TMS Problem

we currently have this problem with one of our systems.
The TMS queue in SAP is empty, yet there are transport requests in the buffer at OS level. what could be the cause of this?

Hi Trevor,
Check for the transport logs for all these transports you are find in buffer as OS level.
Suppose you checking the buffer of a system "X". Then in the transport logs you will most probably find that all these transports have been deleted from the buffer of system "X". In such a case it means that while update has been done at OS level the same has not got reflected at OS level.
It can happen sometimes. You need to clean up the buffer in this case.
Regards.
Ruchit.

Similar Messages

TMS problem with ECC 6.0

Dear Global Support,
After hardware resizing we have successfully installed ECC 6.0 and
successfully performed DB restoration.
Now the problem lies with TMS as after installation performing necessary post installtion activity
we have configured TMS. As per all TMS check STMS configuration is fine. Even tp and domain
profile are generated.
But issues lies while releasing change request as after realease no data or cofile are populated in
trans/data or trans/cofile.
Even slog is not been generated. Kindly look into this and advice the needful.
Regards,
Partha

Hi Partha,
Is there only one system in the transport landscape at present?
If the transport has been built up in STMS properly, there should be no problem to export.
But you can create a virtual system and create the "transport route" accordingly.
Then when you release a transport, the data and cofiles should be generated.
Is the transport a local transport?
Do you get a message "LOCAL REQUEST .......... released(objects no longer locked)   "
Local request can not be transported so releasing a local request does
not export file to operating level.
If you want to transport this released local change request, you
can create a new reqeust of tranport type "Transport of Copies" from
SE01 and include the objects in <local transport number>.
Then you can transport the content of <local transport> by this newly created
request.
Hope this helps,
Paul

TMS problem - queue is empty

Hello,
Our systems are ECC5.0 on windows/oracle. We have installed production system. Now we have a problem in our test system. The TMS queue is empty in test system, the queues of the development and production systems are ok. We have a central transport directory.
There are transport requests in data and cofile at OS level.
DIR_TRANS is pointing ok, cofile and data file are in the right
locations. I can't transport requests manually by clicking on
Extras -> Other requests -> Add, because after I choose the request,nothing appears in the queue .
When I check from TMS (systems -> check : Connection test, Transport directory, Transport tool) there are no errors.
DIR_TRANS is the same with TRANSDIR.
Settings for DIR_TRANS are correct in AL11.
Do you have any ideea what could be the cause of this?
It is very important to us, because we have GO-LIVE on 01st of January.
Thank you

Hi,
1) Queue --> Check --> Consistency -
OK
2) I can't add a request to the queue
3) I don't have any end mark. In queue -> move end mark it is in grey ... maybe because the queue is empty.
The alert from TMS alert viewer:
Command TMS_MGR_TRANSMIT_TR_QUEUE
Service Transport Service
Start    Online
Function TMS_TP_COMMIT_BUFFER
Message TP_REPORTED_ERROR
Transport control program tp ended with error code 0211
Errors: no info about transport request found
ERROR: tpsettainfo: Cofile F:\usr\sap\trans\cofiles\KMARK.STO does not exist
ERROR: EXIT(16) -> process ID is: 5296
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0211
Output from tools called by tp:
   Thank you

Using Charm at cutover to handle deleted objects

Hello experts,
System landscape contains of dual landscap meaning one project ladnscape and one maintenance landscape.
Project: D01>T01>Q01 ( no charm )
Maint: DEV>QAS>PRD ( charm is used )
At project Go Live cutover is done från Project line Q01 to Maint DEV.
All transports imported in Q01 is added manually to import queue of Maint DEV and imported.
After that 1 WB request and 1 Cust. request is created via charm and all objects from the
cutover transports imported are added to those chamr transports. Then charm handles the
transport process through the maint landscape up to production.
Problem
=======
If cutover transports contains deletion of objects, the transports are imported to DEV maint, object is deleted.
When including all objects from cutover transports into the two charm transports it will then ofcourse fail during
releae of the transports on the deleted objects as they no longer exist in DEV maint. This is of course not a specific
charm problem but a TMS problem. Or not even a problem it is as it should be.
Question
========
Is there any way of handling this scenario, can charm in any way handle this ?
Thanks,

I checked the link you provided and that descibes as you say a dual landscape but i don't think it will solve this problem.
As i understand you setup the retrofit process one-way and that would be Maint DEV --> Project DEV.
That is all fine keeping all changes done in maintenance landscape in synk with project landscape.
But the cutover process is manual, as also the drawing states, meaning adding project landscape transports
to Maint DEV system import queue and import them. But if a transport contains objects with the delete flag it will be
deleted in the Maint DEV system. All fine that far. But when you then inlcude all cutover transports objects into a charm transport it will not check if object still exist in Maint DEV system ( wich it does not anymore ), it will include evertyhing that is part of the cutover transports. Meaning you include objects with delete flag on it. When you release this now in Maint DEV system what it does is to check if object exist in TADIR, it does not. You can fool this release process by manually create an entry in TADIR, release the transport, then delete the entry in TADIR. But if you have cutover transports with many deletions, then this is not the way to go.
So please explain how the retrofit procedure would help in the scenarion at cutover and delete flag.
Thanks.

Tp process - job RDDFDBCK

Hi there,
We have a TMS problem.
The import queue of QAS is with status "running" (icon truck), but it doesn't have nobody transport being executed.
tp system log:
WARNING: System QRP. Warning. 20080318161835 :
WARNING: Background job not running properly. Function: Q Jobcount: 1330
Please check the system. Use transactions SM21, SM37, SM50.
Anybody knows the RDDFDBCK job?
Thanks,
Dany Anderson

Hi
There are lof of RDD* jobs (RDDFDBCK is one of them) will run shen u start any import depending on your import step.
That totally depends on th job RDDIMPDP job to execute those.
So check your system has sufficent Backfround process to run these RDD* jobs.
If u have sufficient WP's then reimport the request.
To reimport got import monitor and right click on the TR say Delete, it will delete the currently used semaphors for that TR.
and check entried in TRBAT and TRJOB tables if there are entries available then delete those entries and start ur import again.
Reward if Helpful.

Problem with TMS setup in HA systems

Dear colleagues,
Our team have installed a new production environmnent to ECC in HA. We have a ASCS in cluster and two dialog instance in each server(local instance).
A virtual host GPPR3CIB and two instances in local, node GPPR301 and node GPPR302. This is an ECC 6.0 on Windows 2003 Server and SQL server 2005.
The architecture is as follows:
- GPPR301 node:
   - Virtual ASCS ASCS_0 (message server)
   - ABAP Primary Instance PPR301_1 (disp+work)
   - ERS (Enqueue replication server) instace ERS_10
- GPPR302 node:
   -ABAP Additional Instance PPR302_2 (disp+work)
   -Virtual Database Instance GPPR3DB
   -ERS (Enqueue replication server) Instance ERS_10
Once the installation is complete you need to apply SAP Note No. 943334 - "TMS setup in high availability systems" to set up high availability STMS. The problem is to distribute the configuration after running
the report " 'TMS_MGR_LOADBALANCING" described in SAP note.
The message indicates problems trying to run the command tp.exe. It has followed the note No. 1010990 and we have checked the folder permissions of the kernel but the problem persists.
Any information or help regarding this type of setup would be welcome.
Thanks.

Hi,
We have solved the problem with STMS. After several tests, the problem was in the parameter SAPLOCALHOSTFULL. This parameter must be assigned the hostname of the local system for each profile instance. If you've assigned the virtual host in the cluster generates the error in the distribution of the STMS.
Regards.

Problem with TMS config

Hi all,
I have a problem with my TMS config.
When I adjust the transport queue, the "No system found in another group for import queue QAS" message appears.
My landscape includes a DEV-QAS and a PRD systems.
can somebody help me?
thanks in advance.

Hello,
I have the same problem. I just forund the alert from RZ20. When we are doing transport and checking RFC connections from SM59, seems to be all working fine. So I am not sure where this alert is coming from.
Command TMS_MGR_READ_TRANSPORT_QUEUE
Service Transport Service
Start Online
Function TMS_MGR_TRANSMIT_TR_QUEUE
Message TRANSMIT_QUEUE_FAILED
No system found in another group for import queue <SID>
I run into this thread but there is no information on how the problem got resolved. Please let me know if you have any ideas.
Regards,
Tony

STMS problem in TMS Alerts

Hello all, i am getting beloww error in STMS alerts, does any bosy know how to correct it?
I re-created TMS configuration and also regenerated RFC destination and reset user TMSADM but nothing worked.
I am trying to import a client 900 on a different isolated system from another sap system (systems are based upon ECC6 EHP4).
Error occurred in ETT TMS communication
    Message no. XT149
Diagnosis
    An error occurred in the TMS communication layer of the following SAP
    system:
       System:         ETT.DOMAIN_ETT(000)
       Function:       TMS_CC_READ_CCCFLOW_OF_TRKORR
       Error:          SERVICE_NOT_AVAILABLE ()
System Response
    The function terminates.
Procedure
    Check your transport control station configuration with transaction STMS.
I think this problem is related to STMS, it does not have any connection to Client import. can anybody plese suggest me what to do?
We are on MS windows 2003 server with SQL server 2005 as backend.
Mani

thanks Tomas and Sanujit, i am importing it at OS level now its running. i think there is some problem at SAP Gui level i am not able to add request to import buffer from STMS_import >> Extras >> other requests >> add ( i tried with a test request). but i was able to import the same request from OS level. so after successfully importing test request i tried to run client import at OS level, its running fine untill now.
can anybody tell me how i can check if the import is still runnign at OS level or not or ther is any error. I have client import file size around 8 GB, dos anybody know how much time it will take to complete at OS level.
For your information here is the log error from DEV_W0 and DEV_RD file, there is nothing in DEV_RFC latest file.
DEV_W0
C Sat Sep 18 19:47:27 2010
C OpenOledbConnection: line 23839. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C
C Sat Sep 18 19:47:42 2010
C OpenOledbConnection: line 23839. hr: 0x8000ffff Login timeout expired
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Login timeout expired
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err -1, sev 0), SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF].
C Procname: [OpenOledbConnection - no proc]
C sloledb.cpp [OpenOledbConnection,line 23839]: Error/Message: (err 0, sev 0), Invalid connection string attribute
C Procname: [OpenOledbConnection - no proc]
C failed to establish conn to np:SAP5\ETT.
C Retrying without protocol specifier: SAP5\ETT
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.3042.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 104 bytes, 20000 names (32960000 bytes), 500 dynamic statements (2876000 bytes), total 35836104 bytes
C Using shared procedure name cache SAP5_ETT_ETTETT_ETT_MEM initialized by another process.
C Connected to db server : [SAP5\ETT] server_used : [SAP5\ETT], dbname: ETT, dbuser: ett
C pn_id:SAP5_ETT_ETTETT_ETT
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20100918 194657 SAP5\ETT
B Successful reconnect for connection:
B 0: name = R/3, con_id = 000000000 state = ACTIVE      , perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
B ***LOG BYY=> work process left reconnect status [dblink#1 @ 733] [dblink 0733 ]
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Sat Sep 18 19:47:43 2010
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP_BEG entered.
A ** RABAX: level LEV_RX_WRITE_SNAP_BEG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A
A Sat Sep 18 19:47:44 2010
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_WRITE_SNAP_END entered.
A ** RABAX: level LEV_RX_WRITE_SNAP_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Sat Sep 18 19:47:44 2010
A
A ABAP Program SAPMSSY2                                .
A Source RSBTCTRC                                 Line 60.
A Error Code DBIF_REPO_INTERNAL_ERROR.
A Module $Id: //bas/701_REL/src/krn/runt/abload5.c#1 $ SAP.
A Function db_info Line 251.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A Internal error when accessing program CX_SY_OPEN_SQL_DB=============CP        ..
A
M *** WARNING => PfStatWrite: missing STAT_END for opcode STAT_REPLOAD [pfxxstat.c   4127]
X Tue Sep 21 01:35:36 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X
X Tue Sep 21 01:35:45 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X
X Tue Sep 21 01:37:36 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X
X Tue Sep 21 01:37:45 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X
X Tue Sep 21 01:37:53 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X
X Tue Sep 21 01:39:36 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
A
A Tue Sep 21 01:42:07 2010
A GENER request remote generation: RSTMSTPL.
X
X Tue Sep 21 01:48:01 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X
X Tue Sep 21 01:48:36 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
A
A Tue Sep 21 02:02:54 2010
A GENER starting remote generation: CL_OO_CTS=====================CP (requested by W13).
X
X Tue Sep 21 02:05:45 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
X
X Tue Sep 21 02:05:54 2010
X *** ERROR => EmActiveData: Invalid Context Handle -1 [emxx.c       2214]
N
N Tue Sep 21 03:07:30 2010
N ***LOG TZ1=> System time zone found in TTZCU is not valid.
[sign.c       1268]
this is from DEV_RD file
trc file: "dev_rd", trc level: 1, release: "701"
Sat Sep 18 19:25:36 2010
***LOG S00=> GwInitReader, gateway started ( 5144) [gwxxrd.c     1757]
systemid   562 (PC with Windows NT)
relno      7010
patchlevel 0
patchno    11
intno      20020600
make:      multithreaded, Unicode, 64 bit, optimized
pid        5144
gateway runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
gateway (version=701.2008.08.22)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
Bind service sapgw00 (socket) to port 3300
GwPrintMyHostAddr: my host addresses are :
1 : [172.16.9.8] sap5.hq1.nakisa.net (HOSTNAME)
2 : [127.0.0.1] sap5.hq1.nakisa.net (LOCALHOST)
Full qualified hostname = sap5.hq1.nakisa.net
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpShMCreate: sizeof(wp_adm)          29792     (1752)
DpShMCreate: sizeof(tm_adm)          5912704     (29416)
DpShMCreate: sizeof(wp_ca_adm)          24064     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm)          552080     (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1864)
DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000EE30050, size: 6614144)
DpShMCreate: allocated sys_adm at 000000000EE30050
DpShMCreate: allocated wp_adm at 000000000EE32270
DpShMCreate: allocated tm_adm_list at 000000000EE396D0
DpShMCreate: allocated tm_adm at 000000000EE39730
DpShMCreate: allocated appc_ca_adm at 000000000F3E2DB0
DpShMCreate: allocated comm_adm at 000000000F3E4CF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F46B980
DpShMCreate: allocated gw_adm at 000000000F46BA00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F46BA30
MtxInit: -2 0 0
Sat Sep 18 19:26:26 2010
GwDpInit: attached to gw_adm at 000000000F46BA00
Mani

TMS Conference Control Center (CCC) problem

I'm using TMS v14.5.0 to monitor/manage our environment. When in the CCC, the left pane (shows My Watch List, All Video conferences and Reservation, etc.) collapses randomly. In other words, I hit the plus sign (+) next to Active to see what's going on. Frequently, as soon as I click on an individual conference, the list collapses. My guess is that it's a java problem, but wanted to see what others had to say (and how to fix). Java version is v6 (build 1.6.0_23-b05). EI v11.0.9600.17501. Firefox v32.0.2. TMS running on virtual Win2012 server. The problem happens when using IE or Firefox. We had the same problem with TMS v13.2.1 and server v2003, but it seems worse now. We do not use CUCM or Prime Collaboration.

I had a similar problem and we upgraded TMS's Java to V 7.51 and made sure that the machines accessing TMS CCC were on at least version 7 and we had no further issues. I never had the auto collapse happen but we did have some very interesting issues.

TMs Provisioning AD Field Mappings & import problem?

I've deployed TMS 14.6.1 & TMSPE v1.4.
In TMS > Admin Tools > Provisioning I've adjusted "AD Filed Mappings for New User Imports" the file "Office Phone" to "ipPhone".
when I import users and I check for a imported user (Toggele Details) the Office Phone is still mapped to "telephoneNumber"...
Is this a known problem?
rgds, Geert.

I did a test and swapped the the "telephoneNumber" and "mobile" fields, and after I restarted the PE service and did another user import, the fields were swapped in the user's profile. It didn't update any users right away, it was when I re-saved the AD configuration and performed another import, that it updated all the users with the changed fields.

TMS and JAVA problem

I have TMS version 14.5 and Java 8 (update 25)
All of a sudden , when i go to TMS->Conference control Center,
i enter my credentials and then get Error Click for detail
I have tried this in Internet Explorer, Firefox , Chrome->same behaviour
I have added my TMS server to the Security Exception Site List in Java.
I also have installed Java 32 bit and 64bit version .
Any idea how i could resolve this?

No worries Patrick.
Further to my response to the Original Poster - I'd also strongly suggest you empty out your browser and also your Java cache - having an older file in the cache often contributes to these sorts of issues.
Another possible solution could be trying both http and https and seeing if there is a difference. Also see if you can bypass any proxy or web caching server as these can also interfere.
For what it's worth - I also have two PCs here with pretty much idential builds (Win8.1 64-bit, Java 8u25 32 and 64 bit installed) - one works fine when using https, and the other I have to use http to get it to work. And different behaviour/errors on both when it doesn't work. We can pretty much rule out the TMS server as being the issue as it works both ways on different machines, but on these specific two PCs , there are some unknown differences that are causing issues - we're still investigating these ones, but the majority of our other PCs work fine with no errors reported. So, if you're having problems on one PC, try another - or try from a RDP session on the TMS server itself to determine where your issue actually is.
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

TMS 3 system Landscap problem

Hi All,
I have configured 3 system landscape (DV1, DEV, VED). Here, DV1 is the Domain controller (win2003, MSSQL, 4.6c), DEV is the Quality system (Win2003, MSSQL, ECC6) and VED is the production system (Win2003, MSSQL, ECC6).
I have successfully configured the TMS and Check is done without errors. I have used three systems in a group to establish route. Transport layer is ZDV1. Now the problem is, whenever I release transport request from DV1( domain controller), It is not appearing in the DEV (quality ) system.
Can you please tell me where I have gone wrong?

Arun,
you could check the following:
Under Configuration Status, are all three systems activated?
Under Transport Routes, do you see both DEV and VED?
Make sure you have saved, activated and distributed the new model after your change.
Also - as an outside shot, if the transport request(s) were created before you configured TMS, check the Target System for that particular transport(s) and ensure that it is DEV.

I am sonu v s from india...i am a apple id user...now i have a problem regarding this apple ID...i forget my apple ID security Qn...so i can't access and purchase any apps by using my apple ID..4 tms i frwd my reqst using itune apps store bt no solutn

I am sonu v s from india...i am a apple id user...now i have a problem regarding this apple ID...i forget my apple ID security question...so i can't access and purchase any apps by using my apple ID..4 times i frwd my reqst using itune apps store but i can't get any solution....many times i my try to call u bt there is no response from ur custmr support group...pls kindly give me any solution

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

Problem in build tms prog

I want build tms for connect to oracle8i, at $TUXDIR dir using command "buildtms
-o .\bin\TMS_ORA8i -r Oracle_XA" and out put error info"/home/mafx/bea/tuxedo8.0/lib/libengine.so:
the use of `tmpnam_r' is dangerous, better use `mkstemp' /home/mafx/bea/tuxedo8.0/lib/libengine.so:
the use of `tempnam' is dangerous, better use `mkstemp'";
the RM file content is:
TUXEDO/D:tuxd_switch:-lrms -lfs TUXEDO/SQL:tuxsql_switch:-lsql -lusort -lrms -lfs
NONE:tmnull_switch: TUXEDO/QM:tuxq_switch:-lqm -ltmib # # BEA makes no attempt
to keep the information in the following samples # up to date. To make sure you
have correct and complete information for # your platform and RM version, please
consult your RM vendor. # # ORACLE 7 Oracle_XA:xaosw:-L${ORACLE_HOME}/lib -lclntsh
# INFORMIX-Online 5 INFORMIX-OnLine:infx_xa_switch:${INFORMIXDIR}/lib/esql/libinfxxa.a
-lx # INFORMIX-Online 6 #INFORMIX-OnLine:infx_xa_switch:${INFORMIXDIR}/lib/esql/libinfxxa.a
${INFORMIXDIR}/lib/esql/libsql.a ${INFORMIX DIR}/lib/libasf.a ${INFORMIXDIR}/lib/netlib.a
${INFORMIXDIR}/lib/esql/libgen.a ${INFORMIXDIR}/lib/esql/libos.a -lsocket -lm
#ident "@(#)RM 1.3"
I don't know what happen!
Thanks!
jack

jack,
This looks like a warning to me, caused by a function used internally by
Tuxedo's libengine library. If it's just a warning, I would think that you can
safely ignore it.
If not, you will have to open a support case to get this resolved.
Regards,
Peter.
jack wrote:
I want build tms for connect to oracle8i, at $TUXDIR dir using command "buildtms
-o .\bin\TMS_ORA8i -r Oracle_XA" and out put error info"/home/mafx/bea/tuxedo8.0/lib/libengine.so:
the use of `tmpnam_r' is dangerous, better use `mkstemp' /home/mafx/bea/tuxedo8.0/lib/libengine.so:
the use of `tempnam' is dangerous, better use `mkstemp'";
the RM file content is:
TUXEDO/D:tuxd_switch:-lrms -lfs TUXEDO/SQL:tuxsql_switch:-lsql -lusort -lrms -lfs
NONE:tmnull_switch: TUXEDO/QM:tuxq_switch:-lqm -ltmib # # BEA makes no attempt
to keep the information in the following samples # up to date. To make sure you
have correct and complete information for # your platform and RM version, please
consult your RM vendor. # # ORACLE 7 Oracle_XA:xaosw:-L${ORACLE_HOME}/lib -lclntsh
# INFORMIX-Online 5 INFORMIX-OnLine:infx_xa_switch:${INFORMIXDIR}/lib/esql/libinfxxa.a
-lx # INFORMIX-Online 6 #INFORMIX-OnLine:infx_xa_switch:${INFORMIXDIR}/lib/esql/libinfxxa.a
${INFORMIXDIR}/lib/esql/libsql.a ${INFORMIX DIR}/lib/libasf.a ${INFORMIXDIR}/lib/netlib.a
${INFORMIXDIR}/lib/esql/libgen.a ${INFORMIXDIR}/lib/esql/libos.a -lsocket -lm
#ident "@(#)RM 1.3"
I don't know what happen!
Thanks!
jack

Problem Configuring Single-System TMS in new install of SM 7.1

Going through post install steps of new Solution Manager 7.1 system; SID is SMV
Follwed the instructions to set up the Transport Management System in Client 000. The consistency check returns all green checkmarks.
User TMSADM exists in client 000, Profiles TP_DOMAIN_SMV.PFL and TP_DOMAIN_SMV.BAK exist along with DEFAULT.CFG in usr\sap\trans\bin.
STMS config created RFC's TMSADM-SMV.DOMAIN_SMV and TMSSUP-SMV.DOMAIN_SMV, and they both pass the "Connection Test". ("@" replaced by "-" in this message so they don't look like E-Mail addresses)
Used SM59 to create an RFC for SMV that passes the "Connection Test"
However, using SOLMAN_SETUP, the step to "Check TMS Configuration" fails with message "No valid RFC destination exists for system SMV"
2 questions:
1. Does that matter?
2. How can I get a green light on this check?
Thanks in advance for your time and consideration.

Hi Nicholas,
I'm not sure. The only thing I know for sure is that it is 7.1
I attempted to do the update, and got to the screen where it would take me from ISS (initial) to SPS03, so I guess the answer is no, we're not on SP03.
I have not been able to accomplish the update because my version of SPAM is not quite up-to-date. I downloaded a later version of SPAM but it got put into my download basket as requiring approval. If I understand it correctly, Maintenance Optimizer is the tool I need to approve it, but that transaction isn't yet available in our system. So I'm trying to figure that out right now.
I haven't finished all of the Post Install activities yet, as you can see from this thread, and apparently those are necessary before updating to SPS03.
As you can see, I'm a rookie at basis, but I'm all there is here. My 10 years of SAP Development haven't prepared me for the dark side of SAP.
Thanks Nicholas.

TMS Problem

Similar Messages

Maybe you are looking for