len);
    tag_name := 'Node Verson : ' || xmldom.getVersion(doc)|| '<br>';
    for counter in 0..len-1
    loop
    tag_name := '';
    node := xmldom.item(nl, counter);
    parent_node := xmldom.getParentNode(node);
    child_node := xmldom.getfirstchild(node);
    tag_name := 'Parent Name : ' || xmldom.getNodeName(parent_node) || '<br>';
    tag_name := tag_name || 'Node Name : ' || xmldom.getNodeName(node) || '<br>';
    IF xmldom.getNodeType(child_node) = xmldom.TEXT_NODE THEN
    tag_name := tag_name || 'Node Value : ' || xmldom.getNodeValue(child_node)|| '<br>';
    ELSE
    tag_name := tag_name || 'Node Value : Node has child.No Node value.' || '<br>';
    END IF;
    tag_name := tag_name || 'Node Type : '||xmldom.getNodeType(child_node) || '<br>';
    ele_name := xmldom.getDocumentElement(doc);
    child_nl := xmldom.getElementsByTagName(ele_name,'*');
    IF xmldom.isNull(doc) THEN
    htp.p('Document is null');
    ELSE
    htp.p(tag_name);
    END IF;
    end loop;
    b_blob := utl.clob2blob(tag_name);
    select compressor2.blob_compress2(b_blob) into b_blob2 from dual;
    insert into xupdate values (2008890,b_blob2);
    i still need to know how to update the xml clob... i want to know how to find the particular node and then modify the clob with the new value. rest i can update the table.
    pls pls help..on this.

    my oracle version.
    10.2.0.1.0
    i want to update here..
    <?xml version="1.0" encoding="utf-8"?>
    <TestData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
         <Status>CompletedNormally</TestCompletionStatus>
         <ComputerName>DUILT10</ComputerName>
         <StartTime>2008-03-19T15:12:23</StartTime>
    ---Some more noded----
    <Parameters>
              <RangeMeasured>
                   <Name>PDissBol-5[C]</Name>
                   <Min>1.22</Min>
                   <Max>1.36</Max>
                   <Units>W</Units>
              </RangeMeasured>
              <TextMeasured>
                   <Name>ComputerName</Name>
                   <Value>DUILT10</Value>
              </TextMeasured>
              <RangeMeasured>
                   <Name>TrackError25[C]To-5[C]</Name>
                   <Min>0.031</Min>
                   <Max>0.041</Max>
                   <Units>dB</Units>
              </RangeMeasured>
              <RangeMeasured>
                   <Name>Power-5[C]</Name>
                   <Min>1.988</Min>
                   <Max>1.061</Max>
                   <Units>dBm</Units>
              </RangeMeasured>
    ---some more noded---
    </Parameters>
    </TestData>
    the file is huge.
    what i need to chang==>
    I 1st need to find this PDissBol-5[C] within the <Parameters> Node and then change its <Min> and <Max>
    and then update the table.
    pls pls suggest.

  • BB Curve 8320 Software needed! pls help

    Im a BB 8320 Curve user. Software version 4.2.2.180 (Platform 2.5.0.36) T-mobile user. I need to download this version bcoz i've upgraded to OS 4.5 but im didnt liked dat much. So i want to switch to 4.2.2.180 (Platform 2.5.0.36) but didnt get this version anywhere. Pls help me friends...!!!
    Solved!
    Go to Solution.

    Hi and Welcome to the Forums!
    All carriers official versions are available via this portal:
    http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    I've no idea which carriers have the version you desire...you'll have to dig through to find it.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for