TMS error FTP_FAILED

Dear Expert,
I have finished client import successfully after that I had deleted the request from OS level in QAS.
Now when we import request in QAS getting error TMS_MGR_TRANSMIT_TR_QUEUE FTP_FAILED.
In long text we are getting
Source file could not be opened
Message no. PS001
Diagnosis
An error occurred when opening the source file for reading.
File name: RX00051.PRD
Directory: $TR_DATA
Error code: 16
System is trying to read a request which is deleted.I have done delfrombuffer <REQT NO> <QAS> as request was showing in the buffer but no benefit.please help me out.
Sanjeev

Dear Sanjeev
I've had the same problem. My solution was to take a closer look at the source TMS folder. Check, if the file /sapmnt/trans/data/RX00051.PRD exists. In my case there was no file, so tp exited for all other pending successíng files. I was able to rename the existing backup-file (maybe someone renamed the file before). After renaming it, tp run successfully.
Best Regards,
DW

Similar Messages

TMS Error messgae: Source file could not be opened. Message: FTP Failed

Can you please help me with this error ?
I am trying to adjust the import queue on prod system, but I get this error:
TMS Error messgae: Source file could not be opened. Message: FTP Failed
SLOG:
STOP TRANSMIT BUFFER ENTR SID g 0000 20110720075455              ADMIN        ulvcp743p
STOP TRANSMIT BUFFER ENTR SID g 0000 20110720075809              ADMIN        ulvcp743p
START TRANSMIT BUFFER ENTR SID g      20110720075812              ADMIN        ulvcp743p
STOP TRANSMIT BUFFER ENTR SID g 0000 20110720080133              ADMIN        ulvcp743p
START TRANSMIT BUFFER ENTR SID g      20110720081655              ADMIN        ulvcp743p
WARNING: /usr/sap/trans/tmp/SID.LOB is already in use (10), I'm waiting 2 sec (20110720081843). My name: pid 28901462 on ulvcp743p (SIDadm)
WARNING: /usr/sap/trans/tmp/SID.LOB is already in use (20), I'm waiting 1 sec (20110720081918). My name: pid 28901462 on ulvcp743p (SIDadm)
WARNING: /usr/sap/trans/tmp/SID.LOB is already in use (30), I'm waiting 5 sec (20110720081951). My name: pid 28901462 on ulvcp743p (SIDadm)
ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
STOP TRANSMIT BUFFER ENTR SID g 0000 20110720082014              ADMIN        ulvcp743p
ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18

Hi ckary,
Thanks for your post. It looks as if your computer is not seeing the driver
calls and thus it gives the error saying it cannot complete that task. Does
this happen with any other example programs you run using DAQmx? What version
of DAQmx do you have? I would first recommend getting the latest DAQmx driver
version, 8.7.1. You can find this at the following link below.
Drivers and Updates
Please post back if installing the latest driver does not
fix the problem.
Corby_B

TMS error: "Offline Call could not access file as supposed (see.."

i am running an NSP Netweaver on top of Windows 7. when performing RSTPTEST, I get the following error, right at the end. All the other tests are fine.
It looks like an permissions problem with possibly the file system, but i have tried giving all to all.
I have been trying for days to fix this.
if anyone can help, please do.
i have checked log files, and about the only useful one is the SLOG1019 which gives me one line
FATAL No stdout redirectio NSP 0000 20100510080609 BCUSER pc
when i try to distribute the TMS i also get "Transport control program tp ended with error code 0212" again, looks like an authorization error.
i am not a basis person, more developer.
any pointers and help, cheers
Edited by: gingle on May 10, 2010 8:13 AM

Hi gingle,
Meaning of returncode 212 is:
could not access file as supposed (see SLOG for more details)
Is there any error in the corresponding SLOG?
You can find the SLOGxxxx.<SID> under usr/sap/trans/log.
Best Regards
Julia

TMS error configuration - TMS_CFG_CREATE_A2D_REQUEST

Hello,
I´m with an error during the configuration of TMS of a new system QAS (Quality system) to the transport domain. When I went to txcode STMS, it show me the screen of TMS configuration where I filled the fields of Domain Controller, which is the DEV system! But it show me the following error:
Command: TMS_MGR_CONFIGURE_CLIENT
Service: Communication Interface
Start: Online
Function: TMS_CFG_CREATE_A2D_REQUEST
Message: RFC_COMMUNICATION_FAILURE
Description:
RFC communications error with system/destination DOM_CTL
Error when opening an RFC connection (CPIC-CALL:
'ThSAPOCMINIT' : cmRc=20 thRc=497#Unable to determi
I show you a print screen of this error in the following link:
http://img52.imageshack.us/img52/1195/tmserror.jpg
The platform of this system is an IBM iSeries.
This maybe is related with permissions or something... no?
Can you help me please?
Best regards,
JDimas

Hello,
I got reply from both servers when I ping from IP address but when but when I did this ping with hostname, they doesn't respond! (perhaps because it is not mapped in the .hosts file? ... am I right?)
But now... an important thing/information! Both machines are iSeries platforms... (this is the first time that I have to make a TMS configuration between two iSeries machines/systems). But, as I read in installation guide, there are a procedure to do this type of configuration - Setting Up the Transport Directory chapter, which is linked to SAP Note 117465.
But as I mentioned above, I don´t have any experience in this type of TMS configuration on iSeries servers, so can you guys guide me and let me know some critical information in way to do this configuration?
Kind regards,
JDimas

TMS error message

I got the error message when I open the TMS users button, this seems to be DB user table got problem.
What can I check from the TMS and SQL DB?
the TMS version is 14.3.2
the detail error message :

Hi,
This is obviously a TMS bug, but I don't think it is an issue we have seen before.
The table TMS tries to read from when someone is accessing the Users page is dbo.AclUser. I tried provoking the page crash you are seeing by manipulating the database directly; I was able to get a similar page crash by setting the TimeZoneId value of a user to NULL, but the stack trace was slightly different, so that's probably not what you are seeing.
The AclUser table contains a lot of data about your users, so I don't think we should discuss its contents in a public web forum. I recommend opening a service request with TAC, and providing a copy of your database. It shouldn't be too hard to see what's wrong in the AclUser table once TAC gets a database copy.
Regards,
Kjetil

TMS Error ....Urgent

Hi All,
We are getting error in STMS.......production system is showing RED.
Log details-:
Command TMS_MGR_READ_TRANSPORT_QUEUE could not be executed
An error occurred in the TMS transport service.
System:         PRD.DOMAIN_DEV
Function:       TMS_TP_SHOW_BUFFER
Error:          TP_REPORTED_ERROR
while opening system tplog
Log file '/usr/sap/trans/log' could not be opened
The file could not be opened for reading. This can have various causes:
o The file does not exist.
   The transport control program tp only creates the log files when they
   are needed. If you have not yet made any exports or imports then no
   log files will have been created.
                                                                                Note
    Note that the log files ALOG and SLOG are recreated weekly. (For
    details on this, see the Online Help for the transport control
    program tp).
o The file is read-protected.
o You cannot access the directory.
Transport control program tp ends with error code 0212
                                                                                Message no. XT200
                                                                                Diagnosis
                                                                                An error occurred when executing a tp command.
                                                                                Command:        SHOWPARAMS PRD pf=/usr/sap/trans/bin/TPPARAM
      Return code:    0212
      Error text:     could not access file as supposed
                                                                                System response
                                                                                Processing was terminated.
Thanks & Regards,
Prashant.

Hello Pranshant,
Are you using a common transport directory for the transport domain.If this is the case as you have givne the symbolic link to the other transport directory is not required and then if you remove the link and activate the configuration it will start working.
Other wise you may give the production system's <sidadm> access to the transport directoy and check.i am not sure about this option.
Also i did not understand the requriement of that link to the transport directory of production as all the changes are happening in DEV and you are transporting down the landscape.If this a unix box then the trans directory should be NFS mounted on production system and not a link and if its a windows box then there should be a network share.
Thanks and Regards,
-Bijesh.

TMS - Error when opening an RFC connection

Hi,
TMS communication error with TMSADM@<SID>.DOMAIN_<SID>
Message no. XT153
Diagnosis
There was an error during communication with the RFC destination
TMSADM@<SID>.DOMAIN_<SID>
System Response
The exact error message of the system is:
Error when opening an RFC connection
Procedure
The function terminates.
Procedure for System Administration
Check your TMS configuration with the transaction STMS.
when i check RFC connections through sm59 its working fine.
plz advise.
Thanks in advance.

try to reconfigure STMS easy way to soluve your problem
or goto STMS -> system overview try to update the configuration
Samrat

Sneak Preview NW2004s ABAP TMS Error

Hello,
I've installed the Sneak Preview NW2004s ABAP Preview. I've changed the default language to german. When I now try to import a transport request via TMS I get the following error "Wählen Sie eine der installierten Sprachen aus" which means "select on of the installed languages" in english. Any idea? The importqueue in the TMS shows a red flash.
Thanx for ny help
Stefan

hi Stefan,
First define the STMS in your ABAP server. Overview -> Transport Routes. Here you can define your Transport routes. Do this after changing your language to the one u used during your Installation!
post me if this solves your problem...
Regards
ak

TMS ERROR CODE 208

Hi .

Dispatcher is grayed out while stating sap system
Here is the content of trace file dev_disp
Mon Dec 28 14:12:23 2009
ERROR => W0 (pid 2480) died [dpxxdisp.c   14241]
ERROR => W1 (pid 1676) died [dpxxdisp.c   14241]
ERROR => W2 (pid 3416) died [dpxxdisp.c   14241]
ERROR => W3 (pid 3888) died [dpxxdisp.c   14241]
ERROR => W4 (pid 3900) died [dpxxdisp.c   14241]
ERROR => W5 (pid 3908) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 3912) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 3924) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 3928) died [dpxxdisp.c   14241]
ERROR => W9 (pid 3936) died [dpxxdisp.c   14241]
ERROR => W10 (pid 832) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 160) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 660) died [dpxxdisp.c   14241]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
Plz help me out wt the issue

Tms error

Dear Sir,
while i config stms path for all the 3system landscape.example J1 ,J2,J3 server.Only J2 setup is showing some error in stms t-code error is (error whwen import quaue.)please tell me the solution of this error.
Regards,
K.Ramamoorthy

Dear Sir,
Here J3 is domain config has done.
1. J1 &j3 has done stms path config .But when try to connect in J2 in stms t-code it showing the error (error when reading import queaue)
can u pleasetell me in 3system lanscape how to configure the stms setup for all servers.
Regards,
K.Ramamoorthy

TMS 14.3.2 - No HTTPS Response from devices (again) - Looks like permissions issues (but possibly down to NetBIOS over TCP/IP)

Hi All,
Sometime ago I posted regarding an issue I was seeing on our TMS , where most of the remote devices seemingly showed up as loosing remote connection (no HTTPS Response - https://supportforums.cisco.com/discussion/12290956/tms-lost-https-communciation-devices-not-really). However, I could not figure out the root cause of the error, and now I have managed to break things again - probably due to a Java upgrade which broke TMSPE (see https://supportforums.cisco.com/discussion/12404166/looks-latest-update-java-8-update-31-will-break-tmspe-11).
However, I thought I would look at little more closely this time to see if I could figure out the problem.
I am seeing a lot of entries in the Security Log in TMS that seem to indicated that my the account used from a TMSPE connection has a bad or invalid password (this is set in "Administrative Tools --> Configuration --> Provisioning Extension Settings", but this password is correct (I can log into TMS with this account, and reset and restarted services etc).
The computer attempted to validate the credentials for an account.
Authentication Package: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0
Logon Account: tmspeconnect
Source Workstation: TMS
Error Code: 0xc0000064
and
An account failed to log on.
Subject:
Security ID: IIS APPPOOL\TMSNet40AppPool
Account Name: TMSNet40AppPool
Account Domain: IIS APPPOOL
Logon ID: 0x214b6
Logon Type: 8
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: tmspeconnect
Account Domain: TMS
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc0000064
Process Information:
Caller Process ID: 0x860
Caller Process Name: C:\Windows\SysWOW64\inetsrv\w3wp.exe
Network Information:
Workstation Name: TMS
Source Network Address: 127.0.0.1
Source Port: 62114
Detailed Authentication Information:
Logon Process: Advapi
Authentication Package: Negotiate
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
I just wanted to check this like file/folder NTFS permissions, or any specific IIS permission . Is there a list of NTFS folder permissions for which the TMS required with regard to the "IIS APPPOOL", and perhaps what may need to be check in IIS?
Oddly, the error list above refers the our "TMSPEConnect" account from the TMS domain, however this is incorrect - TMS is the machine name. Still we ARE seeing similar error which reference the actual domain name, such as:
An account failed to log on.
Subject:
Security ID: IIS APPPOOL\TMSNet40AppPool
Account Name: TMSNet40AppPool
Account Domain: IIS APPPOOL
Logon ID: 0x49e55
Logon Type: 8
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: tmspeconnect
Account Domain: mydomain
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc000006a
Process Information:
Caller Process ID: 0xb18
Caller Process Name: C:\Windows\SysWOW64\inetsrv\w3wp.exe
Network Information:
Workstation Name: TMS
Source Network Address: 1.1.1.1 (changed external IP)
Source Port: 47620
Detailed Authentication Information:
Logon Process: Advapi
Authentication Package: Negotiate
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Idea welcome.
Cheers
Chris

Hi all,
After a long a fraught weekend trying to fix things, I am not that much further on, but I am beginning to understand what it isn't........ I think :(
It looks as though the "DatabaseScanning" service, or anything that runs under the credentials of the "nt authority\network service" seems to have a problem.
The Audit log show lot of entries where services such as"TMSWebPublic" running under the ISS Application pool "tmsnet40apppool", and actions launched under our own credential appear to communicate just fine with the device, only for the 'network service' to time out the connection a short while later. The same goes for some (not all) of the Phone book updates, which also looks as though it runs under the credentials of the 'Network Service' account.
26/01/2015 08:30:54
nt authority\network service
Update
System
our-ctrl1
System status
NoResponse
TMSDatabaseScannerService
26/01/2015 08:30:54
nt authority\network service
Update
System
our-ctrl1
Connection status
NoHTTPSResponse
TMSDatabaseScannerService
26/01/2015 08:29:06
tmsnet40apppool
Update
System
our-ctr1l
System status
Idle
TMSWebPublic
26/01/2015 08:29:06
tmsnet40apppool
Update
System
our-ctrl1
Connection status
OK
TMSWebPublic
However, I still don't know at this point is this is related to the actual TMS front end, something to do with the domain and policies that have been applied to TMS, or the actual database, or even just communication with the back end database??? I did try running the services under a domain user (service) account, but then ran into other issues as I couldn't log into TMS.
BTW, removing TMS, and IIS and reinstalling did fix my second issue relating to the 'Communication Errors'.
Chris

TMS_BCI_START_SERVICE fails

When I schedule the TMS job (following a system copy of Production into my QA system) using STMS, it runs the first time successfully but cancels every subsequent time. I cannot view the job log, but if I look at the TMS error log, I'm getting a "TMS_BCI_GET_JOBINFO_FAILED"(Program TMS_BCI_START_SERVICE has no selection screens).
Per 398589, I'm using STMS to schedule the job. I'm trying to select "Other Period" and schedule this for 10 minutes, but I HAVE to go to SM37 and change the periodicity, since Other Period won't work (it defaults to a daily job).
Any suggestions? I'm running NW 2004S ECC6.0
Message was edited by:
Michael Gibbs

Hello Michael,
This seems simple to me. After system copy you would have probably executed SE06 transaction. That would have led to deletion of TMS RFC destinations. This leads to an inconsistency at times with job control records and then you can get TMS_BCI_GET_JOBINFO_FAILED.
Better thing in this case is to cancel every single instance of import job and schedule it from the beginning.
Regards.
Ruchit

Calling function module from solman

Hi Experts,
I created one function module in solution manager with remote enabled type, how to call that rfc into development sysytem.
Regards,
Thiru. R

hi,
may be this link
Re: TMS Error In Change Request Management
can prove useful to u ... in solving ur issue
regards,
prashanti

Error generated while transporting a request using TMS

Dear Techies,
While transporting a request iam getting an error message
"Transport control program tp ended with error code 0247"
Errors: add to buffer has problems with data- and/or cofile
Iam not getting any information to resolve the problem. Further In devlopment system iam unable to see the old requests and also new one whcih i have created and released. I tried adding the request manually in TMS, whcih resulted in the above mentioned error.Please suggest some solution

are you able see the objects when you are expanding the request/task
Also please check the followings & let us know the result
1. Goto transaction STMS. Menu verview -> Systems. Select system and Menu Check --> All available option
2. Goto transaction STMS. Menu verview -> Transport Routes, Menu Configuration --> Check --> All option
One more thing are you facing this problem with only for one specific request or for all requests
Edited by: Mrinal Das on Jan 5, 2011 3:10 PM

Error Message from VM TMS 13.0

Dear all,
We have receive some error message from the VM TMS 13.0, that is installed a month ago.
<ErrorCode 1000>
Message="Faulting application name: TMSSNMPService.exe, version: 1.0.4008.29206, time stamp: 0x4d12159c Faulting module name: mscorlib.ni.dll, version: 4.0.30319.18444, time stamp: 0x52717d7e Exception code: 0xc0000005 Fault offset: 0x0000000000cd5bf7 Faulting process id: 0x116c Faulting application start time: 0x01cf68076319516f Faulting application path: C:\\Program Files (x86)\\TANDBERG\\TMS\\Services\\TMSSNMPService.exeFaulting module path: C:\\Windows\\assembly\\NativeImages_v4.0.30319_64\\mscorlib\\abf62e6545d2802fc60286678a67e6bf\\mscorlib.ni.dll Report Id: 371654ff-d3fb-11e3-98ea-005056b1027a"
<ErrorCode 1026>
Message="Application: TMSSNMPService.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.AccessViolationException Stack: at System.Runtime.InteropServices.Marshal.ReadInt64(IntPtr, Int32) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.VbToObject(Tandberg.CommLib.SnmpLib.WinSnmp.SMIVALUE ByRef) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.VblToHashtable(IntPtr) at Tandberg.CommLib.SnmpLib.TrapHandling.SnmpTrapHandler.OnSnmpMessage(IntPtr, IntPtr, Int32, UInt32, UInt32, IntPtr)"
<ErrorCode 7031>
Message="The TMSSnmpService service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds:
Any comments on the above error?
Best Regards,
Ben Lai

This seems to be happening on 14.2.2 as well.
Component: Application Error
Severity: Warning
Event class: /App/Failed
Device class: /Server/Windows/WMI/TMS
Systems: None
Summary: Faulting application name: wmiprvse.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc794
Faulting module name: ole32.dll, version: 6.1.7600.16624, time stamp: 0x4c2984e3
Exception code: 0xc0000005
Fault offset: 0x00000000000393a9
Faulting process id:
Message:
Faulting application name: wmiprvse.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc794
Faulting module name: ole32.dll, version: 6.1.7600.16624, time stamp: 0x4c2984e3
Exception code: 0xc0000005
Fault offset: 0x00000000000393a9
Faulting process id: 0x39c4
Faulting application start time: 0x01d04d36eb9b6c36
Faulting application path: C:\Windows\system32\wbem\wmiprvse.exe
Faulting module path: C:\Windows\system32\ole32.dll
Report Id: e334bd6f-b990-11e4-aa1d-842b2b6be310
http://tools.cisco.com/security/center/viewAlert.x?alertId=29142

TMS error FTP_FAILED

Similar Messages

Maybe you are looking for